Features

• 30 day no-risk satisfaction guarantee and full two-year warranty
• Lawn edger and landscape trencher replacement blade
• Fits Black & Decker Edge Hog edger/landscape trencher model # LE750
• Factory sharpened for superior cutting performance
• 7-1/2-inch serrated edger blade

Reviews (2)

Picture is Worth a Thousand Words
I own a Black & Decker LE750 Edgehog. Mine is Green with a black handle. The blade shown in the picture is not the same one I received. The part number is the same (EB007) but the center hole cutout is not the same as depicted. I received a center round hole cut whereas the picture shows a polygonal type hole. That's the blade I really needed. Even if you eliminated the washer with the built in polygonal template you still ended up with a driveshaft with 2 sides flatten. As I mentioned the center hole in the blade is round. Still, even putting the supplied washers on both sides of the blade, the blade will eventually come loose the moment it makes contact with a stone or concrete. Now that I own 4 of them in order to get the free shipping I now have a lifetime of edger blades that I will constantly be tightening. If the picture is from an older model try updating your parts list. I should of gone to Sears.

EdgeHog Blade
Overall, not bad...You need to be carefull and not hit the concrete or blacktop too often or the life goes way down. I'm still using my first blade that I had when I bought this in February... ... Read more

Product Description

This heater provides safe, portable warmth wherever you need it. Safety features include an ALCI plug to prevent overheating and a tip-over switch that cuts power if it's knocked over. It also has a 4-hour timer and thermostat with three heat settings. SmartBargains Style #3010260458 ... Read more

Features

• Measures 10 by 15 by 8 inches; 1-year warranty
• Space heater with 8-way safety features, 4-hour timer, and thermostat
• 750- and 1500-watt power settings, plus Frost Watch and fan-only
• Cool-touch housing, motion auto-off, roll-over bars, and tip-over switch
• Also includes heat patch, safety auto shut-off with PTC, and thermal fuse

Features

• Two-year home use warranty
• Powerful high torque motor that won't bog down
• Separate variable speed dial for set-and-forget convenience
• Front on/off switch maximizes control
• Includes 55 accessories and kit box

Reviews (16)

Like a Dremel, but with POWER!
I've owned a dremel for over 5 years. We just moved, and I could not find it, apparently hidden deep within our catacombs of packed boxes. It was just the excuse I needed to upgrade. Alas, I saw the RTX tool, an apparently updated Dremel. The RTX attachments and chuck appear to be similar to a Dremel, but the RTX has enough power to be a "real tool". I'm very satisfied with this purchase. I will be giving this gift to many on my Christmas list this year. Other Dremel improvements (over my old Dremel anyway) * Better case, much larger, with a separate tool holder. The dremel sometimes required a crow bar to get the tool into the case and close it. * Better speed control * flip up chuck lock to simplify chucking/unchucking attachments BTW, I use the tool mostly for trim work as a way to finish up coped joints. On quarter round, it does the entire job.

FAR superior to Dremel - here's why:
I'd wanted a Dremel for a long time but couldn't resist when I saw a basic (the RTX-3) kit on sale for half as much, with nearly 2x the power!

PROS: A) 2 amps vs. Dremel's 1.2 gives you far better cutting power (I hardly ever need any setting but Low speed!) B) The flip-lever spindle lock is FAR easier to use than a collet-locking button - you never need a tool to change parts, and it locks out the power switch (so you can't accidentally hit the collet lock with the power on - very annoying and possibly breaking the tool). C) It's just plain better-looking than the Dremel. ;-)

CONS: B&D needs to get their act together on accessories and dealers who stock them - and/or let us know whether/which Dremel or Craftsman accessories fit the RTX! I could really use a drill press, router, or flexible extension accessory, and can't seem to find them anywhere in stores (the website isn't too helpful, here, either)

Overall, though, much more power for a much better price - Dremel's needed the competition for a long time, and B&D delivered. (I'll give 'em 5 stars when they get the accessory & distribution thing improved.)

