Product Description

Diablo 7-1/4-inch, 24-tooth framing saw blade ... Read more

Features

• Ideal job site blade
• Super thin kerf uses less power
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Features

• Thin kerf design to increase machine performance
• Laser cut bodies for accurate cuts
• Freud micrograin carbide for long life
• Anti-vibration vents for stability
• Perma-shield coating to resist heat

Features

• Special Triple Chip Tooth Design Produces Extremely Smooth, True Surfaces For Gluing/Finish Work
• No Sanding Or Jointing Required After The Cut!
• New Laser-Cut Anti-Vibration Slots Improve Finish And Ability To Stay Sharp.
• Features Perma-Shield Coating
• Ideal For Materials 1/8" To 1" Thick

Features

• Clean, fast, glue line rip cuts with less drain on your saw and less material waste.
• MicroGrain carbide teeth slice quickly and easily through hard and soft wood. from 3/4 to 2-3/4
• Thick MicroGrain carbide tips. Laser cut blade bodies and expansion slots. Kickback reducing design
• Perma-SHIELD coating guarantees less working friction and resin adhesion
• 5/8" Bore, .094 Kerf, .071 Plate, 2 Degree Hook Angel

Features

• 10 inch 50TPI, 5/8 inch arbor
• Combination
• Expansion slots cut vibration
• Anti-kickback
• Thin kerf, flat tooth, long life

Reviews (8)

Hokey smokes!
I have read a lot of reviews about how great such-and-such a blade is compared to some other blade. I figured that while most of what was written was probably true, a good chunk of it was probably the same sort of bunk that you hear from folks who consider themselves audiophiles - all talk and no substance mixed in with a lot of pseudoscience. In other words, Bunk with a capital B.

Well, I needed to get a blade for an old saw I am restoring, so I bought one of the TK906 blades. Everything good you hear about the blade is 100% true!

I am pretty new to woodworking, so still have the blades that came with the tools. I am used to having to wear hearing protection when sawing. I was completely amazed when I did a test cut with the TK906 - instead of a very loud "skeeraach!" sound that I am used to, I heard "bzzzzzzzzzzzzt". The blasted motor and arbor turning on the saw makes more noise than the blade cutting!

Once I inspected the cut that's what really sold me. Granted, 99% of the cut is having the blade aligned properly (and I go for a perfect alignment), but the cut I got was ridiculous - perfectly flat, smooth, no tear out. Close inspection showed very little in the way of teeth marks - they are there, but are miniscule.

I know there are some more expensive blades out on the market, but I can't see how they would be worth the added expense. Maybe they are, but it is awfuly hard to improve on cuts like I am getting.

Good workhorse.
Freud has good products made from good materials. Keep it clean and this blade will work hard for you.

Freud TK906
I've used this blade on an underpowered older table saw for a year now, mostly on oak and ash. It is better than any other blade I've tried (and has lasted longer). No noticeable vibration, less stock removal, and good smooth cuts on all types of stock and thicknesses. It even cuts 8/4 unfinished oak stock with little problem. From the above, you can gather that I also use it as an all-purpose blade. Highly recommended for the price.

not what i expected from freud.
i always buy freud router bits i loved the very high quality of them. i figured that their saw blades were of the same quality. i put this blade on and it vibrated more then my stock sears blade. it also made my saw bog down more then my sears blade that was dull. the cut was no beter either. maybe frued makes good blades but this is not one of them. i guess you get what you pay for.

Great Blade
This is a great blade. I have a 10" "underpowered" table saw and was having problems cutting "thick" stock (3/4" & 1"). If you didn't get the feed rate just exactly right it would bind or burn the material. This blade has changed all that. It cuts even 5/4" oak like butter. Chip out, even on Melamine, is almost non-existant. I bought this blade on the reccomendation of my brother who is a finish carpenter and custom cabinet maker. He actually recommended the teflon coated version, but I couldn't afford that one at this time. I also own the Freud 6" dado set and it is an outstanding tool. From now on I'm going to stick to Freud products and stop wasting my time and money. ... Read more

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Reviews (1)

Accurate and true
The 99-270 bit set I purchased took a little getting used to. When I first opened the package and studied the profiles, there was no way these bits would match. Or so I thought. After some practice cuts and a little trial and error I was on my way. The bits are of course Freud quality all the way. Mine unfortunately were assembled incorrectly from the factory. (4 Stars) One of the cutting heads on one of the bits was installed up side down. This made for an interesting first cut. After correcting the assembly error, I had no problem making all the parts for a divided light window. You will however, have to use mortises to assemble your project. Overall these are a great addition to my Freud collection. Solid as expected! ... Read more

Features

• Impervious to chemical attack
• 1/2-inch diameter, 1 1/2-inch cut depth, 1/2-inch shank
• Ground carbide with titanium for long life
• Anti-kickback
• Computer balanced for vibration free operation speeds over 22,000 RPM

Features

• Thin kerf design to increase machine performance
• Laser cut bodies for accurate cuts
• Freud micrograin carbide for long life
• Anti-vibration vents for stability
• Perma-shield coating to resist heat

Product Description

These blades have four alternate top bevel teeth and a square raker tooth per section to let you cut hardwoods, softwoods and get a smooth and clean edge. Also comes with a, Free 2 oz. Gorilla Glue, -Limit 1 bottle per order. $5.00 retail value. ... Read more

Features

• 10 inch, 50-tooth, 5/8-inch arbor
• Perfect balance between ripping & crosscutting
• Large gullets and flat top teeth for ripping
• ATB & R tooth design for combination cutting
• Free Gorilla Glue, 2 oz. -Limit 1 bottle per order. $5.00 retail value.

