Features

• Repacement metal cutting blade
• Compatible with SC500 Navigator hand saw/jig saw

Features

• Fits all popular finishing/detail sanders
• 5 pieces of 120 grit (medium)

Amazon.com Review

A good starter model, the 1200-watt Black & Decker Quickpress spray iron has all-in-one controls and easy wet-dry versatility. Though not as powerful or as impervious as higher-end models, the iron offers helpful features for basic ironing. The controls are on the handle and automatically generate steam based on heat setting, so you only have to make one setting selection. A spray button also lets you spritz clothes as you iron creases or stubborn wrinkles. The water reservoir fills through a wide-mouth open hatch, and a view-window lets you track the tank level. The iron has an aluminum soleplate, making it very lightweight, and a button groove that allows you to iron right up under buttons. Black & Decker also built in the Auto Clean Steam Valve to prevent build-up of mineral deposit and lint. One thing to note: the power cord on this iron does contain lead. Measuring 10-1/2 by 4-1/4 by 5-1/2 inches, the Quickpress comes with a one-year warranty.--Emily Bedard ... Read more

Features

• 10-1/2 by 4-1/4 by 5-1/2 inches
• 1200-watt steam/spray iron for wet or dry ironing
• Automatic steam generation based on heat setting
• All-in-one top-mounted controls; ergonomic handle
• Aluminum soleplate; water view window; pivoting power cord

Features

• Includes 17 Titanium drill bits up to 1/2"
• Includes Storage case

Features

• High quality materials for added life and durability
• White fine non-woven abrasive pads for mild scrubbing on delicate surfaces
• Medium coarse non-woven abrasive pads for cleaning hard metals and removing rust

Reviews (1)

Water and B&D Scrubbers don't mix
How does one scrub without water? Darned hard, I say. I use the mouse to scrub a working sink, and while it works well and gets stains out, the rubber plate to which the scrubber attaches continuously comes off the tool when wet. The store graciously replaced the entire unit, but it happened again the next time I scrubbed. A little super-glue was all it took for the pad to stay on. Now...why can't they do that at the manufacturer? Otherwise, a powerful little scrubber, if you're willing to put up with peeling corners and such. ... Read more

Product Description

Black & Decker AS150 Variable steam settings, plus surge and mist Vertical surge provides upright steaming Nonstick soleplate Automatic shutoff 360-degree pivot cord ... Read more

Features

• Fits all popular finishing/detail sanders
• 5 pieces of 220 grit (fine)

Amazon.com Review

Cordless convenience is what you'll find with the three-in-one Black & Decker MT1203K-2 12-volt multitool kit. Powered by a rechargeable 12-volt battery pack, the multitool offers three tools--a drill/driver, jig saw, and sander/polisher--in one powerful unit. To change applications, simply switch out one attachment for the next. It's that easy. With the multitool, you don't have to compromise performance for convenience--the tool delivers both, no matter which attachment you use. The drill/driver, for example, offers variable speeds of 0 to 700 rpm, a keyless chuck, an electric brake, and 24 preset torque positions. The jig saw operates at 0 to 3,000 spm and features, among other things, tool-free blade changing, a blade support roller, and a 45-degree bevel for just the right cut. The sander/polisher spins at 0 to 8,000 opm and is compatible with all the attachments and accessories that go with Black & Decker's popular Mouse sander. The whole thing comes housed in an impact-resistant, molded-plastic storage case that can go anywhere with you. --Carl Thress ... Read more

Features

• Sander accepts all Mouse attachments and accessories
• Drill/driver, jig saw and sander/polisher all operate off the same power unit
• Rubber-grip handle with steel plate texture for comfort and control
• Drill/driver features keyless chuck and 24-position clutch
• Jig saw bevels 45 degrees for added versatility

Reviews (17)

Black&Decker Home use 12-volt Multi Tool
Was not used to the slow rate of charge nor how quick the battery depletes when used with the drill. (this is good for battery life though)

Sander is nice to have, saw is o.k.

Overall it is a nice home use unit that gives you some nice choices when it comes to tools. Am happy with the out put of the unit for home use.

Looking for it in 14 volt.........

