Features

• Rubber reinforced bottom - will stand upright & strong enough to carry a heavy load
• Carry it three ways - on your belt, over the shoulder, or with the carry handle
• Cell phone pouch keeps the phone close at hand.
• 1680 denier fabric - will wear forever

Features

• Pouch measures 9.75 in. x 5.75 in.
• Beefy stainless steel belt clip
• Built from abrasion resistant fabric
• Rear padded and reinforced pouch, four front pockets
• Clip loop for a tape roll, keys and its snap loop

Reviews (14)

Best for small tools.
Great tool carrier. I put it on when I start work and leave it on all day. So comfortable I forget to take it off. Not bulky or heavy. Keeps hand tools handy without putting on another tool belt.A lot of pockets for such a small thing.

Held up well for mechanic!
It's a great item for my mechanic husband, it saves his pants pockets from getting holes in them from his wrenches & screwdrivers. It took him a couple of days to get used to it, but now wears it every day at work. UPDATE: my husband wears this daily at work, filled with his tools. No area showed any sign of wear after 2 years of constant use. His screwdriver finally wore a hole through the pocket and we purchased another one. Got a great 2 1/2 years of use out of this!

electrician
Im a service electrician, so i do small jobs all day long and in between im in the truck driving to the next job ,so i put tools on, put tools away all day long. I got tired of putting holes in my back pockets by carring screw drivers ect.. my regular tool pouch is big and hangs on my belt so it was too much of a pain to undo my belt when i arrive and then again when i leave. This baby solved that problem. I ended up using it in my front pocket, more comfortable and excessable. It did wear out in 8 mo.'s so im ordering a new one. if they beefed up the bottom of pouch so screwdrivers wouldn't eventually pop through i'd give it 5 stars.

I like the pouch but it wore out too fast
Excellent pouch for electricians who usually put there pliars & screwdriver in back pocket. You can fit pliers,strippers,2 screwdrivers& tester. Downside; it only lasted about 6 months.

great pouch
I do lots of low voltage wiring. It's great to just stick it in your rear pocket which makes it very handy. I only wish they'd make the same item with more storage pockets. Instead I had to buy 2. ... Read more

Features

• Pouch measures 11.5 in. x 8.5 in
• Beefy stainless steel belt clip
• Abrasion resistant fabric
• Holds layout square, pencils and small tools
• Reinforced pocket edge will hold a clipped on tape measure

Reviews (3)

Solves a problem very well
Most pouches don't come with a good place for a square and the darn things are always falling out or poking you in the ribs or something. This scabbard is well made and clips onto a pants pocket with a metal clip or it can be slid onto the belt using the loops on the back of the scabbard. The extra pouch and pencil slots are nice too. The material looks nice and is very resistant to wear, damage and fluids. I heartily reccomend it if you carry a sqaure often.

End user in mind.
After getting tired of scraping knuckles in a large pouch, tearing holes in pants pockets, and trying other products, I have found a product that works. The scabbord does just what it says. A left handed model would make this a 5 star product. It's functional, easy to find your square/tape/pencil without having to look all of the time. It's also very durable, a definite PLUS. As a hobbyist, I look for products that will give me a lifetime of service, easy to work with, versitile, and dependable. The Layout Square Scabbord does all of this. I'm very pleased with this product.

Compact and lightweight
Being a do-it-yourselfer, I have not yet invested in one of those "everything" tool belts. Thus far, I have always just stuffed my speed square in the biggest available pocket, and then pushed it out of the way when I needed something else in the same pocket. This speed square scabbard makes all the difference. It is compact and lightweight, yet it is extremely durable. And it frees up some extra space in my tool belt! I only wish that it came in a left hand model (not a big deal, but it sure would be convenient!!). ... Read more

Features

• Holds regular or cordless drills
• Riveted stress points
• Universal to fit most belts
• Left-hand model

Reviews (4)

Best lefty
This is by far the best left-handed holster I have used. The thick padding of the holster keeps the drill securly in place even without the strap. The bit pockets are very handy for pencils(or even screws) as well as bits. Bucket Boss somehow made this durable, comfortable, holster better and cheaper than any other holster I've seen.

Quality Bucket Boss Drill Holster
The strap to hold you drill in has only one position and it needs more to hold all drills securely. A strap with velcro would solve this problem.

txtrapper

Quick Draw
This holster is handy anytime or anywhere you do lots of drilling or driving. It's also great when you're on a ladder and don't have enough hands. It saves time by keeping your tools right there where you need them. I've used it with cordless and corded tools when hanging electrical boxes and running wire through studs, hanging drywall, and siding work. I like the snapping strap to secure the tool when you're busy with something else. It has slots to hold extra bits and extensions, too. However, I found it works best with smaller drills. I tried this holster on my belt with my big 19.2V PorterCable hammer/drill/driver and it about jerked the pants right off me. It wasn't quite big enough to keep that heavy tool from tipping back and out of the holster. Instead, I use it with a large leather tool belt to put around my middle and that worked out much better by balancing the drill while it hangs. At any rate, I now have no trouble with trying to find a place to set my drills and drivers when doing working in difficult places. And the holster is good for holding other tools too. Thanks, Amazon !!

