Features

• Steel band hose clamp
• 5-pack

Reviews (3)

Excellent Hose clamp
If you're in the market for a good quality hose clamp at a good price, look no further. I have used this clamp for almost a year now and it has performed above and beyond my wildest expectations. When I'm not clamping large hoses with this clamp, I use it as a paperweight to hold my important papers on a picnic table on a windy day. The only problem is that I keep on misplacing my screwdriver, making it hard to me to loosen the clamp to put it on a different hose. I like to change hose clamps every 3 months or 45 miles, whichever comes first, on my wooden-horse car. And no, not as big as the one in the mythology books, but just big enough to get me to work and back (clamp salesman with Clamps-R-Us).

perfect accessory
I found this hose clamp to be the perfect accessory to get my ... order over the magic ...free shipping barrier. It is likely I will find a use for it over time so it is a valuable addition to my emergency repair kit I keep in the garage.

Not the Preferred Choice
The manufacture's review should state: "designed to fit SMOOTH piping to...." not just "designed to fit piping to ...". Very tough application when to comes to seating a ribbed hose and the compression needed to secure that surface to a fitting.

The steel band clamp should only be used in one type of application. That being where you are putting two SMOOTH surfaces together, like a garden hose or radiator hose. But with a DC application of a ribbed hose, the steel band clamp is NOT the preferred choice, use the wire clamp.
The steel band clamp will only strip and never be fully seated trying to compress and secure the wire rib to the smooth DC fitting. The steel banding and worm screw is not designed to do that task and provide the needed pressure to fully seat the ribbed hose. Whereas, the wire clamp will actually strattle the rib on both sides and create a perfect clamping fit.

I tried to save the twenty cents over the wire clamp, and wound up stripping the clamp thread on about 50% of the applications with the steel band clamps. I antied up and spent the extra cash and got the right product, the wire clamps for the ribbed DC hose. ... Read more

Features

• #1 Spot & Residue Fighter
• Leaves your dishes sparkling clean

Features

• 5" diameter for medium-sized fittings
• Solidly connects piping to dust hoods, blast gates, and fittings
• 5-pack for multiple applications
• Wire style for better performance the band
• Wires fit easily over the end of the hose

Reviews (3)

The Best Clamp
This is a nice simple piece of critical equipment. If it didn't work properly, it could cause a lot of hassle (air gaps / hoses coming off). The two wires fit easily over the end of the hose and seated snuggly on each side of the hose groove and then clamped up nice with just a phillips screwdriver. The wires strattle the ribbing on the hose, creating a nice tight fit. I put a few of these wire clamps without one problem, air leak or lose hose.

The steel band clamps did not fair as well, they stripped and did not hold as tight. Go with the wire clamps!!

These are the ones to buy
This wire clamp does not strip. The band clamps are worthless. I have used them both and returned all 60 of the bands.

Big difference
I didn't figure that there was much of a differnce between hose clamps. I used both - steel band clamps and wire band clamps- with my ribbed hose for dust collection. The wire band clamps were easier to put on, held better, seated well, and stayed on. ... Read more

Features

• Blast gate
• 3" aluminum

Features

• 15-3/4"x23-3/4" table area
• Two T-Tracks

Product Description

Seasoned hardwood is completely sealed with countersunk bolt holes for a smooth surface. Heavy-duty 4" non-marking ball-bearing swivel casters. ... Read more

Features

• Length (inch): 30.
• Width (inch): 18.
• Bed Style: Carpet End.

Product Description

Seasoned hardwood is completely sealed with countersunk bolt holes for a smooth surface. Heavy-duty 4" non-marking ball-bearing swivel casters. ... Read more

Features

• Length (inch): 30.
• Width (inch): 18.
• Bed Style: Solid.

Product Description

Rear exhaust directs air away from work. Equipped with exhaust silencer, approx. 80 dB. Built-in regulator for positive speed control. UPT-11000M has dead handle for better control. 360 Head rotation provides versatility. Belt tracking adjustment. Includes 120 grit sanding belt. 1/4" (NPT) air inlet - 3/8" (ID) air hose size. 90 PSI. ... Read more

Features

• Overall Length: 18-1/2".
• Overall Length (inch): 18-1/2.
• Free Speed RPM: 16,000.
• Horse Power: 0.45.
• Belt Size: 3/4 x 20-1/2.

