Features

• Single blade for straight cutting in harder material
• Full round High Speed Steel blade
• 3-1/8" diameter blade
• Rigid material provides for more durable blade and better cutting ability
• For cutting sheet metal up to 1.0 mm and harder wood, fiberglass and carbon fiber

Reviews (2)

Amazing!
This is the perfect tool for anyone that needs to cut fiberglass. It is indespensable and much more managable than a dremmel or other hand grinder. I use this tool almost daily. The only down side is that this blade is a bit fragile and will break if bent even slightly.

Great Safe Tight Space Cutting Tool
I was told about this tool by a freind when I needed to do some work on the inside of my sailboat. The tool works on the same principle as an orbital sander, only with this cutting blade attached, it will cut just about anything very safely. I have used this blade to cut fiberglass tabs away from the hull without danger of cutting throught the hull and with very little dust. I have also cut the 3/8 plywood that was fiberglassed to the bulkhead. I just took my time and the adjustable depth stop and did not cut through any deeper than necessary. I also trimmed the ends of Stainless steel screws off that are through bolted through the cabin top. I now carry this tool with me anywhere I have a job to do for cutting or sanding. Well worth the money. ... Read more

Features

• 2-pack of sanding pads for Multimaster
• Aluminum backed pad
• Hook and loop allows for grit switching in the middle of a job
• Hook and loop face designed for long life when used properly

Reviews (2)

Add this to your Fein Multi-Master
You've got to have this if you've ordered the Fein MSXE-636-2 Multi-Master Electric Variable Speed Kit - it makes the tool even better.

ease of use
If you are like me and constantly changing sanding grits, the velcro is fantastic. No need to peel of the old one and have to discard it. This allows me to reuse the sandpaper and saves me money especially when I have very small jobs to do. ... Read more

Amazon.com Review

While there are plenty of solid and reliable plunge routers on the market, there are few that work as smoothly and quietly as this model from Fein. Featuring a soft-start motor that eliminates start-up torque and twisting, six speeds, and electronic feedback control, it's capable of producing great results in a wide variety of materials. The trigger is well placed in the grip, so turning the router on and off can be accomplished without trying to hold it with one hand, and the grips are nicely contoured to the hand and a little larger than those of most other routers. While it can be mounted to a table, this router is designed with plunge routing in mind, and the control it offers for freehand work is really unbeatable. Everything about this router is well thought out, from the easy-to-reach placement of the plunge lever and trigger to the precision of the height adjustment. For many people, the reduced noise level and added degree of control may not be worth the bigger price tag, but for more-discriminating tool buyers the Fein is worth the expense. --Brian Trinen ... Read more

Features

• Wide base opening for all bits
• Powerful and strong motor for smooth cuts at any RPM
• Lightweight for easy of use
• 6 speeds to match any bit size with material being cut
• Quick change spindle

Reviews (14)

Simply put, this is the very best.
First let me say that, no other tool in your arsenal will create such enormous beauty as a router.
I usually don't write a review unless I am passionate about something, and this router falls into this category
The thing I love about this router is the way it is made. It just feels right. It is so light and well balanced, powerful and quiet. If I can exaggerate, and only a little, this thing is about as quiet as an electric can opener. The soft start feature is shared among many of the better routers. It is wonderful not having to brace yourself for the kick at start up. Additionally the electronics compensate for resistance by keeping the rotational speed constant. Another advantage to having more than enough horsepower. This unit is light enough 12 lbs to be used as a hand held, yet sturdy enough to be classified as an industrial production router. The plunge mechanism is smooth without snagging on the way down.
Although someone else commented on the locking mechanism, I must say, it is properly designed. Think of riding a bicycle with brakes on the handlebars. When you want to stop, you grab the lever, pulling it toward you by closing your hand. That is the way the Fein works. Any other way you would be using your finger nails to lock the router, thereby having to slightly loosen your grip. Counter intuitive but I guess the other reviewer had grown accustomed to working a lever on a machine, which worked that way. He may have the Porter Cable or Bosch plunge routers, which has a spring built into it thereby locking it automatically when you release the lever. The feeling I get from that is, "I wonder if it is locked to the proper tightness?" I prefer to tighten it myself. The Fein is intuitive and easy to use.

