Features

• One-year warranty, 30-day satisfaction guarantee
• Will crosscut 210 two-by-fours on a single charge
• High quality thin kerf C6 carbide blade included
• Two 3.0 amp NiMH batteries included
• Quick 45-minute charge time

Features

• 1 Year warranty, 30 Day satisfaction guarantee
• Easily converts from straight to pistol form
• Fully charges battery in 15 minutes
• Two speed gearbox, 200 or 400 RPM
• Multi-stage clutch plus drill setting

Amazon.com Review

Impressively compact, lightweight, and comfortable to use, Panasonic's 15.6-volt drill/driver fits into tight spaces where other bulkier drills won't. What about power? This Panasonic packs up to 390 inch-pounds of torque--as much (if not more) than anyone needs in a cordless tool. The motor's electronic speed control allows full torque at any speed, so you can apply up to 390 inch-pounds of torque while still maintaining control. The tool's dual speed ranges are 65 to 450 and 200 to 1,450 rpm. The 1/2-inch chuck takes bigger bits. The 2 amp ni-cad batteries deliver solid run time and charge in just 30 minutes. The first thing you notice about this tool, however, is how compact it is (the chassis measures only 8-1/2 inches) and how comfortable it feels in your hand. The soft-pad grip provides extra cushion and the tool's balance is superb, two important features if you wield a cordless day in and day out. The tool lacks an onboard bit holder, but that's about all it lacks. This drill is a smart buy for plumbers, electricians, carpenters, and even woodworkers--in short, anyone who wants a small, compact drill that packs a lot of torque and is built to last. The package includes two 2 amp ni-cad batteries, a 30-minute universal charger, and a hard-plastic carrying case. --Jon Groebner ... Read more

Features

• Two 2.0 amp ni-cad battery packs
• Delivers 390 in./lbs. of torque
• 1/2-inch keyless chuck offers big-bit capacity
• 30 minute charge saves time
• Compact and lightweight for comfortable all-day use

Amazon.com Review

Impressively compact, lightweight, and comfortable to use, Panasonic's 15.6-volt drill/driver fits into tight spaces where other bulkier drills won't. The 3-1/2 amp NiMH batteries deliver remarkable run time per charge, which is a big plus, especially if you need a tool for continuous use. What about power? This Panasonic packs up to 390 inch-pounds of torque--as much (if not more) than anyone needs in a cordless tool. The motor's speed control allows full torque at any speed, so you can apply full torque while still maintaining control. The tool features dual speed ranges of 65 to 450 and 200 to 1,450 rpm. The 1/2-inch chuck takes bigger bits. The first thing you notice about this tool, however, is how compact it is (the chassis measures only 8-1/2 inches) and how comfortable it feels in your hand. The soft-pad grip provides extra cushion and the tool's balance is superb, two important features if you wield a cordless day in and day out. The tool lacks an onboard bit holder, but that's about all it lacks. The 3-1/2 amp batteries are ventilated, so they last longer, delivering up to 1,200 charges and recharges. This drill is a smart buy for plumbers, electricians, carpenters, and even woodworkers--in short, anyone who wants a small, compact drill that packs a lot of torque and is built to last. The package includes a 55-minute universal charger and hard-plastic carrying case. --Jon Groebner ... Read more

Features

• Two 3.5 amp Ni-MH battery packs for longer run time
• Delivers 390 in./lbs. of torque
• 1/2-inch keyless chuck offers big-bit capacity
• 55-minute charge saves time
• Compact and lightweight for all-day use

Amazon.com Review

Impressively compact, lightweight, and comfortable to use, Panasonic's 15.6-volt drill/driver fits into tight spaces where other bulkier drills won't. The 3 amp NiMH batteries deliver impressive run time per charge, which is a big plus, especially if you need a tool for continuous use. What about power? This Panasonic packs up to 390 inch-pounds of torque--as much (if not more) than anyone needs in a cordless tool. The motor's electronic speed control allows full torque at any speed, so you can apply full torque while still maintaining control. The tool's dual speed ranges are 65 to 450 and 200 to 1,450 rpm. The 1/2-inch chuck takes bigger bits. The first thing you notice about this tool, however, is how compact it is (the chassis measures only 8-1/2 inches) and how comfortable it feels in your hand. The soft pad grip provides extra cushion and the tool's balance is superb, two important features if you wield a cordless day in and day out. The tool lacks an onboard bit holder, but that's about all it lacks. This drill is a smart buy for plumbers, electricians, carpenters, and even woodworkers--in short, anyone who wants a small, compact drill that packs a lot of torque and is built to last. The package includes a 45-minute universal charger and a hard-plastic carrying case. --Jon Groebner ... Read more

