Features

• Can be re-sharpened for longer blade life
• Rigid scraper blade for Multimaster tool
• Can be used in place of a putty knife
• Great for removing paint from harder surfaces
• Works well on linoleum flooring and carpeting

Features

• Fully synthetic-resin bonded
• 40 grit
• PSA 50-pACk
• No dust pickup
• For most applications

Features

• 5 pack of pointed cutter blades for Fein caulking cutter
• Removes flexible caulking from expansion joints
• Hexagonal head provides for secure attachment to the tool

Features

• Self-start lock
• Instantaneous electronic feedback system
• Unique planetary gearing system
• Eliminates going over the same area
• Use on stainless steel, cultured marble, etc

Features

• Makes smooth, fast cuts in stubborn material
• Cutting blade for Multimaster tool
• Perfect for cutting linoleum flooring
• Cuts through carpeting, plastic, leather, and foam rubber with ease
• Use in place of a razorblade for cutting applications

Features

• Makes straight cutting more effective and simpler
• Router guide for RT 1800 router
• Solid, durable construction
• Simply attaches to router base plate
• Fine adjustment knob on guide for simple minor adjustment

Product Description

FEIN HandyMaster Drill/Drivers are well balanced and POWERFUL. The ABS 14 NiCd or NiMh soft grip handle and lightweight drill drivers enables you to concentrate on your work with ease. The ABS 14 has 1/2 single sleeve chuck, 327 inch pounds of torque and only weighs 4.6 pounds. The ABS 14 no load speed 0-400 / 0-1400 rpm in addition to being reversible. HandyMaster drill/drivers are complete with two batteries and one quick charger. ... Read more

Features

• Delivery with Quick Charger ¿ 20 minute Recharge
• ExcellentBalance with Soft Grip
• ABS 14has 327 inch pounds of Torque
• 9 Position Adjustable Clutch Torque Control
• Keyless Single Sleeve Chuck for one-handed bit changes

Features

• Includes one felt polishing pad, one carbide rasp, one 133 E-cut blade, one grout blade, one convex blade, and one mini E-cut set
• Sturdy metal case for Multimaster tool
• Rigid lining provides more space for accessories
• More space for the tool and its cord than the basic plastic carrying case
• Movable plastic inserts allow for accessory organization

Features

• Fits in smaller spaces where standard pad doesn¿t fit
• 60 grit paper provides fairly aggressive sanding in small areas
• 50 pieces of paper to attach to finger pad on Multimaster
• Fully synthetic-resin bonded
• For aggressive sanding applications

Features

• Single dust bag for 9-11-20 Mini-turbo Vacuum
• Designed for use with a 1 Micron or HEPA filter
• Collects larger particles for two-stage dust collection
• Disposable

Features

• Built in dust collection hookup
• Instantaneous electronic feedback system maintains constant RPM
• Covers 78% more surface area than a standard 6 in. sander
• 1200 watt, 7000 no load RPM
• Hook & loop with dust extraction

Features

• Designed for smaller plunge cutting applications
• 3/4" Wood cutting blade
• Fits into mini E-cut adapter for Multimaster
• Perfect for modeling and trim work
• Larger tooth pattern provides for more aggressive cutting

Features

• Fits in smaller spaces where standard pad doesn¿t fit
• 260 grit paper provides aggressive sanding in small areas
• 50 pieces of paper to attach to finger pad on Multimaster
• Fully synthetic-resin bonded
• For aggressive sanding applications

Features

• Simple to install on router
• Larger fine height adjustment knob for the RT 1800 router
• Mounts onto the router in place of small knob that comes standard
• Makes under table fine height adjustment much simpler
• Large 4-pronged knob makes fine height adjustment easier

Reviews (1)

Pass on this accessory!
If you use your router under a table a lot, it would be great to be able to adjust the router with a suitable knob unless you enjoy fumbling around for a small round knob with little knurling to get a good grip. For this reason, I bought this height adjustment knob and it serves the purpose.
My disappointment started after removing the smaller plastic knob's set screw. I wasn't sure how to remove the knob. Was it threaded or a friction fit? I had no idea (no instructions come with it) So I took a chance and stood the router upside down and began to gently tap with a small tack hammer just under the knob and fortunately it fell off.
Disappointment No. 2: After installing the New knob, I replaced the set screw which threads into the center shaft but does not seat. The holes in both the shaft and the knob go through both sides!! Maybe a roll pin would have been more appropriate here. Furthermore, there is so much play between the shaft and the knob collar that it rocks back and forth slightly when the router is plunged and locked. You would not expect this from a German quality product!!
This router is too good to let this happen. C'mon guys! ... Read more

