Features

• Rubber non-marring tip, which stores on magazine when not being used
• Uses 3/8 to 1-1/4 18 gauge Brad nails & ¼ crown, ½ to 1 narrow crown staples
• 360 Degree Adjustable Exhaust
• Positive stop depth control
• Jam release lever located on side of tool

Features

• Lifetime Warranty--as long as blade is used for its intended purpose
• 60 teeth for crosscutting with a fine finish, carbide-tipped for long lasting sharpness
• 10 inch 60 tooth premium saw blade
• 6-degree hook angle for a fine finish cut
• Fits 10-inch miter and radial saws with a 5/8-inch arbor

Features

• Fits Delta 23-710 Sharpening Center
• 5" diameter
• 2" face widht
• Vitreous aluminum oxide for cooler grinding and sharpening
• 120 grit for quick material removal

Features

• Fits most contractor-style table saws to provide dust collection capability
• 4" outlet for use with standard hoses
• 14" x 14" base fits medium to large saws

Reviews (1)

NOT THE BEST FIT
This 14'' table saw dust hood is not the best fit on my platinum edition contractor saw.To fit properly you will need to either make a frame out of sheet metal or plywood to fit under the saw. Then attach the hood to that. Delta does offer adaptor plates (for a charge) that ties it all in very cleanly.That's what I bought.This hood is well made and will accept any 4'' hose no problem. Amazons price on this item is awesome. I've seen it elsewhere for 3 times as much so, buy it here.I do recommend this item it's a real must for anyone concerned about collecting dust and keeping a tidy shop.It can also be fitted to fit almost any shop vac. Now get out there and collect some dust. ... Read more

Features

• 3/8-inch capacity for creating 3/8-inch wide mortises
• Select Steel for long-lasting sharpness--Made in Austria
• Fits Delta 14-650 Hollow Chisel Mortiser, 17-935 and 17-924 Mortising Attachments for versatility
• Accepts diamond knockout blades

Features

• Fits Delta 28-195 10-inch Band Saw and others requiring a 72-1/2-inch blade
• 1/2-inch wide, cuts down to 2-1/2-inch radius
• 6 teeth per inch for fast cutting
• High carbon steel for long-lasting sharpness
• Tension-tested for strength and quality assurance

Reviews (1)

Delta does it again!!!!!
Wonderful product. Delta known for quality does it again. ... Read more

Features

• Dado and insert spindle for the 36-730 Cabinet Saw

Features

• 2 pack
• Fit Delta 31-120, 31-280, and 31-730 sanders and others requiring 12-inch adhesive-backed discs
• Adhesive-backed for easy installation
• Aluminum oxide abrasive for long lasting, efficient sanding
• 120 grit for efficient stock removal with a finer finish

Amazon.com

If you're shopping for a band saw, we don't have to tell you what an incredibly versatile tool it is to have in your shop. But we can tell you why this one is worth buying. Whether you'll use it mainly for resawing or for creative curved cuts, you'll appreciate everything from its rock-solid construction to its micrometer adjustment for ball bearing blade support and the blade guide blocks that assure absolute accuracy. The cast-iron table is a generous 16 by 16 inches and easily tilts 45 degrees right and 3 degrees left for bevel cuts. The max cut capacity is 6-1/4-inch thick, and even at that, with the 1-1/2 hp motor, you won't experience any bogging. Blade change, the least favorite job of band-saw owners, is really not so bad: There's a side take-out slot for the blade, and you won't even have to remove the rip fence guide rails when you're changing blades. We're impressed, too, with the Veri-Set quick-index tensioning system, designed to get you back to cutting wood and not fumbling with blade tension. We didn't hook up the press to a dust-collection system, so we can't vouch for how well the integral port pulls sawdust, but the rest of its features would make any woodworker happy.--Kris Jensen-Van Heste ... Read more

Features

• 4" integral dust port for efficient dust connection
• Powerful 1-1/2 HP, 115V guarded drip proof motor
• Micrometer adjustment for ball bearing blade support and blade guard blocks assure superior quality
• Full 16 inch by 16 inch cast iron table tilts 45 degree right and 9 degrees left for beveling operations
• capacity to cut up to 6-1/4 inch thick

Features

• Replaces standard fence body for more convenient use as a cut-off stop
• 12" long--won't protrude beyond front edge of table
• Extruded aluminum construction with built-in mounting channel
• Fits Delta Unifence Saw Guide

Reviews (1)

Beats clamping a piece of wood on your Unifence..
Well, the piece of wood is a lot cheaper, but it is nice to know that at least with this cut-off fence the edge is straight and parallel to the blade. It is also convenient since the tape measure on the fence still works, instead of having to compensate for the thickness of the piece of wood. ... Read more

Product Description

Delta Faucet Single Handle Single Handle Kitchen Faucet at Faucet.com ... Read more

Features

• For 3-Hole Application
• Spout Reach: 8''
• Shown With Lever Handle
• This Faucet Is ADA Compliant

Amazon.com

The truth is we smirked when we read Delta's description of this tool as a "finishing machine." "Please," we thought, "it's a sander." But here we stand, apologizing for our smugness. This is, indeed, a finishing machine that will handle virtually all of your finishing jobs. Start up the heavy-duty, 1-1/2 hp motor and try out the 2100 rpm disc sander and the 3030 rpm belt unit, perfect for both metal- and woodworkers. A huge range of jobs can be done at this machine by adding sanding drums, abrasive flap wheels, buffing wheels, flexshafts and other accessories. We love the large table size on both sanders, and check out the surface—they're specially ribbed to block any distortion. The belt table tilts up to 45 degrees out and 20 degrees in, and the disc table tilts 45 degrees out for uncompromised angle finishing. Have an awkward workpiece? No problem. The belt will operate at any angle—vertically, horizontally or anywhere in between. It's on the spendy side for the home woodworker, but it's the perfect addition to virtually any professional shop.--Kris Jensen-Van Heste ... Read more