Features

• Two 3.0 amp NiMH battery packs provide 50 percent longer run time
• Delivers 390 in./lbs of torque for big applications
• 1/2-inch keyless chuck handles larger bits
• 45-minute charge saves time
• Compact and lightweight for all-day use

Features

• Built in Belt Clip and LED light that turns on when the trigger is pulled a great feature for cabinet installation
• Includes Two High Capacity 3.5Ah Ni-MH Battery Packs
• First Impact Tool with 3 speeds allowing the user to set the proper speed for a specific job
• First Impact Tool with an Electronic Clutch, Digital Readout, and Auto Shut-off
• First Impact Tool with Tighten (Snug-Up) Function, if the fastener is not fully set release, then pull the trigger again and it will tighen another 1/4, 1/2 or 3/4 turn depending on if it is a low, medium or high torque application

Features

• 425 in.lbs Torque in low speed and 1550 RPM in high speed give you the versatility for any job
• Includes Two High Capacity 3.5Ah Ni-MH Battery Packs
• Includes Model EY3531 6 1/2" Blade 18V Wood Circular Saw
• 280 Cuts of 2 x 4 Pine on one single battery charge, the industry leader in run time
• Includes Model EY6950 1/2" Chuck 18V Hammerdrill/Driver

Features

• Shoe bevels to a 50-degree angle and can cut 2 x material at a 45-degree angle in one pass.
• Includes One High Capacity 3.5Ah Ni-MH Battery Packs
• 6 1/2" 48 Tooth Thin Kerf Carbide Tipped Blade for Fast Clean Cuts
• The Blade is located on the left side of the saw for clear vision when cutting
• 280 Cuts of 2 x 4 Pine on one single battery charge, the industry leader in run time

Features

• 1 Year warranty, 30 Day satisfaction guarantee
• Easily converts from straight to pistol form
• Can be used with iether the 15 minute or 1 hour charging systems
• Two speed gearbox, 200 or 400 RPM
• Multi-stage clutch plus drill setting

Amazon.com Review

Impressively compact, lightweight, and comfortable to use, Panasonic's 15.6-volt drill/driver fits into tight spaces where other bulkier drills won't. What about power? This Panasonic packs up to 390 inch-pounds of torque--as much (if not more) than anyone needs in a cordless tool. The motor's electronic speed control allows full torque at any speed, so you can apply up to 390 inch-pounds of torque while still maintaining control. The tool's dual speed ranges are 65 to 450 and 200 to 1,450 rpm. The 1/2-inch chuck takes bigger bits. The 2 amp ni-cad batteries deliver solid run time and charge in just 30 minutes. The first thing you notice about this tool, however, is how compact it is (the chassis measures only 8-1/2 inches) and how comfortable it feels in your hand. The soft-pad grip provides extra cushion and the tool's balance is superb, two important features if you wield a cordless day in and day out. The tool lacks an onboard bit holder, but that's about all it lacks. This drill is a smart buy for plumbers, electricians, carpenters, and even woodworkers--in short, anyone who wants a small, compact drill that packs a lot of torque and is built to last. The package includes two 2 amp ni-cad batteries, a 30-minute universal charger, and a hard-plastic carrying case. --Jon Groebner ... Read more

Features

• Compact and lightweight for comfortable all-day use
• Two 2.0 amp ni-cad battery packs
• Delivers 390 in./lbs. of torque
• 1/2-inch keyless chuck offers big-bit capacity
• 30 minute charge saves time

Reviews (1)

