Features

• Fine motion knobs on left and right sides with friction-braked rotation and endless horizontal drive.
• 26X magnification with 325' working range.
• Minimum focus of 1 foot.
• 1:100 Stadia Ratio for easy distance estimates.
• Fits all standard 5/8x11 tripods.

Features

• Built-in filtering compensates for bright sunlight and electromagnetic interference
• Made in the USA
• 8 channel front & back display with three accuracy modes (Fine, Med. & Coarse).
• Memory feature presevers last position of the beam if the unit is moved out of the plane of light.
• Three distinct tones (high - on grade - low) assist in targeting from a distance.

Features

• Standard 5/8 x 11 mounting thread fits flat or dome head tripods
• 1/4 -inch accuracy at 100 feet
• Four C- batteries provide 100 hours of intermittent use
• Variable speed 360 degree rotation
• Built in trivet for vertical alignment projects

Amazon.com

What used to be a two-person job now gets done alone, thanks to user-friendly leveling, plumbing, and grading power and a clear, easy-to-read LCD display with intuitive, push-button operation. Amazing technology eliminates the need for leveling screws and exacting adjustments; instead, the unit levels itself using state-of-the-art electronic sensors interfaced with motors. Say goodbye to re-leveling and subsequent rechecks. Accuracy is priority one, and CST/Berger is a stickler for it, delivering 1/8-inch accuracy at 100 feet (or 3mm at 30 meters). Rotation, sweep (chalk line), point to point, and spot modes let you get the job done right the first time. The backlit display has an energy-saving auto shutoff, prolonging battery life. This model will handle jobs from drop-ceiling installation to concrete work and excavations. The package includes a labor-saving ceiling bracket, target, tripod and rod. --Kris Jensen-Van Heste ... Read more

Features

• One-year warranty
• Easy-to-read LCD display
• Chalk line mode and 360-degree rotation
• Accuracy within 1/8-inch at 100 feet, 1000-foot working range
• Water and dustproof exterior

Features

• Powerful 635nm to 650nm diode
• Accuracy 1/4 inch 100 feet
• Three precision glass vials
• Operates on three AA- batteries
• Unique graduated inclinometer offers precise positioning

Reviews (2)

May be useful for extending level, but inaccurate
I bought one of the lower models (the model just below this one, without the magnetic base) and the beam spreader as an inexpensive way to do level/plumb 'chalk' lines.

Well, the way this thing works is that you snap on the beam spreader/splitter attachment to the end where the laser exits. Surrounding the exit hole is a metal ring, and the attachments snap on magnetically (which is the same way you can store them in the level itself, if you look at the two holes on either side of the center vial)

For the beam spreader (the chalk line) there are two bubble vials fixed into the attachment perpendicular to each other, and it is those that you must level out for vertical/horizontal lines. However, I found that when I tried to do so, it was near impossible to get the line exactly level or plumb. This is due to the fact that rotating the spreader even the smallest bit will cause the ends of the chalk line to move several inches depending on distance to the target.

The bottom line is that it is impossible to trust that the line is level just based on a particular user's eye view of what the bubble vial says. I put the thing on a tripod, got the bubble vial as perfectly level as I could, and measured the resulting beam with another level. Not even close.

I may have had a bad beam spreader, but it's too expensive to guess and a waste of time if I have to check that the laser level is level! I recommend getting a cheaper torpedo laser level that just beams a dot for extending a level mark, and maybe one of CST's Gizmos. (I just got one and it is very cool, and the cross beams are dead on accurate)

My 2 cents.

Work Alone with the CST/Berger Lasermark Magnum Package
Repair and renovation of my old house, built in 1924, includes inside and outside work. This work involves application of skills from all the building trades and landscaping. This level package has become my work partner or teammate. I did add to the package with the rotary adaptor, a tripod and the remaining beam splitter lens.

The "Lasermark Magnum" package and accessories have allowed me to work alone in laying out a rock wall patio that includes excavation of 20 cubic yards of dirt from the 10 feet by 40 feet area, raising the two feet stone wall, without a footing, to six feet, with a footing, and laying out the slope for a drainage system. The "Lasermark Magnum," with the beam spreader, has helped me determine the level of the structure's floors and to raise them as necessary and possible. The tool package has also allowed me to "shoot" a line for a cold water pipe from the basement to new patio area and to layout a replacement L-shaped basement stairway. I have also been able to use the moved dirt to regrade low areas of the yard with appropriate slope for drainage and appearance.