It is important to match the bit speed recommended by the manufacturer. You will get a feel for this. This Fein router has six speeds, which is actually an infinitely variable knob, with six number positions on it, so you can perfectly match the speed to the task.
You also need plunge capabilities for making quick clean mortise and tenon joints. Some routers only plunge to 2 or 2 1/2", this one plunges to 3". This router comes standard with a 1/2" collet, with a 1/4" collet optional. Having a base which will accept 3 1/2" bits is nice, and this router accepts them. I noticed in a follow up edition of Fine Woodworking magazine, that they had a clip about the Fein RT-1800. They were amazed at the specifications they found for the run out. It was off the chart next to the other routers in their previous months router review.
One other thing that I noticed is that this Fein will accept 3 1/2" bits, which are not all that common, but you can not plunge a bit that size into the base. The bottom of the base will accomodate a bit that size, but the casting does not allow you to plunge it. The Bosch 1619EVS 3+ HP plunge does allow you to plunge a 3 1/2" bit into the base. You could argue that the opening is so large on the Bosch, so as to restrict you on stability, in the event you plan on using it for any kind of hand held work. So there you have it, build a small opening on the base, and gain a lot of control over the workpiece, or create a monster opening, capable of large bits, and your workpiece can fall into it. Get the Bosch, (even though it is louder than the Fein) Get the Fein, and get the Makita D-Handle. Each is a blessing for its own purpose. Oh and get a Porter Cable Laminate trim router as well, for those small light jobs. I'm not trying to spend your money, just that each has its own advantages and disadvantages. Too many to write here. The Makita D Handle is on its way, and I will be writing about some of the specifics on that one as compared to the others herein mentioned. Tune in over there soon.
Am I allowed to say that the German engineering on the Fein Rt 1800 is of the best. Simple, and effective. Engineered to simplicity. That is the way this router is made. Strong, simple, effective. If woodworking is your love, then this tool is worthy of your attention. Out of all of my tools, there is none other, that I am as fond of, as this Fein Router. Stay tuned the Makita D handle challenge is coming. Happy woodworking.

Excellent Router!
I spent quite a lot of time researching routers, bought this one (after hemming about the price), and love it! The other routers that I looked at, Porter-Cable and DeWalt, were uncomfortable to control, heavy, or lacked the flexibility that I wanted. I was a little concerned at first of the Fein's size and weight. Once I started using the router, however, I was surprised about how easy to maneuver it is. I use the router on and off the table and find it to have plenty of power and be very quiet.

If you are the kind of person who likes to read the manual cover to cover, don't expect much. This is a "no frills" router - It comes in a cardboard box, and essentially tells you how to turn it on and a couple other tid-bits. I figured out how to lock the power on after monkeying with it for a couple minutes (there's a "toggle" on the switch).

The only gripe that I have is that the mechanism to free-up the plunge feature feels backwards - you have to push it away to release it and it's not on a spring.

You know how it feels to pick up an item and it's clear that the manufacturer spent time thinking about their product? This router is exactly like that. It's well built, and very comfortable to use. I would buy this router again in a second.

The BEST plunge router, hands down.
Turn it on, run it for hours on the router table and shut it down at the end of the day. This is a serious production-quality machine. Go ahead, just TRY to bog it down, nothing phases this brute. Depth djustments are simple and repeatable. The Fein is quiet and powerful, it doesn't scream at deafening pitch like most of the other 3+HP routers out there (a HUGE plus if you have to listen to it all day). Available accessories are pricey, I would have liked to see them included with the standard kit so I have to give this router 4 stars, otherwise it's a dream to use and holds up to the test of time.