Get the one with NiMH batteries
For only a few dollars more (at the time I wrote this less than $!0) you can get the same drill with far superior NiMH batteries. 50% more charge and no "memory effect". I'm not sure why Panasonic/Amazon are even offering this package. ... Read more

Features

• FREE Prazi Bigg Lugg cordless drill holder and lantern a $40.00 value
• Two 3 amp NiMH batteries
• 45-minute universal charger (7.2- to 24-volt NiMH or NiCd batteries)
• 390 in./lbs. of torque
• Includes carrying case

Features

• 1 Year warranty, 30 Day satisfaction guarantee
• Huge 650 in/lbs. of torque
• Compact size 6-3/4" long and only 3 pounds
• Fully charges battery in only 15 minutes
• 1/4" hex drive with locking collet

Features

• One-year warranty, 30-day satisfaction guarantee
• 3.0 amp batteries generate long run time
• Batteries charge fully in 45 minutes
• Compact size: less than 11-1/2 inches, weighs only 8.1 pounds
• Pneumatic hammer mechanism, hits harder and lasts longer

Reviews (2)

Strong performer
We buy our tools for concrete construction and use corded rotary hammers on an almost daily basis for dowels and anchors as well as fastening bracing for stairs and tapcons for forming.
There was some reluctance spending ... [so much] for a cordless tool but we tested ours first at Berlands House of Tools here in the Chicago suburbs before purchasing.
The Panasonic performs as well as our corded Milwaukee SDS pistol grip hammer drill.
The battery life is long, about 100# 3/16" holes, 1 1/2" deep
or about 15# 5/8" holes for dowel rods.
Charging takes around 40 minutes or so.
The kit comes with 2 batteries, some of the competitors only provide 1. The charger also works with the smaller batteries on the other Panasonic tools.
The corded tools still have the edge but the gap is narrowing.
If you are looking to drill into concrete get an SDS, the bits are easy to find at Home Depot or Lowes and they outperform the regular chuck by a wide margin.
This drill isn't cheap, but the convenience it provides was worth the expense.
If you were to purchase one rotary hammer you would be happy with this one!

Worth every penny!
It's well known Panasonic manufactures high quality cordless tools but this rotary hammer is in a class by itself. Block walls aren't even a challange. Structural concrete is nearly as easy. This hammer's light weight and compact size allow it to fit where corded tools can't. Holes can be started with one hand--particularly useful when on a ladder and trying to drill from an awkward position. It isn't cheap, but when compared to a cordless Hilti rotary hammer, it's a bargin. If you work on construction sites before power is readily available, and you need to drill multiple holes (7/8" solid bit capacity), this is the tool for you. Mine has replaced all my corded and cordless hammer drills and rotary hammers (1" and under capacity) that I carried on the truck. Frequent uses are: rigging TV mounts, bolting data racks to walls and floors, hanging A/V components to structural concrete, attaching various brackets and speakers to block walls, drilling penetrations for conduit, etc.

If you invest in this tool, you'll be glad you did. ... Read more

Amazon.com Review

Impressively compact, lightweight, and comfortable to use,Panasonic's 12-volt drill/driver fits into tight spaces where other(bulkier) drills won't. But what really sets this drill apart from thecompetition is its unique electronic speed control. Unlike other12-volt drills, this Panasonic delivers full torque at any speed, so youcan apply up to 293 inch-pounds of torque while still maintainingcontrol. This drill is a smart buy for plumbers, electricians,carpenters, and even woodworkers--in short, anyone who wants a small,compact drill that packs a lot of torque and is built to last. Itweighs just over 4 pounds (with battery) and is (only!) 8 inches long.The hard-rubber handle is very easy to grip during constant use, evenif you have smallish hands. In addition, the forward/reverse switch iseasy to reach with your trigger hand. In fact, the tool's superiorergonomic design--never mind its great performance--is enough win somepeople over. The tool lacks an onboard bit holder, but that's about allit lacks. The package includes two ni-cad batteries, the 45-minutecharger, and a high-impact plastic carrying case. Even the case is welldesigned, as it features replaceable clips. --Jon Groebner ... Read more

