Features

• Parallel guide for model NOS C7SB, C7BD, and C8

Features

• Fits NV45AB2 & NV45AB2S, NV45AC
• 1 3/4" x.120
• Electro galvanized
• 7.2m Count
• Wire Coil

Features

• Easy to install and detach for portability
• Stabilize molding 3-4 feet long for smoother, more accurate cuts
• Designed for the Hitachi Compound Miter Saw Model C10FC

Reviews (2)

ok for cutting moderate lengths of molding.
The good points: 1) easy to install. 2) Help stabilizes molding 3-4 feet long. 3) Does not compromise the portability of the saw.

The bad points: 1) a little pricey for what you get. 2) Marginally helpful when cutting a little off a 7-8 foot length of molding. For this you really need a larger add-on fence system.

In my opinion, this device should really be included with the saw as a standard feature.

Great wings
These table extension wings are exactly what was needed in the workshop that I purchased them for. Now two man jobs have become one. The wings for the Hitachi miter saw were easy to install and just complements the saw. Its a great addition. ... Read more

Features

• Hitachi exclusive 5 year warranty
• Cooling fans and air flow design assure excellent low-noise operation
• Triple dust proof protection provides extended maintenance free operation
• Automatic dual clutch system
• 30-day satisfaction guarantee and one-year warranty on parts and labor

Features

• 0-41,600 blows per minute
• Heavy duty 5 amp motor
• 0-2,600 variable speed
• Drill only and hammer drill
• Side handle and depth guage

Features

• Hitachi exclusive 5 year warranty
• 4,000 RPM heavy-duty screw driver
• Extension Included
• LOX bit system
• Tool-less depth of drive

Features

• 22 position adjustable clutch
• Variable speed transmission with brake
• Flashlight included
• Bit set included
• High performance, fan cooled, rare earth magnet motor

Features

• Dust collector hood

Reviews (2)

Well worth the money
This is a solid addition to your Hitachi P12RA planer. It can be installed and removed in seconds, and connects to a standard 4" dust collector hose, without the need for adapters. The pictures you may see online or in catalogs don't do this product justice. It is fairly heavy guage steel and about as perfectly formed as it gets. The most important feature is that it works extremely well. It's worth every penny!

You need this!!
If your in the market for a planer - you should know that they produce MOUNTAINS of shavings in no time. Using this well made, all steel dust hood will help keep your shop a little more under control and will certainly help keep your breathing air a little healthier too. (Do I need to mention that you need to hook it up to a dust collector or a shop vac... it does nothing by itslef...) ... Read more

Features

• Easy carry case
• 10 piece quick change system
• 1/4" hex adaptor
• 4 counter sink inserts
• 5 1-inch insert bits

Features

• Thin kerf
• 12" Finish Blade
• 90 carbide teeth
• 1" arbor
• Precision cuts

Product Description

Hitachi 725130 1-1/8" Hex Asphalt Cutter 5" x 17" ... Read more

Features

• 5" Asphalt Cutter
• 1 1/8" Hex Shank
• 17" Long

Features

• Works with 9.6-24 volt batteries

Product Description

Hitachi 18000 O-ring parts kit for NR83A, NR83AA, and NV83A ... Read more

Features

• Removable side handle, improves control and comfort
• 5 Amp motor, forcible output power (1,010W) for the toughest grinding jobs
• Spindle lock, provides easy and quick disc changes
• Tool rest, conveniently located to protect the user and prolong tool life
• Slide switch, easy to use with a quick-off feature to shut off the tool immediately for added safety

Features

• 14.4 volt
• Ni Cad
• 2 Amp Hour

Features

• Get a FREE "DEAD-ON" Hammer with each purchase.
• Cuts faster, cleaner and lasts longer than any other blade on the market.
• Unique "M" style tip design gives you a 48 tooth finish with a 24 tooth blade.
• Greater wear area lasts 2X longer than traditional blades.
• Value Packed 20 pc. / carton.

Features

• 6.6 Amp Motor
• 3,000 VSR RPM
• Soft elastomer covered body
• Depth Adjusting, detachable nose piece
• Aluminum Gear Case

Amazon.com Review

The Hitachi C10FCD 10-inch dual bevel compound miter saw is a workhorse on wood. Quick and accurate, this saw makes perfect miter cuts, bevel cuts, and compound cuts in wood, plywood, color board, soft fabric board, hard board, and aluminum sash. A 13 amp, single-phase AC 60 Hz motor delivers 3,800 rpm of no load speed to the carbide-tipped blade, while overload protection keeps the tool from overheating even on the most difficult jobs. Among its features, Hitachi has included a couple that any woodworker will appreciate: namely a soft-start and electronic feedback power control that combine to reduce recoil and help the saw maintain its rpm throughout the cut. The motor housing bevels both right and left of center, for added versatility, while the onboard miter and bevel scales are both accurate and easy to read. Positive stops are provided for the most common miter cuts, and both scales allow the saw to be tightened in place at any angle for better precision cutting. The Hitachi dual bevel compound miter saw attaches securely to any workbench and is light enough (28.7 pounds) to take with you to the job site. Detailed instructions include a multi-page chart of bevel and miter cut settings for virtually any crown molding cut, another definite plus.--Carl Thress ... Read more

Features

• Switch lock ensures safe operation
• Saw bevels right and left 45 degrees
• 13 amp motor delivers no load speed of 3,800 rpm
• Soft start reduces recoil, for smoother, more accurate cuts
• Overload protection keeps the tool from overheating