Broke on third use, customer service doesn't appear to exist
I bought this to do some tile and wood work around the house. During the first two uses of this tool I was quite happy with what I was able to accomplish with it. However, on only my third use the chuck lock jammed. For those of you that aren't aware of what that is, it is a metal spring loaded pin that stops the chuck from rotating when changing and removing drills, bits, etc. What I discovered is that this pin, while engaging the metal of the chuck is stabilized by the plastic housing of the unit. This would seem to me to be both a major design flaw and something that could be easily and inexpensively remedied in future units. The plastic had given way and now the chuck lock has been rendered useless. I contacted the retailer of the unit who told me that I had must have "abused" the unit and they refused to accept the return. I have attempted to contact Black and Decker directly via their customer service contact form on their web site to no avail. I have never received a response to either of the two inquiries that I made. What I thought would be a nice tool for the price turned into a lemon very quickly. This is the last Black and Decker tool I'll ever buy.

It's okay
I'm by no means a person who has any familiarity with power tools, but one day I decided that it would be useful to get a rotary tool to deal with certain things around the house. Perhaps my expectations were a little high, but once I started using this tool, I realized that it had very limited potential. It works well enough for sanding, so long as the part to be sanded is in the open and unobstructed. But in terms of cutting and and de-rusting, it's not that great of a use. At one point I was making chainmail, and tried using the tool to cut the rings of, but the so-called heavy duty cut-off disks either blew apart or rapidly ground down too next to nothing. Granted, the tool did come in handy at times, and so it was not a complete waste. It does seem to have more than adequate power, and fortunately my tool has worked fine since I bought it.

The worst customer service!
I realize that nothing is perfect. For $60 I don't expect RTX to be an Industrial tool. I did however expected it to work longer than 15 minutes! After the second use, the chuck lock failed and I had to use a small screw driver to unlock the chuck. After the 5th use, the speed controller failed. It started to hiccup while working. The sixth time I went to use the tool, it seized and smoke came out of it! Total life of this unit was about 15 minutes. I bought it more than 60 days ago so the retailer will not exchange it. I have written to Black and Decker through their web site several times. I have not heard anything from them. I realize, I may have a lemon. Not having any information from the manufacturer is the worst part. I am buying a second one now. This time I am going with Dremel. Lemon or no lemon, I am very dissatisfied with the customer service at Black and Decker. ... Read more

Amazon.com

The Black & Decker CRS144B FireStorm CutSaw is designed to cut through metal pipes, PVC, deck frames, fence posts and 2x lumber. But the surprisingly powerful CutSaw works just as well in the yard pruning trees as it does in the shop cutting pipe and timber. Powered by a 14.4 volt nickel cadmium battery, the CutSaw delivers up to 3,000 spm. The result is fast, smooth and accurate cuts every time. A variable speed trigger switch allows precise control on every cut. An electric brake eliminates wind-down. And a rotating shoe fits tightly against the cutting surface, ensuring straighter cuts. Even with all of its power, the CutSaw is surprisingly easy to use. It weighs just six pounds (roughly 1/3 the weight of some comparable units) and features tool-free blade changing with the help of a spring-loaded lever. All in all a solid addition to any home enthusiast's arsenal.--Carl Thress ... Read more

Features

• Compact, lightweight design (6 lbs.) for reduced fatigue
• Quick Clamp tool-free accessory change
• Variable-speed trigger, 0-3,000 spm, with electric brake
• Pivoting shoe with open channel for maximum visibility
• Rubber overmolded boot and handle for comfort and control

Reviews (1)

The comercial really is accurate (Imagine That)
Bought one of these saws for my Mom who is 70 years old so she could do some minor pruning of trees in here garden and yard...WOW she is now a saw hog. The weight was just right and did not tire her, what she calls flabby arms. As well as superior ease in handling she was also impressed with the durability of the battery after a full charge. It was a little more than I wanted to pay but the money I will save on trips to her house and electical tape from fixing cut through extension cords will more than be payed for. She liked it so much and I was impressed with her ability to use it, I'm getting one for the wife as well. Maybe now I can hit the links on a weekend. ... Read more

