Product Description

ALC Sandy Jet Model F-90 Siphon Sand Blaster, 90lb Capacity. Use dry abrasives only. Hose length - 10 Ft. Tank capacity - 90 lbs. Strong tubular steel cart. Wheels - 6". Maximum 125 PSI, minimum 7 CFM @ 80 PSI. Lightweight and portable. Easy to set up. Steel nozzles - 13/64" , 1/4" , 5/16". Made in the U.S.A. Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

ALC Sandy Jet Model F100DM Pressure Blaster.Manual pull up tank closure. Adjustable abrasive flow valve. Pressure relief valve - 125 psi. Pressure gauge. Pressure relieving ball valve. Blast hood included. Blast hose - 1/2" ID x 8ft. Tank volume - .9 CuFt. Wheels - 6" .Welded steel frame. Approximate capacity - 90 lbs. Made in the U.S.A.Comes with one 1/8" and one 3/32" ceramic nozzle and three sealing blocks.Minimum air volume 7 CFM @ 80 PSI.Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

ALC Siphon Blaster Hose, 3/8" x 10' with Molded Elbow. For use with ALC 40016 and 40018 models. Availability: In Drop ship from factory. Usually ships within 2-3 days. Ships via UPS. ... Read more

Product Description

ALC Siphon Blaster Hose, 3/8" x 7' with Molded Elbow. For use with ALC 40017 model blaster. Availability: Drop ship from factory. Usually ships within 2-3 days. Ships via UPS. ... Read more

Product Description

ALC Square Sealing Block with Bushing for Pressure Blasters, 3/pk. ALC Square Sealing Block with Bushing for Pressure Blasters, 3/pack. Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

ALC Steel Nozzles for Siphon Blasters. 13/64" nozzle (Gold): 7 CFM @ 80 PSI; 1/4" nozzle (Silver): 15 CFM @ 80 PSI; 5/16" nozzle (Black): 20 CFM @ 80PSI. Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

ALC Steel Nozzles for Siphon Blasters. 13/64" nozzle (Gold): 7 CFM @ 80 PSI; 1/4" nozzle (Silver): 15 CFM @ 80 PSI; 5/16" nozzle (Black): 20 CFM @ 80PSI. Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

This 1/4" coiled water hose is extremely flexible, lightweight and compact. Tubing is made from 100% virgin polyurethane material. The set includes a 20" watering wand with an adjustable nozzle from a fine mist to a stream, as well as a faucet-to-sink adapter. ... Read more

Product Description

This 1/4" coiled water hose is extremely flexible, lightweight and compact. Tubing is made from 100% virgin polyurethane material. The set includes a 20" watering wand with an adjustable nozzle from a fine mist to a stream, as well as a faucet-to-sink adapter. ... Read more

Features

• Titanium Coated
• Precision-machined
• Storage case included

Reviews (1)

Spend more money on better bits
These bits are very poor quality. I noticed straight out of the box that there were dings in the blades (mostly the larger ones), a bad sign to start with. I do not appreciate having to hone a new bit before using it- it should be usable right out of the box.

I researched a lot of bits before making my purchase. These bits are made in China. I had read other reviews here stating that bits made in China are lacking in quality. But then I discovered that these bits are associated with Jet, a company known for its high-quality. With this in mind, I decided to give them a try, and bought the 10-piece set from Lowes for $25 (the 7-piece set is $15).

Visually, they appeared inmpressive, with their golden titanium coating, and attractive box. After closer inspection though, I noticed that the titanium coating was bubbled up on a few bits. Truth be told, the box is much better quality than the blades!

As a test, I tried one bit of the set, the 1/2" one, on pine and oak. I set the speed of my drill press accordingly for the bit's size (a very important step, especially with larger bits).

The bit went through the pine at an adequate speed, but would not eject the chips, which consequently got stuck in the bit and had to be cleaned out manually. The bit also tore out a large chip out of the bottom of the piece when it exited. This typically won't happen on quality bits of this size- though I admit a backing board under the piece would (hopefully) have solved the problem. I attribute the tear-out to the dullness of the blades on the bit.