Previously, I would have required a builder's level package with a helper to hold a rod for the layouts and probably a string line and level for determing slopes. Looking at the red dot or the red lines is much easier and by my own early comparison with the mentioned tool options, much more accurate. While the red line or dot can be difficult to find, or follow, in bright sun or through shrubbery and grass it is much less difficult than I had anticipated.

While I have not yet used the tool to determine plumb, I would trust it's accuracy. Based on my needs, this tool package carries one of the best values to me as a helping hand. ... Read more

Features

• Magnetic Base
• Graduated face in inches & cm

Features

• One person, push button operation
• Visible red laser light
• use horizontal and vertical lines together or separatly
• Heavy duty internal coaxial compensator
• 5/8 x 11 mounting threads

Features

• Quick release leg locks allow for quick and easy tripod set up
• Hollow for optical and laser plummet instruments
• Flat head design makes setup fast and easy
• Extends from 38" to 63"
• 3-1/2"x8 Mounting head

Features

• Quick release leg locks allow for quick and easy tripod set up
• Hollow bell housing for optical and laser plummet instruments
• Flat head design makes setup fast and easy
• Plumb bob hook attached to bell housing
• 5/8x11 mounting screw

Features

• Removable rotating top plate allows you to mount instrument without changing your settings
• Double Adjustable Column allows for greater extension range
• 47" to 115" inch height allow for a wide range of height adjustments
• 5/8x11 mounting screws fit all standard laser level bases
• Perfect for interior use

Features

• 5/8x11 mounting for use with all standard instrument tripods
• Allows for 17" of vertical travel to increase heights of instruments
• Gear driven provides for smooth operation and elevation control
• Crank handle folds to eliminate breakage during storage and transport

Features

• This unit has a flat head to level instruments on.
• Made from the finest hardwoods available and expertly treated finished and painted
• Wide frame extension legs constructed with 1" diameter wood dowels
• Opens to 72" high closes to 42" Short
• heavy duty poly webbing shoulder strap.

Features

• This unit has a flat head to level instruments on.
• Made from the finest hardwoods available and expertly treated finished and painted
• Wide frame extension legs constructed with 1" diameter wood dowels
• Opens to 72" high closes to 42" Short
• heavy duty poly webbing shoulder strap.

Features

• Converts Berger 1/2x20 instruments to 5/8x11 tripods

Features

• Tape blade is a highly visible yellow allowing for increased tape visibility on the job site
• 100' fiberglass tape graduated in feet and 10ths
• Reel features a 3:1 gear ratio for faster rewinding
• Waterproof, dirt-resistant and washable for increased useful life
• More durable than steel, more functional than cloth tapes

Features

• Tape blade is a highly visible yellow allowing for increased tape visibility on the job site
• 100' fiberglass tape graduated in feet and inches
• Reel features a 3:1 gear ratio for faster rewinding
• Waterproof, dirt-resistant and washable for increased useful life
• More durable than steel, more functional than cloth tapes

Features

• Tape blade is a highly visible yellow allowing for increased tape visibility on the job site
• 200' fiberglass tape graduated in feet and 10ths
• Reel features a 3:1 gear ratio for faster rewinding
• Waterproof, dirt-resistant and washable for increased useful life
• More durable than steel, more functional than cloth tapes

Features

• Tape blade is a highly visible yellow allowing for increased tape visibility on the job site
• 200' fiberglass tape graduated in feet and inches
• Reel features a 3:1 gear ratio for faster rewinding
• Waterproof, dirt-resistant and washable for increased useful life
• More durable than steel, more functional than cloth tapes

Features

• Tape blade is a highly visible yellow allowing for increased tape visibility on the job site
• 300' fiberglass tape graduated in feet and 10ths
• Reel features a 3:1 gear ratio for faster rewinding
• Waterproof, dirt-resistant and washable for increased useful life
• More durable than steel, more functional than cloth tapes