Features

• Interchangeable battery works with all VersaPak products
• No memory
• Can be recharged over 300 times
• Two year home use warranty

Reviews (11)

VersaPak is underated
True, they are only 3.6 volts each, and the life is not terribly long. However, the VersaPak line is extremely versatile and affordable. The common misconception is that the batteries should last longer...but you have to consider the use -- these small, light-weight batteries were never meant to build a house, sand a basketball court, or cut through concrete, they were made to be small, versatile, affordable and light-weight. VersaPak IS NOT a Contractor-grade powertool. I highly suggest investing in several sets of batteries if you use your tools often for long periods of time (more than 10 mins straight). But consider the alternative, a larger, heavier tool that costs 3 times as much (or more), and that goes for the battery packs too. The fact is, if you aren't getting enough power from a VersaPak tool, it was not designed for you, you should consider one of B&D's other higher voltage, contractor-grade powertools.

Buy Versapak GOLD instead.
The silver version of these batteries just dont last. You will get 60% MORE life from the Gold batteries for a few dollars more. I have many B&D tools that run these batteries, including the "Snake Light"...the Silver will go dead with one days use, as compared to the Gold, which will last up to 5 full days of use. You can get these for the same price at Lowes and Home Cheapo. You'll pay tax of course, but it evens out after subtracting the cost of (not) shipping.

Gold batteries much better
I would highly suggest using the "Gold" batteries. Since purchasing my tools, I have recycled all the Silver batteries and use the Gold batteries exclusively. NiCd batteries are simply too much of a hassle. They have to be drained regularly and simply don't have the capacity of NiMH ones. The NiMH batteries provide reasonably good power and performance. The only drawback is the higher rate of self discharge when sitting idle.

NiCd Batteries ALL Have Memory - Use NiMH Instead
My advice to all of you who made negative comments about the standard VP-100 Versapak "Silver" battery is to replace it with the VP-110 Versapak "Gold" battery. It costs about 30% more than the Sliver but offers 60% more energy (watts x time) and little or no memory effect. Be sure to recycle your old Silver batteries. They contain very toxic chemicals, such as cadmium, which are best kept out of landfills. Black & Decker and Sears have even prepaid the recylcing costs. Just figure the cost of a separate Gold battery into the cost of the tool, at least until manufacturers stop shipping the Silver Versapaks altogether. Read on for the thinking behind this advice.

The Versapak Silver battery, which comes with nearly all Versapak-powered B&D as well as similar Sears Craftsman products, have "battery memory" despite what the creative folks who write the product listings at Amazon and other websites want you to believe. As talented as these folks are, they have not and cannot repeal the laws of battery chemistry. All batteries based on the nickel-cadmium (NiCd) design have memory which means they stop accepting a full charge if they are continually recharged before being fully discharged. Think of it as that "always full feeling" you get if you do a lot of snacking around the house.

The newer battery chemistry is nickel-metal hydride or NiMH. Although not as new as the lithium ion or the even newer lithium polymer batteries found in cell phones and laptop computers, the NiMH design delivers more energy and weighs significantly less than NiCd. The Versapak Gold version is said to offer 60% more battery life than the Versapak Silver version. Most importantly, NiMH batteries suffer little or no memory effect. That makes them useful and valuable even without the big improvement in tool running time.

NiCd batteries work perfectly well for those applications that drain the battery to its discharge voltage. For example, a construction worker will use a NiCd battery in a power drill until the drill motor won't turn. At that point the battery has been discharged to the point where the memory effect during recharge will be minimal or non-existent. He or she simply pops in a fully charged NiCd pack and drops fully discharged battery on the charger.

By the way, by "discharged" I do not mean zero battery voltage. Discharging a NiCd by taking it to zero volts, either by shorting out the terminals (a very dangerous idea) or by putting a high wattage resistor across it, will effectively destroy the battery. There are many NiCd conditioners around that properly discharge these batteries, but most consumers are too busy to use them on a regular basis. Now back to our story...

