Features

• Includes NST2018, NHT518, NS118, 3-18 volt batteries, a 3-port charger, the storage station and all wall mounting hardware
• Easily mountable storage station that makes all three products easily stored
• All products use the same 18-volt batteries
• Battery charger can charge all 3 included batteries at the same time
• Part of the Black and Decker 18-volt products' system

Reviews (5)

Black & Decker CCC3000 does what it says it'll do
I have an acre lawn with lots of landscaping, and this is perfect for my needs. It does take more than one battery pack to trim my whole yard, but with 3 interchangable packs, it is no challenge for it. And with 18 volts, the power provided is more than adequate for the yard. The blower is powerful and makes my yard look much neater, and the hedge trimmer is great. Along with an edge hog electric edger I purchased this year, I have all the tools to make a manicured lawn. You can't beat the price of this set of tools either. All 3 items can be purchased seperatly, but you'd pay quite a bit more for them doing that.

Does Just What I Want
Tried all three units. The guard on the trimmer serves as a trim guide. The trimmer cuts through the suckers that sprout at the base of harvested trees. The blower is just fine for clearing debris from the porch and deck. Can't get much easier. Don't worry much about dead batteries. With the three supplied, normal use is not a problem. If I REALLY want heavy duty (for the few times I need it) gas is the way to go. But who wants the stink and bother?? For the price I paid, my son was amazed the wacker had an auto line feed.

Great tools, great convenience
The tools themselves worked great. I was pleasantly surprised at how powerful the blower was. The line trimmer did an acceptable trimming job, and actually did great at the edging work. The hedge trimmer make quick work of my low hanging tree branches.

I loved the convenience of the two hanging units, one for the tools themselves, and one for the charging unit. Helps to keep an organized garage.

Highly recommend this set for the typical homeowner.

very happy and pleased
Have used this set for the first time the other day and am very happy to say all three tools work great. the ease of use of cordless is just fantastic! The trimmer worked great on ivy and though I feel a little like I sold out with the blower (can't stand the pollution; noise and exhaust) it is quiet and if used responsibly is great to have for those hard to reach/sweep areas. I would highly recommend.

great "bang for the buck" for the AVERAGE home-owner
for the owner of a "modest" yard,..this is an INCREDIBLE bang for the buck. the weed trimmer and the hedge trimmer did their jobs excellently and the sweeper exceeded my expectations to the Nth degree. ALL THREE tools were up-to-the-task of trimming, hedging, edging and sweeping. i was MOST concerned about battery life. i manicured my entire yard with ALL THREE tools with nary a gasp from the battery (15-20 minutes use from each,..NOT counting pauses between "uses"). the package comes with a 3-station battery charger AND a "hanging station" for all three tools (PLUS,..you can pick up an extra 18 volt battery or two at your local megastore IF you need it [for large yards]). i could not be happier.....weeds and grass got whacked, my various hedges got trimmed AND my carport and driveway were cleared of debris in a matter of moments. AND....THE NOISE....DID I MENTION THE NOISE??? THAT'S BECAUSE THESE ARE VERY QUIET, NEIGHBORHOOD-FRIENDLY POWER TOOLS. i am quite satisfied and would HIGHLY recommend the CCC3000 kit to ANYONE with "fairly" modest lawn care needs. ... Read more

Features

• Drives more than 600 nails on one battery charge (sold with two batteries)
• Fires a full range of 18-gauge nails from 5/8 to 2 with a firing rate of two nails per second
• Professional nail gun features at an affordable do-it-yourselfer price
• Innovative electronic status indicator tracks condition of nailer
• Eliminates the need for a compressor, hoses or power cord for grab and go convenience

Amazon.com

We can't think of anything we'd want to add to this little hummer. It's incredible what B&D has engineered into this system (we don't think it's fair to call it a "screwdriver"). The 5-foot tape measure fits on board, or you can remove it for separate use. Dual speed range lets you drill holes at high speed and drive screws at the slower speed. A 23-position clutch, just like what's on the big boys, will keep you from stripping your screws. But get this: Unlike conventional cordless screwdrivers and regular power drills, this tool's handle easily locks in three positions for tight areas and awkward spots. Genius! And just like the "real" drills, this one's got an accessible forward/reverse rocker switch for backing screws out, too. Here's something, though, that the big-boy drill makers should pick up: It's got on integrated light so you can always see your work surface clearly. For the money, we haven't seen anything like it. --Kris Jensen-Van Heste ... Read more

