Features

• Six-month warranty on Delta Reconditioned Tools
• Five speeds from 620 to 3100 rpm for drilling a variety of materials
• Adjustable depth stop for repetitive drilling
• Cast iron table tilts 45 degrees left and right for angled drilling
• Rack and pinion table raising mechanism

Features

• Fits Delta 28-150 9-inch Band Saw and others requiring a 59-1/2-inch blade
• 1/4-inch wide, cuts down to 5/8-inch radius
• 6 teeth per inch for fast cutting
• High carbon steel for long-lasting sharpness
• Tension-tested for strength and quality assurance

Features

• Includes 1/4" roughing out gouge, 1/8" spindle gouge, 1/4" round nose scraper, 1/4" skew chisel, and 1/16" parting tool.
• Ideal for miniatures and detail work
• High speed steel blades
• Hand-polished ash handles
• Individually hardness tested

Features

• Includes two year limited warranty on parts and accessories
• 5 HP, 60 hz., 3450 rpm single phase motor with a magnetic starter
• TEFC motor, two 10" cast iron extension wings, equipment mounting hooks
• See-through blade guard, 10" diameter carbide-tipped blade, miter gage, table insert
• Set of three matching v-belts, dust port for 4" dust collection hose and instruction manual

Features

• 5 pack
• 120 Grit
• 1" wide by 42" long
• Aluminum oxide abrasive
• Fits Delta 31-34- belt and disc sander and others requiring 1" by 42" belt

Features

• Fits Delta 31-695 and 31-280 sanders and others requiring a 6-by-48-inch sanding belt
• Aluminum oxide abrasive for long lasting, efficient sanding
• 100 grit for efficient stock removal with a finer finish

Features

• Belt unit can be used vertically or horizontally for a variety of applications
• Tilting table has a miter gauge slot and can be used with either the belt or disc unit
• Belt tensioning lever and tracking control knob provide easy belt replacement and adjustment
• Built-in 2-1/4-inch dust port for use with a vacuum or dust collector

Reviews (1)

Best deal for your $$$$$
I purchased this sander locally. Took it home and had it up and operational within 10 minutes. You don't need a mount or special base for this. I set it up on a sheet of plywood without securing it and it's pleanty heavy to stay put. The only issue I see is that you have to pretty much disassemble it to change the disk paper (hence the one star off). I can live with it. Well worth your $$$$$. ... Read more

Features

• Two Year Limited Warranty on machines, parts, and accessories
• Adds roll-away portability to Delta46-701 wood lathe for easy storage
• Steel construction for durability
• Foot-operated lever provides easy raising and lowering of base
• Inside dimensions 24-1/2" by 24-1/2" for easy installation

Features

• Fits Delta 28-150 9-inch Band Saw and others requiring a 59-1/2-inch blade
• 3/8-inch wide, cuts down to 1-3/8-inch radius
• 6 teeth per inch for fast cutting
• High carbon steel for long-lasting sharpness
• Tension-tested for strength and quality assurance

Product Description

Delta Faucet Signature Pull-Out Spray Kitchen Faucet at Faucet.com ... Read more

Features

• For 1 or 3-Hole Application
• Spout Reach: 9''
• Shown With Loop Handle
• This Faucet Is ADA Compliant

Features

• For use with Delta 36-865 Versa-Feeder Stock Feeder
• Lets you mount feeder to a variety of machines quickly and easily
• Mounts with out the use of clamps or drilling holes in you table top
• Quick, easy bolt-on installation with included hardware

Reviews (1)

BUY AN EXTRA POWER FEEDER BASE INSTEAD
I bought this base and never installed it. The idea of clamping a power feeder to a machine table never seemed safe to me and also you are limited to a corner mount. Instead get an extra base from Delta, part number 1347994 will get another base for $34.47. Then you just unscrew the power feeder from one base and screw it to down on another base. ... Read more

Amazon.com Product Description

Here's a beauty that brings stationary-model features to the benchtop. You get the capacity to drill to the center of a 10-inch board with a 3-1/4-inch stroke, and the table tilts left and right to 45 degrees with a positive stop at 0 and offers variable-speed control at the turn of a dial. Changing speeds is as simple as turning the knob, allowing you to drill at 500 rpm and up to 3,100 rpm. Have some repetitive drilling to do? The adjustable-position locking depth stop will take the trouble out of the job. We like the Shopmaster drill presses for their Delta precision and tight prices, but we have to admit that the rack-and-pinion table depth adjustment and the built-in gooseneck lamp on this model win our hearts. The three-jaw chuck will accept bits up to 1/2 inch, and when you're done drilling, just pop out the removable safety switch to prevent unauthorized use. --Kris Jensen-Van Heste ... Read more

Features

• 2 year limited warranty on machines, parts and accessories
• Variable speed from 500 to 3100 rpm for drilling a variety of materials
• Adjustable depth of stop for repetitive drilling
• Cast iron table tilts 45 degrees left and right for angled drilling
• Rack and pinion table rising mechanism

Reviews (5)

not a very well made machine
This drill press has been very disappointing. For a bench top, it is too heavy to lift so I made a stand for it, taking up limited space in my small work area. After using it for a couple of months things sort of flew apart. The main reason I selected this model was its ease of changing speeds with a simple turn of the dial. Since I have experience in machine and assembly, took the thing apart and discovered the reason was poor parts and design. While the variable speed mechanism is faily simple the design needs a little work. A set screw to hold the bearing in place on the upper motor pulley would have helped. It worked its way out of place (friction fit?) and there went the variable speed. Next, a little attention to the machining of the cap holding the spring above the motor pulley so it wouldn't bend the retaining ring out of it's grove on the motor shaft would help as well. I believe I have spent more time fixing the thing than it has given me doing the drilling tasks I bought it for.

