Features

• Finish honed ready for use
• Comfortable soft grip handle
• High quality German steel blades
• 4.5" blade tempered to Rockwell 60-61
• Complete with chisel tip guards

Features

• Rosewood bevel stock
• Brass accents top and bottom
• Parallel blade held in place by screw

Features

• Plastic handle and knob
• Base machine ground for accuracy
• Tempered blade, honed ready for use
• Frog adjustment screw for fine adjustments
• Brass adjusting nut for simple and rapid adjustment

Features

• Heavy-duty Sheffield steel
• 90 degree angle on curved end
• Low profile claw and chisel for increase leverage

Features

• Heavy-duty Sheffield steel
• 90 degree angle on curved end
• Low profile claw and chisel for increase leverage

Features

• Stained wood handles
• Base machine ground for accuracy
• Tempered blade, honed ready for use
• Frog adjustment screw for fine adjustments
• Brass adjusting nut for simple and rapid adjustment

Features

• Finish honed ready for use
• Shatterproof red acetate handles
• High quality Sheffield England steel
• 4.5" blade tempered to Rockwell 60-61 over entire length
• Complete with chisel tip guards

Features

• Finish honed ready for use
• Blue Polypropylene handle for mallet or light hammer use
• High quality Sheffield England steel
• 4.5" blade tempered to Rockwell 60-61 over entire length
• Complete with chisel tip guards

Features

• Finish honed ready for use
• Blue Polypropylene handle for mallet or light hammer use
• High quality Sheffield England steel
• 4.5" blade tempered to Rockwell 60-61 over entire length
• Complete with chisel tip guards

Features

• OSHA and ANSI compliant
• Provides excellent protection in a package ideally suited to 10" contractor style saws - Also works on cabinet saws
• Original style Brett-Guard for 10" saws, with left and right mounting plates
• Easy adjust crank housing
• Clear dust ported shield with retractable anti-kick fingers

Features

• Mounts directly to the HTC-900 fence
• 40" overall length
• Dual position
• Quick attach / detachConverts to standard fence face

Features

• Opens up additional shop space
• Fits machine size of 18"x26"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Opens up additional shop space
• Fits machine size of 25.5"x25.5"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Opens up additional shop space
• Fits machine size of 15.25"x17.25"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Opens up additional shop space
• Fits machine size of 22.5"x25"
• 500lb Capacity
• Heavy duty welded steel construction
• Move your machine anywhere with ease

Features

• Exclusive wedge-lock inner support design
• 500lb capactiy
• Two dual bearing, galvanized steel rollers at 6" x 1.625" , with heavy-duty hex axle
• 22" to 32" height adjustment
• Non-skid leveling feet

Features

• 100lb capacity
• 13" dual bearing, galvanized steel roller
• Spring loaded axle
• Powder coated mounting bracket

Features

• Sturdy steel construction
• Powder-coated finish will not rust
• Attatches to mobile base and supports fence
• 1 year warranty

Features

• Heavy gauge steel, full welded for strength and finished appearance
• Fits JWTS-10JF table saw
• Two rigid wheels, one swivel wheel
• Raises machine 3/4-inch off floor
• Brake knobs to set brake on the two rigid wheels

Reviews (5)

Like gliding on ice, deadly ice.
This mobile base went together in just five minutes. The steel and wheels are all of good quality material. Caution! When I was cutting a 24" X 48" X 5/8"piece of plywood, the tablesaw started to tip due to only one wheel at one end. This almost cost me severe injury to the face as the blade was still running. Talking to techs at HTC, they tell me I would be better off with the "four wheel" mobile base for tablesaws. This stand is being returned and I am buying the HTC 2000 as recommended by the HTC tech team. The one star is for the quality of this product, not safety.

HTC HJTS=761 Mobile Base
Being a owner of a table saw, I know how cluttered your work area can get. With this mobile table, you can take the saw to the trouble instead of the trouble comeing to the saw.

This could be dangerous!
This was the third moble base I bought for Jet equipment and while I consider the other two (for a band saw and jointer) as really good values, the one for the 30" fence cabinet saw is a hazard. After the saw was delivered I put the base together, a simple opertation, then slid the saw off the pallet and on (or should I say in) to the base. I continued to assemble the saw, alligning, etc, until everything was as good as it gets. Finally it is time to move the saw to its more less perminent home. IT ALMOST TIPPED OVER. Upon examination I could see the reason. The swivel wheel was on the side opposite the motor and table extension. This put the two other wheels near the CG for the unit so any movement tended to tilt the entire unit over almost causing 500 pounds of brand new saw, etc. to tumble. Perhaps I would rate this base higher if I had not been forced to rotate the saw 180 degrees in the base by myself, a nerve wracking task. Once it was turned it demonstrated more stability, but not as much as I think this unit should have. Of the three bases I now have I wish one was the Shop Fox.

HTC Mobile Base far exceeds my expectations. The one to get!
I looked at lots of mobile bases before buying this one, then a friend said "have you seen the HTC one? they are the best!". Being that he was an avid wood worker I took his advice and am glad I did.

HTC balances mobility and safety for a truly sturdy unit. The base unit is welded (not assembled at home like some mobile bases) and is VERY well made. All three wheels have wheel locks on them.

The assembly (basically putting on the wheels), was simple and the unit looks great! The only hard part is putting the saw in the base, I finally decided two people would make this task much easier.

If you don't need true four way mobility (an I am unaware of a base that provides this) this mobile base is the one to buy.

Needs better wheels
I thought I was getting an item with mobile casters but I did not read the description well enough.This item has one caster wheel and two stationary wheels that you have to stop, bend over and tighten a hand bolt to lock. Moving the item around is easy if you have a lot of mobility room but if you have that much room...you don't need the stand. Save your money and look fo a stand with at least 3 mobile wheels and a lift/lower locking type mechanism. Too much trouble to return so I'm going to keep it and eventually put something less needed when I get my permanent shop. Wouldn't buy again and will probably not buy HTC products either. ... Read more

Features

• Heavy gauge steel, full welded for strength, powder coat finish
• Fits Powermatic 64, 64-A, 63, and General 50-175/185
• 2 rigid wheels, 1 swivel wheel
• Raises machine 3/4-inch off floor
• Brake knobs to set brake on the two rigid wheels