Features

• On-board bit storage conveniently holds a 1/16" pilot bit and double-ended screwdriving bit
• 6-volt drill and screwdriver, tape measure, light, and more in one convenient cordless tool
• 2-speed gear box gives you a low speed for screwdriving and high speed for drilling
• 3-position pivoting action for maximum flexibility and versatility in tight areas
• Integrated light with separate on/off switch illuminates dark work areas

Reviews (8)

Keyless Chuck
I love the rechargeable aspect of the tool. It's so light and easy to work with. The only thing missing is a keyless chuck so steel grinders can be used with it.

Feature Packed for Under $30!!!
This is the best *cheap* cordless screwdriver I have ever used. The ergonomics of this driver feels good in the hand. Plenty of power and charge in the 6V battery. The clutch eliminates the problem of overtightening and the drill speed is great for quick pilot holes. The two bit holders and LED light really add to the convenience. I haven't used the tape, which is pretty cheesy, but I imagine it could come in hand for a quick measurement. The only have two complaints, but for less than $30 they really don't matter... 1) Should have a LED to indicate that it is charging, 2) Wish the battery was replacable. For the money, this is an indispensible gadget.

Strong screwdriver
I have been very pleased with this screwdriver ~ it is strong. I have two along with three of the 3.6 volt B&D drivers and use the 6 volt for larger, more demanding jobs (i.e. book shelf projects, etc.). It is handy because it can be set in several different positions. It is good looking (I like macho looking tools) and it is very handy. Mine all hold good, long charges but then I am used to handling Nicad batteries because I build and fly a lot of radio control planes and you have got to know how to keep your batteries healthy or your plane becomes a "kit" again. I have just ordered a third 6 volt. I also collect tools and believe that you never have enough.

Great little screwdriver
Purchased this as a Christmas present for my wife and have been installing blinds ever since. While it's not intended to take the place of an 18 volt drill, it does a great job screwing and unscrewing. The forward, reverse rocker switch is more convient than others that we have used and the angles are handy. I would not recommend it as a replacement for the DeWalt heavy duty cordless screwdriver (my favorite), but it's lighter and 1/3 the price. Well worth the money....

Great All Around Screwdriver
It does everything as advertised.

Pros: different torque settings, 2 drive speeds, small LED light, pivot point, overall "feel".

Cons: drilling is only for light duty jobs (otherwise get a real drill), charging time takes too long. connection for the charger plug is right in the pivot point and it doesn't let you use it while plugged in.

Other than the charging issues(that's why I won't give it 5 stars) but it's a great tool at a decent price. ... Read more

Amazon.com

Black & Decker has taken five popular home workshop tools and put them together into one compact, cordless unit in the Black & Decker 14.4-volt cordless multi-tool kit. The 14.4-volt model offers five interchangeable, locking heads that provide drill/driver, circular saw, jig saw, router and sander/polisher features. While not as powerful or feature-laden as most stand-alones, the multi-tool provides an excellent starting point or addition to a home enthusiast's arsenal. The drill head operates at variable speeds of 0-700 rpm. A 24-position clutch provides up to 115 in./lbs. of torque. And a 3/8-inch keyless chuck makes bit changes easy. The 3-3/8 inch circular saw features a 20-tooth carbide tipped blade and operates at 0-1,100 rpm. A spindle lock allows quick blade changes, while a thin kerf minimizes waste. The jigsaw features Black & Decker's exclusive, tool-free QuickClamp blade change system. A see-through bezel offers a cleaner view of the cut line, while a blade support roller keeps the blade straight for an accurate finish. The router features a 1/4-inch collet and spindle lock. Good visibility, micro-depth adjustments and an operating speed of 0-8,000 rpm make it well-suited for small, high-speed project work. The sander/polisher is also versatile. It reaches into tight spaces, accepts Mouse attachments, and spins at 0-8,000 opm.--Carl Thress ... Read more

Features

• Detail sanding pad works in tight corners
• One tool with five attachments for drill/driving, sanding/polishing, cutting and decorative edging
• Drill/driver has 24-position clutch and keyless chuck
• Saw has 3-3/8 inch blade for cutting 1x material
• Router operates at 8,000 rpm for high-speed applications

Reviews (11)

Do you all work for Black and Decker?
It's a great idea but if you are going to do a day or weekend long project that would require one or more of the attachments, get extra batteries! The only attachments that didn't kill the battery quickly were the drill and maybe the saw wasn't great. The other pieces especially the router and jigsaw drained both batteries noticably in about 15 minutes. I've found the router adequate only for edge and laminate work but way underpowered for anything else.
Don't even get me started on the safety start mechanism. You must depress a button on the attachments before the trigger will engage. This is especially maddening and awkward with the router.
Save your money and buy the real versions of each tool you really need instead of this poor compromise on all of them.