Features

• Speed: low 50-350 RPM & high 180-1300 RPM
• Includes: 2 Ni-CAD batteries, 45min universal charger and carrying case
• Max torque: 293lbs
• Typical application: general construction / plumbing / electric & carpentry

Reviews (8)

MegaSuperior drill driver
The chuck alone is worth the extra cost. Size, weight, balance and power make it chosen over my other cordless drills by Milwaukee, DeWalt and Porter Cable. I use the other three when I have lots of room, mainly to save the batteries in the Panasonic or we need a hammer-drill. We try to save the panasonic for all the driving and tight spot drilling. The chuck locks up as tight as a keyed chuck with real precision. Full power at low speeds is nice. the electric brake is good and the motor is outlasting the other tools according to motor odors.

panasonic 12V 3/8 cordless drll
I recieved this drll as a gift for chrismas. My friend told my wife about it as he is a cabinetmaker by trade and they have 3 of them in the shop. Well I wasn't to be disappointed. I have small hands, but find that the erogonomics fit my hand perfectly. It is well balanced and the forward and reverse are right where you expect them to be. I especially like how you chuck up the bit. This drill has the power it takes to do the job with less effert. I had a Porter-cable and I would choose the Panasonic hands down.

The precision instrument of Drill Motors
I have had this drill (actually it's predecessor) for over 10 years. I bought it just as I started working on "Hook", the movie. It had one feature I found too compelling not to try: the speed controller gives FULL or MAXIMUM TORQUE at ALL speeds! That means you don't have to give it more gas to twist harder. That translates into control! Fine, precise control. Amazing. Now after all those years of super hard use, I must replace it. The batteries are ready for the recycler. I am going to get the 15.6V 1/2" model to replace it, and I am sure it will ROCK! Way to go Panasonic! As a Product Designer (too) I applaud your work!

(PS: The main shaft could be harder, as mine bent slightly after a drop...but it still makes Makita owners blanche!)

Leslie Ekker, SFX Modelmaker

Second to none
It just leaves the other brands gasping for air. High torque in the low speeds and just a great feel to it. Drives screws in any surface with ease. Try a different brand then try tha panasonic and you'll be convinced.

Best drill in the shop
We fight over this drill. The loser gets the DeWalt. The second loser gets the Black and Decker. (Battery drills) Great balance, smaller, fits in tighter places. Gets swiped when you go to the bathroom, DeWalt left in it's place. ... Read more

Amazon.com Review

An impressively compact cordless tool, Panasonic's 12-voltdrill/driver fits into tight spaces where other (bulkier) drills won't.But what really sets this drill apart from the competition is itsunique electronic speed control. Unlike other 12-volt drills, thisPanasonic delivers full torque at any speed, so you can apply up to 293inch-pounds of torque while still maintaining control. The drill's1/2-inch chuck also takes big bits, unlike many 12-volt drills. This drillis a smart buy for plumbers, electricians, carpenters, and evenwoodworkers--in short, for anyone who wants a small, compact tool thatpacks a lot of torque and is built to last. The hard-rubber handle isvery easy to grip during constant use, even if you have smallish hands.In addition, the forward/reverse switch is easy to reach with yourtrigger hand. In fact, the tool's superior ergonomic design--never mindits great performance--is enough to win some people over. The toollacks an onboard bit holder, but that's about all it lacks. The packageincludes two of Panasonic's long-lasting 3 amp NiMH batteries, a45-minute universal charger, and a sturdy plastic case. Even the case iswell designed, as it features replaceable clips. --Jon Groebner ... Read more

Features

• One-year warranty
• Includes two 3.0 amp NiMH battery
• Compact: 8-3/16 inches long
• Lightweight: 3.9 pounds
• 293 in./lbs. of torque

Reviews (13)

Best power tool I've owned
It's not often that I'm willing to take the time to write about a product, but these Panasonic drills are far and away the best power tools I've ever owned. I just got my new 12v drill/driver for Christmas, and so far I've been just as pleased as with my first Panasonic. I'm an engineer and a tinkerer, not a tool salesman - and all of this is completely true.

