Features

• OSHA and ANSI compliant
• Provides excellent protection in a cantilever style mount
• Overarm mount allows full unobstructed use of fence capacity
• Easy adjust crank housing
• Clear shield with dust port and retractable anti-kick fingers

Reviews (1)

Missing a few parts....for now....Update
I ordered this blade guard about a month and a half ago after researching all available options. The ability to directly mount it to the rear rail on my table saw (Jet 3HP) and the hold-down design of the shield are what appealed to me.

Unfortunately, I haven't been able to fully assemble the guard yet. Only half of the guard has arrived so far:the mounting brackets and a small bag with some of the hardware. The dust shield, cantilever mounting system...oh, and the directions, haven't arrived yet. Whether it is a packaging problem with HTC or a shipping issue with Amazon, I'm not yet sure. I will follow up with an updated review as the situation unfolds.

It appears to be well made, sturdy and the perfect size for my 30" fence system. But until the rest of the parts arrive, I have to give it one star.

UPDATE
After sending emails to nearly half a dozen customer service representatives at Amazon, the entire order finally arrived nearly two and a half weeks later.

This is a well-built, easy to assemble blade guard. Set-up took maybe a total of two hours, but I took my time. Once set up, adjustment is easy and straight forward.

The included splitter is fairly worthless. In fact, I just took a hacksaw to the splitter included with my JET 3HP tablesaw and "made" my own. In fact, I took a calipers to the HTC splitter and it was wider than the kerf made by my standard width saw blade. Let's just say this helped test the hold down capabilities on a few cuts of plywood --the blade guard did its job, but I was not impressed with the splitter.

Overall, this is an excellent addition to my tablesaw setup.

For HTC, I would award 4 STARS.

Amazon gets 2 STARS...
for taking so long to correct an obvious problem ("Please recheck the contents of the box for the missing parts..."According to HTC I was missing one of two boxes.) I would have given one star to Amazon, but eventually a customer service manager took care of everything in one day, that previous reps. bounced around for a week and a half. ... Read more

Features

• Opens up additional shop space
• Fits Delta Q-3 18" scroll saw
• Fits Dewalt DW-788 Scroll saw on 3 leg stand
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Lifetime warranty
• Position your machine where it works best
• Frees up valuable floor space
• Heavy gauge steel construction
• Two rigid wheels and one swivel wheel raise your machine 3/4-inch

Reviews (4)

Ludicrous, if not dangerous
This stand is unstable and a real letdown. I feel it should be recalled. By comparison, the HTC stand for my jet bandsaw is of the highest quality and design.

1) It is different than depicted in the picture. The one in the picture would work better.

2) It is oversize for a variety of models. The drill press rests on the inside of the brackets which are not heavy enough gauge to provide firm support which can amplify any vibration.

3) There are no holes drilled in the base to bolt the top heavy drill press to the stand.

4) The center wheel design would allow a child to easily tip it, creating a real hazard.

I am now bolting the drill press to a 1" oversize MDO base mounted to a Rockler mobile base supported by a 1 1/2" steel channel.

HTC Mobile Base for Jet 17" Drill Press
The picture displayed for the HSO-593 does not match up with what the actual drill press mobile base looks like. I was hoping that the previous reviewer, Norman Cumings from College Station, TX USA, was overly critical of this base. However, after putting it together, I couldn't agree more about it being totally unstable. I am waiting for the UPS truck to pick it up and take it back.

HTC Mobile Base for Jet 17" Drill Press
I have three of HTC's model 2000 universal bases and one made for the Jet 14" CB band saw. I am satisfied with all of them. I just assembled the model HSO-593 base for my Jet 17" drill press and will not keep the thing. It is completely unstable. So much so that I would hesitate to just move it about on it, much less, use the drill press while mounted on it! This base is what HTC calls a "K" design and as a structural engineer can say it is an improper design for any base much for the top heavy drill press. I am returning the unit and will find a location in my shop where I can permanently mount the drill press.

Weird looking drill press!
Weird looking drill press! ... Read more

Features

• Use with Jet Xacta, Powermatic Accu-Fence, and Biesemeyer Systems
• Includes 30-inch rail assembly for HTC-900 Multi-Fence
• High-tech molded steel cam and clamping mechanism
• Heavy duty, easy to use micro-adjust, enables you to attach fence accessories and ship built fixtures and jigs
• Exclusive quick change fence faces

Features

• Opens up additional shop space
• Fits machine size of 21.75"x21.75"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Opens up additional shop space
• Fits machine size of 17.75"x29"
• 1000-pound capacity
• Heavy-duty welded steel construction
• Move your machine anywhere with ease

Features

• Opens up additional shop space
• Fits Powermatic model 180(Q) 18" Planer
• Extra Capacity Base
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Wood knob
• Low 21 degree blade angle
• Base machine ground for accuracy
• Finger and thumb grooves on the sides
• Generally used for end grain planing

Features

• Opens up additional shop space
• Fit machine size of 17.63"x17.63"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Finish honed ready for use
• Shatterproof red acetate handles
• High quality Sheffield England steel
• 4.5" blade tempered to Rockwell 60-61 over entire length
• Complete with chisel tip guards

Features

• Opens up additional shop space
• Fits Delta 6" jointer model 37-190
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Opens up additional shop space
• Fits machine size of 16.75"x23"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• 2.5" dust port
• Mounts directly to the HTC-900 fence
• 40" overall length
• 4" Bit opening
• Wood faces

Features

• OSHA and ANSI compliant
• Provides excellent protection in a package ideally suited to 10" contractor style saws - Also works on cabinet saws
• Original style Brett-Guard for 10" saws, with left and right mounting plates
• Easy adjust crank housing
• Clear shield with retractable anti-kick fingers

Features

• Fence face replacement for HTC-900
• Machined from hi-tech UHMM material

Features

• Fits JWTS-10PF contractor saw
• one swivel and two rigid wheels
• All steel construction

Features

• Opens up additional shop space
• Fits machine size of 13.5"x18"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Opens up additional shop space
• Fits machine size of 14"x19.5"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Lifetime warranty
• Mobile base for HTC's HBT-330 tool table
• Three-point leveling system
• Raises machine 3/4 of an inch off floor
• Heavy-gauge steel, full welded for strength and finished appearance

Features

• Finish honed ready for use
• Traditional Beech handles with brass ferules
• High quality Sheffield England steel
• 4.5" blade tempered to Rockwell 60-61 over entire length
• Complete with chisel tip guards