Best router so far...
I've owned several routers over the years. The Fein is probably at the top of the heap of 3-1/4 HP routers. It is quiet, well-balanced, and fairly light. I love it's on-off switch--by far the best, and considerably easier to turn on and off than that of DeWalt. So far, I've had no breakdowns (my DeWalt had a cord failure and an on-off switch screw-up). Don't get too carried away by "whisper-quiet"--once the bit hits the wood, all routers are about the same! It's not really 6 speeds; it has a continual speed adjustment, labelled 1-6. Height adjustment is easy and accurate. This router just has a great "feel" to it in terms of low vibration and balance that makes me think it's going to be humming along for a long, long time. My only regret is that I got this router last rather than first.

Fein RT-1800 Router
The stator winding on my Hitachi M12V had opened (burned) after 12 years of service. I thought of buying another M12V having made my own fine adjustment knob and locking device years ago. But, after researching different brands I had decided to buy the Fein and I am very pleased with it. It is a very quiet, smooth, and precise machine. Changing router bits is so easy and quick. When I make an adjustment and lock it down, it stays there! I only item I did not like was the lock-on switch located in the handle. I use the Fein in a router table and very seldom do I use it hand held. So what I did was mount an On/Off switch/receptacle on my router table. I use the table mounted on/off switch to turn the router on & off. When I get ready to remove the router for any reason like bit changing I always unplug the router from the receptacle: Remember "SAFETY FIRST". ... Read more

Features

• 80 grit paper provides fairly aggressive sanding in small areas
• 50 pieces of paper to attach to hook and loop pad on Multimaster
• Fully synthetic-resin bonded
• For aggressive sanding applications

Features

• Great for smaller cuts for modeling and trim work
• Set of 4 blades for detailed plunge cut applications
• One 3/8" and one 3/4" blade for wood and other soft materials
• One 3/8" and one 3/4" blade for metal and other harder materials
• Includes adapter for attaching blades to Multimaster tool

Reviews (2)

Wow is it tiny
I know they tell you in the description that it is 3/8" and 3/4" blades but they come in this little tiny pouch. Save these for your super small jobs. Combining the small blades with the Fein Multimasters variable speed, and you have the capability of doing some pretty "fine" work. Great for the boat in a jar project, or anything else in wood or metal, that requires a small cut.

Fine Fein accessory
What more do I need to say? This is a fine FEIN accessory. No more needs to be said! ... Read more

Features

• 120 grit paper provides detailed sanding in small areas
• 50 pieces of paper to attach to hook and loop pad on Multimaster
• Fully synthetic-resin bonded
• For detailed sanding applications

Features

• Includes turn screw and flange
• Use with HEPA and 1 micron filters
• For the Fein 9-55-13 vacuum

Reviews (1)

Necessary part for the Fein Turbo vacuums
If you're doing woodworking or sanding, you need the HEPA filter (see my review of that part). To install the HEPA filter, you need this part.

It came with no instructions but was not hard to figure out. Just takes a little force to get the screw into the hole in the flange (from the cup side). The flange fits into one end of the HEPA filter, and the screw locks the filter/flange/screw "assembly" in place. ... Read more

Product Description

FEIN HandyMaster Drill/Drivers are well balanced and POWERFUL. The ABS 18 NiCd or NiMh soft grip handle and lightweight drill drivers enables you to concentrate on your work with ease. The ABS 18 has 1/2 single sleeve chuck, 531 inch pounds of torque and only weighs 6.4 pounds. The ABS 18 no load speed 0-400 / 0-1400 rpm in addition to being reversible. HandyMaster drill/drivers are complete with two batteries and one quick charger. ... Read more

Features

• Delivery with Quick Charger ¿ 20 minute Recharge
• ExcellentBalance with Soft Grip
• ABS 18has 531 inch pounds of Torque
• 9 Position Adjustable Clutch Torque Control
• Keyless Single Sleeve Chuck for one-handed bit changes

Features

• Perforated paper for use with dust extractor kit allows for cleaner, faster work
• 80 grit paper provides fairly aggressive sanding in small areas
• 50 pieces of paper to attach to hook and loop pad on Multimaster
• Fully synthetic-resin bonded
• For aggressive sanding applications