The bit was completely hopeless in the oak. Drilling was very slow the entire time, again attributed to the dullness of the blades. Again, the bit choked on the wood chips and clogged, in spite of raising the bit partially out of the wood from time to time in an attempt to clear the chips. Consequently, the entire hole was scarred with burn marks, and the wood became very hot.

I also own a 1-3/8" Freud steel bit and a 7/8" carbide-tipped bit from www.mlcswoodworking.com. Neither exibit these characteristics. Both work very well, and are worth the money.

My suggestion is to buy either a set of better bits, or to buy just the bits you need at the time from a quality company like Freud. You will find that they are definitely worth the money. Expect to pay $8 and up for individual quality bits.

If money is no object, I suggest investing in the Freud carbide-tipped 7-piece set. But then again, you probably didn't buy these bits if money was no object! ... Read more

Product Description

For use with Jet Screw Jacks, #SJ Series ... Read more

Product Description

For use with Jet Screw Jacks, #SJ Series ... Read more

Product Description

For use with Jet Screw Jacks, #SJ Series ... Read more

Product Description

Ideal for construction, structural moving, supporting machinery and general maintenance. Corrugated-topped steel screws turn easily under load. Semi-steel base is built to sit firmly in place without slipping. Easy to carry with built-in handle. Acme type threads. Turning bars not included, however they are available as an option. Complies with ANSI/ASME B30.1 standards. ... Read more

Features

• Ideal for construction, structural moving, supporting machinery and general maintenance
• Corrugated-topped steel screws turn easily under load
• Semi-steel base is built to sit firmly in place without slipping
• Easy to carry with built-in handle
• Acme type threads

Product Description

Ideal for construction, structural moving, supporting machinery and general maintenance. Corrugated-topped steel screws turn easily under load. Semi-steel base is built to sit firmly in place without slipping. Easy to carry with built-in handle. Acme type threads. Turning bars not included, however they are available as an option. Complies with ANSI/ASME B30.1 standards. ... Read more

Features

• Ideal for construction, structural moving, supporting machinery and general maintenance
• Corrugated-topped steel screws turn easily under load
• Semi-steel base is built to sit firmly in place without slipping
• Easy to carry with built-in handle
• Acme type threads

Product Description

Ideal for construction, structural moving, supporting machinery and general maintenance. Corrugated-topped steel screws turn easily under load. Semi-steel base is built to sit firmly in place without slipping. Easy to carry with built-in handle. Acme type threads. Turning bars not included, however they are available as an option. Complies with ANSI/ASME B30.1 standards. ... Read more

Features

• Ideal for construction, structural moving, supporting machinery and general maintenance
• Corrugated-topped steel screws turn easily under load
• Semi-steel base is built to sit firmly in place without slipping
• Easy to carry with built-in handle
• Acme type threads

Product Description

Ideal for construction, structural moving, supporting machinery and general maintenance. Corrugated-topped steel screws turn easily under load. Semi-steel base is built to sit firmly in place without slipping. Easy to carry with built-in handle. Acme type threads. Turning bars not included, however they are available as an option. Complies with ANSI/ASME B30.1 standards. ... Read more

Features

• Ideal for construction, structural moving, supporting machinery and general maintenance
• Corrugated-topped steel screws turn easily under load
• Semi-steel base is built to sit firmly in place without slipping
• Easy to carry with built-in handle
• Acme type threads

Features

• Drop forged
• Alloy steel
• Chrome plated
• Lifetime warranty

Reviews (1)

Who is jet tools?
Even though I havent heard of these tools before they are descent and pack a lifetime warranty! ... Read more

Product Description

Jaws are made of high carbon alloy steel, handles are tubular steel with rubber grips and are angled at the grip for maximum leverage. Rockwell "C" Scale 40. Black color. ... Read more