Features

• Use in place of standard insert to accommodate a 7- or 8-inch dado set
• Fits Delta contractor saws and right tilt unisaws for safer use of dado sets
• Installs easily using existing screws

Reviews (4)

Fits a 36-650
It's so hard finding the right part from Delta's site or here. This is the one you need for a Delta 36-650. Some of the other reviewers mentioned having trouble with the fit, mine worked fine.

Insert Doesn't Fit!!!
I own a Delta 10" Professional model table saw. One of the first and most necessary accessories I bought was a dado blade which entailed buying the table insert. After double checking model numbers, etc. to make sure I was buying the right thing, I got it home and it didn't fit. I had to use my angle grinder and quite a bit of time to make it fit. The insert works great now, but it was extremely frustrating having to "custom fit" it to my table saw, especially when the model number was supposed to fit properly.

did not fit Delta Contractor saw correctly
I got this insert for my Delta contractor saw.
It is the correct model insert for this saw, just not made exactly right.
The insert was slightly to large for the opening on the saw and would not fit in.
I had to use a bench grinder to remove just a little material from around the insert before it would fit.
Now that it fits, it works well.

Dado Table Insert
I have been using a wooden table insert for years with my 8 inch Delta stacked dado head and have always had troubles with it depending on the weather. It would strink or expand and very seldom sit flat. Not anymore, this insert will take all those problems away, and for the time committment, you could not build a better one for the price. Why mess around making something like this when you can spend that precious time building a masterpiece. I highly recommend this and I wish I would have bought it with the dado head cutter. ... Read more

Features

• Allows one dust collector to be used with multiple machines
• Includes one 4-inch by 20-foot hose, 3 elbows, 2 T connectors
• 8 quick connectors, 4 blast gates
• 2 4-inch hose to hose connectors, 12 wall clamps, 14 hose clamps
• Hardware packs for wall clamps, screws, anchors

Reviews (1)

Good choice for a small shop.
After years of using a shop vac for dust collection in my small woodworking shop, I decided too spring for a dust collection system. I settled on a Delta AP 400 which has proved to be adequate, though just barely. I intended to plumb the collector system by buying the bits and pieces individually and improvising as much as possible to keep the cost down. However, I stumbled onto the Delta AP050 accessory kit on sale at Lowes. It seemed to have everything I would need in one box, so convenience won out over economy. The kit comes with four blast gates and twenty feet of hose as well as all the couplings, clamps and hardware to install the system. The only thing I will need to purchase are four inch to two inch adapters to match my router table and jointer. Accually, the price is not too unreasonable considering the number of blast gates, tee and elbow fittings, and clamps included. All in all, the kit is complete, of good quality, and not too expensive. Based on what I've seen so far, it's a good option for a small or medium shop. Now for the one beef I have that cost it a fifth star, there are no instructions, suggestions, or tips on how to set up a dust collection system. Admittedly, this is a minor complaint since there are many books and magazine articles on the subject. ... Read more

Reviews (1)

Upgrade?
I bought a pair of these with the idea of making my saw more accurate. Boy was I wrong. The edges are so far from square that they are not as true as the stamped steel extensions. If you buy these you should expect to go to a machine shop to have them machined square or use a bunch of shims to make the table topflat. This company has been making this kind of thing for decades, so you would think by now they would be able to get it right. Very disappointing.Brad Scher ... Read more

Features

• 120 Grit
• Bulk roll, enough for 14 abrasive changes

Features

• Easy, bolt-together assembly
• Fits Delta 22-540 and 22-560 Planers for proper working height
• Converts bench top unit into a floor unit to free up workbench space
• Steel construction for durability and stability
• Plastic feet for stability

Reviews (6)

Steady and Practical
I purchased a portable planer and found that I needed that extra work space that could be freed up by using a stand. I found this stand to be tip resistant without taking up too much space. It assembled quickly with the help of my 2 and 3 year old sons.

Great Stand -- Solid as a rock
I bought this stand for my 12 1/2" Delta 22-560 planer and it's great. It was super easy to assemble and it's rock solid. The working height is about perfect.

I considered building my own stand but a woodworking show vendor recommended this stand and he was right. If you have a 12" or 12-1/2" Delta planer, this is a great platform for it. The top is some kind of MDF but and it's hard as a rock. If you have another brand of planer and it fits on this top, I suspect it would be easy to drill mounting holes for it. The Delta 22-560 is 23 5/8" x 21 1/2" (L x W) and there's a couple of inches to spare in each dimension on the stand. I'd imagine most portable planers in the 12" to 13" class will fit.

Apparently there is also a mobile base specifically made for this stand (Delta PN:50-323) but I've not seen it in person. Since my shop is on the small side, I may buy the mobile base as well.