Features

• Pre-hardened, rust resistant steel blades stay sharp longer
• Exclusive blade design cuts branches up to 3/4"
• Dual action blades reduce vibration and improves cutting
• 20" blade for extended reach and even cutting
• Lock-on and lock-off buttons

Reviews (7)

HS 1010 Hedge Hog
I agree with two out of three of the other reviews. The Hedge hog runs smooth, but does not cut small growth. It just smashes them, and leaves the stem hanging on the bush. This is probably due to the very short (1/8") cutting blades. I don't like to be negative, but just wanted to alert others to this problem. I bought a Black&Decker HT-2000 with the old fashioned large blades, and it works great.

I'm in love with a beautiful Hog!
I was in trouble...with all the rain we've had the vegetation was overtaking the house...in came the Hog to save the day! In just a short period of time it cut things down to size. Three days work was reduced to three hours! Cool features of this machine include the absence of a cord (so that you don't accidentally cut off the main cord), choice of auto and manual power (great when you're starting to fatigue) and the ability to cut thick, woody stems (of which I had plenty). Magically, the leaves flew off the bushes and now my yard is littered with piles of leaves which my hubbie has volunteered to clean up.
This little Hog turned hard yardwork into fun ....it's well worth the money.
I would highly recommend it to anyone.

Black & Decker Hedge Hog HS1010
This double action hedge trimmer is no better than one I bought 20 years ago. (And Quit using after half a season). The reason for the displeasure is that it does not cut the branches off cleanly, it chews or nibbles at them until some of them fall off. As with all their other models the blade moves much too fast. The double action models only add to the problem.

Last summer I used a German manufactured hedge trimmer that operated much slower. It had llolypop shaped tines that actually held the branches forcing them into the blades rather than away. This trimmer worked with ease and cut branches of all sizes on hedges and various types of bushes and ornamental trees. Unfortunately this unit was a European model that operated on 220 volts and they do not manufacture a 110 volt model for export.

Poor design--chews branches off
I am a retired quality control manager and impatient with tools that don't work. I returned this hedge trimmer after using it one half hour to cut tender new growth less than 1/8 inch diameter. As you sweep the trimmer bar across the hedge, the branches bend while the blade chews away at them. Many looked like they were torn off. It's bad for the hedge and hard work as you have to go back over and over the same place.
I gritted my teeth and bought a Little Wonder 19 inch elecric hedge trimmer that cost three times as much, but it is a joy to use--the branches fall away, cut cleanly.

Nice Little Machine
A nice little machine, but the plug keeps coming out. A 50 cent piece of plastic would fix that. Even after someone telling me about it, I forgot. When it stopped all of a sudden, the only thing I could think of was that I had tripped a fuse. I went downstairs, but none were tripped. Then I remembered about the cord. It had moved out only about a half inch, so it did not look unplugged. Probably had to re-insert it 20 times during a one hour trimming session. That is my only complaint. ... Read more

Features

• HEPA filtration eliminates 99.97% of all airborne allergens, dust mites, etc.
• Regularly replaced filters improve vacuum performance

Features

• Sands flush on three sides for improved functionality when sanding to vertical surfaces
• New ergonomic palm grip design provides optimal balance for comfort and control
• Full body soft grips maximize comfort and gripping power
• Built in dust collection for a cleaner work area
• Dust sealed switch protects internals and extends life of tool

Features

• Pre-hardened, rust resistant steel blades stay sharp longer
• 22" blade for extended reach and even cutting
• Three-sided comfort handle
• Soft rubber grips for comfort and secure handling
• Lock-on and lock-off buttons