Four years of good light to medium duty jobs
I've owned the Multi-tool for four years, and recently had to replace one of the original batteries. A single battery will last most of the day drilling dry wall srews or wood screws. The Saw will cut 1/2 inche ply-wood and the batteries lasted about an hour each doing so. Recently we've added a room to the back of the house 19'X10' and again the driver did a fine job. Now we are gutting out a closet a bathroom and laundry area and combing them into one large bathroom and again one fully charged battery will last most of the day driving screws. I can't say much about the sander, but the noise level is not an issue. The B&D 12volt Multi-Tool is no louder than any other 12 or 14.4 cordless drill.

Show But No Go
This multi-tool set is really pretty, but it is all show and no go. The tools are so heavy and clunky that they are difficult to use. The jig saw has an extra button on the power head that makes it very difficult to use. You actually have to push a button with both hands to get it to work. All of the tools are very noisy and require ear protection to use. The batteries have a very short life and a very long charging time. If you accidentally leave them on the charger it will distroy them. I bought this set for my son for Christmas, but the little elves that built it were obviously not tool makers. I'm sending the whole mess back. No more Black and Decker for me!

Great idea but awkward to use
I received the Multi-tool B&D kit and I was encouraged by the concept when I opened this xmas gift. A sander, drill and saw all in one! But when I started to use the Multi-tool I realized this tool is not well engineered. Changing from one tool to the next is clumsy. The tool is way underpowered. In the saw mode, the Multitool bogged down when cutting thin wood! Also this tool is much too loud suggesting poor gear design. I did find the sander handy for corner sanding. Also the drill is good for low torque screwdriving. The final issue I had is how hot this tool gets even in light duty jobs.

My wife will be returning this tool. I prefer dedicated tools that deliver in one application.

great starter set
On the whole I have been pleased with the kit. I am not someone who needs to use this tool every weekend, but I have found it to be reliable and convenient. The battery packs are pretty good though I wouldn't start on a project without having both batteries fully charged. The saw and drill are great, but I found the sander to be the least usable of the three. It has been difficult to gauge the sensitivity of the trigger and therefore the speed of the sander, and also found that it drains the batteries quickly. Since sanding is not a 30 second job I would probably use an electric cord sander for larger projects.

Overall great tool for work around the house. ... Read more

Features

• Silverstone non-stick soleplate helps iron glide smoothly over the roughest fabrics
• Steam and Spray modes for easy control over nearly every type of fabric
• Automatic Cord Reel
• Automatic Shut-off
• 110-120V AC

Amazon.com Review

Equipped with a nonstick soleplate for a smooth glide and easycleanup of starch residue, this lightweight, full-size, 1,200-watt ironis especially useful for sewing, quilting, and craft enthusiasts whowork with fusibles and bondable interfacing. Black & Decker's SmartSteam system ensures a controlled steam flow by automatically adjustingsteam volume to whatever temperature is selected on the seven-settingdial. There's also a self-cleaning system for flushing out lint andminerals to prolong the iron's life. Other features include verticalsteam for removing wrinkles from hanging garments and drapes;misting-spray and steam-burst buttons for tough wrinkles; an 8-foot,360-degree pivoting cord to prevent tangles; a soft-touch grip; and anextra-large transparent water tank. For safety, the iron automaticallyshuts off if it's not moved for 10 minutes. It carries a one-yearwarranty against defects. --Fred Brack ... Read more

Features

• Duraglide non-stick soleplate
• 10-minute auto off
• Horizontal surge of steam
• Smart Steam system
• Comfort Grip handle and 2-way steam clean

Reviews (6)

Greatest card ever
The pinnacle of technology is here! Any video card that can iron your clothes and look cool all at the same time gets two BIG thumbs up.

The best card for Doom 3!
Thats right. This card has it all. It's cheap, owns, and great for games.
This x800 supports EVERYTHING!
Extensive Clothing Shader 3.0
Vertex burning
And even is water cooled.

Bottom line: if you are gaming and want a great card that has it all, this is the real deal. Better than that NVidia 6800 or that ATI x800 XT :P BUY THIS!!!

Kickass PCI Express
This card kicks a lot of ass. Like a lot people at the PlanetDoom forums say:
Vertex Burning
Watercooled
AND has extensive clothing shader 3.0 Support
Doesn't require a huge power supply.
And it conviently fits well in my closet!

