Features

• C3 carbide tips
• Thin kerf design
• Hardened plate
• Specially engineered heat vents
• Unique shoulder design

Product Description

10 piece sets contains 5 Spiral Fllut Screw Extractors (size EX 1 thru EX 5) with 5 corresponding standard Cobalt Drill Bits Comes in storage case ... Read more

Product Description

MARATHON CORDLESS CIRCULAR SAW BLADES Ultra thin kerf for more cuts per charge Construction carbide teeth for longer life Face ground carbide teeth for fast, clean cuts Fully hardened plate runs truer longer Reinforced shoulder for added durability Carded 14027 5-1/218T MARATHON BLADE 5-1/2"/18T 10mm ... Read more

Features

• Precision-ground edges on the blades ensure a tight grip on each cut for superior cutting quality
• Hot drop-forged steel blades provide maximum strength and long life
• Durable spring washer holds blades tightly against each other when cutting
• Handles are encased in Plastisol for better comfort and reduced hand fatigue during cutting
• Pro-Touch Grips provide superior comfort, resists twisting

Features

• Perforated neoprene padding
• Three fingers exposed
• TechnoGrip reinforced palm
• Terry cloth insert for quick brow wipes
• Adjustable wrist strap

Features

• Guarded release helps keep work safe and fast
• Non slip rubberized grip
• Convenient wire cutter
• Involute jaw curve
• Adjusting screw gives exacting pressure

Features

• 118 Degree tip
• Black Oxide
• High Speed Steel
• Fractional Straight Shank
• Jobbers Length

Features

• Full lifetime warranty
• 6", with a jaw adjustment range up to 2 1/8" and throat depth of 1 1/2"
• Quick, easy locking and release action
• Leveling swivel pads protect delicate material
• Guarded release helps keep work fast and safe

Reviews (2)

From a woodworker
Furniture making is a hobby of mine. This clamp has been useful in a variety of situations with stationary and hand held tools. That's why I'm waiting for another to arrive. I let it sit at the base of my drill press on a magnet. I bought it to hold down pieces as they were drilled but have found it handy throughout the shop. I also have many 3/4" and 1/2" pipe clamps, one hand operation clamps, and many C clamps. This clamp provides the greatest force with the least effort.

Tool of Many Uses
I have used my pair of these as glueing clamps, construction clamps, hold down clamps, stop block clamps and who knows what else.

They were real handy when I was assembling my Jet 5hp table saw (see that review). I used two of them to hold up the cast iron extension tables while I aligned them and tightened the bolts. That was HEAVY duty. They are easy to adjust and can be operated with one hand once the screw is adjusted to the grip thickness.

Every shop needs a variety of Vise-Grips to survive. How DID man survive before Vise-Grips? ... Read more

Features

• Hammerhead
• Drop Forged Jaw
• Heavy Duty Cast Iron Housing
• I-Beam Handle
• Easy-Spin Adjustment Nut

Features

• Hammerhead
• Drop Forged Jaw
• Heavy Duty Cast Iron Housing
• I-Beam Handle
• Easy-Spin Adjustment Nut

Product Description

Straight shanks M 42 cobalt steel 135 split point for clean entry and faster drilling For drilling in stainless steel and other high alloy steel 1/16" thru 1/2" by 64ths, metal index/case ... Read more

Features

• 4-1/2" Handscrew clamp
• Adjust to any angle
• For odd shapes

Features

• Full lifetime warranty
• Convenient wire cutter
• Involute jaw curve
• Adjusting screw gives exacting pressure
• Guarded release helps keep work safe and fast

Product Description

633 series. Cobalt fractional straight shank jobbers length, 135ø split point begins drilling immediately minimizing "bit walk", heavy duty web construction for strength and durability, 8 percent cobalt for much higher hot hardness and abrasion resistance. Recommended for drilling hardened steel, super alloys, titanium and stainless steel. Carded. ... Read more

Features

• Constructed of M-42 8 percent cobalt high speed steel for super abrasive resistance in tough metals
• Heavy duty spiral flute design produces faster chip ejection
• Shorter cutting lips reduce torque for drilling in high tensile strength materials.
• 135-degree split point reduces feed pressure for easier penetration without work hardening

Features

• 3" Spring Clamp
• Soft Grip Pads

Features

• Six popular sizes
• Includes 3/8", 1/2", 5/8", 3/4", 7/8", and 1" and rack
• Patented micro-groove point and cutting edge with extended spurs
• For all 1/4" and larger electric drills
• Bores two times faster, lasts three times longer

Reviews (1)

Another boring review
Sorry I couldn't resist. These bits are an old standby. They work great in soft materials like wood and plastic. Speedbor is very accurate. If you hit a nail they get dull fast but you can resharpen them. Even if you don't you're not out much. I know a lot of guys that use these for making custom bits. maybe they grind a taper on them for candle holders or they cut the shanks for stubby bits. The list goes on and on. I threw away my rack. I wrapped the bits in rubber bands so they would stay together. The whole bunch fits nicely in my Makita box. A must have item. ... Read more

Product Description

633 series. Cobalt fractional straight shank jobbers length, 135ø split point begins drilling immediately minimizing "bit walk", heavy duty web construction for strength and durability, 8 percent cobalt for much higher hot hardness and abrasion resistance. Recommended for drilling hardened steel, super alloys, titanium and stainless steel. Carded. ... Read more

Features

• Constructed of M-42 8 percent cobalt high speed steel for super abrasive resistance in tough metals
• Heavy duty spiral flute design produces faster chip ejection
• Shorter cutting lips reduce torque for drilling in high tensile strength materials.
• 135-degree split point reduces feed pressure for easier penetration without work hardening

Product Description

633 series. Cobalt fractional straight shank jobbers length, 135ø split point begins drilling immediately minimizing "bit walk", heavy duty web construction for strength and durability, 8 percent cobalt for much higher hot hardness and abrasion resistance. Recommended for drilling hardened steel, super alloys, titanium and stainless steel. Carded. ... Read more

Features

• Constructed of M-42 8 percent cobalt high speed steel for super abrasive resistance in tough metals
• Heavy duty spiral flute design produces faster chip ejection
• Shorter cutting lips reduce torque for drilling in high tensile strength materials.
• 135-degree split point reduces feed pressure for easier penetration without work hardening

Features

• 5lb
• Representing the standard for excellence
• Permanent bright yellow line

Features

• Also available with titanium nitride coating for longer life
• High speed steel for durability and longer bit life
• Single-flute cutting edge for greater control through steps
• 3-fluted shank prevents slipping in drill chuck
• Available in fractional and metric sizes