POOR QUALITY AND DESIGN
I received the drill press in great condition and quickly from Amazon. It was easy to assemble and the instructions were well written (there was a lot of grease on every piece that made assembly challenging).

Once together, it functioned flawlessly-----for about 1 day! Then the variable speed function ceased working properly. Upon examination of the pulley system after removal of the top cover (which was nearly impossible to reassemble) it was noted that the spring system on the rear pulley did not work properly. The die-cast (cheap) rear pully had a small crack in it as well. I disassembled it and returned it to Amazon.

Subsequently, I purchased the Sears Craftsman 12" drill press and although you need to change the belt pulley ratio manually to adjust the speed, it has worked perfectly on a daily basis for months now and under heavy loads the motor doesn't even lag.

AVOID THIS DELTA DRILL PRESS!!

Nice heavy drill - with mechanical flaw
(...)Setup: 3 stars (the Delta shipping grease again)
Repair flaw: 1 star
Use When it isn't broken: 5 stars
Broken: Two times in 6 months - 0 stars...

This drill broke again today; the variable speed control snapped inside the housing. This second mechanical failure, combined with the wobbling chuck I have endured the last couple times I used it, have forced me to publicly condemn this machine as unfit to sell. I don't mind maintaining my machines occasionally, but I have put in over 8 hours of labor vs. less than one hour using the drill. Presently I am sick of it and will decide if I should try to fix it again, or just buy one from a different manufacturer.(...)

Delta Dp 250
First time buyer on Amazom. Great price, no tax, free delevery and I received the item eariler than expected. The unit was a bit heavier then I expected. Two areas that could be improved on are, there isn't a place to hold the chuck key. That would appear to be a simple task for Delta to incorporate into the design. The handle that raises the table could have been placed on an angle so as to not be so close the table. If one wants to increase the work surface area with a peice of plywood, you must provide a cutout for the elavation handle.
Other than that it appears to be a sturdy machine

Delta DP250 Shopmaster 10" Variable Speed Bench Top Drill Pr
I bought this equipment recently from Amazon.com. It was delivered on time as promised.
After some thorough degreasing the assembly was easy and uneventful.The variable speed system allows a lot of drilling versatility without touching the belt, but it is not ultra-smooth. It also requires weekly maintenance if you plan on using the drill frequently. The three spoke pilot wheel and the adjustable locking depth mechanisms are nice and easy in operation. The tilting table is OK but not at all easy to use. The finish of all major components seems to be basically per the standard for this price level. However in order to access the belt housing I needed to remove some screws that were jammed into the holes rather than cleanly treaded. After removing the top cover I decided to re-drill these holes, now everything goes together as it was intended. Verdict, this Delta drill is an OK machine for the price. It does what it is supposed to do but I am not impressed by the overall attention to detail in fabrication. The variable speed feature is convenient but given the frequent requirement for oiling I don't see a large advantage over the traditional belt and pulley systems. ... Read more

Features

• For use with drill presses only
• 7-piece set contains most common sizes of bits
• Smooth cutting edges for splinter-free drilling
• Drills angled holes and overlapping holes cleanly and easily
• Short pilot point reduces risk of drilling through during stopped cuts

Reviews (1)

worth the money
for the money these bits are a good buy . cut good , last as long as any other brand . they're not as pricey as carbide and won't last as long . but for a home shop they are the best buy you will find . i recommend them highly . ... Read more

Product Description

• Delta Waterfall Series kitchen faucet
• 3-hole widespread installation
• Single lever handle
• Red/blue handle indicators
• 10 7/8" high, 9 1/2" long spout swings 360 degrees
• Matching finish vegetable spray mounts on right or left
• With 1/2" I.P.S. adapters

Features

• Delta Kitchen Faucet 172WHWF

Features

• Clamps materials up to 4" wide
• Quick-release design for faster set ups
• Cast iron body has mounting slots for easy installation
• Jaws are pre-drilled for auxiliary jaw plates

Features

• 180 Grit
• Bulk roll, enough for 14 abrasive changes

Reviews (1)

Get a finer grit like this one
Drum sanders are notorious for leaving "stripes" in the wood at the rougher grits. Get a finer grit like this to smooth the wood more before going to your ROS.

And the bulk quantity is a much better deal than the pre-cut versions. Just cut on the lines and you are ready to install it. ... Read more

Features

• 5 HP, 220-volt, 1 phase induction motor
• Capacity: 20 inches wide by 8-5/8-inch thick
• Feed rate: 20/30 feet per minute
• Two year limited warranty on machines, parts, and accessories"

Features

• Lifetime Warranty--as long as blade is used for its intended purpose
• 60 teeth for crosscutting with a fine finish, carbide-tipped for long lasting sharpness
• Alternate top bevel grind provides a shearing action on both sides of the cut for better results
• 20-degree hook angle for fast cutting
• Fits 10-inch table saws with a 5/8-inch arbor

Features

• Filters particles as small as 1-micron for a cleaner shop environment
• Replaces bottom dust bag on Delta 50-852 and 50-853 dust collectors
• Designed for a custom fit, easy to install
• For best results, use with 50-836 1-micron top bag