Features

• Easy setting depth scale for accuracy and convenience
• Powerful 1-3/4 HP, 9 amp high performance motor
• Dust extraction port for a cleaner work area and improved visibility
• Large stable base for convenience and performance
• Plunge action for greater versatility and control

Reviews (2)

Don't Let The HP Fool You
I have been using this router for 2 full years now. I use it daily in a large router table for anything from routing mouldings to doing raised panel doors. Don't let the 1 3/4 hp fool you. It has all the power of the big guys. I have routed everything from soft pine to hardwoods such as oak and birch and have never had a problem with the machine bogging down. The easy finger latch makes it quite easy to change the bits. All of the bits I own are 1/4 shaft so the collet size is fine for me. If I need to move up to 1/2" shafts then I will consider a bigger router. The plunge action in the router is superb. It is smooth and the spring action is very durable. The only drawback to the router is that it doesn't have a micro-adjustment on it like most routers in it's category. This makes it especially hard to use on a router table (although the experts say you shouldn't use a plunge on a table). But this tool has proven itself time and time again and I do not regret purchasing it.

Good Quality, low price
I've only accomplished a little w/ my router. Most of it having attached it to a "value-priced" router table. I bought this router w/ a beginner 10 piece bit set and have been having fun ever since. I've made nameplates, etc.... and would recommend it to anyone who is breaking into woodworking such as myself. ... Read more

Features

• Two year home use warranty
• Two heat settings (500 degrees F/1020 degrees F)
• Lightwieght and easy to use single handed
• 10 amp motor, 1200 watts
• Quick-dries almost anything

Reviews (3)

BLACK AND DECKER HEAT GUN REVIEW
IT REALLY TAKES OFF OLD LAYERS OF PAINT EASILY, BUT I AM STRIPPING A VERY LARGE AREA AND AM UNABLE TO FIND ACCESSORIES FOR IT, SUCH AS A FAN NOZZLE.

GOOD BUY
This little guy works great but remember this tool is designed with the homeowner in mind and is not intended for heavy duty work all day long.See milwaukee for that.This tool can be used for so many things no shop should be without one. It is worth the price even if you only use it now and then. Just because this tool is inexpensive does not make it junk.This would suit any homeowner just fine.Remember right tool for the right job and black and decker has been doing this stuff for a long time.

Heat Gun (Helps) get GI Promoted
The heat gun is a fast and easy way to not only strip paint, but to polish your boots as well. It's a lot better than the old lighter method for melting the polish on the boots. ... Read more

Features

• 30 day no-risk satisfaction guarantee and full two-year warranty
• .065 factory wound string trimmer replacement spool
• Fits Black & Decker String Trimmers ST1000, ST3000, ST4000, and ST5000
• Fits Black & Decker String Trimmers ST200, ST300, and ST400
• Fits Black & Decker String Trimmers GE600, 82300, 82310, and 82312

Reviews (2)

Definitely buy spares
Yes, the downside is that you will go through these more quickly than some. I burn through about 3 to 4 per season for a moderately sized lawn.

The upside is that this somewhat slender string will not kill and maim when you (inevitably) get your (or Fido's) foot or ankle in harm's way. It will sting, of course, but not slash and draw blood as most other gages do. In addition, the spool is pretty cheap, easily replaced, and available everywhere (no small point when you suddenly run out late on a Sunday afternoon).

Buy some spares...
You'll need a few spare spools because you'll go through the line quickly. I've found that if I hit anything that isn't grass - rocks, sprinkler heads, plastic edging - the line will break and you'll have to "bump" out a few more inches. ... Read more

Amazon.com Review

With its handle folded flat, this lightweight, compact traveliron takes up less luggage space than a shoe, measuring just 8 by 2-1/2by 4-1/2-inches. Key to its travel friendliness is the transparentblue-plastic handle, which not only folds but serves as the water tank.Capable of ironing either dry or with steam, the iron providesadjustable steam for various fabrics and a misting-spray button forstubborn wrinkles. It has a nonstick soleplate that glides smoothly andcleans easily. A dual-voltage adapter permits the iron to go anywherein the world, and a cloth pouch comes along for packing. The ironcarries a one-year warranty against defects. --Fred Brack ... Read more

