Features

• 25ft hi-flex hose stays flexible - will not kink
• Quietest, most powerful, portable, professional 4-stage system
• Fuji XT model non-bleed spraygun
• Stainless steel fluid components
• Insulated stay-cool handle

Reviews (4)

Overall.....impressive
Pluses:

1. Quiet operation - it sounds like a small vacuum cleaner

2. High quality parts - nothing cheap/flimsy here

3. Great quality of finish - consistent quality with paint and
laquers.

Minuses

1. VERY stiff hose - it induces fatigue after a short while which
becomes a bit of a distraction. I plan on changing mine soon

2. Expensive - I got what I paid for so it's not truly a
complaint

Overall I would give this product a 4.5 rating if I could. I'm very satisfied with this product

A great product and Excellent service
Whatever happened to my first review of this product? I can not find it anywhere and I wanted to spread the message about Fuji very much!

I bought a Fuji Q4 about 3 weeks ago and after having waited for long because of a delay in manufacturing due to the release of the new XT Non Bleeder type gun that comes standard with all new Fuji Q3 and Q4 systems.

I opted for the Q4 because for a relatively small difference in price you simply get the most powerful turbine in the market. It is a 4 stage turbine made right here in America. Fuji manages to put this monster in a very steardy black metal case and the system is claimed to be 50% quieter than the competition. Comparing it to a Turbinare unit I was thinking to buy I totally agree with Fuji's claims.

The unit came in a steardy box but to my dismay the plastic fitting that connects the hose to the turbine was broken. In addition to this, the 6 foot Flex hose I had ordered to come with my unit did not show up either.

A simple call to Fuji and a couple of days later I received a box with the Flex hose, a new plastic fitting and a quick coupling compliments of the company. I was also informed that
I would be receiving a new metal fitting as soon as they are available.

I highly recommend any new buyer to get this Flex hose as it really makes spraying a pleasure w/o the burden of the big rubber hose that comes standard with the unit. By the way, my unit also came with the small plastic cups I bought as an additional option and a pack of spares like cup seals and additional strainers.

I used my Fuji to spray 26 restaurant chairs for a friend who is openign up a new restaurant and the unit performed much better than I had anticipated. That time I used the plastic cups only because I had to spray between chair legs and I needed the smaller size of the spray sytem. The finish was as impecable as I ever had using a spray system and with an ease of conntrol I never felt using my compressor powered NON HVLP sprayer. It is such a different experience to have your paint go where you itnend it and STAY there instrad of the mess that a high pressure sustem creates. After spraying the 26 chairs I pretyt much walked away from the job with no paint stuck on me or my clothing.

The next day I had to spray some booths for the same friend and I tried to use the metal cup that comes with the system. Unfortunately, I could not make the gun achieve an good seal and since it is pressurized the paint was oozing out from it. I went back to the plastic cups and finished the job w/o a problem.

Having contacted Fuji again I was told they will be sending me a newer make of a cup and hopefully this problem will also be solved. Please note that since the XT gun and cup assembly is new for Fuji and I guess some problems had to be anticipated. The point here is that the manufacurer is simply AMAZING in responding to comments and lightning fast in taking care of any problems you may have. You get to talk to Paul, the owner himself (not some clerk that could not give a darn about anything) and this guy even responds messages on weekends!

I give the Fuji Q4 a round 5 star for performance even with the few mishaps I had with it. It is super quiet, super powerful, super performing and it is backed up by what I feel is the best customer service I have ever encountered in my 15 years of buying wood working equipment from various big name manufacturers like Delta, Powermatic, Bosch etc. These guys could learn something about customer service from Fuji.

I give Fuji a 4 star for quality control but again, the outstanding service they offer prety much decides it for me: Fuji is an absolute winner! DO NOT buy another HVLP spray system until you try a Fuji first. Highly recommended.