Features

• Belt operates at any angle-vertically, horizontally or any degree in between
• 1-1/2 HP, 240V 60 Hz., 3450 rpm single phase TEFC motor
• Handles 90 to 95% of all your finishing operations
• 4" dust port can be used with 5 micron bag provided or can be attached to a standard 4" dust collection system
• Integrated mobile base for ease of mobility

Features

• Provides proper clearance for use with dado sets
• Installs easily using existing table insert screws
• Fits Delta 36-600 table saw

Reviews (2)

A Perfect Fit...
I just bought a Delta TS300 10" table saw (use to be called a model 36-600, by the way) and started looking for dado sets and dado inserts. The Delta website is either perfectly useless or outright wrong when it comes to cataloging the correct accessories for each table saw. So I took my standard insert over to my local tool dealer and asked him to match it up with the correct dado insert. It took him all of 30 seconds to figure it out.
The 34-672 Dado Head Insert is the one to get for the following 10" Delta table saw models: TS300, 36-600, 34-740, and 34-670.
And don't be fooled into buying an 8" dado blade set just because the insert opening is big enough for it. If the motor is less than two horsepower (2 HP), then you should stick with a 6" dado blade set. Anything under 2 HP is considered "underpowered" for an 8" dado. Remember, you now have alot more metal spinning on that arbor, so don't burn out a $... motor just to impress your friends and neighbors.

Bad info on the Delta Web Site
I recently bought a Delta 36-650 10 inch table saw. After looking on the Delta web site, it listed this Dado Insert (34-672) as the correct one for this saw. Well, it was wrong. The correct dado insert for the 36-650 saw is the 34-264 (for 7-8 inch dados), there is a seperate part for 10 inch dado blades. So... I guess I'll be sending this one back... :( ... Read more

Features

• 5" long to fit Delta and other standard scroll saws
• Plain end design for smaller entry holes when cutting inside the workpiece
• Precision ground tooth design for smoother, more accurate cuts
• Contains six each of all three sizes of PGT blades

Features

• Installs quickly and easily on drill presses with 1-3/4" to 3-5/8" columns
• Stores bits and other tools in easy reach
• 11" diameter provides plenty of storage space
• Swivel mount allows easy positioning
• Predrilled holes to hold 3/32" to 1/2" drill bits

Reviews (1)

Every drill press should have one
What took me so long to get one of these? Construction of this swiveling tray is nice heavy molded plastic. Installation is a breeze. Now I can keep my chuck key, drill bits and parts and sundries within arm's reach. Reasonably priced. ... Read more

Features

• 5 pack
• 80 Grit
• 1" wide by 42" long
• Aluminum oxide abrasive
• Fits Delta 31-34- belt and disc sander and others requiring 1" by 42" belt

Features

• Adapts Delta Right-Tilt Unisaws for dust collection
• Allows you to maintain a cleaner, safer work environment
• Installs easily over opening under motor cover for quick set up
• Outlet fits 5-inch dust collector hose for efficient chip collection

Reviews (4)

Dust Collector Review
Overpriced in light of what you get (or don't get). They need to include the 5" to 4" adaptor (to get it down to the size most people use) and the correct screws to atach it. Otherwise it works fine. It keeps the dust to a minimum. I purchased a standard 5" to 4" heating vent adaptor at Home Depot and pop riveted it on so it would stay put. Extra cost and work that should not have happened if Delta had designed it correctly in the first place.

Not the right one to get for most users
Unless you have industrial-type 5" dust collector lines, get the Model 50-355, also sold here, instead. In spite of what it says on the 50-355 page, it works fine for both left-tilt and right-tilt Unisaws. The 4" port on the 50-355 is also the standard size for home shop dust collection systems.

Works great
I don't agree with the other person who rated it poor. Although it is very expensive for this little piece of sheet metal, prices are similar for air ducts you buy at the hardware store. The other person that rated it was right about not including the bolts that are needed though, which is poor on Delta's part. Otherwise it would have gotten 5 stars. I don't have any gaps with it on my Platinum Edition Unisaw, and it does a great job at getting rid of the dust on the ramp. I check every once in a while, and only get a little bit of piling up in the lower corners, next to the hole. This is far better than my old way of jamming the dust collector hose into the opening and just getting some of the dust, plus this connector gives the DC better suction. Since there is nothing else that fits the opening to this saw besides a cheap plastic option that works very poorly, this is your best bet to properly remove dust. I would recommend it.

lot of money for a bit of sheet metal
I must say that I was somewhat disappointed in this item. It is made out of cheap galvanized sheet metal, and looks to be worth about a quarter of what Delta is charging for it. Worse still, it does not fit my Special Edition Unisaw all that well -- there are significant gaps at the sides of the piece, and the bottom of the connector doesn't fit snugly against the dust ramp on the Unisaw. As a final indignity, they include the wrong type of screws to attach it to the saw. (I had to go buy two hex head bolts, washers, and nuts at the local hardware store in order to attach it.)

I kept mine, because I do so much work with my Unisaw that I really need to attach my dust collector to it, but Delta definitely needs to go back to the drawing board on this one. ... Read more

Features

• 100 Grit
• Bulk roll, enough for 14 abrasive changes