NiCd batteries are terrible in those applications where the particular cordless tool is used for a few minutes and then put back on its charger. For example, think of a Versapak-powered DustBuster or ScumBuster. Fortunately, the latter doesn't holster the tool on its charger, which means its battery is more likely to get discharged before being recharged. The ScumBuster also comes with a separate charger because of the shock danger of charging a typically wet tool in its holster.

The DustBuster, unfortunately, is charged in its holster. A quick pick up with the ol' 'Buster and then back in the holster pretty much guarantees most owners will see the memory effect in as little as a few weeks. Performance will just get worse and worse until it will only run for a few minutes before it's dead again.

If you just can't bring yourself to recycle those old Silver Versapaks and go for the Gold, I suggest you don't plug in the DustBuster holder's wall wart. When its Versapaks are pretty much dead (as in discharged), put them in a separate charger. Leave them in there overnight. It takes about 15-18 hours to bring a Silver battery to full charge.

As I said at the outset, the better idea for the DustBuster or any other short use tool is to simply replace the Silver Versapaks with the Golds. Yes, it's a big hit for the DustBuster which probably didn't cost that much to begin with, but it will run for years just like it was brand new.

Have Memory; Don't Last
Unlike what B&D cliams, these batteries do have memory and don't last. Plan on replacing them about every 2 or 3 years (assuming you use and charge them to the letter). The standard battery chargers take 3 to 6 hours to charge these which is too long considering their typical life of only 5 or 10 minutes in use. On the good side, there is a lot of VersaPak stuff out there. The batteries are more suited to the flashlights than the power tools. The Gold versions work much better in the power tools. ... Read more

Features

• Tool free jam release allows user to quickly fix jammed screw
• Extended attachment allows user to drive screws standing up and avoid bending back or working on knees
• Accepts every day loose screws, Feeder tube holds up to 20 screws at a time
• Fits to all 3/8" and 1/2" corded and cordless drills,Tool free bit change alllows user to switch from Phillips to Square bits without using a tool
• 3 depth adjustments for driving screws flush and countersinking screws

Features

• Made from heavy-gauge steel and work surface supports up to 450 pounds
• Hand Truck and portable work surface in one
• Rugged steel-frame construction holds up to 200 pounds as a hand truck
• 9-inch toe plate locks in place
• Stows neatly when not in use and folds flat for compact storage or hang on a wall

Features

• Hand Truck supports up to 125 lbs.
• Allows tools and materials to be transported
• Damage and stain resistent;easily wiped clean to protect work material
• Folds for easy storage
• Heavyweight steel construction supports up to 350 lbs.

Features

• Pre-hardened, rust resistant steel blades stay sharp longer
• Lightweight, compact, and easy to use
• Lock-on button for continuous running
• Lock-off button prevents accidental starting
• Cord retention prevents trimmer from coming unplugged

Reviews (2)

Great little unit.
This is what happens when engineering gets it right. Works good, small, light weight, plenty of power. I trimmed 4 full size shrubs in just a few minutes, should have ditched the manual shears years ago. Excellent value. Get one, you'll like it.

A simple and easy wonder!!
It's light and easy to use. Anyone can work it. The safety of the trimmer is first class. ... Read more

Features

• Includes High Speed Steel drill bits, Spade Bits, Masonry Bits and More
• Self Standing case included

Product Description

This 50 piece drilling and screwdriving set features the most popular sizes in one carrying case. Drills clean, accurate holes in metal, wood and plastic surfaces. Includes: ... Read more

Features

• Includes an assortment of drilling, screwdriving and nut driving accessories
• Storage case included

Reviews (1)

strong and reliable
I am always using my drill and have a lazy habit of not drilling pilot holes, but using the driver bits to drive screws into 2x4s straight from the drill. I have stripped the screw slots on galvanized screws, but these bits don't even have a scratch on them - AND they can pull the damaged screws right back out of the wood.