Look no further.......
The Fuji Q4 Pro is QUALITY, top to bottom, A to Z. Unbelievably quiet, VIBRATION FREE, (becoming a rarity in electric motors because apparently no one cares about bearing clearances or endplay) and EASILY powerful enough to spray any finish you want. (the one exception being polyester, i.e. "grand piano" coatings which need a high pressure, (and high overspray) cup gun.)
Fuji industrial is a no-nonsense company. If you call for support, parts, etc., the president and CEO of the company answers the phone himself. No waiting on hold, elevator music and the like. He seeks absolute customer satisfaction, no middlemen and no confusion.
American manufacters should take note of the lack of corporate wigs, board of chairmen and such with their multi-million dollar salaries for doing basically nothing for their company. What suffers naturally is the end product resulting in yet ANOTHER inferior quality, poorly designed domestic product.

And, despite the name "Fuji", the company is based in Ontario and uses over 90% North American content.

At least here, you are paying for PRODUCT, not some 7.5 million a year PR figure while the engineers don't get paid enough to put out a continually improving product.

You will get more than your money's worth with the Fuji. The gun itself is worth more than many complete systems. And as stated, the Q4 is "THE MOST POWERFUL AND QUIETEST SYSTEM ON THE MARKET."

So, if, you want the most from your dollar, as do I, you won't be disappointed here.

Great sprayer, I am very pleased
I have had this unit about 10 months now and I am very happy with it. My goal, in general, was to get a sprayer with the following features/functionality:

-spray fine finishes such as lacquer and water borne finishes
-also spray thin stains as well as occasional latex and oil-based paints
-variable air pressure for more control
-spend less than $1,000

This unit has satisfied those goals very well. The variable air control is really a must, in my opinion, otherwise I cannot adequately control the atomization. This air control works very well on this unit. It does not vary the motor speed, but varies the flow through the hose with a convenient control located at the gun handle - you can vary the flow as you work and fine tune it without having to run back to the compressor unit to make adjustments. I just turn the unit on and then make all the adjustments at the gun.

This unit sprays everything have tried very well: thinned lacquer, straight stains and dyes, latex paint (with Flotrol), and slightly thinned oil base paint. The finishes are extremely smooth.

Once I have the air and fluid controls set for a given project, the amount of overspray is really remarkably small. Although it is possible to create a lot of overspray, that usually means the air control is set to high.

The unit is very easy to clean - usually I just run solvent through the gun after every coat. Then thoroughly clean the needle and nozzle after the project.

A bonus for me is the sound level of the unit - it is really very low - it is like a mid range "whoosh" . Definitely not a loud unit at all. I find that once I have everything adjusted and start spraying, I do not even pay attention to the sound of the unit at all. I understand that some other brands have very irritating noise levels. Not so here.

I also appreciate the manufacturer's after sale support. Very helpful. I also purchased (from Fuji direct) the 6 foot whip hose and the set of small plastic cups for small jobs. The whip hose is very light and I find it very helpful in maneuvering in my small spray area.

I have been happy with the needle/nozzle combination which came with the unit, although my guess for the majority of my lacquer work, the #3 nozzle would work fine also. ... Read more

Features

• 25ft hi-flex hose stays flexible - will not kink
• A powerful, portable, professional 3-stage system
• Fuji XT model non-bleed spraygun
• Stainless steel fluid components
• Insulated stay-cool handle

Reviews (1)

So happy I now wish I had bought Fuji's top of the line
This HVLP is like my new best friend. This morning I sprayed 1/2 gallon of paint onto 25 kitchen cabinet doors (one side), in 2 hours including clean up. The finish is impeccable.

My only regret is that I didn't spend the extra $200 and buy the four turbine unit. A friend of mine recommended Fuji because he's been painting professionally with his for the last 13 years--no problems. His is the three turbine model, so I figured I didn't need anything more.

Only one complication: thinning. In order to shoot latex (I use Benjamin Moore Iron Clad Latex Enamel) you have to thin it. I have not been able to eliminate orange-peel with anything less than 20% thinning. And I'm not sure if this jeopardizes the integrity of the paint.

But otherwise, this sprayer will save you so much time it is ridiculous. Think what you can paint--cabinets, furniture, base board, molding, the cat.