Features

• Steel band hose clamp
• 5-pack

Reviews (2)

Not the Preferred Choice
The steel band clamp should only be used in one type of application. That being where you are putting two SMOOTH surfaces together, like a garden hose or radiator hose. But with a DC application of a ribbed hose, the steel band clamp is NOT the preferred choice, use the wire clamp.

The steel band clamp will only strip and never be fully seated trying to compress and secure the wire rib to the smooth DC fitting. The steel banding and worm screw is not designed to do that task and provide the needed pressure to fully seat the ribbed hose. Whereas, the wire clamp will actually strattle the rib on both sides and create a perfect clamping fit.

Slippin and a' Slidding
I used both types of band clamps- steel band clamps and wire band clamps- with the ribbed hose in my dust collection system.The steel band clamps slipped more, were harder to control going on and didn't seat as well as the the wire band clamps ... Read more

Features

• Dimensions of 12-1/4" X 12-1/4" X 2-1/2" for optimal collecting capacity
• Pulls most of the dust from the table saw down and into the DC system
• Connects to bottom of table saw for uninhibited cutting
• Fits most contractor-type table saws, both foreign and domestic
• Easily adapts to other machines for versatility

Reviews (1)

It Does the Trick
This flange for a table saw works great. Pulls most of the dust from the table saw down and into the DC system. The flange, mounted upside down, on the table saw allows for a dust connection from the bottom of the table saw. It's underneath, so it is out of the way of any sawing going on, and will collect almost all the dust generated.

The only negative was, there are no mounting holes, had to drill them myself, but it was no problem. I guess this allows it to be used for many different table saws....... ... Read more

Features

• Air consumption; 13.3 cfm at 29 psi
• 1.3 liter aluminum cup
• Achieves best possible finishing results for any application
• Extremely fine automization and a very consistant fan ensures perfect finishes with any paint

Product Description

Lifts load from 2 7/8 in. H to 7 3/4 in.H. Large 7 in. x 2 in. steer wheels provide easier handling and control. Load wheels are 2 7/8 in. x 31 1/16 in. Large, ergonomic, cushion grip handle has fingertip controls. 200° turning radius. Each fork arm is 6 1/4 in.W x 48 in.L. Overall size: 64 1/2 in.L x 27 in.W x 47 in.H with handle up. Truck Ship. ... Read more

Features

• Use on straight or curved track
• Can be installed or removed at any point along track
• Easy adjustment ? remove one cotter pin and shift spacers to fit your I-beam size
• Beam height: 5in. to 12in.
• 1 1/2 ton capacity

Product Description

Designed for flexibility! Use on straight or curved track! Can be installed or removed at any point along the track. Adjustment is easy, just remove one cotter pin and shift the spaces to fit your I-beam size. Ball bearings. ... Read more

Features

• Cap Tons: 1
• Beam Width: 3-5in.
• Beam Height: 5-12in.
• Flange Width Minimum: 3 1/4in.
• Flange Width Maximum: 5 1/2in.

Product Description

Designed for flexibility! Use on straight or curved track! Can be installed or removed at any point along the track. Adjustment is easy, just remove one cotter pin and shift the spaces to fit your I-beam size. ... Read more

Features

• Cap. Tons: 1/2
• Beam Width: 3-5in.
• Beam Height: 4-12in.
• Dimensions: 8in.L x 8 3/8in.W x 7 7/8in.H
• Minimum radius curve: 36in.

Product Description

ALC 1/8" Air Jet (Silver) for Siphon Blasters. Steel. 15 CFM @ 80 PSI. NOTE: When replacing nozzles and air jets it is important to replace with the same size. Example: Small (gold) nozzle and small (gold) air jet. When changing the size of nozzle the appropriate sized air jet must be replaced also. Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

ALC 5/32" Air Jet (Black) for Siphon Blasters. Steel. 20 CFM @ 80 PSI. NOTE: When replacing nozzles and air jets it is important to replace with the same size. Example: Small (gold) nozzle and small (gold) air jet. When changing the size of nozzle the appropriate sized air jet must be replaced also. Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

ALC 5/64" Air Jet (Gold) for Siphon Blasters. Steel. 7 CFM @ 80 PSI. NOTE: When replacing nozzles and air jets it is important to replace with the same size. Example: Small (gold) nozzle and small (gold) air jet. When changing the size of nozzle the appropriate sized air jet must be replaced also. Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

ALC Bench Top Plastic Cabinet Blaster, 30" x 20". One piece construction- no seams, no leaks! Oversize top window/door. Self-adhesive window underlay. Trigger operated gun. 30"x20" work area. Recommended for use with a shop vacuum. Made in the U.S.A. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more