Features

• Hardened Tooth Points
• Larger Gullets
• Ground and Milled Teeth
• For All Woods

Features

• 133 inches by 1-1/4-inch
• 1.3 teeth per inch
• Hook tooth blade

Features

• Table saw dust hood
• 4" OD, 14-1/16" length, 14-1/16" width, 2-1/2" height

Features

• Three point Leveling System
• Powder Coat Finish
• Locking Casters

Amazon.com Review

A great carpenter once referred to sawdust as "the indomitable scourge silently mounting in woodshops nationwide." Well, now you can fight back with Jet's 1,200 cfm dust collector. Running a powerful 2-horsepower induction motor on 230 volts, this handy shop tool comes standard with 7.36-cubic-foot bags that collect particles 30 microns and larger. The thickness of the 12-inch steel blower wheel is great for handling larger particle-producing applications. As is standard on most models, two 4-inch dust ports feed into a main 6-inch tube, allowing you to connect it to multiple machines. For convenience, Jet has placed the entire unit on easy-to-roll casters, so it can be moved around the shop when necessary. One unique feature separating Jet's dust collector from the competition is how easily the lower bag can be removed and reattached. The bag is held securely in place by a flexible metal band, so the bag pops in and out without the hassle of cinch straps you'll find on other models. Standing 96 inches tall and pulling 5.34 cubic feet of air, this machine is perfect for medium-to-large shops. A good dust collector, like this one, improves your workplace environment and also extends the life of your tools--two pretty compelling reasons to get one for your shop. --Justin Paul ... Read more

Features

• 2year warranty
• 2hp, 1ph 230v only
• Compact size
• 1 hose, 6-inch 2-hose intake 4-inch 34x20-1/2x96 inches
• Bag diameter 20 inch

Reviews (2)

Good start - be careful of specs - buy better bags
I've owned one for 3 years. It is connected via 4inch metal ducts to 6 machines - longest run is about 20 ft. Jet, like Delta and others, overrates CFM, especially thru 4in opening. But it does an adequate job on large particles. As advertised, the JET standard bags are rated for 30 microns. That's way too large for most dust from table saws, sanders, etc. Buy felt bags rated to 5 micron. They cost more, but your lungs will thank you. The bags will still be hard to change unless you add some hangers made of coat hangers.

I'd change my intake from the dual 4inch to a single 7 in (converter plate from Oneida and others) and the main ductwork in the shop to 6in. Then, I'd have a 4 star system. By the way, these systems are noisy.

My shop is immaculate now!
I went with the DC-1200 to reduce the amperage draw on my 115V circuit, and also because it had the specs to give me plenty of versatility. My shop is pretty small, and everything is on wheels. Right now the DC can be wheeled around near whichever machine I'm using, but in the future when all is fixed, this DC unit will still have the suction to handle my planer from across the room via flex hose.

Assembly was easy, with well-written instructions. The unit was pre-wired for 230V, so no changes needed there. The lower bag is difficult to get back on without a helper, though, and the filtration of the stock bags leaves something to be desired. I'll soon be replacing them with felt bags. About the only other item on my wish list for this unit would be having the power switch mounted higher, so I don't have to bend down to the floor to turn it on or off.

Still, this unit works very well for the collection of the big stuff, and I haven't touched a broom in a while. My friends with the smaller Jet and Delta units can't make that claim. ... Read more

Features

• Pipe fitting for dust collection system venting
• For use where design limitations will not allow use of a Y
• For branching off the main ventilation line
• Slightly undersized to fit inside hose
• 4-inch OD

Reviews (1)

It Works
This is not a complicated piece of equipment, but an essential piece of equipment for a dust collection system. The ends were all 4 inches and the hose fit snuggly on the end, and the wire clamps held sercurely. Overall, a good link in the chain.

Based on the design and area to cover in the dust collection system, if possible, it is better to use the "Y" fitting rather than the "T". The Y connection allows for a better flow of air, more continuous, than the T. I used 4 Y's and 2 T's. The T's are in the corner of the shop. ... Read more

Product Description

Heavy-duty, ball bearing construction. Dynamic counterweight vibration isolators forlow vibration sanding. 1/4" (NPT) air inlet. 3/8" Inside diameter air hose size. 90 PSI air pressure. ... Read more

Features

• Overall Length: 7-3/8".
• Overall Length (inch): 7-3/8.
• Net Weight: 4-1/2.
• Free Speed RPM: 8,000.
• Spindle Thread: -. Pad Size: 3-2/3 x 6-1/2. CFM: 4.

