Amazon.com

If you’re reading this, you’re probably already a Dremel owner, and we don’t have to tell you how incredibly versatile this little tool is. Adding the drill press attachment will expand your Dremel capabilities, turning it into a drill press as well as a great stationary sanding tool. We wouldn’t use this in place of a regular drill press, mind you, but it has its own range of uses that a benchtop or floor model isn’t suited for. Precise micro holes are a cinch with the Dremel in this stand; it’s smooth-riding and sturdy, and you Dremel users know how well it drives the smallest bits, the kind a regular drill press would swallow up. We like that you can mount the Dremel horizontally as well, so your Dremel becomes a mini stationary sander—just bring your workpiece to it. We think there are parts, like the base, that could be beefier, but for the price, we like it.--Kris Jensen-Van Heste ... Read more

Features

• For use with rotary tool models 275, 285, 395, 398 and 780
• Convert your rotary tool into a drill press
• Includes rack & pinion feed lever, large base and many other features of larger units
• Easily modifies to a tool holder for added versatility
• Rotary tool not included

Reviews (10)

Very useful for hobbies or smaller projects.
I too enjoy assembling R/C kits, and I find this tool useful for that purpose. In fact, I first learned about this dremel "attachment" when I saw it at my local hobby shop. I considered buying a "real" 8 inch (table-top) drill press, but I live in an apartment, so stashing it away when not in use was a real issue for me. I settled for the dremel, and it works fine for its intended purpose. Yes, I agree that the casting on the base is pretty lousy, and there is some play in it which could break a smaller diameter bit. But, considering that this is the only good alternative to a bulky drill press, I can live with it.

Making Dremel more versatile, turn it into a drill press!
The Dremel Drill Press Attachment makes your Dremel tool more versatile by turning it into a mini drill press. The attachment allows you to drill holes and do other precise work without the worry of 'going crooked' as you are working. The attachment keeps the tool lined up and allows you to control it with one hand. The handle allows complete control just like a large drill press. Of course, this is using a Dremel tool and should not be considered a replacement for a large drill press. I highly recommend this attachment and find it very useful for smaller projects.

Low End JUNK
I purchased one of these to make my dremel into a drill press for wood - mostly softwood and it has been a terrible experience. The collars that attach the tool do not allow for perfect square alignment and the dremel many times cant seat a bit so there is no wobble. I was disappointed with this tool. I found that MicroMark makes a small hobby drill press (as well as other great tools) that is sturdy, reliable and excellent. It maycost more then the dremel but you do get what you pay for.

Good for PCB drilling
I bought this attachment for drilling 0.7mm holes on printed circuit boards. It had a little side-play, but rotating the height guide eliminated the problem. I use it with a Black & Decker RTX (yes, it works if you replace the top holding screw with a longer one and force the holding ring a little bit) and the Dremel multi-chuck for holding such small drill bits, and it works great.

I couldn't imagine using a standard 10" drill press with a 1/2" chuck along with 0.7mm (less than 1/32") drill bits, and the drill press adapters for conventional hand drills had WAY too much play.

Scroll Saw Worker
I highly recommend this tool attachment. I am scroll sawing very fine lines and need to drill with a #72 drill bit. This drill press attachment used with the Dremel #395 tool and the keyless chuck makes it a breeze. It keeps the hole straight and is very easy to place the bit on the exact spot. ... Read more

Features

• 6 Amp. Capacity
• Non-skid base
• Variable speed from 0 to full RPM
• For use with Models 245, 250, 260, 270, 275, 280, Moto-Flex Tool 232 and 732 Flex Tool.

Reviews (1)

Have two hands available to run your Dremel!
The foot controller is a great addition to a Dremel tool. It allows you to concentrate the use of your hands on the tool and project without worrying about operating the switch on with your hand. The foot control allows you to keep your hands on the tool and project, yet still being able to turn the Dremel off when completed. This is even more useful when cutting objects. You will have no more worries about a running Dremel with a cutoff wheel and a loose piece from your project falling as your hands are holding both the whole time. Just from a safety standpoint this is a great attachment to have. ... Read more

Features

• Length of handpiece is 5 1/4"
• For use with DREMEL Heavy-Duty Flex Shaft Tool
• Features a sealed ball bearing construction for long life, and a knurled aluminum body for a non-slip grip
• Accepts bits that have a shank diameter from 3/32" - 1/4"
• Includes a 1/8" and 1/4" collet, wrench, and pin for changing accessories

Features

• Wheel designed to hold shape and never break
• Cutting wheel is completely coated with diamond particles
• Makes super smooth, fine cuts
• Cuts, saws, carves, sharpens and files
• Ideal for marble, concrete, brick, porcelain, ceramics, epoxy and woods

Product Description

5 Pack, 80 Grit Sanding Tubes, With Fabric Backing For Longer Life, Used With Sanding Contour. ... Read more

Features

• 5 Pack, 80 Grit Sanding Tubes, With Fabric Backing For Longer Life, Used With Sanding Contour.

Product Description

Dremel 6062 A system of hooks and loops enables these abrasive-covered sheets to attach to the Detail Sanding Pad or Shutter /Extension Pad. They make sanding flat surfaces a breeze compared to hand sanding and are available in sets of five, with three different abrasive grits available. ... Read more

Features

• 220 grit

Features

• Nickel-Cadmium
• Long lasting

Reviews (2)

Does what's expected
I needed an extra battery so that I could have an extra when mine was charging. The second one was as good as the first and has performed admirably. The first is 4 years old and performs like when it was new.

hardly rechargeable
Because the battery that came with my Dremel cordless multi-tool consistently died quickly, I thought I'd get a duplicate as a back-up. Now, however, I have two Dremel batteries that last about 30 seconds after re-charging. If only I held onto the receipt. . . ... Read more

Features

• Includes, 9901, 9903, 9905, 9909, 9912 contours