Features

• Reduces virtuallly all splintering and tearout
• High Density Phenolic laminate
• Includes precision leveling screws

Features

• 3" Table Insert for use with 3" Rubber Drum
• For use with JBOS-5 (708404) sander
• Single-nipple drop-in attachment for consistent installations
• 3-inch table insert for JET Oscillating Spindle Sander (model 708404)

Reviews (1)

A must have for the optional 3" spindle
At first impression you are tempted to buy the optional 3" spindle for the Jet Benchtop Osciallating Spindle Sander, and skip the table insert. If you are only doing larger pieces it is possible, but the insert is an important fill to the table top.
All of the spindle inserts are easy to change, since they are only a drop in device with a single nipple so they go in the same every time. Several inserts come with the unit to keep the work support right up to the edge of the spindle sanding sleeve. The 3" shouldn't be any different and that is why this insert is a good idea as well. Highly recommended. ... Read more

Features

• Reducer
• 4" to 3

Reviews (1)

Reduce Hose Size, Increase Air Suction
If you need to step down in the DC system, which is recommended, this works great. The ends are to size stated, the hose fit easily and the wire clamps put it all together snuggly. The fitting allows you to step down from a larger main line to smaller branch lines near the machine, thus increasing the air suction, where it's needed most, by the machine ... Read more

Features

• Fits 708620G

Features

• 20-inch knives
• Set of 4
• High speed steel

Features

• Great for turning the outside of larger bowls
• Heavy-duty steel bar stock
• Mounts into any toolrest banjo with a 1" post bore
• 6" radius and 12" length

Features

• Tubular steel handles
• Replaceable jaws
• Clipper type jaw
• One year warranty

Features

• One size fits all
• Soft polyurethane jaws designed to avoid marring the surface of softer metals and to protect jaw face
• Designed to fit any 3"-6" vise jaws, including all Wilton and Columbia vises
• Magnetic back mounts securely to jaw
• Great for holdiing wood, metal and tubing

Features

• Lightweight
• Ball Bearing Construction
• Variable Speed Control
• Hardened Gears

Features

• Jointer dust hood
• 4" OD, 8-7/16" length, and 10-1/4" width

Features

• Jet Dust Collector Bags Now Have An Elastic Band For Easy Installation
• 30 Micron Filter Bag

Features

• Lifetime warranty
• Drop-forged alloy steel, heat-treated and hardened
• Raised landing, chrome-plated and polished
• Special design on box end drives the side of the hex cut, not the corner
• 3/8, 7/16, 1/2, 9/16, 5/8, 11/16,3/4, 13/16, 7/8, 15/16, and 1"

Reviews (2)

Replace the Plastic Knobs that Lock the Wheels
P.S. The wimpy little plastic star knobs that one turns to lock down the front wheels are difficult to grasp and twist with sufficient torque unless you have extremely small hands and very strong wrists. I replaced the knobs (5/16"-18 threads) with two simple ratchet handles that are commonly used on jigs and fixtures. You can buy them about anywhere. I got mine from TWC (part # 00689) for a few bucks each, and they are a significant improvement. Not a huge deal unless you work in a small space and have to move your equipment frequently, as do I.

OVERPRICED
Sturdy steel frame, but puny little wheels with wimpy friction locks and cheap black plastic star wheel screw-downs to lock the two front wheels. Should cost half as much. Private-labeled by HTC for Jet, and Jet must make a huge mark-up on this item. They could spend an extra few dollars and at least offer industrial-strength value for the price. ... Read more

Product Description

Ball bearing and needle bearing construction for more efficient performance. Muffled handle exhaust for quiet operation. Quick action reversing valve and quick change hex collet. Adjustable clutch. 1/4" Capacity. 1/4 (NPT) air inlet thread. 3/8" Inside diameter air hose size. 90 PSI air pressure. 4 CFM air consumption. ... Read more

Features

• Overall Length: 11".
• Style: Straight.
• Overall Length (inch): 11.
• Net Weight: 2-2/3.
• Free Speed RPM: 800. Torque (inch/pounds): 20 - 145.

Features

• 52 inches long
• Replaceable jaws
• Needle bearings
• One year warranty

Features

• Jointer dust hood
• 4" OD, 8-1/4" length, 8-1/4" width

Features

• Adapter
• 2 1/2" x 3

Reviews (2)

Fits tight, does it right.
This fitting is well made, just like the rest of the Jet dust collection fittings. I am using this on a Delta Sanding station. The output port size of the sander is 3 inches. This fits in snugly. My dust collection hose is a standard flexible 2 1/2", and that falls inside this reducer snugly as well. So there you have it. This is actually a male fitting for a 3" opening, and a female fitting for a 2 1/2" opening.
Hope this helps.

Reduce hose size, fits shop vac fittings
If you need to step down in the DC system, which is recommended, this works great. The ends are to size stated, the hose fit easily and the wire clamps put it all together snuggly. The fitting allows you to step down from a larger main line to smaller branch lines near the machine, thus increasing the air suction, where it's needed most, by the machine.

Also, a lot of shop vac fittings are the 2 1/2 inch size. ... Read more

Features

• Filter/Collector Bag: Collector.