Features

• Made in USA
• 4 compartments for organizing nuts, bolts, screws, nails and more
• Includes a drill bit sizer, pencil holder, and measuring rule
• Stacks 4-5 deep in any 5 gallon bucket
• 4 piece kit

Reviews (2)

Let's Get Organized !!
This set of four stacker system, with four compartments each, has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

Better yet, when I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

I do have to watch the amount of hardware I put in the containers. Too much weight tends to make them a little "too flexible" and difficult to handle.

A great "investment" and time saver for me.

smart idea
Each time I need to set up a new truck or trailer I put together 3 of these sets. 1 for fastners, 1 for electrical, and 1 for plumbing. They keep the truck well organized and save me the lost time of having a man run to the hardware store for a few inserts. They are one of the best ways I have of keeping supplies on hand. If I could change anything about the tray it would be to have a tray divided into 6 sections for smaller parts. ... Read more

Features

• Made in USA
• 44% more capacity than traditional Bucket Stacker
• Organize washers, wire nuts, bolts, etc
• Fits in standard 5 gallon bucket
• Includes a drill bit sizer, pencil holder, and measuring rule

Reviews (1)

Great Organization
This "Super Stacker" container is a little larger than its yellow cousin. The four compartments has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

However, I do have to watch the weight of the items in the compartments. It is very easy to overload the entire bucket when you put several of these together.

When I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

A great "investment" and time saver for me. ... Read more

Features

• Screen printed Bucket Boss logo
• Extra-sturdy handle

Reviews (7)

Get Real!
I just paid 1/3 the price for an identical bucket from Home Depot. Now, if the BB version had a molded durable and comfortable handle, it would be worth it.

How Odd
How odd that there aren't any complaints about the price! The price of this excellent bucket is 2X, Double, Twice as Much as the excellent clean, new, empty buckets available from Home Depot, Lowes' or most any home improvement store.
The ones from Home Depot are even available in orange or white. Sometimes the store even has a "fill it up and get a better price on what you fit in it" sale. I don't know if these are USA made or overseas made though. I'm not sure if that makes it worth the extra money or not.
This IS a great bucket. Shop for price though.

And then you get the bucket
I wish I would've known that when I ordered the Bucket Boss organizer that it didn't come with the bucket! I learned the hard way. Not that there's anything wrong with this bucket...just thought I'd share my frustrations!

Why didn't they embed the Bucket Grip?
Seems like a logical thing to do. Bucket Boss probably had some company make the buckets for them. Why in the world wouldn't they ask the company to change the generic handle to be a nice wide one like their Bucket Grip? Then it'd be a no brainer to get this and they can even charge a buck or two more...

Does what a bucket is supposed to do!
Really not very much to say about a bucket.... the Bucket Boss brand organizer fits perfectly over it. Clean, strong and waiting to be used! ... Read more

Features

• Made in USA
• Four compartments for organizing nuts, bolts, screws, nails and more
• Includes a drill bit sizer, pencil holder, and measuring rule
• Stacks 4 to 5 deep in any 5 gallon bucket
• High visibility yellow

Reviews (3)

It's Organization
This set of four stacker system, with four compartments each, has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

Better yet, when I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

A great "investment" and time saver for me.

Ingenious pieces of plastic
Although I am not too fond of the price that Bucket Boss is getting for these handy trays, I own about half a dozen of them. That's because they work so well!

The other reviewer pointed out the weight problem when over loaded. This is very true.

My buckets usually sit in my storage building full to the brim with assorted yet sorted fasteners. I can find what I am looking for rapidly by just lifting the stacking trays one at a time and giving a quick glance.