I LOVE mine! What a fantastic deal! No complaints...
I first saw the Black and Decker multi-tool at Home Depot, but the one they had only had 3 tools and was only 12 volts. (Still pretty cool.) This one has FIVE tools and is 14.4 volts. All the tools are great. You get two batteries, and they last a long time. I'd rate this as one of the best values in tools I've ever purchased. I love my Black and Decker multi-tool. (One improvement though... a catchier name...)

Looks like a great product
I just ordered this product and it looks to be exactly what I need. I just need power tools to do small projects around the house. This is a perfect mult-tool product for me. Just the basics is all I need. I don't need a top of the line circular saw, jigsaw, etc. I just need something that will handle the small projects that I work on and this appears to be exactly what I need.

Perfect, teh best tool
Amazing. I bought mine at Amazon and my cousin brought to me. I was waiting for another machine, but this is fantastic!!!
Congratulations AMAZON, congratulation Black and Decker. I think that I will not find another tool like this. Very, very good.
Buy one and tell me....

Simplier and Faster
I see this tool in a store and I'd like it, but I was not sure if it realy works, so I asked to the tool-man of the store to set it for and exibition for me the next day. The performance was much better of what I expect. The tool not only works fine at home but also at some heavy duty work. ... Read more

Features

• Infinite Clutch with micro-adjust torque, for driving various size screws
• Dual Port Charger charges two batteries at once and has a maintenance mode for extended life batteries
• Removable chuck allows you to go from drilling a hole to driving a screw faster, without changing bits
• Quick Connect bit change system, gives you the ability to quickly and easily use a full range of hex shank drilling and screwdriving accessories
• 3 Position gear box, for high torque driving and high speed drilling control

Features

• 3-in-1 cordless sander for finish sanding, random orbit sanding and detail sanding
• Stud finder for hanging pictures, coat hangers, shelves and more, through material up to 3/4 inches thick
• Innovative hand saw cuts wood, plastic, and metal and is perfect for outdoor pruning
• Powerful drill/driver for a wide variety of heavy drilling and driving applications
• Spring loaded batteries for easy installation and removal and less downtime

Amazon.com

Bulls Eye Auto Leveling Laser Technology means you don’t have to worry about accuracy. The Crosshair Laser Level works handheld as well as affixed to a wall—-all you have to do is put it where you want it, push the button and you’ve got two dead-on accurate vertical and horizontal lines. A neat feature is the locking switch, which maintains your level line for you. The unit is light as a feather, has rubber grips for a good, comfortable hold and is a great value. Homeowners will find dozens of uses for it, from establishing a plumb line without messy chalk to hanging pictures and shelving. It’s powered reliably by a good old 9-volt battery.--Kris Jensen-Van Heste ... Read more

Features

• Includes a 9 volt alkaline battery, target cone, hanging pin, key-hole hanging attachment, and storage case
• Automatically levels providing vertical and horizontal lines
• Hanging pins fasten unit to wall for hands free convenience
• Lines lock into position for square lines on any surface
• Includes target cone to help illuminate light

Reviews (2)

B&D CrossHair
This tool is easy to use and adequate for the weekend DIY'er. It only illuminates two laser lines (up and to the right) which can be a limiting feature. Lines, however, were level at short distances (less than 10'). I have no desire to have to use the marking target for greater distances. Lock layout feature is good. Quality of beam is adequate to poor - you have to decide whether to save the line or split it when marking - line fades near end of projection and in places completely dissappears on wall (smooth, previously painted drywall). Marking for pin-up to wall is good b/c it is in line w/both beams. For myself - this gadget is going back where it came from while I look for something else. For the money - you get what you pay for - avoid the stud finder combo.