I will add an adjustable height roller table to use as an out feed surface and that should complete the planer workstation in my shop.

Great product if all the parts came together
I ordered it and when it came the box was opened and parts were missing. I figured maybe atleast they would have put it back in the box or UPS wouldn't deliver it but i was wrong. I have called and are suppose to recieve the parts. We'll see when i get them. Other then that I like delta products very much.

optional stand
Delta is now offering a free stand with a purchase of a model no. 22-565 planer. Thisis for your information only. You may want to review this situation. If this stand is the same one your offering, then my review is that this is a strong durable stand at a good price. Easy to assemble and smart looking.
Regards
Thomas a Lawrence

Delta Stand for portable planner
For the price of this stand, you can't beat it! sturdy as a rock.If after mounting your planner on this unit, if it tips over on you, your pulling it over with a truck! First class merchandise ... Read more

Features

• Fits Delta 37-070 6-inch Bench Jointer
• High-speed steel construction for sharpness
• 2-pack

Reviews (1)

Easy replacement
These knives make replacing knives cheap and easy for the Delta 37-070K jointer - no grinding or sharpening. ... Read more

Features

• 16-by-8-inch die cast aluminum extension wing for extra cutting capacity
• Includes mounting hardware for easy installation
• Fits Bench Saw models 36-540 and 36-550

Reviews (8)

Easy installation, great product!
Installation took 15 minutes to get the piece flush with the table top as well as the sliding fence. Works great! Very sturdy...looking into attaching another extension onto this extension.

Not Bad
This accessory worked that way I wanted. The price was a little high but I needed to increase my cutting capacity.

Table saw extension review
Well, what can I say. If you are planning to use your saw to rip wider than 11 1/2 inches, you need to have this extension. I am impressed with how sturdy the extension is when bolted to the table. Most table extensions I have seen have been flimsy and unsafe in my opinion. This one is pretty good when you finally get it attatched. I am overall pleased with the product, however; I had a few problems installing it. Here are my gripes:

I think Delta should have used holes in the connecting side instead of slots. I had a problem lining it up with the saw table. The front edge of the extension didn't line up with my table and when the the fence was clamped down over the seam, it was not parallel to the blade. I had to file about 1/8 " off of the front inside edges of the mounting slots in order to bring the two pieces flush.

The cheap little flat sided washers provided in the hardware kit should be wider and thicker. When I tightened the bolts, the washers pressed into the slots and the extension lifted above the level of the table every single time. It took a while to get it lined up.

When I had it lined up as best as I could, the joint was still not perfectly smooth. We all know that this is important. I had to block sand the joint down with a piece of 80 grit sand paper to make the two surfaces join smoothly. Tip: If you sand lightly from front to back, you can duplicate the scratched alluminum surface that is already in the table and when you are done, it looks and feels pretty good.

Delta did an outstanding job at making the extension match the original table except for the self adhesive ruler. It looks like it came from a totally different saw and leaves a 2 inch gap between the markings. Although I always gage my fence with a tape measure, it would have looked better if it matched.

Finally I thought the price was way too high. ... Amazon was the best deal I found though, taking into consideration the free shipping.

Go ahead and buy this one. You will be able to rip a solid 19 1/2 inches using it. It took me about an hour to do all of the above things I mentioned and I ended up with a pretty nice looking saw which is also much more functional than it was when I bought it. I hope this helps.

Works fine
Unlike some of the other reviews, my unit attached straightforwardly, and the fence moves smoothly from table to extension. Takes a little care to attach correctly (I used a pair of C clamps to hold it in place), and the nuts are in an awkward position when tightening (I tipped the saw over onto its side), but no big problem.

It doesn't fit well.
The rip fence doesn't track well with this extension. This is a major flaw that makes the extension less useful. The cost of the extension is way out of line for the quality. ... Read more

Features

• Includes fence, carriage assembly, front guide bar, table frame, legs, and mounting hardware
• Built to last with anodized aluminum extrusions two-position fence face
• Easy-gliding fence body to handle quick, repetitive cut-off work, precision ripping and squaring cuts
• Three-point locking system and hairline pointer with built-in steel tape to assure fence is parallel to blade and accurate to within 1/64 of an inch
• Ripping capability both to the right and left of blade

Features

• Complete with clamp bar, front and rear posts, 2 sliding clamp screws
• Fits Delta machines with 3/8-by-3/4-inch miter slots for angled cutting and shaping
• 120-degree swing with positive stops at 45 and 90 degrees for quick set up
• Provides more accurate straight and angled cut off work
• Includes clamp kit 34-568 to secure stock for more accurate cutting

Features

• Clamps materials up to 6" wide
• Quick-release design for faster set ups
• Cast iron body has mounting slots for easy installation
• Jaws are pre-drilled for auxiliary jaw plates

Reviews (4)

Get a grip
This low cost vise will hold whatever you need to drill a hole in on your drill press. The quick release lets you change pieces fast for repetitive drilling. Unfortunatly, it does not fit the Delta DP300 bench drill press .... It is much too large and the mounting holes do not line up...

