Product Description

mfg by: STANLEY BOSTITCH FASTENING SYSTEMS COIL ROOFING NAILER Contact trip Fastening range: 3/4" - 1-3/4" Replaceable anti-slip rubber frame protector Easy one-piece, one-step loading Increased fastener range Comfort grip handle, shingle placement guide Long life carbide steel contact parts Use on new or re-roof applicationsRN46-1 COIL ROOFING NAILER ... Read more

Product Description

COLLATED STICK FRAMING NAILS 28 deg. wire collated nails Use with N80SC-N79WW-N86S-N88WW-N100C nailers Diamond point design Available in several sizes and coatings S10DRGAL 3 GALV RING NAIL 3"x.120 TACKS, BRADS, NAILS, SCREWS, BOLTS STANLEY BOSTITCH FASTENING SYSTEMS ... Read more

Product Description

Single edge blades made from high carbon steel for razor blade scrapers. ... Read more

Features

• Single edge blades made from high carbon steel for razor blade scrapers.

Product Description

Power Crown Slammer Stapler, Use For Tacking, Insulation, Roofing Felt & Stapling Down Plastic Sheeting, Uses Bostitch #STCR5019 Staples, 1/4" Or 3/8", Includes Stapler, Leather Sheath, & Staples. ... Read more

Features

• Power Crown Slammer Stapler
• Use For Tacking, Insulation, Roofing Felt & Stapling Down Plastic Sheeting
• Uses Bostitch #STCR5019 Staples, 1/4" Or 3/8"
• Includes Stapler, Leather Sheath, & Staples
• Made In The USA

Product Description

Tape rule with thumb latch tape lock. 1" wide tape has large measurements. ... Read more

Features

• Tape rule with thumb latch tape lock.
• 1" wide tape has large measurements.

Product Description

Tape rule with thumb latch tape lock. 1" wide tape has large measurements. ... Read more

Features

• Tape rule with thumb latch tape lock.
• 1" wide tape has large measurements.

Product Description

mfg by: STANLEY BOSTITCH FASTENING SYSTEMS STAPLES Heavy duty Power Crown staples Use in PC1000-PC2000-PC4000-PC5000 H30-8-P6C-8 Models Order by the pack of 1000 staples 5 packs of 1000 per box STCR5019 1/2 BOST STAPLES 5-1M 1/2" ... Read more

Product Description

mfg by: STANLEY BOSTITCH FASTENING SYSTEMS GALVANIZED COATED STAPLES Chisel point For use with S32SX, T31-3SX5035 & T28-5 T40SX-CT, SX150K-1 and SB150SX 7/32" x 18-ga. narrow Crown SX503511/4G 1-1/4 GALV STAPLE 1-1/4" 3M ... Read more

Product Description

GALVANIZED COATED STAPLES Chisel point For use with S32SX, T31-3SX5035 & T28-5 T40SX-CT, SX150K-1 and SB150SX 7/32" x 18-ga. narrow Crown SX503511/8G 1-1/8 GALV STAPLE 1-1/8" 3M ... Read more

Product Description

Features durable construction and quick, smooth take-up mechanism. Size: 5-7/8"Wx6-7/8"Dx3/4"H. ... Read more

Features

• Features durable construction and quick, smooth take-up mechanism.
• Size: 5-7/8"Wx6-7/8"Dx3/4"H.

Product Description

Blade Dispenser
Wall dispenser includes 100 blades for Quick Change Utility Knife (BOS10499) and Plastic Utility Knife (BOS10065), both sold separately. ... Read more

Features

• Adjustable Power switch for different wood species densities
• Drives 3/8" - 1 3/16" pins
• Durable construction featuring over molded grip
• Requires no adjustment for different pin lengths
• Rear Exhaust

Features

• Bostitch 1000 ct. Caps for Bostitch SB150SLBC-1 Cap Stapler

Product Description

1-1/2in. Flooring cleats for the MIIIFN industrial flooring cleat nailer. 1,000/box. Enough for 200 square feet of flooring. Fits Competitor Tools Porter-Cable:FCN200, Powernail: 345, 45, Primatech: P210, H300, H330, Q500, Senco: SHF50, SHF15, SHF10 ... Read more

Features

• 1,000/box
• L-shaped flooring cleats
• Nails 200 square feet of flooring per box
• Fits Bostitch Tools MIIIFN
• Coated Finish

Amazon.com Review

A popular model with framers, this Bostich stick framing nailer offers solid, no-fuss, reliable performance. With an aluminum housing and extruded aluminum magazine, it's a tough piece of equipment, designed to hold up to falls and the inevitable beating things take on a job site. Features include aggressive teeth that easily grip lumber (for toe-nailing), adjustable depth control, and a deflector that conveniently directs exhaust away from the user. We were impressed with how solid the whole unit feels--it definitely has the burliness of an industrial-strength tool. But with its burly nature comes a bit of extra weight--always something to consider.The tool weighs just over 8 pounds empty, so some arm fatigue is probably inevitable. But the nailer's rubber grips are comfortable to hold, and the balance is good. This model shoots 2- to 3-1/2-inch, 21-degree, plastic-collated, full-head nails, and will hold up to 75 nails at a time. This model is also available in contact or sequential trip. --Jonathon Tudor ... Read more