On The Straight and Narrow!!
I bought this to use around the house for various things and I am pretty impressed so far. Before I even attemted to use it, I double checked it's plumb and level accuracy with a plumb bob and a Stabila 72" level ($120)...It was dead on!!! Overall it is a great tool to have in the toolbox if your an avid DIYrrr like me. Some of the things I have used it for: Squaring up stud walls, Hanging cabinets, Hanging pictures and Chair rail, Making layout marks for floor tiles and even squaring up the foundation walls for a shed I built!! It makes building things a fun and joyfull experience, I can't wait to use it again!! (Just make sure that you check it for accuracy before you initally use it!!) ... Read more

Amazon.com Review

Black & Decker's 3.6-volt PowerDriver is perfect for assembling furniture, mounting shelving, changing hardware, or any project where turning a standard screwdriver would be a painstaking process. The rocker switch toggles easily between forward and reverse, and the automatic spindle lock allows you to manually start screws or finish them without stripping or overtightening. When installing hardware in hard-to-reach places, the narrow nosepiece gives you an extended reach. --Dori Anvinson ... Read more

Features

• Two year home use warranty
• Automatic spindle lock for greater control when starting and finishing screws
• Forward/reverse
• Narrow nose-piece for extended reach in tight places
• Runs at 180 rpm and delivers 40in./lbs. of torque

Reviews (18)

No Stripping Or Over-Tightening
Let me start out my saying that I love my wife for getting me this as a gift. This is the gift that just keeps on giving.

The Black & Decker 9074TB 3.6 Volt Screwdriver is perfect for any job around the house that would involve the painstaking task of driving in screws. I just finished putting up several shelves in my bedroom, and it has never been easier thanks to this wonderful product.

The automatic spindle lock gives you much better control, allowing for no stripping or over-tightening, or even just for simple, manual use. Its sleak design and narrow nose gives you the ability to get into tight places with great ease.

This is a well-designed product with a super charge life. Besides being durable and fairly lightweight, the wall-mounting charge base should make it a lot easier to find. This screwdriver works extremely well, and will make a fine addition to any tool box.

I LOVE this thing.
I purchased some inexpensive "assembly required" furniture (coffee table, entertainment center, nightstand, and few other kits). As an afterthought, I purchased this rechargeable screwdriver. I'm glad I did.

Cheaper than a full function drill (and a lot lighter), this screwdriver is small, maneuverable and just what the doctor ordered. No more sore forearms and wrists. So far I've use it to assemble furniture, take apart PC cases, screw down hard drives, add new faceplates for phone jacks, and even drove a few screws into drywall.

When the battery runs out, or you need extra torque, you can lock it into manual and turn it like a regular screwdriver. It is well built and rugged. I highly recommend this product.

great for the average do-it-yourselfer
I got this for my spouse and he loved it. Its easy to use, runs as long as he needs for the minor projects and repairs he does. If you are a professional who'd use a tool like this, it won't last nearly as long as you'll need. The target audience should be the average John or Jane who really just wants to make the few times a screwdriver is needed a month less work so things get fixed in a timely fashion.

JUNK - Broke after using TWICE
I received this driver for Christmas, used it twice, and then heard a loud grinding sound. After taking off the drive head, I noticed that two metal posts securing plastic gears had sheared!

By comparison, my Skil driver is going on 10 years!

B&D is JUNK!

Useful, sort of.
I used to use a B&D cordless screwdriver, but gave it away when I found it often took as long, or longer to use this tool than using a manual screwdriver. Sure, it's faster when you have a LOT of screws or very long screws, but a cordless drill is faster still, and has the advantage of variable speed and more power. Using this screwdriver to drive long wood screws is an excercise in patience as you watch it sloooowly drive the screw in and then quit halfway as it runs out of power.