Features

• Multi-vented soleplate with Silver Stone non-stick coating
• Lightweight and compact for ironing on the go
• Folding handle doubles as water window and folds flat for packing
• Continuous steam at a range of temperature/fabric settings
• Includes a dual voltage adapter for overseas use and handy travel bag

Amazon.com Review

If your work requires you to drill or drive in a lot of tight or awkward places (under sinks, overhead, inside cabinets, between pipes, etc.), this Black & Decker five-position drill/driver may be the perfect tool for you. The drill features a compact design and swiveling head that rotates 90 degrees front and back of center, with 45-degree stops along the way. A straightaway, inline stop even provides added reach for tight spaces in which a standard power drill might not fit. Lightweight and nimble, this Black & Decker drill is extremely maneuverable, as well. A comfort-grip handle and three-finger trigger provide excellent control, while a 24-position clutch and variable speeds of 0 to 700 rpm allow the drill to power through wood, steel, or masonry without damaging bits or stripping screws along the way. --Carl Thress ... Read more

Features

• Spring-loaded batteries slide off the drill for easier removal
• Exclusive five-position drill head provides maximum accessibility and versatility
• Quick Connect bit change system allows hassle-free accessory changes
• Three-finger trigger switch is designed for maximum comfort and control in all five positions
• 24-position clutch offers increased versatility for a variety of screwdriving applications

Reviews (7)

Great Product- ready when you are.
I recently bought a house for the first time and did not have a cordless driver. I picked this up, thinking that it might come in hand. Little did I know that EVERY single project I encountered, would involve this little guy. I have had it for several months, now, and have only recharged it a couple of times- it holds it's charge well and run like a top. I have to be honest, I have not used the rotating head on it at all, but it is narrow enough to fit in tight places and the accessory bits are just about all you could ever need. My 12v CORDED DeWalt is going to be doing nothing but collecting dust, with this thing in my arsenal. This is one of the best $50 I have ever spent.

Great versatility and power
Black and Decker has a great product with this little gem. It is much more versatile than a drill and is light weight as well. It has far more torque than the wimpy cordless screwdrivers, even more than Dewalt's 7.2V screwdriver, with the same great quick release adapter built in. I find this much easier to use than a standard cordless drill with a standard chuck (even the keyless ones) for drilling pilot holes and then driving screws. And as for driving, how about 3.5 in deck screws into treated lumber and even 4x4's. This baby has the power.
Another great feature is the five positions you can put the head in, to give you access in close quarters with enough power to do something with it. Great for hard to reach places.
It comes with a molded plastic case and an assortment of drive bits, drill bits, and nut drivers to get you started. If you want to use standard drill bits, buy yourself a quick release drill chuck. The only draw back is the long charge time (no quick charger) and only one battery. Otherwise I would have given it a 5.

Sticks Its Neck Out
This is a handy tool, solidly built and you'll find a surprising number times you'll be glad for the swivel neck for getting into awkward places. The neck locks firmly into place, with no play. The quick change bit system makes changing bits fast and painless, and the three finger trigger is nice and comfortable to use with great control over drill speed.

Two things niggle me about it though. As someone else mentioned, it seems to have low torque even at the highest setting, so you should only get this for fairly light household and assembly chores. And the battery charge cap does not give any visual clue as to when the battery is fully charged, so you have a hard time knowing when it's full again.