Features

• Black hose
• 3" x 10'

Reviews (1)

Good Consistant Hose
This is a black 3" hose, made of ABS plastic. The sizing is very consistent, as I cut it into 3 foot sections, each end maintained 3 inches. The hose is very rigid, almost crushproof, yet flexible enough to move from side to side and up and down and all round. It is not flexible enough, though, to move back and forth (in and out) as if you were moving machinery from the wall to a work area. But it is an excellent hose for permanent pieces of equipment for your dust collection system. ... Read more

Features

• 4-inch dust chute attachment
• Fits JWP-12-4P planer

Reviews (1)

Does The Job
I believe the actual picture is upside down. When installed at the back of the planer, the 4" dust opening points straight up.

There's not much to this except its an optional accessory for the planer. It should have been included with the purchase. The unit is made entirely of metal which may account for the hefty price and the slightly out-of-round 4" dust opening. But once you have the dust hose connected, its a pleasure to see the shavings being whisked away. ... Read more

Features

• Accessory for JET JWBS-14OS 14" band saw
• Can be used for both straight and angled cutting

Reviews (1)

Where's the handle?
Potential users: Click on the "See Larger Picture" link. Notice that (threaded) hole on the flat part at the top? That's where the handle should be, the handle that gives you oomph to push and guide your stock with the miter gauge. Makes the cutting LOTS easier and more accurate with larger pieces!
Jeez, including this handle with the gauge couldn't have cost 'em more than a couple bucks--but they don't. Nor do they give you any way that I could find to locate and order one. ... Read more

Features

• Universal dust hood
• 4" OD, 6 1/4" length, 6 1/4" width

Reviews (1)

Flexible Connector!!
Although the universal flange is not flexible, it has a wide variety of potential uses. With a 4" hose opening, it can be used as a small sweeper type attachment, mounted directed on a machine, or into a "cabinet" attachment.

I built a small 6x6 box, mounted this flange on one end, left the other end open, and leave the box on the end of the workbench. When down for the day, just swept the dust/debris to the end of the bench for cleanup into the DC system. The same type of application could be used on a lathe, drill press, or for anyother type of equipment which does not have a pre-assigned dust port. This allows you to create your own dust port.

A nice simple attachment for any DC system. ... Read more

Features

• Allows quick hook-ups
• Perfect for mobile dust collectors
• Spiral end style

Features

• 4-inch diameter
• 5-pack

Reviews (3)

What's the application?
The steel band clamp should only be used in one type of application. That being where you are putting two SMOOTH surfaces together, like a garden hose or radiator hose. But with a DC application of a ribbed hose, DO NOT use the steel band clamp, use the wire clamp.

The steel band clamp will only strip and never be fully seated trying to secure the wire rib. The steel banding is not designed to do that task. Whereas, the wire clamp will actually strattle the rib on both sides and create a perfect clamping fit.

I tried to save the twenty cents over the wire clamp, and wound up stripping the clamp thread on about 50% of the applications with the steel band clamps. I antied up and spent the extra cash and got the right product, the wire clamps for the ribbed DC hose.

Don't use them
Don't waste your time with these. I returned 60 of these clamps after using 12 and found them to strip the thread very easily. Buy the wire clamps.

slippin and a' slidding
I used both types of band clamps- steel band clamps and wire band clamps- with the ribbed hose in my dust collection system.The steel band clamps slipped more, were harder to control going on and didn't seat as well as the the wire band clamps ... Read more

Features

• Grounding kit
• 50 feet of wire
• Provides everything you need to ground a dust collection system

Reviews (1)

Not terribly great
What's the point. I can get spare wire and wire nuts to ground my system far cheaper than this. i find the braided copper hard to deal with and am far happier using spare romex I have lying around the shop. Do yourself a favor and make one of these yourself. ... Read more

Features

• 180 Pounds
• 3/4 HP Motor
• 16 Speeds
• Built In Work Lamp
• 5/8 Inch Chuck and Key Included

Product Description

Corrugated-topped steel screws turn easily under load. Semi-steel base is set to sit firmly in place without slipping. Easy to carry built-in handle. Acme type threads. Turning bars not included, but are available as an accessory. Rated capacities of 5, 10, 15, 20 and 25 tons (as listed in model number). ... Read more

Features

• Screw Size: 1 x 6.
• Height Closed: 9-1/2.
• Height Extended: 13.
• Bar Hole Size: 9/16.
• Approximate Weight: 251 lbs.. For Model Number: 1900. External Static Pressure (WG): 10.2. Bag Area (square feet): 10.68.

Features

• Hydraulic pump features chrome plated ram and safety overload bypass system
• Steel swivel casters with foot brake to prevent movement
• 6-position built-in jack stands to prevent accidental lowering
• Tow handle with rubber grip included.

Product Description

ALC Model F-30 Portable Siphon Blaster. Uses abrasives or liquids. Hose length of 10'. Model F-50-7 gun with 1/4" ID nozzle and 1/8" ID air jet. Lightweight and portable. Minimum air volume 7 CFM @ 80 PSI. Made in the USA. Availability: Drop ship from factory. Usually ships within 5-7 days. Ships via UPS. ... Read more