Cordless screwdrivers are cheaper than drills, true, but overall I think the classic 7.2volt Makita cordless drill is just about as compact, much more versatile, much more powerful, lasts much longer and will drive a lot more screws on a charge. ... Read more

Features

• Includes tripod, 9 volt battery, hanging strap, and laser
• 360-degree laser line levels across and around rooms
• Laser line automatically levels
• Micro-adjust tripod extends to 5' in height
• Detachable head hangs from strap for higher applications

Reviews (2)

Enough for most
I bought this thing to install a pretty complicated set of kitchen cabinets. Worked pretty well for that task. This is the onle self leveling laser line generator at this price, so you have to cut it some slack. You will have to decide if you want to pay for self-leveling, accuracy, or ruggedness. You will not get all three in this sub$200 category. Read on-

LASER HEAD- Simple design that sets three 129 degree laser line generators on axis and mounted on a gravity gimble. There as a result of the 3 lasers, there are 3 gaps in the line. Not a showstopper, but nice to know. There are no servos, so there isn't much to break. But, there isn't anything keeping the line steady. It takes a few seconds for the line to settle once disrupted- a pain if you are making "fine" adjustments, as you have to wait for the thing to stop wobbling to see if you are at your mark. Lastly, the laser line varies in thickness from about 1/16" to almost 1/4" at the right/left limit. Not good for accuracy, but adequate for many homeowner jobs.

TRIPOD-The tripod is flimsy, but adaquate for non-professional use a few times a year. When fully extended, it is about as stable as a stout reed. Any movement near it upsets the laser line. Not an issue if you use it on a concrete slab. You extend all but one section by pulling them out until they snap. Once set up, the last extension is a gear driven section that gives you about 8" of "fine" adjustment using a locking knob. Flimsy, but it works.

STORAGE- This is the best thing going for it. The thought and engineering that went into storing the unit is unbelivable. The whole thing folds up and stores in itself in a package no bigger than a large thermos.

I'd look at spending $50 more on a manual level/manual rotate, rugged and crazy accurate Stabila 02123 Laser Spirit Level Kit, or $100 more on a manual leveling/auto rotating, rugged DeWalt DW071KI for any regular use. Both can draw a plumb mark, somthing that the B&D cannot.

this thing is so cool
i got this thing to draw a line in a room to install a chair rail. it took ten minutes. i don't think i could have gotten it level and straight in three hours if i tried with a tape measure and a bubble level. it is well worth the money in the time it saved.

i was also able to visualise how the room would look before i drew the line and i made adjustments to the height before i put one line on the wall. that was an added bonus i had not anticipated.

it is well designed and space age, it looks like something from science fiction. i would recommend it to anyone who believes in the right tool for the right job. ... Read more

Features

• Removeable accessory cap
• Variable speed reverse for drilling and driving control
• Keyless chuck for quick and easy bit changes, rubber grips for added comfort
• 26-position clutch
• Includes magnetic bit tip holder

Reviews (1)

Kitchen remodeling guy
Great cordless drill/driver for around the house handy work. Fast recharge, battery lasts decently long. Inexpensively excellent product. ... Read more

Amazon.com

The Black & Decker CRS144B FireStorm CutSaw is designed to cut through metal pipes, PVC, deck frames, fence posts and 2x lumber. But the surprisingly powerful CutSaw works just as well in the yard pruning trees as it does in the shop cutting pipe and timber. Powered by a 14.4 volt nickel cadmium battery, the CutSaw delivers up to 3,000 spm. The result is fast, smooth and accurate cuts every time. A variable speed trigger switch allows precise control on every cut. An electric brake eliminates wind-down. And a rotating shoe fits tightly against the cutting surface, ensuring straighter cuts. Even with all of its power, the CutSaw is surprisingly easy to use. It weighs just six pounds (roughly 1/3 the weight of some comparable units) and features tool-free blade changing with the help of a spring-loaded lever. All in all a solid addition to any home enthusiast's arsenal.--Carl Thress ... Read more

Features

• Compact, lightweight design (6 lbs.) for reduced fatigue
• Quick Clamp tool-free accessory change
• Variable-speed trigger, 0-3,000 spm, with electric brake
• Pivoting shoe with open channel for maximum visibility
• Rubber overmolded boot and handle for comfort and control

Reviews (1)

The comercial really is accurate (Imagine That)
Bought one of these saws for my Mom who is 70 years old so she could do some minor pruning of trees in here garden and yard...WOW she is now a saw hog. The weight was just right and did not tire her, what she calls flabby arms. As well as superior ease in handling she was also impressed with the durability of the battery after a full charge. It was a little more than I wanted to pay but the money I will save on trips to her house and electical tape from fixing cut through extension cords will more than be payed for. She liked it so much and I was impressed with her ability to use it, I'm getting one for the wife as well. Maybe now I can hit the links on a weekend. ... Read more

