Amazon.com

If you're looking for a quick, easy and reliable way to carry tools and small parts on the job, the Bucket Boss Super Chute is a good choice. Six large interior compartments will keep your small parts (nails, brads, screws, etc.) organized, while 12 outside pockets allow you to carry just the small tools you need to get the job done. The bag is made of rugged, 600 denier fabric that stands up to the rigors of any work site. It's strung with parachute cord, so it automatically cinches closed when lifted off the ground. And it's designed to stack three or four deep in a five-gallon bucket, for easy transportation. A flat bottom protects against accidental spills and allows the bag to rest comfortably on any work surface, keeping everything handy and safe.--Carl Thress ... Read more

Features

• Black and yellow fabric
• Six interior compartments
• 12 exterior pockets
• Flat bottom prevents tipping or spilling
• Works with any five gallon bucket

Reviews (4)

Holds up under fire
I purchased three bags about two years ago.I liked them because you couldn't tip them over. Alot of guys in my company were also using them. Unfortunately, a house I was working on burnt to the ground and took my van with it. When I went back to the site the next day to make a list of matl's for the insurance company, I noticed the bags had their carrying strings burnt off and had fallen from their hooks upside down on to the van floor. I turned them over to find them sealed tight from the heat, with almost all contents intact. Unuseable now, but they did their job right to the end!

Super useful
I have a number of the original Bucket Boss chutes, so when I saw this unit with the external pockers- a natural extension of the idea- I picked up a couple at the local home store.

I'm not a builder, but I've worked with crews on my house and done a fair bit of repair and addition of small built-ins. Like anyone who's done this sort of work, I have accumulated large amounts of screws, nails, wirenuts and other hardware in various sizes that I need a handy way to carry. Three or four of these (depending on what's in 'em) will fit in a joint compound bucket and provide an excellent way to organize and carry small parts.

I've got two filled with different sizes of deck screws, one with biscuits for the biscuit joiner, one with wire nuts, cable staples and other electrical items, one with nails and a few more with different screws, nuts, washers, screen door hardware, fuses, and other things I can't even remember. It's a great system.

The Bucket Boss System really gets the job done
The best way to get into the Bucket Boss Super Chutes is to explain it is part of a system. The super chutes handles the misc parts. The other part of the system is the Bucket Boss 56, which handles the tools. Each one, can also be used to do a little of the other.
Super Chutes is great. I no longer find myself looking for that box of screws, or having to run back out to get things out of the vehicle. Also, if I am low on something, it is immediately apparent. The material, it is made out of, is super durable, and I am sure it will last, for a long,long time. Pick up one or more of these, and a 56 Organizer for your tools. The organization will pay for itself in no time. Get the Boss and watch your productivity zoom!

Intelligent Design, Well Made
I'm a homeowner. I remember seeing our electrician with a few of these several years ago, so I finally got around to getting one. They sit on a ladder shelf easily and securely. You can pick em up, toss em around. Reaching in the large compartments to get nails, small parts, etc is easy. I used to use a nail bag you tie around your waist. This is much better. Most of the time I don't need to wear a cumbersome tool belt.The bag is well built with good materials. PLUS Bucket Boss / Fiskars have a no questions asked warranty for the LIFE of the product. Just make sure to cut out the warranty card on the box and mail it in. Plus outside pockets for small tools and what not. ... Read more

Features

• Made in USA
• 4 compartments for organizing nuts, bolts, screws, nails and more
• Includes a drill bit sizer, pencil holder, and measuring rule
• Stacks 4-5 deep in any 5 gallon bucket
• 4 piece kit

Reviews (2)

Let's Get Organized !!
This set of four stacker system, with four compartments each, has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

Better yet, when I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

I do have to watch the amount of hardware I put in the containers. Too much weight tends to make them a little "too flexible" and difficult to handle.

A great "investment" and time saver for me.

smart idea
Each time I need to set up a new truck or trailer I put together 3 of these sets. 1 for fastners, 1 for electrical, and 1 for plumbing. They keep the truck well organized and save me the lost time of having a man run to the hardware store for a few inserts. They are one of the best ways I have of keeping supplies on hand. If I could change anything about the tray it would be to have a tray divided into 6 sections for smaller parts. ... Read more

Features

• Made in USA
• 44% more capacity than traditional Bucket Stacker
• Organize washers, wire nuts, bolts, etc
• Fits in standard 5 gallon bucket
• Includes a drill bit sizer, pencil holder, and measuring rule

Reviews (1)

Great Organization
This "Super Stacker" container is a little larger than its yellow cousin. The four compartments has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

However, I do have to watch the weight of the items in the compartments. It is very easy to overload the entire bucket when you put several of these together.

When I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

A great "investment" and time saver for me. ... Read more

Features

• Made in USA
• Four compartments for organizing nuts, bolts, screws, nails and more
• Includes a drill bit sizer, pencil holder, and measuring rule
• Stacks 4 to 5 deep in any 5 gallon bucket
• High visibility yellow

Reviews (3)

It's Organization
This set of four stacker system, with four compartments each, has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

Better yet, when I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

A great "investment" and time saver for me.

Ingenious pieces of plastic
Although I am not too fond of the price that Bucket Boss is getting for these handy trays, I own about half a dozen of them. That's because they work so well!

The other reviewer pointed out the weight problem when over loaded. This is very true.

My buckets usually sit in my storage building full to the brim with assorted yet sorted fasteners. I can find what I am looking for rapidly by just lifting the stacking trays one at a time and giving a quick glance.

Very good system, just be careful
These plastic trays are very durable, and downright ingenious. The only thing is that if you get a whole bucket filled with trays, and all the trays filled with screws, nails, bolts, etc; the bucket will be incredibly heavy for the average person. If it is to stay stationary in your shop or garage, it is the perfect thing for you. If you plan on adding the other outside bucket tool organizer, and filling it with tools, with the full trays inside, and are going to work out of it, plan on one heck of a load to haul. Just consider this before you go off and make a purchase. Other than that, bucket trays will provide years of durable service, and save hours of time in some cases in looking for the perfect fastener, or craft item (yes, the whole family can use them for many purposes). ... Read more

Features

• Ripcord closure system
• made from 600 denier polyester

Features

• 1680 denier fabric - Will wear forever.
• Rubber reinforced pockets - Holds all contents secure.
• Built-in Dust/Security Cover - Keeps the elements out.
• Junk Drawer - Great for storing all those odds and ends.
• Eyeglass Pocket - Protects and keeps them where you can find them.

Features

• 4 nesting stackers, bucket, and bucket seat
• Organize screws, nuts, bolts, etc.
• Bucket seat is air cushioned
• Made in USA