Features

• Universal dust hood
• 4" OD, 6 1/4" length, 6 1/4" width

Reviews (1)

Flexible Connector!!
Although the universal flange is not flexible, it has a wide variety of potential uses. With a 4" hose opening, it can be used as a small sweeper type attachment, mounted directed on a machine, or into a "cabinet" attachment.

I built a small 6x6 box, mounted this flange on one end, left the other end open, and leave the box on the end of the workbench. When down for the day, just swept the dust/debris to the end of the bench for cleanup into the DC system. The same type of application could be used on a lathe, drill press, or for anyother type of equipment which does not have a pre-assigned dust port. This allows you to create your own dust port.

A nice simple attachment for any DC system. ... Read more

Features

• Allows quick hook-ups
• Perfect for mobile dust collectors
• Spiral end style

Features

• 4-inch diameter
• 5-pack

Reviews (3)

What's the application?
The steel band clamp should only be used in one type of application. That being where you are putting two SMOOTH surfaces together, like a garden hose or radiator hose. But with a DC application of a ribbed hose, DO NOT use the steel band clamp, use the wire clamp.

The steel band clamp will only strip and never be fully seated trying to secure the wire rib. The steel banding is not designed to do that task. Whereas, the wire clamp will actually strattle the rib on both sides and create a perfect clamping fit.

I tried to save the twenty cents over the wire clamp, and wound up stripping the clamp thread on about 50% of the applications with the steel band clamps. I antied up and spent the extra cash and got the right product, the wire clamps for the ribbed DC hose.

Don't use them
Don't waste your time with these. I returned 60 of these clamps after using 12 and found them to strip the thread very easily. Buy the wire clamps.

slippin and a' slidding
I used both types of band clamps- steel band clamps and wire band clamps- with the ribbed hose in my dust collection system.The steel band clamps slipped more, were harder to control going on and didn't seat as well as the the wire band clamps ... Read more

Features

• Grounding kit
• 50 feet of wire
• Provides everything you need to ground a dust collection system

Reviews (1)

Not terribly great
What's the point. I can get spare wire and wire nuts to ground my system far cheaper than this. i find the braided copper hard to deal with and am far happier using spare romex I have lying around the shop. Do yourself a favor and make one of these yourself. ... Read more

Product Description

Corrugated-topped steel screws turn easily under load. Semi-steel base is set to sit firmly in place without slipping. Easy to carry built-in handle. Acme type threads. Turning bars not included, but are available as an accessory. Rated capacities of 5, 10, 15, 20 and 25 tons (as listed in model number). ... Read more

Features

• Screw Size: 1 x 6.
• Height Closed: 9-1/2.
• Height Extended: 13.
• Bar Hole Size: 9/16.
• Approximate Weight: 251 lbs.. For Model Number: 1900. External Static Pressure (WG): 10.2. Bag Area (square feet): 10.68.

Product Description

ALC Model F-30 Portable Siphon Blaster. Uses abrasives or liquids. Hose length of 10'. Model F-50-7 gun with 1/4" ID nozzle and 1/8" ID air jet. Lightweight and portable. Minimum air volume 7 CFM @ 80 PSI. Made in the USA. Availability: Drop ship from factory. Usually ships within 5-7 days. Ships via UPS. ... Read more

Features

• Reducer
• 4" to 3

Reviews (1)

Reduce Hose Size, Increase Air Suction
If you need to step down in the DC system, which is recommended, this works great. The ends are to size stated, the hose fit easily and the wire clamps put it all together snuggly. The fitting allows you to step down from a larger main line to smaller branch lines near the machine, thus increasing the air suction, where it's needed most, by the machine ... Read more

Features

• Fits 708620G

Features

• 20-inch knives
• Set of 4
• High speed steel

Features

• Tubular steel handles
• Replaceable jaws
• Clipper type jaw
• One year warranty

Features

• Jointer dust hood
• 4" OD, 8-7/16" length, and 10-1/4" width

Features

• Jet Dust Collector Bags Now Have An Elastic Band For Easy Installation
• 30 Micron Filter Bag

Features

• Lifetime warranty
• Drop-forged alloy steel, heat-treated and hardened
• Raised landing, chrome-plated and polished
• Special design on box end drives the side of the hex cut, not the corner
• 3/8, 7/16, 1/2, 9/16, 5/8, 11/16,3/4, 13/16, 7/8, 15/16, and 1"

Reviews (2)

Replace the Plastic Knobs that Lock the Wheels
P.S. The wimpy little plastic star knobs that one turns to lock down the front wheels are difficult to grasp and twist with sufficient torque unless you have extremely small hands and very strong wrists. I replaced the knobs (5/16"-18 threads) with two simple ratchet handles that are commonly used on jigs and fixtures. You can buy them about anywhere. I got mine from TWC (part # 00689) for a few bucks each, and they are a significant improvement. Not a huge deal unless you work in a small space and have to move your equipment frequently, as do I.

OVERPRICED
Sturdy steel frame, but puny little wheels with wimpy friction locks and cheap black plastic star wheel screw-downs to lock the two front wheels. Should cost half as much. Private-labeled by HTC for Jet, and Jet must make a huge mark-up on this item. They could spend an extra few dollars and at least offer industrial-strength value for the price. ... Read more

Product Description

Ball bearing and needle bearing construction for more efficient performance. Muffled handle exhaust for quiet operation. Quick action reversing valve and quick change hex collet. Adjustable clutch. 1/4" Capacity. 1/4 (NPT) air inlet thread. 3/8" Inside diameter air hose size. 90 PSI air pressure. 4 CFM air consumption. ... Read more

Features

• Overall Length: 11".
• Style: Straight.
• Overall Length (inch): 11.
• Net Weight: 2-2/3.
• Free Speed RPM: 800. Torque (inch/pounds): 20 - 145.

Features

• 52 inches long
• Replaceable jaws
• Needle bearings
• One year warranty

Features

• Jointer dust hood
• 4" OD, 8-1/4" length, 8-1/4" width