Amazon.com Review

If your work requires you to drill or drive in a lot of tight or awkward places (under sinks, overhead, inside cabinets, between pipes, etc.), this Black & Decker five-position drill/driver may be the perfect tool for you. The drill features a compact design and swiveling head that rotates 90 degrees front and back of center, with 45-degree stops along the way. A straightaway, inline stop even provides added reach for tight spaces in which a standard power drill might not fit. Lightweight and nimble, this Black & Decker drill is extremely maneuverable, as well. A comfort-grip handle and three-finger trigger provide excellent control, while a 24-position clutch and variable speeds of 0 to 700 rpm allow the drill to power through wood, steel, or masonry without damaging bits or stripping screws along the way. --Carl Thress ... Read more

Features

• Spring-loaded batteries slide off the drill for easier removal
• Exclusive five-position drill head provides maximum accessibility and versatility
• Quick Connect bit change system allows hassle-free accessory changes
• Three-finger trigger switch is designed for maximum comfort and control in all five positions
• 24-position clutch offers increased versatility for a variety of screwdriving applications

Reviews (7)

Great Product- ready when you are.
I recently bought a house for the first time and did not have a cordless driver. I picked this up, thinking that it might come in hand. Little did I know that EVERY single project I encountered, would involve this little guy. I have had it for several months, now, and have only recharged it a couple of times- it holds it's charge well and run like a top. I have to be honest, I have not used the rotating head on it at all, but it is narrow enough to fit in tight places and the accessory bits are just about all you could ever need. My 12v CORDED DeWalt is going to be doing nothing but collecting dust, with this thing in my arsenal. This is one of the best $50 I have ever spent.

Great versatility and power
Black and Decker has a great product with this little gem. It is much more versatile than a drill and is light weight as well. It has far more torque than the wimpy cordless screwdrivers, even more than Dewalt's 7.2V screwdriver, with the same great quick release adapter built in. I find this much easier to use than a standard cordless drill with a standard chuck (even the keyless ones) for drilling pilot holes and then driving screws. And as for driving, how about 3.5 in deck screws into treated lumber and even 4x4's. This baby has the power.
Another great feature is the five positions you can put the head in, to give you access in close quarters with enough power to do something with it. Great for hard to reach places.
It comes with a molded plastic case and an assortment of drive bits, drill bits, and nut drivers to get you started. If you want to use standard drill bits, buy yourself a quick release drill chuck. The only draw back is the long charge time (no quick charger) and only one battery. Otherwise I would have given it a 5.

Sticks Its Neck Out
This is a handy tool, solidly built and you'll find a surprising number times you'll be glad for the swivel neck for getting into awkward places. The neck locks firmly into place, with no play. The quick change bit system makes changing bits fast and painless, and the three finger trigger is nice and comfortable to use with great control over drill speed.

Two things niggle me about it though. As someone else mentioned, it seems to have low torque even at the highest setting, so you should only get this for fairly light household and assembly chores. And the battery charge cap does not give any visual clue as to when the battery is fully charged, so you have a hard time knowing when it's full again.

Other than that, it's a great drill!

i like it.....but what happens when the battery dies
well you may have read my previous review praising this tool. It IS a good tool, but I've checked ...Amazon and so on, and I cannot find a battery for this tool.
I even checked the [manufacter] website, nothing listed. So be wary, you may only get to use this for a short time
thank you

Excellent Drill for the value
I just received this for XMas, and I am very pleased with it so far. The ergonomics are very nice, and the swivel head is excellent. It seems to have decent power (I was driving 3" screws through 2x4's with ease). Not sure about battery life yet, as I have only charged it once so far. The only 2 downsides, are the slow charge time of 3-6 hours, and the "chuck" is a 1/4" connection only - no real chuck (although it is very fast and easy to switch 1/4" bits, and it comes with a nice assortment to get you started). I think this drill may replace my 6-year old Makita as my primary drill! ... Read more

Features

• 850 inch-pounds of torque for heavy duty jobs
• Hex chuck for quick and easy bit changes
• Twice the speed and four times the power of other cordless drills for high production
• Impact mechanism prevents kickback and stripping screws for less downtime
• 35 percent shorter than conventional drills for work in tight quarters

