Features

• Fits most standard bench grinders with 1/2" arbors
• 6" diameter, 1/2" face
• For use with buffing and polishing compounds
• Cloth layers are stitched for durability and rigidity

Features

• Vitreous aluminum oxide for cooler grinding and sharpening
• 7" diameter
• 5/8" face width
• 5/8" arbor hole fits most standard grinders
• 46 grit for aggressive material removal

Features

• Fits the Delta 23-710 Sharpening Center
• Secures planer and jointer knives up to 12 inch long during sharpening
• May be used on wet or dry wheel to match the application

Reviews (2)

Poor workmanship
There is no way that this long blade adaptor can be leveled with the horizontal stone on the 23-710 Sharpener. It too is a poorly designed piece of equipment. The support can not be lowered sufficiently and even then it is about 1/4" higher on one side of the stone than the other. It is obvious that little engineering went into this support. I can not recommend this to anyone. It is a pure waste of money as is the sharpening center itself. I finally gave up trying to make use if this unit and bought a Swedish made one. Now, that one is a great 5+ star unit.

can't level as manual suggests
the only problem i had with this adapter is that the instructions in the manual for leveling it with the stones are incorrect. the set screws for the mounting bar go into a groove in it, so you can't rotate it. but, i simply spun the mounting bar so i DON'T hit the groove, and it's fine now. i'm not horribly THRILLED about that, but i can tolerate it. ... Read more

Features

• Fits Delta 5", 6", and 8" Bench Grinders, Universal Wet/Dry Grinder, and 1" Belt Sander
• Converts bench top grinders and 1" belt sander for stationary use
• Stand allows use of grinder at a comfortable work height with increased stability
• Easy bolt together assembly for quick set up
• Pre-drilled for easy mounting of grinders and sander

Reviews (2)

Great Grinder Stand!
Excellent heavy duty grinder stand. Very sturdy with handy center tray adding very good support. Easy to assemble with only one socket wrench. Took only about 15 minutes to assemble. Delta had the foresight to even include the necessary bolts, nuts and lockwashers for mounting a grinder to the stand. A nice touch. The included rubber leg caps keep the stand from slidiing around on tile workshop floors. This is a must have item for anyone who wants to save space on their workbench. This stand makes your grinder totally portable making it a far better choice then the pedestal type stands that must be permanently bolted to the floor. Highly recommended!

Grinder Stand
Solid and stable. Easy to assemble. Too short for my liking. Would have liked it to be ~4" taller. Bolting the grinder with a 2X under helped. ... Read more

Features

• Fits Delta 23-710 Sharpening Center
• 8" diameter
• 1" thick
• Designed for use with water for cooler sharpening
• 1000 grit for a finely honed edge

Reviews (1)

What, no sprinkles!
This is a lot of money for your basic brick shaped like a doughnut! Oh well, I guess if you need one to get your planner blades sharp again, it's not too much (right! Keep telling yourself that). ... Read more

Features

• 5/8-inch arbor hole fits Delta 23-700 Universal Grinder
• 10-inch diameter, 2-inch face width
• Wet wheel style for cool, clean grinding without damaging temper
• Vitreous aluminum oxide for efficient cutting action
• 220 grit for a clean, sharp edge

Features

• Fits Delta 23-710 Sharpening Center
• 5" diameter
• 2" face widht
• Vitreous aluminum oxide for cooler grinding and sharpening
• 120 grit for quick material removal

Features

• "Dresses" grinding wheel to provide a clean, fresh, square surface
• Keeps wheel conditioned for peak performance and consistent results

Features

• Restores grinding wheels to peak performance
• Spiked wheels remove surface glaze from grinding wheel
• Easy to use--just place against running wheel
• Diamond-tipped for long lasting use

Reviews (1)

Not what it appears...
I use my grinder more for sharpening woodturning chisels than anything else. In sharpening those curved gouges, my grinding wheels get divots.

Before I purchased this wheel dresser, I had a round carbo stick that did a good job of removing material but still hard to get a flat square surface.

What you can't see from the picture is that this Delta wheel dresser has a square cross section and is coated with diamond "dust".

While this may seem like a good idea since it would flatten a tall area of grinding wheel at one time, it turns out to not work so well since the grinding wheel is moving so quickly. A thin line of material would be easier to manage as the inch tall cutting surface can be difficult to control (too much bite).

Also of note, the diamond coating on the one I recieved is not flat. There are highspots that leave tiny vertical grooves in my wheel -- especially the white friable wheel.

This is not so good as one typically uses a wheel dresser to remove grooves.

In general I'm dissapointed with this item. I'm not so sure it's better than the carbo stick I bough from sears. I think next time I'll try a wheel dresser from a specialty company like Lee Valley Tool instead a large generic tool manufacturer like Delta. ... Read more

Features

• Aluminum oxide for long-lasting use
• 8" diameter
• 3/4" face width
• 5/8" arbor hole fits most standard grinders
• 36 grit for aggressive material removal

Features

• 8" diameter, fine grade
• 1/2" arbor hole
• Removes rust and scale from metals
• Fits a variety of standard bench grinders

Features

• Restores grinding wheels to peak performance
• Spiked wheels remove surface glaze from grinding wheel
• Easy to use--just place against running wheel

Features

• Fits Delta bench grinders
• Converts bench top grinders for stationary use
• Stand allows use of grinder at a comfortable work height with increased stability
• Easy bolt together assembly for quick set up
• Pre-drilled for easy mounting of grinders

Features

• 12 mm arbor hole fits Delta 23-700 Universal Grinder
• 5" diameter
• 5/8" face width
• Vitreous aluminum oxide for cooler grinding and sharpening
• 100 grit provides a honed edge

Features

• 6" diameter, fine grade
• 1/2" arbor hole
• Removes rust and scale from metals
• Fits a variety of standard bench grinders

Features

• Aluminum oxide for long-lasting use
• 6" diameter
• 3/4" face width
• 1/2" arbor hole fits most standard grinders
• 60 grit for a more finished surface

Features

• Vitreous aluminum oxide for cooler grinding
• 6" diameter
• 3/4" face width
• 1/2" arbor hole fits most standard grinders
• 54 grit for a finer surface finish

Features

• Aluminum oxide for long-lasting use
• 8" diameter
• 3/4" face width
• 5/8" arbor hole fits most standard grinders
• 60 grit for a finer surface finish

Features

• Aluminum oxide for long-lasting use
• 6" diameter
• 1/2" face width
• 1/2" arbor hole fits most standard grinders
• 60 grit for a more finished surface

Features

• Aluminum oxide for long-lasting use
• 7" diameter
• 1" face width
• 5/8" arbor hole fits most standard grinders
• 120 grit for a finer surface finish

Reviews (1)

MY REQUIREMENT OF GRINDING WHEEL
I need the following WHITE ALUMINIUM OXIDE WHEELS on a regular basis.THe outer surface is GRANULLATED SURFACE.I AM NOT AWARE OF THE TECHNICAL NAME.The purpose is grinding synthetic rubber rollers to get a smooth finish.THe sizes required are:

INNER DIA OUTER DIA THICKNESS(WIDTH) MM
1. 95 230 25
2. 150 250 150

Kindly quote PRICE & DELIVERY time, immediately.

IF YOU DO NOT HAVE THE PRODUCT- SUGGEST A GOOD MANUFACTURER! ... Read more