Features

• Multidirectional exhaust and a comfort grip
• Designed for fast loading of two nail clips with no adjustments
• Angled magazine for accurate toe nailing
• Lightweight -- only 9.1 pounds
• Used for framing sheathing, roof decking, and subflooring

Reviews (6)

A tank!
This thing is a tank. I bought one used years ago. It now has all of the paint worn off , and does not owe me a penny. It has never mis-fired, mis-fed jammed or leaked air. Just done it's job without missing a beat. It has had every brand of full head nails, and will feed them all. It even fed half a clip of d-heads once in a moment of desperation. Go figure. They are heavier ( by a lot!) than some of the newer guns and simpler. They do not have a 'lock out' for the last nail and will dry fire. Do not have the jam clear nose. But I can give one to a helper, and know there will be a greater chance ( some find a way) he will be able to do the job without shooting himself, someone else ( mine is sequential fire only, no bump fire and will not double shoot) or killing it ( two story drop, throw in dirt etc). And after he has finished abusing it, the next time I pick it up, it will still work!

Good Nailer for Cost
This is my first nailer although I have used Paslode, DuoFast and Senco as well. I understood going in the 800 lb force would not produce the same results as the higher priced models. I have found the nailer to work in all materials (although I have only used it for a couple of hundred nails), hardwood, softwood and even pressure treated. No jams as of yet and the nailer does drive nails completely into wood as long as you have it seated properly on the piece you are nailing. I must also add that I have the adjustment set for the deepest setting. I have used 8, 10, and 12 penny nails so far. No problem finding nails at Home Depot.

Stanley Bostitch N95RHN Nailer
The N95 nailer is a great framing nail gun if you can find a local nail supplier. It consistantly operates in pine and other woods. However, I found that nails have to be specially ordered, even in Atlanta. That makes this nailer practically worthless for a do it yourself person like me.

Consider a different gun
This is my first framing nailer. I'm not too impressed. It does not drive nails to a consistent depth, especially in pressure treated wood. I am forever setting the nails with a hammer or driving the nail 1/2 an inch deep. Try as I might to adjust it I can not get that dimpled depth I'm looking for. I've put about 2000 nails through it as of this writing and have not had a jam, that is the only reason I give it 3 stars.

Bostich N95RHN Framing Nailer
I am the husband of the Amazon account user. I bought this tool prior to building a two-story workshop/office/garage this past summer. The tool worked flawlessly. I was amazed at the angles which you could approach the work at considering the tools substantial size. In many cases, it can reach place almost impossible to a traditional hammer. I consistently added 2-3 drops of air-tool oil to the nailer and never had a jam! The tool was easy to load and it would easily sink 16 penny (3.5") nails in all framing materials. This tool is awesome for toe nailing. It is a little heavy after use above your head, but generally the work that this tool does is far less tiring than hand nailing. The best thing is that the nailer allows one hand to be free at all times. This tool is a must for installing plywood. I completed my 26 x 32' building in a little more than 2 months with little help from others. This tool saved me much time and much labor. The quality is superb. Don't forget that it uses full round head nails!! ... Read more

Features

• Makes fastening of wood furring strips to concrete fast and easy
• Aluminum housing for job site durability
• High-speed pneumatic power increases productivity over other fastening methods
• One-hand operation for ease of use
• High capacity magazine reduces reload time

Features

• Large gauges provide a clear view of both tank and regulated air pressure
• Powerful ultra-efficient induction motor that draws only 10 amps for easy start up and long life
• High performance oil-free pump for reduced maintenance and high air delivery
• Rugged roll cage protection for extreme job site durability
• Innovative integrated control panel for the ultimate in user convenience

Features

• Large gauges provide a clear view of both tank and regulated air pressure
• Powerful high performance induction motor that draws only 12 amps for easy start-up and long life
• Patented ultra-low friction pump for easy start-up in cold weather and high air delivery
• Rugged roll cage protection for extreme job site durability
• Innovative integrated control panel for the ultimate in user convenience

Features

• Large gauges provide a clear view of both tank and regulated air pressure
• 1.5 HP motor for fast pump up and recovery times
• Oil lubricated pump with cast iron cylinder for extreme durability
• Full roll cage protection for extreme job site durability
• Innovative, integrated control panel for the ultimate in user convenience

Reviews (1)

misprint
the discription discribes a 1.5hp electric compressor but the picture shows a 5.5hp gas ... Read more