Amazon.com Review

When it comes to versatility, few tools can match the Black & Decker MT1203B cordless multitool featuring interchangeable drill/driver, jig saw, and sander/polisher heads. Each attachment locks securely into the ergonomic base quickly and with little effort. As a drill/driver, the multitool features a 24-position, keyless chuck with variable speeds ranging from 0 to 700 rpm. An electric brake stops the chuck in less than one second, for even better control. The jig saw features a tool-less quick-clamp blade changing system, a 45 degree bevel, and a blade support roller for more accurate cuts and a longer blade life. It cuts through wood, thin-gauge sheet metal, plastic, or composite tile, with speeds ranging from 0 to 3,000 spm. As a sander/polisher, the multitool works much like Black & Decker's Mouse sander. Its hook-and-loop fastening system makes accessory changes quick and easy, while the included detailing pad provides a fine finish in even the tightest spaces. --Carl Thress ... Read more

Features

• Soft cloth carrying bag for easy storage
• One tool, three attachments, for drilling/driving, sanding/polishing, and cutting
• Quick-clamp blade change system for fast blade changes
• Detail sanding pad for reaching into tight corners
• Variable-speed drill/driver operates at 0-700 rpm

Reviews (1)

Seems like an awsome deal!
While I never used the product mentioned, I own a Black and Decker 18v drill and am totally satisfied. Considering all the tools, this product seems like a real score for the price. I would love a gift like this...

At 700 RPM and 12v, the drill might only be useful for light to medium duty work (cutting doorknob holes or drilling into metal seems like it would be pushing it) but for easy work like making holes in the wall to hang stuff or assembling Ikea furniture it should be adequate. ... Read more

Features

• The Mobile Workshop includes a Workmate 375, Power Pack tool bag, FireStorm 18 Volt Drill, 18 Volt Circular Saw, 18 Volt Cut Saw, 18 Volt Vacuum, 18 Volt Work Light, Bulls Eye Laser Level & Stud Finder, two 18 Volt batteries and a charger
• 18-Volt 7 Tool Mobile Workshop with storage system
• Power Pak tool bag features a power strip with six outlets and a 15' power cord for versatilty
• Mobile Workshop helps you cut, drill, drive, line, find studs, light your project area and clean up
• Mobile Workshop keeps your tools in one place where you can charge them as well

Reviews (3)

Great 18 Volt tool kit
My kit is very similar but not quite the same it's the FSC618K-2

Anyway I've read some reviews that say the chuck on the drill can't hold a bit at all and its only real use is as an 18-volt screwdriver. I've run a 1/2" bit to the hilt into a 4X4 several times just to test it, and there was no slippage at all. I'm not really sold on the pop off chuck, but it has saved time when I was building some books shelves recently. But I would say that 280 lbs. of torque is plenty for most applications, but have to admit that I am a novice and use the drill/driver around the house. I've only had it a little over a month but have played around with it, and am very impressed with it. Especially when compared to most of the other 18 volt drill/drivers out there. The circular saw cuts 2X4 with no problem and I have used it to cut about 10, 1"X6 "shelf's to length with plenty of power left over. The Cut Saw is just cool. I haven't had time to use it much but in your hands it feels as if it has enough power to do just about anything you might need it to do. The vacuum is a step up from the basic dust buster does a fine job and has great battery life. The flashlight is bright and I've used it to drain the partially used batteries before recharging. My kit is a little different in that I do not have the laser level/stud finder or the work table and the tool bag looks smaller, but this is as close as to what I have as I could find. My kit included the Radio/charger FS100 Stud Finder The Drill Circular Saw, the Cut Saw Light and Vacuum. But other than that the kits are very similar. I bought four extra batteries and the fast multi-volt charger on E-Bay so in case I ever do get busy with the kit I'll be able to keep it powered. I would say you would have a hard time beating this kit for the performance and price (check E-Bay). Plus it's been fun to play with, and I've read DeWalt builds the Firestorm stuff. I am looking forward to putting it to a real test. But I'm sure it will pass any tests I put it through with flying colors.

