Features

• Standard use for 15.6 EY3531FQWKW
• Heavy duty C-6 tungsten carbide-tipped blade for wood

Features

• Accessory for EYC132 cordless metal-cutting saw
• Heavy-duty C-6 tungsten carbide-tipped blade for metal
• 5-3/8 inches, 30 teeth per inch

Features

• Optional use with 15.6v EY3530FQMK with EY3531FQWKW and 12v EY3503FQWKQ
• Heavy duty C-6 tungsten carbide-tipped blade for thin wood
• 48 teeth

Reviews (1)

fantastic cuts without the nicks and splinters
If you own a panasonic cordless saw then you already know that you have to use a panasonic blade because of the oversized arbor. Never the less it is a great saw blade and remains sharp for a long time. Being in the remodeling industry I use it every day for finish carpentry and it has not failed me yet. good luck and remember to "keep your fingers away from the blade". ... Read more

Features

• Cuts quick, clean, and cool
• 4 3/8" X 20mm arbor blade for use on Panasonic EY3502EQMKW or EY3502FQMKW
• This is the blade that is included with the saw kit
• Designed to cut plate to 3/16" and round stock to 5/8"
• Ideal for strut, conduit, and threaded rod

Reviews (1)

Metal Cutting Blade
Works well on thicker steel items. It is very easy to knock the carbide tips off of the teeth when you first start cutting the edge of a piece of stock. The blade will last longer if you can hold the blade guard open, turn the saw on, and lower the blade slowly onto the piece you are cutting, away from the edge. Of course, it is DANGEROUS to hold the blade guard open, so I'm NOT RECOMMENDING this procedure. If you start cutting a thin piece of steel from the edge, the blade will bounce off the edge and you'll damage the blade. Works well on 1/4" bar stock, leaves a very smooth cut and doesn't create a lot of heat. Average rating is based on high price and short life. ... Read more

Features

• 4 3/8" X 20mm arbor blade for use on Panasonic EY3502EQMKW or EY3502FQMKW
• Designed for cutting thin metal such as light sheet metal and residential steel siding
• Does not create heat when cutting, will not damage the finish of steel siding

Reviews (1)

Panasonic EY9PM11D 4-3/8" Thin Metal Cutting Blade
This blade will cut thinner metal than the standard blade, but it will NOT cut sheet metal as claimed. The blade kicks back and the teeth are easily damaged. If you want to cut sheet metal, get a Skil saw and turn the standard wood cutting blade around backwards. It does a much better job than the Panasonic, and it is a whole lot cheaper!!! If you want to cut 1/8" or thicker, this blade works ok. ... Read more

Features

• 52 tooth
• 5-3/8 inch
• Heavy duty c-6 tungsteb carbide tipped blade
• For metal cutting usage

Reviews (1)

Works great for..... PLASTIC!
I own the 15.6 saw and have the metal, wood and plastic blades. I use them all and they all work great. This will cut siding, pvc pipe, etc, fast, quick and easy. ... Read more

Features

• 50 tooth, 5-3/8"
• Metal-cutting blade
• Heavy duty tungsten carbide-tipped
• For EYC132 metal saw

Reviews (1)

I cut lots of 1/2" dia metal bar stock
I have the 15.6volt panasonic circular saw and had a job cutting down old dry cleaners clothes racks. I have sawzalls, torches, bolt cutters, etc. but using the saw and this blade was by far the fastest, easiest way I could imagine, it also works great for copper pipe and any metal. My brother does plumbing and practicly threw away his rotary pipe cutters after using the saw and this blade. ... Read more