Just about every drill bit and screwdriver attachment the regular hobbyist will ever need, in an easy to use case w/ snap-in slots for each bit and driver and the case keeps moisture away from your bits. ... Read more

Product Description

18v Battery Pack spring loaded firestorm 2 year warranty fsb18 ... Read more

Features

• 18v Battery Pack
• spring loaded
• firestorm cordless
• 2 year warranty
• fsb18

Product Description

Features:Non stick sole plate/soft grip.1200 watts.Variable steam.Vertical steam/surge steam.Spray mist/pivot cord. ... Read more

Features

• Non stick sole plate/soft grip
• 1200 watts
• Variable steam
• Vertical steam/surge steam
• Spray mist/pivot cord

Reviews (1)

For 13 bucks, this iron is a steamin' machine!
OK, for this price you're getting a relatively small iron.But it's a real iron.Much bigger than a travel iron.

Anyway, I needed a spare iron for quick de-wrinkling sessions at my girlfriend's place.(I live out of a duffle bag when I'm there and she doesn't own an iron!)I own a top-o-the-line B&D iron which I love, so I went for this inexpensive "younger cousin."

Bottom line:I recommend it.Once it gets going (a couple of minutes tops), it really whoooshes out the steam!I fill it up, crank it up, and use it for Dockers and Timberland cotton shirts.The steam blows through so well I only have to do one side!It's a time-saving wrinkle killer!

As for finesse jobs on other fabrics, I couldn't tell you.But for hammering out wrinkles in cotton, it's great.I recommend it and it's so inexpensive, you can't go wrong. ... Read more

Features

• Selectable display shows your measurements
• Memory chip stores measurement information
• Electronically detects distances by emitting sonic waves and then measures how long it takes for them to return to the Marksman
• Pivoting head makes it easy to take measurements at many different angles

Features

• Low noise design
• Powerful 140 MPH max. blow speed easily clears surfaces
• Adjustable shoulder strap reduces weight
• Large switch for easy on/off
• Cord retention with pigtail prevents blower from coming unplugged

Product Description

7-1/4" Circular Saw Kit, Powerful 12A Motor, 5000 RPM, Roller Bearing Construction For Longer Life, Ergonomic Design With Rubber Front & Rear Handles For Improved Cutting Control & Comfort, Convenient On Board Wrench Storage, 45°ree. Bevel & Calibrated ... Read more

Features

• Calibrated depth adjustment for quick, accurate cuts
• Powerful 13 amp motor provides the power and torque for cross cuts and rip cuts in all woods
• Ergonomically designed front and rear assist handles with soft grips for maximum comfort and control
• Storage case provides easy carrying and protected storage;A 18 tooth carbide blade provides fast and smooth cutting ideal for tough, everyday jobs
• Bevel adjustment adjusts from 0-45 degrees for accurate angled cuts

Amazon.com Review

When it comes to versatility, few tools can match the Black & Decker MT1203B cordless multitool featuring interchangeable drill/driver, jig saw, and sander/polisher heads. Each attachment locks securely into the ergonomic base quickly and with little effort. As a drill/driver, the multitool features a 24-position, keyless chuck with variable speeds ranging from 0 to 700 rpm. An electric brake stops the chuck in less than one second, for even better control. The jig saw features a tool-less quick-clamp blade changing system, a 45 degree bevel, and a blade support roller for more accurate cuts and a longer blade life. It cuts through wood, thin-gauge sheet metal, plastic, or composite tile, with speeds ranging from 0 to 3,000 spm. As a sander/polisher, the multitool works much like Black & Decker's Mouse sander. Its hook-and-loop fastening system makes accessory changes quick and easy, while the included detailing pad provides a fine finish in even the tightest spaces. --Carl Thress ... Read more

Features

• Soft cloth carrying bag for easy storage
• One tool, three attachments, for drilling/driving, sanding/polishing, and cutting
• Quick-clamp blade change system for fast blade changes
• Detail sanding pad for reaching into tight corners
• Variable-speed drill/driver operates at 0-700 rpm

Reviews (1)

Seems like an awsome deal!
While I never used the product mentioned, I own a Black and Decker 18v drill and am totally satisfied. Considering all the tools, this product seems like a real score for the price. I would love a gift like this...