The tools make the man!
Someone once told me a man is only as good as his tool. Well, when I purchased the Black and Decker 7-tool combo kit I became a man and for a year I was king of the neighborhood. I had become the most respected carpenter in the project. I built four house that year and was going strong as I was branching out my business. Until one night I awoke to find some of my tools missing. I figured I must have left them on a job or something. The next day I searched for them but to no avail. The next night I woke and found the rest of the kit gone. The next night I burned the candle at both ends waiting to find the culprit. I had fallen asleep and felt something tugging at my underwear. I awoke and jump out of my seat when I found little gnomes racing through the house holding my underwear in victory. I pulled my best 007 and tracked them down in the crevices of the basement. There they were singing "We are the tool and underwear gnomes. We need lots of supplies to make it on our way. Big business is a freight train on a path to money right away."
I stood there alone and cold as a breeze went up my pajamas, begging for my atleast my hammer in trade for my silence. They simply told me it was my word, a middle aged working class man, against that of a GNOMES. I guess it was back to the drawling board, without a pen.

Great Product
The product works great and is easy to assemble. The hardest part is finding out how to put all the tools into the bag. On the first day, I used the circular saw, drill, vacuum, and light. All worked as well as my corded tools. I am a convert to cordless. One nice touch is the power distribution plugs in the front of the bag. My only confusion is why? With cordless tools, do you need more outlets? If they want to improve the product, add another battery and the Radio Battery charger. ... Read more

Features

• Includes a 9 volt alkaline battery
• Take guesswork out of finding studs up to 3/4" deep
• Senses studs by detecting differences in wall density
• Lightweight and comfortable to hold
• Audible and visual display

Reviews (1)

Great addition to toolbox
We recently moved from an older home where the walls were so solid you could hang pictures anywhere. our new place is new though and as seems to be the usual case uses a very thin kind of plaster board. After unsuccessfully trying to hang some pictures and having them fall down I got this and hey presto, everything is now up and most importantly staying up. The manual wasn't very good and it took me a few goes to get the hang of it, but I'd recommend it to anyone who has pictures, and, or heavy mirrors to hang. ... Read more

Features

• Infinite Clutch with micro-adjust torque, for driving various size screws
• Dual Port Charger charges two batteries at once and has a maintenance mode for extended life batteries
• Removable chuck allows you to go from drilling a hole to driving a screw faster, without changing bits
• Quick Connect bit change system, gives you the ability to quickly and easily use a full range of hex shank drilling and screwdriving accessories
• 2 Position gear box, for high torque driving and high speed drilling control

Features

• Wall mountable storage case
• Quick Connect Bit Change System, for fast drilling to screwdriving
• Electronic level illuminates at all 90-degree angles
• 0-800 rpm, maximum torque of 125 in./lbs.
• Infinite Clutch with micro-adjust torque

Reviews (4)

drill bit slippage galore
this thing couldn't hold a drill bit if it's life depended on it. it's been relegated to driving screws with the hex head.

Drill parts problems
The Black&Decker drill 04A (with 1350 rpm) operates with brushes against the motor. When they wear out parts like these are hard to find - if not impossible. The drill is two years old and has performed beautifully until now and I cannot find the part that is worn out...

Good for home
I got this tool for Christmas 2001 and I've used it a lot. I have used it for a variety of home repair uses and found it to be very well suited for those projects such as furniture assembly, hanging curtain rods, hanging blinds, bathroom fixtures such as towel racks, hanging flower boxes with larger screws into my home. Batteries work fine and last a reasonable time. I have not tried anything super heavy duty. I am very pleased witht this and plan to buy one for my sister as a house warming gift. It is heavy enough for everything I've tried but light enough to be easy to handle.

Not enough drill for a serious home repair person,
I bought this after Christmas and was snagged by the price. Only Craftman comes close to this price for a 12v.

I needed to drill and torque down a banister. After charging both batteries (over 6 hours for both). I started on the project but the drill lacked the needed torque for the lag bolts and the batteries were quickly depleted and needed another charage.

The real issue of a serious drill is torque and "Durability" of the battery(s)... With this B&D the battery charge took a very long time and then the batteries were not, using the definition for "durable" > "able to exist for a long time without significant deterioration".

IF you are a serious a serious home repair person spend the extra [price] and move up to B&D 14.4volt Firestorm Drill - both torque and battery durablity will be significantly better. ... Read more

Features

• Rugged storage case provides durable and convenient storage
• Bonus flashlight included
• Removable chuck allows you to go from drilling a hole to driving a screw faster, without changing bits
• Quick Connect bit change system, gives you the ability to quickly and easily use a full range of hex shank drilling and screwdriving accessories
• Spring loaded battery allows for easy installation and removal of batteries