The unit is quiet, and seems to be quality. It uses standardized turbines. ... Read more

Features

• 25ft hi-flex hose stays flexible - will not kink
• Quietest, most powerful, portable, professional 3-stage system
• Fuji XT model non-bleed spraygun
• Stainless steel fluid components
• Insulated stay-cool handle

Features

• Non-bleed spraygun, less blowing around of shop dust
• Stainless steel fluid passages
• Insulated stay-cool handle
• Pattern adjustable from 1/8¿ to 15¿

Features

• All the wearable parts you need to seal the cups

Features

• Extra high output for faster coverage on walls, ceilings and larger surfaces.
• Perfect for spraying splatter paints and multi-fleck.
• Stainless needle and nozzle.
• Aircap is hard anodized.

Features

• Installed as standard in any Fuji system
• Standard general purpose Aircap for all fine finishing applications
• Perfect for auto enamels, lacquer, varnishes and more
• Stainless needle and nozzle. Aircap is hard anodized.
• Aircap is hard anodized.

Features

• New improved 'duck-bill' type check valve
• Supplied attached to pressure tubes
• 5 in a pack

Features

• Filter for the Q-PRO Turbine
• Fits all older Q-Series turbines too
• Washable
• Easily replaced

Features

• Gaskets fit all newer (black color lid) cups
• Must be used with #2039 plastic diaphragm
• Chemical resistant
• Durable

Features

• Accessory for Fuji HVLP Super sprayer
• For use with lacquers, enamels, and water-based coatings

Features

• Diaphragm prevents paint entering the spraygun through the pressure tube
• Durable, long-lasting nylon
• 3 in a pack
• Can only be used with the thin 2037 Gasket

Features

• Needle/nozzle/jet set-up
• Splatter paints/latex
• Size .079 inch/2 mm

Reviews (1)

A Must for Latex
I have the Q4 and I used the -4 needle/nozzle that came with the original set-up, and yes that worked fine. However, putting the #5 needle/nozzle set-up, worked all that much better. Go for it, you won't be sorry. ... Read more

Amazon.com

Need greater coverage from your Fuji HVLP-SUPER industrial sprayer? This kit does the trick. It's designed to apply high-output splatter paint and other latex paints. It works particularly well with textures, stone-look paints, and industrial primers and gives you super-fast coverage on walls. The 2.2 mm nozzle produces awesome output, and because the HVLP is low-velocity, it's a cinch to control. Time is money, and this kit will save you both.--Kris Jensen-Van Heste ... Read more

Features

• Quickly distributes splatter paints, latex, stone finish paints, texture coating
• 2.2 mm (.086-inch) nozzle size for extra-high output
• Size .110 inch/2.8 mm
• #6 Needle/nozzle/jet accessory for Fuji HVLP-SUPER industrial sprayer

Features

• 1.8mm (.070") Aircap for faster production with any type of paint
• Hi-output for faster, wetter coverage
• Ideal for painting large surfaces with latex and paints
• Stainless needle and nozzle for ultra-clean spraying
• Aircap is hard anodized for durability precision spraying

Features

• Helps to reduce heat at the gun
• Highly flexible hose
• Amazingly lightweight and durable
• Takes weight off wrist
• Tremendous maneuverability

Features

• Perfect for touch up painting
• 1/2-pint cup assembly
• Three cups with heavy duty lids and gaskets
• Great for storing small amounts of paint
• Durable and lightweight

Features

• Best Aircap set for water-based or shading
• 1mm (.039") nozzle for fine to medium output
• Great for airbrush style spraying
• Stainless needle and nozzle for consistent, even spraying
• Aircap is hard anodized for durability

Features

• Needle/nozzle/jet set-up
• Lacquer and enamel
• More coverage than standard nozzle
• Size .055 inch/1.4 mm

Features

• Coarse on left side, fine on right
• Pair of filters for the Super PRO
• Fits all older Super Model turbines
• Washable
• Easily replaced