Features

• Covered by Freud's limited lifetime warranty
• For precise saw alignment
• Use your saw as a disk sander
• Precision machined for balance and flatness
• Premium quality steel

Reviews (1)

A fine helpful item to align your table saw with...
I have not used this as a sanding disk yet, but it has been a great help in keeping my Delta table saw and Unifence in fine alignment -- much easier than trying to align your table saw with a saw blade installed. ... Read more

Features

• Thin kerf design to increase machine performance
• Laser cut bodies for accurate cuts
• Freud micrograin carbide for long life
• Anti-vibration vents for stability
• Perma-shield coating to resist heat

Features

• Ideal for 1/4" to 3/4" plywood.
• All bits have 1/4" shanks.
• Routs perfectly fitted grooves and dadoes.
• For use on hand-held and table-mounted portable routers.
• Cuts all composition materials, plywood, hardwood and softwood; and includes wooden storage box.

Features

• Kickback reducing design for safe bit use
• Bit design makes glass doors look as good from the back as the front
• Micro grain carbide for razor sharp cuts
• Non-stick Perma-SHIELD coating reduces gumming, rusting and corrosion
• Precision computer balanced bits for extreme accuracy

Reviews (1)

Frustration
Freud 99-280 Recoverable Bead Glass Door Bit Set, do a beautiful job once you have zeroed in on the right settings. However doing that is a VERY difficult job, and is really frustrating. The problem is exacerbated by the fact that Freud mysteriously provides no instructions , diagrams or even any recommendations for their use. I have tons of Freud blades and router bits, and my biggest complaint is they almost never have any instructions. The biggest problem with this bit set is when you remove the glass bead. If you are of a 32nd of an inch the tenons will be either to short or to long, and in the earlier case there is no way to correct it. I will still buy Freud products, but I wish they would spend a few bucks and create an instruction manual. Many of their competitors have already done so. ... Read more

Features

• Wood case
• Five piece cabinet door set
• 1/2-inch shank
• Use withtable mounted router
• Includes 99-512 panel bit

Reviews (1)

Great bits!
I purchased this set and they cut perfectly. Every router bit I own is made by freud. There bits cut very smoothly and they are well built. This set includes 5 bits, a matched set of rail and style bits, a glue joint bit, a raised panel bit (99-512 instead of the one that reguraly comes with the set)Bits cut so smooth that you hardly have to sand. have used other name brand bits and the freud outperform the others 10 to 1. Great bits and very well made. ... Read more

Features

• 7-1/4-inch 24-tooth, 5/8-inch & diamond arbor
• Excellent for framing
• Expansion slots cut vibration
• Anti-kickback
• Thin kerf, flat tooth, long life

Reviews (1)

Freud blades
I am a building contractor for over 20 years, and I've been looking for a quality blade that does not burnout or warp so quickly. So I purchased a few of these Freud blades, and once again I have been let down. My company purchases over 30,000 blades a year, and we have yet to find a blade that gives us the durability, consistency and reliability that a 200 homes per year builder demands. The only blades that have come close is the Oldham blades, but they still need some fine tuning. Overall, builders need a smoother blade that does not heat up as fast. All saw blade manufacturers try to coat the sides of blades in some form or another. All the coatings fly right off within the first 2 minutes of cutting. Does anyone manufacture a smooth blade. If so please contact me. I will purchase volume (as I'm sure any contractor would do with such a product) ... Read more

Features

• Performs like a stack dado - only better
• Shims replaced by patented diameter system
• Maximum 29/32 inch cut width
• Each click adjusts blade .004 inch
• Carbide

Features

• Precision machined for best results
• Premium high speed steel
• Covered by Freud's limited lifetime warranty

Product Description

The 10" LU97R010 Perma-SHIELD coated blade has 80 carbide teeth in a triple chip grind (TCG) tooth design. Each TCG tooth is designed with a negative hook angle for easy feeding and fast cutting. The Sub MicroGrain Titanium Carbide Blend tips are an exclu ... Read more

Features

• Non-stick Perma-SHIELD coating reduces gumming, rusting and corrosion
• Micro grain carbide for razor sharp cuts
• Free Gorilla Glue, 4 oz. -Limit 1 bottle per order. $8.00 retail value.
• Triple chip tooth design for chip free cuts
• Laser cut stabiliz