Bottom Line: This card KICKASS! Specially with Doom 3 -wink-
USCM-Cid

OMG so l337
Excellent overclocking abilities for a clothing iron. Doesn't quite fit comfortably onto my motherboard but it sure gets those wrinkles out!

Too BAD , Never buy
Never buy this Item from AMAZON .... So far replaced it twice and they still sending me the used one ... no wonder their price is lower because they are all used .... ... Read more

Features

• Factory wound string trimmer replacement spool
• Fits Black & Decker String Trimmers ST100, 82209, 82210-type 2 and type 3
• Factory wound for maximum reliability
• 30 day no-risk satisfaction guarantee and full two-year warranty

Features

• Stainless steel sole plate/soft grip
• 1500 watts
• Auto off/auto clean
• Vertical steam/surge steam
• Spray mist/pivot cord

Features

• Fits all popular finishing/detail sanders
• 5 pieces of assorted grit (1 coarse, 2 medium, and 2 fine)

Reviews (2)

Great small tool for small jobs!
I had been looking at drills for a while in order to do those small jobs around the house, such as hanging pictures and shelves. I didn't feel it was necessary to get a large drill with many attachments for these types of jobs. When I came across this drill/driver I was absolutely thrilled! This tool is very easy to use and small enough that it doesn't take up too much storage space when not in use. Additionally, the cost of the tool is very affordable. I highly recommend this product!

Great for light to medium applications.
The driver feels very solid and nice in your hand. It comes with 4 hex-shank bits - a medium philips, medium flathead, 3/16 and 1/16 drill bits, which should be fine for most jobs. While there is plenty of torque for drilling, there is no torque range adjustment, so you'll have to be careful not to overtighten screws. For that purpose, it has an intuitive manual spindle lock that clicks firmly into place, allowing you to use it like a regular screwdriver.

The bit holder shaft has a convenient quick connect sleeve. You simply pull back on the sleeve insert or remove the bit. The bits have a groove at the end to keep them in the shaft when you work, solving the common problem that I always run into previous power screwdrivers and drills, where for various reasons, the bit gets stuck in the hole or screw when I pull away.

The handle has cartridge style battery pack. Also included with the drill/driver are 4 AA batteries, 20 screws, and 20 plastic inserts (for dryway)-- everything you need to get started. It comes with a full 2-year home use warranty.

I really like this unit. It was very inexpensive, does the job, has the fit and finish quality that one expects from Black and Decker, and has an ergonomic look and feel.

While it would have been nice for this drill/driver to run a bit faster (it runs at only 130 rpm versus the more desirable 180/rpm) and have a torque adjustment ring for worry free screw driving, I think the price makes up for it considerably.

Overall, the AD600 is an excellent value. ... Read more

Features

• Repacement blade for the SC500 Navigator
• Curved cutting blade (jig)

Product Description

Black & Decker's Prestige iron has features you'll find in irons that cost much more, including a Duraglide nonstick soleplate, extra-large water tank, and powerful, vertical and horizontal steam that's regulated to the temperature setting. SmartBargains Style #3010266115 ... Read more

Features

• Duraglide nonstick soleplate. 10-minute auto off.
• Flip-open water fill door. Spray.
• Powerful vertical and horizontal surge steam. Extra-large water tank.
• 360-degree pivoting cord. Comfort-grip handle.
• Bonus fill cup inside. Smart Steam™ system automatically adjusts to the right amount of steam at any temperature.

Features

• Bi-metal hole saws for extended use
• One handed Rack & Pinion System enables the user to quickly and easily secure the guide to the door
• Works with any door width between 1-3/8-inch and 2-3/8-inch
• Works with both standard backsets allowing for variability in door designs
• Works with any latch bore face plate style allowing for rectangular or round face plate

Features

• Hole saws made from high carbon steel for moderate use
• One handed Rack & Pinion System enables the user to quickly and easily secure the guide to the door
• Works with any door width between 1-3/8-inch and 2-3/8-inch
• Works with both standard backsets allowing for variability in door designs
• Works with any latch bore face plate style allowing for rectangular or round face plate