Other than that, it's a great drill!

i like it.....but what happens when the battery dies
well you may have read my previous review praising this tool. It IS a good tool, but I've checked ...Amazon and so on, and I cannot find a battery for this tool.
I even checked the [manufacter] website, nothing listed. So be wary, you may only get to use this for a short time
thank you

Excellent Drill for the value
I just received this for XMas, and I am very pleased with it so far. The ergonomics are very nice, and the swivel head is excellent. It seems to have decent power (I was driving 3" screws through 2x4's with ease). Not sure about battery life yet, as I have only charged it once so far. The only 2 downsides, are the slow charge time of 3-6 hours, and the "chuck" is a 1/4" connection only - no real chuck (although it is very fast and easy to switch 1/4" bits, and it comes with a nice assortment to get you started). I think this drill may replace my 6-year old Makita as my primary drill! ... Read more

Features

• Built-in Dust Collection system for a cleaner work environment
• Jug handle allows for a multitude of hand positions for versatility and control while sanding
• Full body soft grips in three key gripping areas for maximum comfort and control
• Built-in Pad brake prevents gouging
• 5" 8-hole Hook & Loop Paper for quick and easy attachment and removal of sandpaper

Product Description

VersaPak Gold battery lasts 60% longer between charges, used in all Black and Decker or Craftsman VersaPak powered tools. ... Read more

Features

• 3.6V VersaPak Gold Battery
• 300 charge life
• Fits Black and Decker and Craftsman VersaPak powered tools from scumbusters to drills and the rest
• Charges in standard VersaPak chargers
• With NiMH Technology, charge lasts 60% longer than the standard silver VersaPak batteries

Features

• Includes Wood and Masonry Bits and screwdriving bits and More
• Includes Ratcheting Screwdriver Included

Features

• 850 inch-pounds of torque for heavy duty jobs
• Hex chuck for quick and easy bit changes
• Twice the speed and four times the power of other cordless drills for high production
• Impact mechanism prevents kickback and stripping screws for less downtime
• 35 percent shorter than conventional drills for work in tight quarters

Amazon.com Review

The Black & Decker MS700K Mega Mouse four-in-one sander/polisher is designed to make quick work of your sanding, finishing, and polishing jobs. The Mega Mouse combines the functionality of a finish sander, detail sander, random-orbit sander, and random-orbit polisher in one compact unit. A unique design and interchangeable base system allow the Mega Mouse to sand, finish, and polish large surface areas and tight spaces with precision and grace. A soft-grip handle provides maximum comfort and control, a dust-sealed switch protects the tool's internal components, and a dust collection system means a cleaner work area. The tool's 1.4 amp motor delivers 10,500 opm, for quality results in any application. Use the Mega Mouse to smooth rough, uneven surfaces; to polish hardwood floors, furniture, and other flat surfaces; and even to wash and wax the car. It really is that versatile. --Carl Thress ... Read more

Features

• Kit box and 14 assorted accessories for a variety of applications
• Base changes to meet project needs
• Large iron detail sanding base for sanding large surface areas
• Finger detail base for sanding in tight spaces
• RO base/polishing base for fast, swirl-free finishing

Reviews (7)

Get what you pay for... maybe a little less
I bought this some time ago to use as a general sander. It is too light duty and too much "try to please everyone," though. The thing makes waay to much noise, I hope MY dust collector (not ONCE have I taken dust out if it since it has never collected any) fell off, it seems that some plastic piece rattles around in that area and is magnifying the noise the sander makes. As I said, although this sander does sand, I would not recommend it even for medium jobs, such as sanding a piece of wood with rough paper (grits 50, 80, 120) before you get to the finish (220+ grit) step. It just takes too long to sand with this sander.

Also,a *big* bother for me: The sandpaper you can get for this at a superstore comes with tear-away pieces for the other B&D sanders (mouse, detail, whatever). Well I hate it because the stupid sandpaper tears in the tear away perforations (since this is the biggest sander you don't have to tear anything away to make it fit) and I strongly believe this has made the sandpaper last WAAAY less than normal. This alone is reason enough for me to say "don't buy this thing." The "produce a single sheet of sandpaper for all our models" idea makes sense to some dumb marketer at B&D, but you're stuck with the self-destroying sandpaper.