Too large for 990 bench drill press
Although it's advertised to fit the Delta 990 press, it does not. The bolt holes in the vise simply will not line up square w/ the slots in the drill press table. I can c-clamp it to the table of the press and it works fine, but no one wants to have to make such basic compromises with a brand new tool. I'm going to return it and look for the 4" vise instead.
The two stars reflects my frustration with the false advertising, not the quality of the product. I agree with the prior reviewers regarding the quality.

better then expected
Seeing that this is a 6 inch vise for under thirty dollars I though there was a quality issue for it being so cheap. Not so. The quick release feature is very handy. And it's so big it doubles as a bench vise when I need it. If your drill press is big enough, get this vise.

Great addition to a Delta Drill Press
The Quick Release Vise is a great addition to any delta drill press. It makes drilling very easy and accurate, since you aren't trying to use clamps or your hands to hold onto wood or metal. This vise does not come with bolts to attach it to your drill press, you need to buy those from your local hardware store. I'd also suggest making wood blocks to put on the walls of the vise, so you don't mess up what you want to drill. Have a rag on hand to wipe the non-rust oil off when you open the vise shipping box. Overall it is a good addition to any drill press. ... Read more

Features

• Use in place of standard insert to accommodate a 6-inch dado set
• Fits Delta Contractor Saws and Right Tilt Unisaws for safer use of dado sets
• Installs easily using existing screws for quick set up

Reviews (4)

does what it says...but
it does what it is suppose to do. but, i regret my purchase. if you have some 1/2" stock laying around make your own and save the money. either jig saw or use a router and trim bit and make a copy of your original insert. get some set screws, tap the holes(for leveling) and you are set. i made mine in about 5 minutes out of mdf. works great and i can make more for different size dado setups.

Dado insert doesn't fit
I purchased the insert with certainty from both Amazon.com and Delta that this is the right insert for my saw. There is only one problem, it is too large to fit in the saw. It is approximately 1/4" too long. In comparing it with the insert that came with the saw it is visibly larger. The only solution appears to be to grind it down as other reviewers have noted on the insert for the 8" Dado sets. While it can be done, it is disappointing for something that should simply drop in.

Its an insert.
What can I say? I laughed. I cried. I cut dados.

Just right
The dado insert is for my Delta Contractor Saw. It fits very snugly-- It requires a bit of force to un-seat the insert from the saw's throat. It could be that once the new paint is weared off, it could be easier. But I think it is better that way than too loose. The price is reasonable and I highly recommend it. ... Read more

Features

• Securely holds work for more accurate cutting
• Keeps hands away from the blade for added safety
• Slips into pre-drilled hole in the base for quick set up
• Fits Delta 36-070, 36-075, 36-220, and 36-225 10-inch miter saws

Reviews (1)

Does the job
I picked up a pair of these clamps to use with my Delta 36-255L Twinlaser saw. (They are designed to work with that model, too; why Amazon's site doesn't reflect what is clearly printed on the product box is a mystery. Delta customer service directed me to this part number.)

The clamps work great. They fit the saw table well and provide plenty of hold down force for bigger pieces of stock.

The price is reasonable, too. Each of these is about half as expensive as the DeWalt accessory clamps are for their saws.

I hold back one star because there is no quick release feature. Hey, there's always some room for improvement. ... Read more

Features

• Mounts directly to band saw table to facilitate ripping
• Lever locking mechanism for easy adjustment
• Fits Delta 28-180, 28-185, and 28-150 Bench Band Saws

Reviews (8)

Used
I knew that this was going to be a less than great product but I did not expect it to be used. They didnt even bother to clean the sawdust out of it!

Not bad for the money
For the money, this is not a bad item. Other reviewers are correct that it doesn't come with directions, but page 17 of the PDF manual that is linked on Amazon's product page (should be above if you are reading this review)shows the 5 steps needed to square it up. Took me less than 5 minutes. Basically, clamp it down, and loosen the two screws on top until it is square (the manual says to use the miter guage slot to check for square-ness, I used my Swanson Speed Square), then tighten the two screws. You can adjust how tight it clamps to the table by rotating the flip/lock lever until it is as tight as you need. That's it!