At 700 RPM and 12v, the drill might only be useful for light to medium duty work (cutting doorknob holes or drilling into metal seems like it would be pushing it) but for easy work like making holes in the wall to hang stuff or assembling Ikea furniture it should be adequate. ... Read more

Product Description

* Cyclonic action filter system means more power longer because dirt won't stick to the filter * 15.6 volt motor provides power for all cleaning jobs * HEPA filtration removes 99.97% of particles such as dust mites and ragweed pollen from the air flow * Quick slide charging system provides ultimate convenience of use * Power lasts longer with 50% more filter surface * 3 stage filtration provides clean air exhaust * Wheel Clean System instantly improves performance * Full 2 Year Warranty * Voltage: 15.6 V * Air Watts: 30 watts * Capacity: 23 oz. * Replacement Filters: VF100H Model: CHV1500 ... Read more

Features

• Cyclonic action filter system means more power longer because dirt won't stick to the filter
• HEPA filtration removes 99
• Quick slide charging system provides ultimate convenience of use
• Power lasts longer with 50% more filter surface

Features

• The Mobile Workshop includes a Workmate 375, Power Pack tool bag, FireStorm 18 Volt Drill, 18 Volt Circular Saw, 18 Volt Cut Saw, 18 Volt Vacuum, 18 Volt Work Light, Bulls Eye Laser Level & Stud Finder, two 18 Volt batteries and a charger
• 18-Volt 7 Tool Mobile Workshop with storage system
• Power Pak tool bag features a power strip with six outlets and a 15' power cord for versatilty
• Mobile Workshop helps you cut, drill, drive, line, find studs, light your project area and clean up
• Mobile Workshop keeps your tools in one place where you can charge them as well

Reviews (3)

Great 18 Volt tool kit
My kit is very similar but not quite the same it's the FSC618K-2

Anyway I've read some reviews that say the chuck on the drill can't hold a bit at all and its only real use is as an 18-volt screwdriver. I've run a 1/2" bit to the hilt into a 4X4 several times just to test it, and there was no slippage at all. I'm not really sold on the pop off chuck, but it has saved time when I was building some books shelves recently. But I would say that 280 lbs. of torque is plenty for most applications, but have to admit that I am a novice and use the drill/driver around the house. I've only had it a little over a month but have played around with it, and am very impressed with it. Especially when compared to most of the other 18 volt drill/drivers out there. The circular saw cuts 2X4 with no problem and I have used it to cut about 10, 1"X6 "shelf's to length with plenty of power left over. The Cut Saw is just cool. I haven't had time to use it much but in your hands it feels as if it has enough power to do just about anything you might need it to do. The vacuum is a step up from the basic dust buster does a fine job and has great battery life. The flashlight is bright and I've used it to drain the partially used batteries before recharging. My kit is a little different in that I do not have the laser level/stud finder or the work table and the tool bag looks smaller, but this is as close as to what I have as I could find. My kit included the Radio/charger FS100 Stud Finder The Drill Circular Saw, the Cut Saw Light and Vacuum. But other than that the kits are very similar. I bought four extra batteries and the fast multi-volt charger on E-Bay so in case I ever do get busy with the kit I'll be able to keep it powered. I would say you would have a hard time beating this kit for the performance and price (check E-Bay). Plus it's been fun to play with, and I've read DeWalt builds the Firestorm stuff. I am looking forward to putting it to a real test. But I'm sure it will pass any tests I put it through with flying colors.

