Features

• # 8 Decking Screws
• 3 inch CD17 Drill Point
• # 2 Square, Flathead
• Screw Coating Silver Kylan

Features

• Limited warranty, 30-day no-risk trial
• 6.5 amp, 12--volt motor
• 0 to 4,000 rpm
• Snap action clutch
• Fixed, Quik-Lok double insulated cord

Reviews (2)

Did not work out for me.
I frequently get furniture etc from IKEA or Home Depot, and I found that my wrist started aching with twist action and I decided to buy a power screw driver. I bought Milwaukee 6742-20 Drywall Screwdriver, online, which also is my first power tool. Back at home I was eager to use it and decided to assemble a 6 chair Dining table. To my disappointment I found this screwdriver was too powerful for these types of job. The screwdriver would drive in the screw so fast that before I could realize that it is going in wrong direction, it would already be in. And the screw would be so tightly driven in, due to the power of this screwdriver, that removing it almost destroyed a few parts of the table.

So this is a powerful no nonsense professional power tool. But unless you are driving steel screws in the concrete wall or constructing your house, this may be useless for you for day to day light projects.

This baby is is priceless!
The Milwaukee drywall screwdriver is a priceless tool if you've got a job bigger than 1 sheet. The depth settings are convienient and have good granularity of adjustment. You may have to try a couple of brands of bits however. I've found that the bits with ridges on the blade faces work best. They allow you to be slightly off 90 degress (perp. to the wall surface) without camming out. The rubber finger grips on the top of the Milwaukee make it comfortable to handle. It's well balanced and powerful. It takes a few practice screws to get the hang of it but it's by all means worth the (money). You'll use it every chance you get! ... Read more

Features

• Limited warranty
• Powerful 7.0 amp motor, 0 to 2500 rpm, variable speed control
• All metal grip-lok 2-sleeve keyless chuck for a stronger hold on the bit and all metal gear case and diaphragm
• 360 degree locking side handle
• Ergonomic tactile grip and two finger trigger for user comfort and balance

Features

• Eliminate driving plates and prevent drive pin holes from elongating
• This handy kit covers most everyday hole drilling needs
• Super tough bi-metal, 3/16-inch thick
• Teeth electron beam welded to a steel body
• Less vibration/shatter resistant

Product Description

Super Sawzall blades are made with Matrix II high speed steel teeth containing 8 percent Cobalt to keep a sharper tooth edge longer. The tough Bi Metal design allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long life blades are the goal of every blade we make. This blade has a 1/2 inch universal tang that fits all Sawzalls and standard competitive saws. 18 TPI, 6 in. Length, Bi Metal Construction 1/2 in. Universal Tang fits all Sawzalls 50 blades per box For cutting metal 1/8 in. thru 3/16 in., conduit, tubing, channels, and pipe. ... Read more

Features

• Limited warranty, 30-day no-risk trial
• Free floating pad with random pad rotation creates a swirl free finish
• 100% ball bearing construction
• Engineered to reduce vibration
• Dust pick-up with collector bag provided

Reviews (2)

An awesome little sander
I bought this sander about 8 months ago to replace an old Makita pad sander. I've used it frequently and have had excellent results. It starts very smoothly, runs quietly and virtually vibration-free and does a great job with all grits and on every surface I've used it on. I've used it all types of wood and even some metal. It leaves no swirl marks, even when pressing down hard. About the only minor issue I've found with it is that it gets pretty warm right on top where your palm rests. It's not a big problem and it's really just a very minor annoyance and doesn't detract from the sanding capabilities in the least. This is a great little addition to any serious woodworker's shop.

Piece of JUNK
I probably had less than 30 minutes use of this thing before knowing it was junk. I wrote a note to Milwaukee about it and they offered to fix it. Not what I wanted because I knew alrady it was never going to be good. But sent it in and they put $45 in parts. Believe it or not but since I have used it hours and still hate it! But has not given any more mechanical problems. Only worst engineered tool Milwaukee probably ever made. I don't think any other random orbit sander has no brake system! I used a De Walt many hours before buying this thing and only reason for not buying De Walt is that I don't like their products. Biggest mistake yet! I recommend the DE Walt! ... Read more

Product Description

The Milwaukee 0719 Cordless V28 Sawzall Reciprocating Saw uses a high powered Milwaukee built motor to deliver faster cutting and performance. Powering the 0719 is the revolutionary 28 Volt Lithium-Ion battery pack, exclusively from Milwaukee. The 28 Volt battery pack weighs less than an 18 Volt pack, yet delivers two times the run-time, making this the ideal solution in cordless reciprocating saws. The battery is positioned so that it does not interfere with plunge cutting capabilities. This Sawzall® saw has a 1-1/8 in. stroke length that delivers speed. The variable speed trigger delivers two levels of speed range: 0-2000 spm for metal cutting and other hard materials and 0-3000 spm for cutting in wood and other materials encountered. The gear protecting clutch protects the tool against impact, delivering on the legendary Sawzall durability. The keyless shoe adjustment allows for better control in cutting and longer blade life. The Quik-Lok blade clamp makes changing blades a snap. A comfortable non-slip soft grip handle provides a better gripping surface and reduces vibration and operator fatigue.Includes two 28V batteries, 1-hour charger, carry case and two Super Sawzall Blades. ... Read more

Features

• Revolutionary 28 Volt Lithium-Ion Technology
• 0-2000/0-3000 SPM for metal or wood cutting
• Quick-Lik Blade Clamp for quick tool-free blade changes
• Gear Protecting Clutch for extreme durability and Keyless Shoe Adjustment for quickly adjusting blade depth

Features

• # 8 Decking Screws
• 2-1/2 inch Coarse Thread
• # 2 Square, Flathead
• Screw Coating Silver Kylan

Product Description

2" Diameter 4.5 Amp Model 5192 21,000 RPM. For mounted wheels and points up to 1-5/8" reinforced wheels up to 2". ON/OFF toggle switch. ... Read more

Features

• Length (inch): 13-1/2.
• Net Weight: 4-1/2.
• Collet Size (inch): 1/8+ - 1/4++.
• Amps: 4.5.

