Product Description

Chamfer bits will form a uniform bevel on the edge of the work piece to add character while keeping crisp, geometric lines. Chamfer size is adjusted by changing the height of the bit. Covered by Freud's Limited Lifetime Warranty. ... Read more

Features

• Thick Micrograin Carbide Tips
• Kickback Reducing Design
• Individually Computer Balanced
• Precision Ground For The Smoothest Cuts
• Covered by Freud's Limited Lifetime Warranty

Features

• Precision machined for best results
• Premium high speed steel
• Covered by Freud's limited lifetime warranty

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Features

• Thin kerf uses less power
• Kickback reducing design
• Laser cut blade bodies and expansion slots
• Covered by Freud's limited lifetime warranty

Features

• Perma-shield coating to resist heat
• Freud micrograin carbide for long life
• Anti-kickback design for safety
• Shear angle design produces superior finish
• Multi-axis grinding for burn free cuts

Features

• Precision machined for best results
• Premium high speed steel
• Covered by Freud's limited lifetime warranty

Product Description

The highest quality cabinets deserve the highest quality bits. When it comes time to trim your cabinet laminate these are the bits you can rely on for a smooth, burn free cut. However, these bits can be used for pattern work as well. Two flute bits provid ... Read more

Features

• Thick Micrograin Carbide Tips
• Kickback Reducing Design
• Individually Computer Balanced
• Precision Ground For The Smoothest Cuts
• Covered by Freud's Limited Lifetime Warranty

Features

• Thin kerf uses less power
• Kickback reducing design
• Laser cut blade bodies and expansion slots
• Covered by Freud's limited lifetime warranty

Features

• Thin kerf uses less power
• Kickback reducing design
• Laser cut blade bodies and expansion slots
• Covered by Freud's limited lifetime warranty

Features

• Thin kerf design to increase machine performance
• Laser cut bodies for accurate cuts
• Freud micrograin carbide for long life
• Anti-vibration vents for stability
• Perma-shield coating to resist heat

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Thick micrograin carbide tips
• Right hand rotation

Product Description

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade leaves a smooth finish when ripping and crosscutting 1x stock, decking, fencing, and plywood. This is the ideal plywood blade for your circular saw. ... Read more

Features

• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand keeping the cut true and straight
• Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact
• Laser cut arbor for accurate blade rotation reducing vibration and premature wear

Features

• Flat nozzle
• Use for biscuit joints
• Keeps glue in tip from drying

Reviews (2)

Don't waste your money on this one.
I purchased one of these a few months ago after using my buddies Lamello glue system. I thought it would work the same. I wasted .... I chucked it and bought the lamello. It was $20 more expensive but there's a big deffernce. Don't forget the disposable brushes.

Few benefits for home/shop wood worker
I receieved one of these biscuit shaped glue bottles 9 years ago, with my biscuit joiner, and used it religiously -- at first. Over the years, and several thousand biscuits later, I find laying down a thin stream of glue followed by brushing the glue to a uniform thickness on the board and biscuit surface produces a much stronger joint. Investing the 19.95+ in bulk throw-a-way applicator brushes is a better use of the money. ... Read more

Features

• 7-1/4-inch, 40-tooth, 5/8-inch & diamond arbor
• Excellent for framing
• Expansion slots cut vibration
• Anti-kickback
• Thin kerf, flat tooth, long life

Reviews (7)

Like Butter!
If I've ever had proof that spending a few more $ for quality is worth it, this is it. Bought for project calling for 4 sheets of 3/4 plywood. Am using Asian Birch plywood. Almost all crosscutting being done with Milwaukee circ saw and now this blade. Wow! The saw glides (I mean realy glides) through the cut and with no splintering! I wish I could give more than 5 stars.

Great Blade!
This blade is excellent! Very smooth cuts on birch cabinet grade plywood.

Great Blade for Home Trim Projects!
Why haven't I heard of Frued Blades before. This is the best trim blade I have ever purchased. I cut the bottom off all my doors (26 in all), never nicked a single door. Can't wait until my next trim project!

Shrapnel maker
I bought this blade to upgrade the standard blade that came with my 7 1/2" miter saw that I bought to carry around to smaller jobs. BIG mistake.

Don't know why but this blade will not cut anything without kicking back. It will even take chunks out of 2x pine. Don't even try it on hardwood or cabinet moulding unless you've got a suit of armor on.

It's not the saw alignment. It's dead on. And the saw works fine with the original blade and it even works better than this with some of my worn out framing blades from my circular saws.

Saw in another review where another user had this same problem with another Freud blade. This is only the second Freud I've purchased. I bought one for my 10" Radial Arm Saw thinking it might make it safer to rip with with the anti-kickback feature. WRONG ! ! ! The kickback I got with this blade dang near destroyed my guards and probably would have killed me if the guards hadn't been up to snuff.

I'm beginning to think that the Freud anti-kickback "feature" is nothing but a dangerous sales gimmick. And I definitely won't be buying any more Freud blades in the near future. This one's going back to where I got it, too.

What a difference a blade can make!
When I put this blade on my old skil saw, I thought for sure someone had switched saws on me. If your skil saw is giving you any difficulty at all, try switching to this blade and see how it should be done! I've been cutting some 1/4" oak finish beaded paneling and I don't even have to turn it face down. My old saw blade would have chipped and torn out much of the oak finish if I tried to saw it face up. Not this blade. I rubbed the bottom of the saw with wax paper and away I went. Not a mark to be seen. Great blade! ... Read more