Man do I hate changing the paper because it is torn away at the tear marks and not because I have used it up!

If I were a prospective buyer I would skip this sander and buy a better quality one from the "serious" toolmakers like Porter Cable, DeWalt, Bosch or Makita for about the same money for a base model sander.

Bottom line: I own this sander and I'm about to replace it with something different.

black decker 4-1 multi sander ms700
Sander okay for small sanding project. Dust collector fell off after first use. Once supplied sandpaper with kit is used, it is impossible to locate additional paper.

black and decker mega mouse
I used one on only one piece of furniture, the allen wrench fruitless whirled around rendering the "interchange" parts all useless. The sawdust collector appears not to be connected to the unit at all. Dust all over the place except in the holder. I tried 2 of them and will return the second soon - Worthless- correct your flaws Black and Decker!

Almost 5 stars
This was a present from my family. While I am not a big fan of "do it all" tools, the Mega Mouse sander seems to do the job. For what it is designed for, it does quite well. Small to medium project sanding seems to be what this tool is designed for. If you are going to sand a floor, you should get something that is designed for it.

On the other hand, if you are working small projects, this is it. Even medium sized work, in my case a 6' X 4' deck that serves as my front porch. It needed sanding after some pressure washing, and I did not look forward to doing it by hand. Out came the Mega Mouse, and it did the job very nicely. I am satisfied with the product so far, and I reccommend it as long as you realize that you are not getting a heavy duty belt sander. Keep this in mind and you won't be disappointed.

The four star rating is due to the plastic case. Too tight, too hard to get everything back into it. But so far that's my only quibble with the thing.

Buy the regular mouse and a better sander
I wore this unit out in less than 90 days. The RO sanding base lost its hooks, the mouse base broke, the dust control unit fell off and the finger attachment wouldn't stay in place. I returned it, bought the little mouse and a better RO sander and spent the same amount of money. It was an appealing idea to get all of those tools in one, but the whole package doesn't stand up to more than light duty. ... Read more

Amazon.com Review

When small messes need immediate attention, the 2-gallon, 3.5 amp Black & Decker utility vac can get the job done fast. Lightweight, compact, and portable, the vac fits easily under a workbench, under the sink, or on a storage closet shelf. Use it for everyday spills around the house, garage, or workshop, or for heavy-duty household chores like clearing a clogged sink or changing the water in an aquarium. A 6-foot power cord lets you get at those hard-to-reach spills, while onboard extension wand storage provides easy accessibility. The vac comes with built-in blower capabilities. Just move the hose from the intake to the exhaust housing to make the conversion complete. However you use it, the utility vac is built solid throughout. The motor housing is easy to remove and locks down securely using plastic latches. A foam filter sleeve is used for wet pickup. A foam filter/paper filter bag combination makes dry cleanup a breeze. And an auto-shutoff feature prevents the overflow of liquid debris.--Carl Thress ... Read more

Features

• Includes foam filter, paper bag filter, and extension wand
• Ideal for quick cleanup of wet and dry messes
• Compact design is convenient and portable
• Quick conversion to portable blower to remove more debris
• On-board tool storage

Features

• Cordless grass shear replacement blade
• Fits Black & Decker cordless grass shear model #'s GS300 and GS500
• 3-inch hardened steel blade
• 30 day no-risk satisfaction guarantee and full two-year warranty

Reviews (2)

Bring your sharpener
Unfortunately, for such a handy product, the sharpness of the blades does not last beyond a few uses. Even filing the blades to re-sharpen them does not work. Be prepared to replace the blades often, which are not cheap. It's a shame the quality of the blades is so poor--probably the cheap metal used--because it damages the reputation of Black and Decker.

Easy to Install
While it is a shame I cannot sharpen the blade on my trimmer, the replacement is as easy to install as a lightbulb. Four screws out, replace blade, four screws in---that's it! Very simple! ... Read more