Features

• Single blade for straight cutting in harder material
• Full round, high-speed steel blade
• 2-1/2" diameter blade
• Rigid material provides for more durable blade and better cutting ability
• For cutting sheet metal up to 1.0 mm and harder wood, fiberglass and carbon fiber

Reviews (1)

excellent tough saw
As a building contractor, I have used this blade in my Fein sander for everything from flush-cutting door jambs & casing when installing t&g flooring to cutting back drywall-wrapped window sills when replacing windows. Its thin kerf allows it to do a clean job where other tools can't go. The single blade that came with the sander kit has seen a lot of use but is still sharp. ... Read more

Product Description

3 - Pack of dust bags for 9-77-25 Turbo III & 9-88-35 Turbo IV Vacuum ... Read more

Features

• 4 - Pack of dust bags for 9-77-25 Turbo III & 9-88-35 Turbo IV Vacuum
• Designed for use with a 1 Micron or HEPA filter
• Collects larger particles for two-stage dust collection
• Disposable

Features

• Step adaptor for 1 ¼" hose
• Allows vacuum hose to adapt to smaller dust ports on tools from different manufacturers
• Reduction from 1 ¼" to 1"
• Rubber can be cut for correct step use on different tools

Features

• Designed for smaller plunge cutting applications
• 3/4" High speed steel blade
• Fits into mini E-cut adapter for Multimaster
• Perfect for modeling and trim work
• Smaller tooth pattern provides for longer blade life

Features

• Perforated paper for use with dust extractor kit allows for cleaner, faster work
• 120 grit paper provides detailed sanding in small areas
• 50 pieces of paper to attach to hook and loop pad on Multimaster
• Fully synthetic-resin bonded
• For detailed sanding applications

Reviews (1)

Fein is tops
Let's face it, this paper isn't cheap. But it is very well made. The advantage to the Fein paper is that the backing is made so well, that you do not wind up with buggered edges, which wastes the backing pad. Result: Clean sanding, that maintains a crisp edge for getting into tight places. Isn't that what the sander is for? All grits work well. Highly recommended. ... Read more

Features

• Accessory for Multimaster
• To be used with 2-1/2" or 3-1/8" blades
• Limits depth of cut with Multimaster blades
• Not to be used with offset blades or E-Cut Blades

Product Description

FEIN HandyMaster Drill/Drivers are well balanced and POWERFUL. The ABS 12 NiCd or NiMh soft grip handle and lightweight drill drivers enables you to concentrate on your work with ease. The ABS 12 has 1/2 single sleeve chuck, 274 inch pounds of torque and only weighs 4.4 pounds. The ABS 12 no load speed 0-600 / 0-1400 rpm in addition to being reversible. HandyMaster drill/drivers are complete with two batteries and one quick charger. ... Read more

Features

• Delivery with Quick Charger ¿ 20 minute Recharge
• ExcellentBalance with Soft Grip
• ABS 12has 274 inch pounds of Torque
• 9 Position Adjustable Clutch Torque Control
• Keyless Single Sleeve Chuck for one-handed bit changes

Features

• Flush cut design allows for completely perpendicular cuts to flooring in tight areas
• Aggressive 2-1/2" saw blade for Multimaster tool
• Perfect for aggressive flush cutting applications
• Japanese Pull saw tooth pattern makes rapid plunge cuts in wood and softer material
• Great for doorjambs, baseboards, toe kicks, and flooring work

Features

• Long lasting silicone carbide cutting surface
• Removes grout between tiled surfaces
• No danger of damaging adjoining tile
• Designed for standard grout lines
• Segmentation allows for single tile removal as well as grout removal against a wall without damaging the wall

Reviews (1)

Grout Removal Blade
This blade is a must if grout is to be removed where a bad ceramic tile is to be replaced. First, use this blade to cut away the grout around the tile piece. Second, use a hammer drill or hammer and chisel to break the tile, working at the center and moving to the edges. Third, cleanup the mastic/thinset using any or all of these tools. ... Read more

Features

• Fully synthetic-resin bonded
• 100 grit
• For most applications
• PSA 50 pack
• No dust pickup