Reviews (6)

A waste. Not much of a paper weight either.
Bought this when it came out from a source other than Amazon. This is one of most poorly put together saws it's been my displeasure to use, much less own.
To begin w/ the bevel locking lever and 90 deg. flip stop - when you use them you WILL lose knuckle flesh on these even after you've wrestled the lever around the dust bag. Everything is sloppy as far as the bevel fuction, part of the purpose for buying this saw ya know? Just a really bad set of design flaws. Also, 3 different times I've had a major failure in the table rotating mechanism. Hitachi uses 3 stainless steel "glides"(for lack of the actual part name) as the areas the table rotates against, tese are super thin guage and have tabs that seat them in the main body that the table rotates on. 3 times, about 2 wks apart one of hese pieces somehow unseated, got caught, jammed and crushed while in the rotating of the table and in order to free the tool up - of course in the field - it took an uncomfortable, and audibly unpleasant amount of force to dislodge the table from it's position. As a result, the aluminum surfaces on either side were so severly grooved that it would cost more to repair it than to buy another one. This thing I'm describing is easier to see than to describe but because it's the entire other primary fuction of a miter saw, it's just a little important.
Beyond that ... as long as you simply want to cut 90 deg, it's a beautiful unit. Very light, and the start up and accuracy is dead on. JUST DON'T MOVE ANYTHING!
Lastly, the repair service I just recently tried to have fix this thing said that Hitachi lists it as consumer grade. It shows and it's a shame they're marketing this piece of junk at the price it sells for.
Much as I hate to say it, I think the Delta's new dual bevel miter is a better more rugged tool.

So Far So Good
I had been comparing Compund Miter Saws for awhile now and debated between the DeWalt 12" Dual Bevel and this Hitachi. I could not justify the additional $180 to go with the 12" DeWalt. What I like about this saw is the soft start feature. This is a must, especially for a light saw (only weighs 33 lbs.). I do not like the fence height at only 1.5", however for what I use it for, I don't think it will be a problem. I was willing to sacrifice this to get the soft start feature. On a side note, the extension wings and horizontal vise assemblies are NOT included and are an extra $25 each. I thought they were included since the technical data section and the picture displayed through this web site led me to believe this.

Nearly Perfect
As an avid wood worker I had problems with my 12" dewalt compound Mitre saw and gave it to my Grandfather and began searching for a new one. I'm the type of person that reads a ton of review and recommendations on a product before I purchase a new tool. This is what I chose. It is hands down the most quiet saw I found, which is important to a woodworker with his shop in the basement. The fact that if bevels left and right saves a lot of time. And after checking for square out of the box. I was as close to perftect as any chop saw I've used. 5 Stars Hitachi has made another great product!

A Great Saw...But
Hitache makes great quality products. I particularly like the soft start electronic motor, with electronic brake. The only fault I have with the saw is that it comes with a crappy saw blade. I found that when I used this (quality ?} blade, my cuts in hardwood wandered. A great saw, but replace the blade when you get it.

A Great Tool
A great miter saw. The motor is mounted back, allowing an almost completely unobstructed view of the work. The electronics bring the saw up to speed quickly and smoothly, and then maintain that speed throughout the cut. The saw can be locked in the down position for ease of transport using the top handle. Cuts are accurate and repeatable. If I had to find faults with the tool, it would be that it can't do a 60 degree miter (as its brother the C10FC can), and that the built in clamp is a bit flimsy. Overall though, I don't believe you can find a better saw for the money. ... Read more

Features

• 30 day satisfaction guarantee and one year warranty on parts and labor
• Lightweight 6.2 lbs.
• Rear magazine loading
• Accurate overhanging nail tip
• Sequential firing mechanism ensures precise nail placement

Reviews (3)

LOVE IT
A VERY LIGHT AND EASY TO USE TOOL, OUR COMPANY HAS 6 OF THESE GUNS AND FIND THEM WORTH HAVING. YOU CAN ALSO SHOOT PASLODE FASTNERS IF THE HITACHI NAIL IS HARD TO FIND IN YOUR AREA. THE HITACHI FASTNER DOES WORK BETTER DUE TO THE STRONGER PAPER STRIP.
THE GUN IS LIGHT AND FITS IN TIGHT AREAS, UNLIKE THE PASLODE AND SENCO POSITIVE PLACEMENT GUNS. THE GUN CAN ALSO BE FITTED WITH A SAW HOOK AT THE BACK OF THE MAGAZINE.

Cannot find nails!
I called Toolcrib on 12/21 to order and was told they have no info on nails for this tool. How can they expect to sell the gun if they cannot supply bullets? They advised me to call Hitachi for a source. Pls advise me why nails are not on the net or in the Toolcrib catalog.
Regards
John Brauer

Super time saver
I am a professional carpenter in California, where extensive use of metal framing connectors is standard practice in both commercial and residential construction. This nailer proved to be worth it's cost purely in time savings. When the cost (to a customer) for a carpenter is roughly $70/hour, time IS money. The nail gun drives one nail only when the nail tip is placed in a hole in a connector, making for accurate framing. The reliability of Hitachi tools is well known, so don't worry about that. The only drawbacks are that it will not fire all nails in the nail strip (jamming reducer), and that it doesn't always drive nails full depth into engineered lumber (heavy beams), although this is more likely a function of the compressor. ... Read more

Features

• 6.6 Amp Motor
• 2,600 VSR RPM
• Soft elastomer covered body
• Depth Adjusting, detachable nose piece
• Aluminum Gear Case