Features

• 360° locking side handle
• Powerful 8.0 amp motor, 0 to 850 rpm, variable speed control
• Grip strength – exclusive, all metal ratcheting chuck with carbide jaws has the highest grip torque on bits
• All metal gear case and diaphragm
• 8 ft. 3-wire Quik-Lok® rubber cord for easy storage and field replacement

Features

• 1.7 amp/hour battery pack
• Compatible with all Milwaukee 14.4-volt power tools and accessories
• One year warranty

Features

• Limited warranty, 30-day no-risk trial
• Powerful 2.25 hp, 13 amp motor
• 7-inch or 9-inch capacity; 5,000 RPM; AC-DC
• Spiral bevel gearing for performance and durability
• Sander may be converted to grinder by using the proper wheel guard

Features

• Extend your reach a full 12 inches
• For Selfeed bits, auger bits and hole saws
• Fits three-jawed chucks, 1/2-inch drill capacity and larger
• Also fits 7/16 inch Quick Change chucks

Reviews (1)

EXTRA Reach !
These extensions are A REAL HELP in re-wiring old houses & a big help on any construction site. When you have a NEED to reach a hard to reach location to install a needed hole - this can be the ANSWER to the issue to be a easy job. This can turn a big job into a easy-happy part of the day to enjoy. Work can be fun when you have the correct tools. Yes, work can be fun. The correct tools cut down on drag time & increase profit for the work done & bring compliants from customers. ... ... Read more

Product Description

Single-Speed Cordless Screwdriver Only - This cordless 190 RPM screwdriver has a convenient, two-position handle, forward/reverse button, switch lock, six-position clutch, torque to 22 in/lbs; uses standard 1/4" Hex bits. Includes: Single-speed cordless screwdriver, 2.4V battery pack and 120VAC one hr. charger. 9" OAL. ... Read more

Features

• 6539-6

Features

• Improved balance with reduced runout
• Flat surface shanks for secure chuck grip
• Removable and replaceable feed screws
• 1-inch diameter

Reviews (1)

pricey, but works great
This is an expensive way to drill a hole, but it works great. It cuts fast and really is self feeding once it digs in. Plus it can be resharpened. If you have a lot of holes to drill use one of these paired with a high torque drill-much better than spade bits, which quickly wear out or hole saws, which can bottom out after a couple of inches. I like the Dewalt self-feed bits slightly more because they have two cutters and seem to work a little faster with less effort. ... Read more

Product Description

Milwaukee 49-56-0230 Milwaukee's Heavy Duty 4/6 Hole Saws feature a multiple tooth design with varying tooth sets and gullet depths. The deeper gullets provide more efficient chip clearance with less heat build up thus requiring lower feed pressure - ideal for high RPM portable drills. These Hole Saws are constructed with a minimum 3/16 inch thick steel back resulting in a more durable, longer lasting hole saw. Made of Bi-Metal construction, the high speed steel teeth are electron beam welded to the high alloy steel body. Containing cobalt, the teeth are ideal for both wood and metal applications. Milwaukee Hole Saws provide an economical means of creating up to 6 inch holes for the general construction, plumbing, electrical, maintenance and remodeling industries. Select proper arbor size depending on the drill being used. One per package. Product Features 1-7/16 in. depth of cut Aggressive cutting 4/6 tooth design Sturdy 3/16 in. thick steel back ... Read more

Features

• 4-1/2 in. (114 mm) diameter
• 1-1/2 in. depth of cut
• Aggressive cutting 4/6 tooth design
• Sturdy 3/16 in. thick steel back

Product Description

Hole Hawg, Designed For Drilling Between Studs & Joists, 1/2'' Capacity, 7.5A, 300/1200 RPM, Heat Treated Gears, All Ball & Roller Bearings, Triple Reduction Gearing Handles Up To 4-5/8'' Self-Feed Bits. ... Read more

Features

• Hole Hawg, Designed For Drilling Between Studs & Joists, 1/2'' Capacity, 7.5A, 300/1200 RPM, Heat Treated Gears, All Ball & Roller Bearings, Triple Reduction Gearing Handles Up To 4-5/8'' Self-Feed Bits.

Reviews (2)

POWER!!!
I use my Hawg on a daily basis, and if you respect its power and use it like a human being, you won't lose any teeth. The Hole Hawg is the standard in right angle drilling for a reason...extreme durability and big time power and torque. Not a stud in the world that can stop this drill, but remember, be careful or the power will bite you.

24 Years Old and Still Losing Teeth
I have recently switched from the DeWalt Timberwolf to the Hole Hawg because my friends told me to. I have since hung it up and lost two teeth and fell off my ladder. I thought this thing had a safety clutch like the DeWalt. Also, I can't get any leverage with the short body of the Hole Hawg. I am going to lose the Hole Hawg and keep my remaining teeth. ... Read more

Features

• features a hex-shaped shank that delivers more torque and won't spin in the chuck
• For self-feed bits, auger bits and hole saws (1 inch diameter and larger)
• Designed to fit Milwaukee Selfeed Bits, Auger Bits, and Hole Saws, 3-jawed chucks, and 7/16-inch Quick Change chucks

Features

• For all types of construction
• large, wide throat design
• Self-feeding screw point
• Diameter 3 in.

Features

• Original Mossy Oak pattern
• Heavy Duty Sportsman?s Bag
• 21 pockets to hold tools and gear
• Shoulder strap for ease of transport