Features

• Fully synthetic-resin bonded
• 150 grit
• PSA 50-pack
• No dust extraction
• For most applications

Features

• 1/4'" collet for the Fein RT 1800 router
• One-piece multi-slit design for firm grip
• Fits inside collet holder that comes with router for using ¼" router bits
• Solid construction provides for long collet life

Reviews (2)

Important Accessory for the Fein RT-1800
Purchasing this 1/4" collet will increase the usability of your Fein RT-1800 router. Seems like they should include it with the purchase of the router. Buying the 1/4" collet, is almost a neccessity because of the popularity of the 1/4" bits. In addition to that, you may consider the 8mm collet as well, which is not so common.
An interesting note is that the international standard for the 1/4" equivalent is 8mm, which is a 56% larger shaft, but still is small enough to fit into the smaller template sizes. So you get a lot more strength, which means less vibration. Is it possible that the disdain for the 1/4" standard, drove this W. German manufacturer into offering the 1/4" collet as an option? The 8mm collet is available from Fein Power Tools in Pittsburgh PA> Part number 0000433085, or you can check with Amazon.com in the Tool Crib at 1-800-635-5140.
I first learned of the 8mm standard when I bought the Leigh Dovetail Jig. Leigh manufacturing offers a 15 piece bit set with 1/2" and 8mm bits, in addition to the other set with 1/2" and 1/4" bits. They find superior results with the 8mm's, so they make special mention of offering them. I bought the 8s, and they are substantially larger. I plan on acquiring more 8mm bit sets in the future, in addition to the 1/4"s that I now have.
This 1/4" collet is substantially made, just like the rest of the Fein line. The RT-1800 is unique in that it has linear bearings instead of ball bearings. Consquently, Fine Woodworking magazine, in a follow up article to their router run off, stated that the new Fein Rt-1800, had such a little bit of run out, that it was off the chart next to every other router they tested. The long shaft-surface area of a linear bearing, holds the shaft in line a lot greater than the microscopic surface of the edge of a ball bearing. Some resort to dual ball bearings to improve on that. Back to the collet.
It doesn't come with the locking nut. Switching the nut into the collet is easy. It snaps in and out of the nut rather easily. The Fein collets really hold onto the bits very well. It is like the rest of the Fein line, it costs more, but you get more. The engineering is second to none.

Perfect!
If you own Fein router, you've seen its 1/2" collet. Fein's 1/4" collet is its twin sister with a little bit smaller hole. It's very deep (30 mm, approx. 1-1/4"), 8-prong, precise machined self-ejecting collet. All my small 1/4" shank bits fit the collet perfectly and get out easily. Collet is perfectly centered (I couldn't measure the runout with 0.02mm=0.001" calipers, it's less than that), it holds the bit very tight, so there is no vibration, slippage, or anything else that can go wrong.

Without hesitation I can say that Fein collets are way better than dozens of other collets I've seen. No question about it.

The only complain that I have is the absence of additional collet nut -- I wish it supplied as an collet/nut assembly: despite it's relatively easy to remove collet from the nut (thin 1/2" goes out easily, thick 1/4" with some effort, both go in easily), I don't like the the process -- the nut has a groove with a sharp edge used to keep the collet in, and moving collets in and out on regular basis will ruin the nut (or collet) sooner or later. Besides that, the need to bend collet prongs slightly in order to release it from the nut does not increase collet life as well. Finally, it takes time. When I get bored, I will buy additional nut for 1/4" collet. ... Read more

Features

• Fits in smaller spaces where standard pad doesn¿t fit
• 40 grit paper provides aggressive sanding in small areas
• 50 pieces of paper to attach to finger pad on Multimaster
• Fully synthetic-resin bonded
• For aggressive sanding applications

Features

• Designed for smaller plunge cutting applications
• 3/8" High speed steel blade
• Fits into mini E-cut adapter for Multimaster
• Perfect for modeling and trim work
• Smaller tooth pattern provides for longer blade life

Features

• Fully synthetic-resin bonded
• 220 grit
• PSA 50-pack
• No dust extraction
• For most applications

Features

• 19 3/4" hacksaw blade for Fein hacksaws
• High speed steel blade for cutting non-ferrous metal and steel
• Maximum Cut diameter 13 3/4"
• 14 Teeth per inch