The tools make the man!
Someone once told me a man is only as good as his tool. Well, when I purchased the Black and Decker 7-tool combo kit I became a man and for a year I was king of the neighborhood. I had become the most respected carpenter in the project. I built four house that year and was going strong as I was branching out my business. Until one night I awoke to find some of my tools missing. I figured I must have left them on a job or something. The next day I searched for them but to no avail. The next night I woke and found the rest of the kit gone. The next night I burned the candle at both ends waiting to find the culprit. I had fallen asleep and felt something tugging at my underwear. I awoke and jump out of my seat when I found little gnomes racing through the house holding my underwear in victory. I pulled my best 007 and tracked them down in the crevices of the basement. There they were singing "We are the tool and underwear gnomes. We need lots of supplies to make it on our way. Big business is a freight train on a path to money right away."
I stood there alone and cold as a breeze went up my pajamas, begging for my atleast my hammer in trade for my silence. They simply told me it was my word, a middle aged working class man, against that of a GNOMES. I guess it was back to the drawling board, without a pen.

Great Product
The product works great and is easy to assemble. The hardest part is finding out how to put all the tools into the bag. On the first day, I used the circular saw, drill, vacuum, and light. All worked as well as my corded tools. I am a convert to cordless. One nice touch is the power distribution plugs in the front of the bag. My only confusion is why? With cordless tools, do you need more outlets? If they want to improve the product, add another battery and the Radio Battery charger. ... Read more

Features

• Powerful 2-amp rotary tool completes jobs faster and won't bog down
• Exclusive "Flip-Lock" spindle lock system allows fast and easy accessory changes
• No need to hold down an awkward button
• Rubber over-molded grips
• Universal collet system accepts all standard rotary tool accessories

Amazon.com Review

Perfect for travel in the U.S. or abroad, this garment steamerheats up quickly to remove wrinkles from clothes without the need forironing. It works with or without the removable fabric brush and usestap water to steam away signs that garments have been packed. Thatmeans a fresh appearance for a business meeting, a meal, or an eveningstroll. Since neatness counts equally on Broadway or the ChampsElysées, the steamer operates worldwide on dual voltage (120 or240 volts). A flick of a switch selects the voltage, and an adapterplug is included for electric sockets outside the U.S. For compactness,the lightweight appliance has a retractable handle. With the handleretracted, it measures just 6-1/2 inches long and 3 inches wide. A softstorage pouch accompanies the steamer. --Fred Brack ... Read more

Features

• Soft storage pouch included
• Removes wrinkles without ironing
• Removable fabric brush
• Dual voltage for overseas travel, with adapter plug
• Compact: 6-1/2 inches long, 3 inches wide with handle retracted

Features

• Includes a 9 volt alkaline battery
• Take guesswork out of finding studs up to 3/4" deep
• Senses studs by detecting differences in wall density
• Lightweight and comfortable to hold
• Audible and visual display

Reviews (1)

Great addition to toolbox
We recently moved from an older home where the walls were so solid you could hang pictures anywhere. our new place is new though and as seems to be the usual case uses a very thin kind of plaster board. After unsuccessfully trying to hang some pictures and having them fall down I got this and hey presto, everything is now up and most importantly staying up. The manual wasn't very good and it took me a few goes to get the hang of it, but I'd recommend it to anyone who has pictures, and, or heavy mirrors to hang. ... Read more

Amazon.com Review

Changing filters regularly improves vacuum performance, so it makes good sense to keep extras on hand. This box contains two pleated HVF20 replacement filters, each measuring 3 by 4 by 1-1/8 inches. The HVF20 fits all Black & Decker corded hand vacuums in the HV series, including HV-7000, HV-7010, and HV-8000. --Ann Bieri ... Read more

Features

• Measures 3 by 4 by 1-1/8 inches
• Set of 2 pleated Black & Decker HVF20 replacement filters
• Fits all HV series corded hand vacuums
• Changing filters regularly improves vacuum performance
• Filter is easily inserted and removed for disposal

Features

• EW421 - Drives out: Mice, Cockroaches, Spiders and other pests
• For use around dogs, cats, birds, fish
• Generates powerful ultrasonic signals that repels pests for your home or office
• No Poisons, no chemicals, no traps
• Extra Outlet, built in nightlight