I bought my first Panasonic 12V when I decided to finish my basement about eight years ago. Then, like today, the Panasonic was the top rated, but they were relatively unknown, and hard to find. At that time, they were the only ones with a T-handle (like everyone has today).

Panasonic also had a few features that no one else had then - or has today. First and most important was the electronic speed control. The Panasonic has full torque at the lowest variable speed - so you can turn the drill at 20 rpm and have the same torque as at 1200 rpm. Every other drill I've tried, including DeWault, Ryobi, Makita and Porter Cable, builds up torque as the rpm's increase. This means that you have to drive a screw at high rpm into tough material. Not with the Panasonic - you simply drive into any material at any speed you choose. The electronic control also has an electronic brake, which stops the drill immediately when you let off the trigger - again for control. Another feature of the Panasonic was the fast charging system. My old drill could charge a 12v battery in 15 minutes - when everything else took 3 hours. My new 12v takes 30 - 40 minutes with the nickel metal hydride long life battery - I haven't run a battery out yet to see how long these last. Finally, the Panasonic has the best ergonomics of any of the drills I tried. My new one is slightly smaller, lighter and better balanced than my old one - which was very good. Here's what I really like - set any other T-handle drill on a table top in an upright position. Now bump the table and see how hard it is to knock the drill over. Most of them fall over easily and crash to the ground (unless they've got one of those heavy 18v battery packs). Not the Panasonic - this thing stays put - ready for you to pick up and use. This is a great time saving feature.

As I said, I used and abused my original Panasonic 12v for eight years. I drove more than thirty pounds of 3 ½" wood screws for the basement project. I've hung countless pictures, drilled holes, mixed paint and drywall plaster with it - even planted bulbs in the yard with an auger. I've dropped it off ladders and tables, and it just keeps on going. A couple of years ago I dropped the charger and broke it - but I kept using the drill when I found out a Ryobi charger would charge the battery. Recently the original, NiCD battery started giving out. A replacement battery is about $60-75 and the charger is $100. So it didn't make sense not to spend $179 on a new drill, with a new charger, and two of the new NiMH batteries. I bought the 12v instead of the 15.6v to maintain compatibility with the old drill. The 12v has plenty of power for me. So I got a new drill essentially for free - not that I really need it.

best birthday present
Just used my new 12volt Panasonic cordless drill today. Have never had a cordless drill before and I looked for a long time at a lot of other drills. The Panasonic is a quality tool- I had to drill into hard maple window casings and the Panasonic did a great job. Fits my hand well and is well balanced. Terrific torque! I look forward to using this tool for a lot of odd jobs around the house. A quality tool for the handyman/do it yourselfer. Don't expect to be using my cord drill for many more projects.

I only buy Panasonic cordless
Panasonic cordless drills are incredibly well made. I have beaten my pair nearly to death. Several years ago I left mine on the roof accidentally over the winter, for several months of rain and snow. When the snow melted, there it was, and it has worked perfectly for years since. There are a lot of less expensive, excellent cordless drills out there. If you want the best--the best made; the best heft; the best size-power ratio--I recommend this drill.

Just about perfect!
This cordless drill is as close to perfection as a tool could be. I have 2 Porter Cable 19.2V cordless drills besides this one, and I have found myself using this drill more and more. It is relatively light weight, well-balanced in the hand, surprisingly powerful for a 12V drill, recharges the NiMH batteries (2 included) quickly, the one-hand keyless chuck is a joy to use and most of all, the workmanship quality of this drill is simply beautiful. A work of art!

The only one for me
This drill is by far the best. I use it professionally, and wouldn't buy any other. It has the longest running and most powerful battery on the market. It is incredibly powerful, even for a 12 volt drill. If you need more power, buy a corded drill. The other great feature is that you can tighten the chuck with one hand, and crank down with one hand and the bit won't slip. That feature alone is worth it. You don't need channel locks or pliers to tighten the bit, as I read in a review of cordless drills. Buy it and you will be completely satisfied. ... Read more