Very good system, just be careful
These plastic trays are very durable, and downright ingenious. The only thing is that if you get a whole bucket filled with trays, and all the trays filled with screws, nails, bolts, etc; the bucket will be incredibly heavy for the average person. If it is to stay stationary in your shop or garage, it is the perfect thing for you. If you plan on adding the other outside bucket tool organizer, and filling it with tools, with the full trays inside, and are going to work out of it, plan on one heck of a load to haul. Just consider this before you go off and make a purchase. Other than that, bucket trays will provide years of durable service, and save hours of time in some cases in looking for the perfect fastener, or craft item (yes, the whole family can use them for many purposes). ... Read more

Features

• Two removable dividers for organizing larger parts
• Clear lid for viewing contents
• Lid securely snaps closed
• Fits any standard 5-gallon bucket

Reviews (4)

Not for Manly Tool Stuff ONLY!
OK, I bought several of these Bucket Boss Bucket Seat Pros for the USUAL uses - lids with convenient hardware / small tool storage. And the seat works GREAT for it's intended purposes! My wife came up with the idea (after thoroughly washing, of course) to use the seat to put vegatables and dip in. She uses a 5 gal bucket as a picnic basket, filled with ice, soda, food and enough room for plastic plates and utensils, paper napkins in a plastic baggie, etc. We're all set!
The possibilities for the complete Bucket Boss line are endless!!!

Good organizer & seat but not built well
I found the Bucket Seat Pro to be a great idea. Great storage for small parts and tools but the seat broke at the hinge. The design creates a stress spot at the hinge that isn't strong enough to hold your weight. Too bad, it was great while it lasted (one year).

bucket boss seat-lid
Very nice for storage of any type of small parts, examples-soliderless terminals, bx/romex conn., wire nuts, wire staples, plug fuses, ect. You can also stand on the top of it to use buckett with lid as a short ladder or stepping stool; and aaa yes, as for those of you who can sit on the job, a nice seat.

It Does the Job
Okay, it's only a seat, but it's a nice seat. It fits snuggly on the bucket, creating a tight fit, but not a water-tight fit. The seat itself has a flip-up lid which reveals 6 compartments for the really small items, or just to keep a few on top, easy to get at without opening the entire bucket.

One of the uses is for camping and fishing. Makes a nice, easy to carry seat that is functional and light to carry. The compartment on top of the seat holds matches, hooks, needlenose plyers and whatever else is quickly needed.

A real nice complement to the BucketBoss System. ... Read more

Features

• Removable design works great with buckets of building materials
• The perfect accessory for use with Bucket Boss tool organizers
• High impact displays are available

Reviews (4)

Here's how to make a better handle cheaper
I bought and love the Bucket Boss, but I immediately found the need for something like this product, since it was quite painful to carry a bucket loaded with tools even a short distance. I decided to write this review when I was that with shipping the cost will be $14.98. Here is my solution:
Buy some foam pipe insulation tubing (it usually has one side at least partially slit). Cut the tubing to the length you want for your handle. Secure the tubing with ratchet ties (and trim the so that the excess tab is removed). Finally cover the tubing and ratchet ties in duct tape. Even if you have to buy all of these items it should cost you less than buying this handle. You'll also have some pipe insulation, ratchet ties, and duct tape to use on other projects. I made my handle over a year ago and with regular use it still holds up.

Wonderful concept
Five stars for marketing savvy in a country that once was the world's greatest industrial giant. The inventors of Bucket Boss really know their stuff. Who would have guessed that anyone could sell a six inch piece of common rubber hose with a slit down its length for five dollars American?

Another great Bucket Boss item!
How simple! It works wonders on cushioning the carrying handle when you have your Bucket Boss loaded! My wife even can carry a full bucket with this handy item. She thought the next time she goes to get a 5 gallon bucket of paint, she'll use the Bucket Grip to lug it to the cashier. I found the opening slot goes on the "UP" portion of the rubber grip and stay tight around the hard plastic original handle of the bucket. I'll probably just apply a piece of duct tape if it ever does start to loosen up or fall off. I like this item!

Good idea -- take it a little further
This wide rubber handle definitely makes a big difference when lugging a heavy bucket of tools. Unfortunately, the concept is not fully developed. This is just a molded rubber tube slit along the bottom so you can fit it onto the bucket handle. Since there is no provision for latching it once installed, you'll find that you often pull it off of the bucket handle. A couple of button snaps molded into the split would do the trick...give it some thought Duluth Trading ... Read more

Features

• 4 nesting stackers, bucket, and bucket seat
• Organize screws, nuts, bolts, etc.
• Bucket seat is air cushioned
• Made in USA