Again, for the price I paid, not a bad addition for my 9" band saw. When I get my 14" professional band saw, I'll get a better fence.

Don't buy
Fence was delivered yesterday. No directions on it's use and I can't make it fit securly to the table. I do not recommend it. Will be returning it for credit.

Don't Waste Your Money
Even after shimming this fence and spending a lot of time making adjustments it just doesn't do the job. It does not clamp onto the table tightly and moves when any pressure is applied. You're better off using a peice of scrap wood clamped to the table top. I took the fence to the Delta repair center to see if they could offer advice and they had never even seen this product.

Half-way decent fence for a lackluster band saw
I bought this fence in hopes that it MIGHT improve the performance on my delta 8" band saw. Aside from the face that the band saw is really poorly designed, the fence is just as clumsy a design. It is very stiff to move back and forth on the table and will move unless you tighten it alot. And if you do tighten it alot you have to be Hulk Hogan to push the locking clamp down. It is only about 2" high. However since this is being used on a really bad saw to begin with, how could you possibly expect more. ... Read more

Features

• Installs easily using carriage bolts
• Can be installed on lathes, worktables, and more
• 4" diameter outlet for use with standard hoses

Reviews (1)

Wide Mouth Suction
If the machine does not have a DC port, then this is the thing you want. It's about 5" x 9" with a 4" hose connection, best of all, it has bolt holes so it can be connected to your work bench or a mount.

I have two collection intakes in use, one on the lathe and the other by the drill press. I plan on adding a third to the end of the workbench, just sweep the debris to the end of the table to be sucked up. ... Read more

Features

• Adapts Delta 22-560 12-1/2-inch planer for use with a dust collector
• Allows you to maintain a cleaner, safer work environment
• Installs easily in place of existing dust chute for quick set up
• Outlet fits 4-inch dust collector hose for efficient chip collection

Reviews (6)

Works great - get one.
Hooks up easy, works great, get one.

Fits easy and collects most of the chips
It took me about five minutes to put this on my planer. It gets about 99% of the dust and I'm using a 6hp, 18.6 gallon shop vac.

A hint for you if you plan on using a shop vac with this. You will need a 4 - 2 1/4 reducer. This will fit your shop vac just fine, all you need is a 2 1/2 splice and I found this at my local home center with the shop vac accessories. The 4" part of this is another story. The end of the chute is 4" and the reducer end is 4", they don't fit together they just butt up against each other and I couldn't find any kind of 4" splice. The solution for this is to use a dust collector hose but they are expensive so I bought a dryer vent hose. Normally that hose would collapse but since I'm only using to keep both of these parts together there is nothing to collapse. It works great and will save you from having to buy 20' of dust collector hose to only use 3".

PS Don't forget to get two 4" clamps to hold everything together.

Delta 50-445 4" Dust Collector Chute (For Model 22-560)
This Delta Dust Collector Chute is a must! No directions for installation, but installed easily once figured out. The chute must be removed to change planer knives ... a minor inconvenience. I had concerns about how to connect the 4" chute exhaust to my 2-1/4" shop-vac hose. Problem solved at my local plumbing store.

"Ya gotta have this"
This is a must have, if you are using the Delta 22-560 planer. It not only collects the dust, but a good 90% of the chips as well. The fit is excellent and only takes a couple of minutes to install. If you are using a wet/vac for dust control it may not work as well, but if you have a 4" system this is the cat's meow.I'm going to two stage my collection system so the chips fall into a "can", because you can really fill the bag on the vac quickly when you are planing a lot of material. Delta got this one right.

Don't Forget This!
Planers create a lot of sawdust/shavings. Get this and hook it up to a dust collector. Only the smallest amount of shavings coming out after that. It really helps keep the shop and your projects clean. ... Read more

Features

• Use in place of standard insert to accommodate a 8-inch dado set
• Fits Delta Left Tilt Unisaws for safer use of dado sets
• Installs easily using existing screws for quick set up

Reviews (2)

YUP
It's smooth and fits well. Pins in ends keep it centered. It's red. It works. Yup...aaayup.

Uuhhh, it fits. And it guards....
What can one really say? It fits well, the slot is nicely slotted, and it does its' blade guarding duties well. Nice adjustment and levelling features. ... Read more

Features

• Two-year limited warranty on machines, parts, and accessories
• Adapts 50-278 Mobile Base for use with a 52-inch Unifence
• Steel construction for durability
• Foot-operated lever provides easy raising and lowering of base
• Inside dimensions 15-1/2 by 41 inches for a custom fit

Reviews (1)

Works perfectly
What's there to say. It fit perfectly and all 400+ pounds of saw rolls around easily. ... Read more