Amazon.com Review

Panasonic has found a way to pack a lot of power into a compact frame. With 293 in./lbs. of torque in low gear, this two-speed Panasonic 12-volt, 1/2-inch cordless Hyperformance drill muscles through the toughest jobs. It can also hurry through easier applications, delivering 1,300 rpm in high speed. Electronic speed control and 18 preset torque settings allow you to choose just the right power for the job, minimizing the risk of stripped screws. Yet, with all its power, this drill is still remarkably lightweight and maneuverable enough for anybody to use, thanks to the engineers at Panasonic. This drill has a sleek, ergonomic design, with conveniences such as onboard bit storage, an electronic brake, and a comfortable single-button forward/reverse switch. Everything is clearly marked and easy to use. Plus, the 3 amp hr NiMH battery provides the highest capacity available, meaning less downtime and fewer trips to the recharger. --Carl Thress ... Read more

Features

• 3 amp/hour NiMH batteries are the highest capacity batteries available
• 12-volt motor delivers 293 in./lbs of torque in low gear, 1,300 rpm in high gear
• 1/2-inch keyless chuck offers big-bit capacity
• Lightweight and compact: only 3.9 pounds and 8-3/16-inch long
• 18-stage clutch provides precise torque control for screwing operation

Reviews (3)

cordless drill
I have used this drill for a year now, nice and light, powerful, and easy to use. Best tool I have owned.

Great Drill...Batteries???
The drill is great. It has plenty of power and the electronic speed control is nice. Add all this to a well balanced drill and you have a handsome package. However, I have had this drill for three years and I had to replace both batteries already. They seem to build a memory and I don't know how to prevent it from doing so. I have not used the drill extremely hard or abused it at all, to the contrary I use it but clean and maintain it better than most. I am not sure about the Ni-MH batteries,...

Great Drill
When I first started looking for a cordless drill,
I was looking for power, the more the better.
However, with that comes a ton of weight as well.
I had to change my mind set to what
I actually was going to use the drill for.
I'm a weekend warrior type person.
The drill I buy was going to be used for ordinary
do-it yourself work around the house.
I could not justify buying a drill with
so much torque that it could snap a head
of a lag bolt off.
I then started to look for a drill
that had decent torque with a compact
and lightweight design and with a good
battery life for driving screws.
Well, the Panasonic EY6407NQKW 12v.
fits the bill perfectly.
This unit is one of the smallest
and best balanced drills out there.
It has surprisingly good power.
It can drive a 1/4"x31/2" lag bolt in
without a pilot hole in a 4x4 P.T.
However, the real beauty of this unit
is in driving screws.
It drove 332- 2"deck screws using
a #2square bit into a 4x4 P.T. lumber
on a single charge.(No pilot holes either.)
AWSEOME! Other features I liked were
the clutch settings and the electronic
speed control.
The clutch settings are accurate,
and the electronic speed control
works great for driving stubborn screws in.
It also holds drill bits and drivers tight.
So if you are looking for a lightweight,
compact drill with decent torque,
THIS IS THE DRILL FOR YOU.
This deal also included the Big Lugg
which works great.
I would have given this drill 5 stars,
but I want to see how long the batteries last.
This is a nice unit. ... Read more

Amazon.com Review

Impressively compact, lightweight, and comfortable to use,Panasonic's 15.6-volt drill/driver fits into tight spaces where other(bulkier) drills won't. But what really sets this drill apart from thecompetition is its unique electronic speed control. Unlike other drillson the market, this Panasonic delivers full torque at any speed, so youcan apply full force--up to 390 inch-pounds of torque--while stillmaintaining control. This drill is a smart buy for plumbers,electricians, carpenters, and even woodworkers--in short, anyone whowants a small, compact drill that packs a lot of torque and is built tolast. It weighs just 4.4 pounds (with battery) and is (only!) 8-3/16inches long. The 1/2-inch chuck takes bigger bits. The hard-rubberhandle is very easy to grip during constant use, even if you havesmallish hands. In addition, the forward/reverse switch is easy toreach with your trigger hand. In fact, the tool's superior ergonomicdesign--never mind its great performance--is enough win some peopleover. The tool lacks an onboard bit holder, but that's about all itlacks. The package includes two of Panasonic's long-lasting 3 amp NiMHbatteries, a 45-minute universal charger, and a hard-plastic carryingcase. Buy now and you'll receive a free Bigg Lugg tool holder with thekit. The Bigg Lugg is a great device for securing your new drill toyour belt. --Jon Groebner ... Read more

Features

• Includes carrying case
• Two 3 amp NiMH batteries
• 45-minute universal charger (7.2- to 24-volt NiMH or NiCd batteries)
• 390 in./lbs. of torque
• Free Bigg Lugg cordless drill holder

Amazon.com Review

Impressively compact, lightweight, and comfortable to use, Panasonic's 15.6-volt drill/driver fits into tight spaces where other bulkier drills won't. The 3-1/2 amp NiMH batteries deliver remarkable run time per charge, which is a big plus, especially if you need a tool for continuous use. What about power? This Panasonic packs up to 390 inch-pounds of torque--as much (if not more) than anyone needs in a cordless tool. The motor's speed control allows full torque at any speed, so you can apply full torque while still maintaining control. The tool features dual speed ranges of 65 to 450 and 200 to 1,450 rpm. The 1/2-inch chuck takes bigger bits. The first thing you notice about this tool, however, is how compact it is (the chassis measures only 8-1/2 inches) and how comfortable it feels in your hand. The soft-pad grip provides extra cushion and the tool's balance is superb, two important features if you wield a cordless day in and day out. The tool lacks an onboard bit holder, but that's about all it lacks. The 3-1/2 amp batteries are ventilated, so they last longer, delivering up to 1,200 charges and recharges. This drill is a smart buy for plumbers, electricians, carpenters, and even woodworkers--in short, anyone who wants a small, compact drill that packs a lot of torque and is built to last. The package includes a 55-minute universal charger and hard-plastic carrying case. --Jon Groebner ... Read more

Features

• Two 3.5 amp NiMH battery packs provide 70 percent more run time
• Delivers 390 in./lbs. of torque to handle big tasks
• 1/2-inch keyless chuck handles large bits
• Extremely compact design--chassis measures only 8-1/2 inches
• 55-minute charge saves time

Features

• 1 Year warranty, 30 day satisfaction guarantee
• High speed Masonry drilling, 30,000 BPM at 2,000 RPM
• Heavy duty Positive-Lock 1/2" keyless chuck
• Compact and lightweight, only 5.1 pounds
• Includes 2 3.0 Amp Ni-Mh batteries, longest run time availible

Reviews (1)

Best kept secret in cordless drills!
After replacing my 18v Ryobi drill for a so called less powerful one, I have found it to be an excellant piece of kit.
The first thing you notice is how small it is, but pick it up for the first time you can tell this drill is quality through and through. The lockable chuck is an a work of genuis, once you tighten it pull the chuck collar to the rear, you can forget about the bits ever slipping or falling out, It is just as reliable as an SDS drill I feel.
The hammer mode is excellent too, its extremely quick and powerfull and would just go through any brickwork with a decent maisonary bit with ease, you can feel the bit driving into the wall but can feel very litte vibration or fatique, for hammer drilling 5.5mm holes into walls this beats all the so called more powerfull drills hands down!.
The only down side is that there is no where on the drill to attatch your screwdriver bits onto, but with only 5 torque settings this drill is seen more as a hammer drill than a screwdriver. I still use mine for driving and undoing screws and lets be honest, do you need 20 torque settings on a drill in the first place?. 5 torque settings does me fine.
Panasonic do a good job on explaining on what and what not to do in order to keep your drill and batteries in good order with the instruction manual provided, something I didn't get with my last cordless drill.
A Word of warning! You will have to get used to locking the chuck every time you insert the bit. If you don't and you hit the chuck against the wall you will seriously damage the chuck!. I done this and had to get the chuck replaced. But it was fixed within 3 days under the warranty. But there is no doubt this is a serious piece of kit!. ... Read more

Features

• Also includes 2 ni-mh batteries, 1 45 mn universal charger and case
• Drill/driver has 390 in/lbs. of instant power
• 1/2 inch keyless chuck, and 18 stage clutch
• Metal saw cuts cool-reduced heat buildup due to unique design of blade
• 3100 RPM for fast cutting