best of its kind
I couldn't find this holster locally, so Amazon was kind enough to accomodate my needs. This is a nice one, Good size for 14 or 18 volt drills, comfortable against the leg, and a nice holddown strap. I especially like the 'extension' on the bottom, which is designed to protect your leg from a bit. Very smart design. Even with a rapid load in the chuck it still protects the leg. Does this company make good stuff or what? ... Read more

Features

• Fits most cell phones
• New black ballistic fabric
• Hooks on any belt
• Cover flap with Velcro closure
• Padded pocket

Reviews (3)

Works like a champ.
Bought this item for dear old pappy. He loves it! Easy in, easy out. When straped in the phone stays put! The large steel belt hook has a serious bit and will not slide off untill you take it off. Now, I need to buy a cell phone for my self and get another one of these for me!

excellent product
another great product from bucket boss. the clip makes it easy to use and take anywhere.

Finally, a decent phone pouch!
This is a functional phone pouch! The phone comes out of the pouch when you need it. Ever try to get one of those clip on pouches on or off your belt when your hands are full or your working? With this one the phone comes right out of the pouch and your not trying to see the buttons and screen through shiny plastic. And the clip is awsome, large enough for almost any belt and made of spring metal with a serious shaped bite! And if your not already familiar with the benefits of black ballistic nylon, it's what modern pistol holsters are made of. This is "The Pouch". Get one! ... Read more

Features

• Pouch measures 6.75 in. x 2 in.
• Beefy stainless steel belt clip
• Abrasion resistant fabric
• 4.5 in. deep pocket
• 2 in. elastic pencil channel

Reviews (2)

Great for Mini Mag-Lite, clip holds tight
Great deal. Received Mug Boss, too. Excellent for pens, tools, and keep things organized.

Great for Mini Mag-Lite, clip holds tight - Bargain at [money]
Bought this sheath for [money]- It is great for holding a mini Mag-Lite. Easy to reach without lifting any flaps. The free Bucket Boss Mug Boss accessory is fantastic. I am very pleased. Great quality at a great price! ... Read more

Features

• Pouch measures 5.5 in. x 7.25 in.
• Shaped for safety glasses
• Easy open velcro top
• Padded interior
• Bellows sides accomodate the largest glasses

Reviews (2)

Excellent for Oversized Safety Glasses
Very Spacious, Overbuilt and Excellent product from Bucket Boss. It isn't one of those silly, flimsy things you get at the eye doctor when you get new prescriptions. It IS too big for only one pair of prescription glasses. But for what it was made for, oversized SAFETY GLASSES, this item is excellent. And actually I place a pair of prescription glasses AND a set of clip on sunglasses to fit them in this pouch. Nice, soft, non scratch interior and rugged BB canvas outside. At the end of the day, I replace those with my safety glasses back into the case.
The metal clip works well on your hip or I also place mine inside my Bucket Boss.
I like my purchase!
John Row

Safety Glasses Pouch
This pouch takes any size of safety glasses, with side bellows and adjustable velco closure. Completely padded on the inside, your glasses will never get scratched. I don't use the belt clip, instead I push it onto one of the outside pockets of my tool bag. The stainless steel clip is so deep and so strong, it doesn't get pushed off like my tape measure which is constantly getting left behind. It looks great, too; matches my Pro GateMouth bag. The negatives - If you use small (prescription?) safety glass, the pouch is way too big, and I think [the price] is too expensive. ... Read more

Features

• Small pouch to hold a variety of hand tools
• Designed for use with Bucket Boss work wear
• Great for trades that don't require a full tool belt

Features

• Holds utility knives
• Plastic reinforced bottom to prevent tearing
• Designed for use with Bucket Boss work wear

Features

• Right-hand model
• Holds regular or cordless drills
• Four pockets
• Drill retention strap
• Padded extension to protect leg

Reviews (7)

Won't work for T handle or small drills
although the construction is impecable the holster really needs a leg belt to stay stable, also the pouch will not work well with t handle drills like a milwaukee, or small drills like 7.2 volt B&D. works greak with dewalt, but thats it as far as i can tell, better off buying the hook...

Perfect complement to the Bucket Boss tool belt
I recently reviewed the Bucket Boss Builder's Rig, and was overwhelmed with the versatility and comfort of their tool belt. The Drill Holster is a natural addition to the tool belt, and easily slips on the belt in place of (or in addition to) any of the pockets on the belt.

This holster fits my Porter Cable 14.4 drill with NO problems, and the balance is darn near perfect. Kudos to Bucket Boss for providing a bit of padding on the inside of the pocket as well.

Check my other reviews on the Bucket Boss lineup, and try it for yourself. I'm sure you'll like it!

Bucket Boss Holster 1st
I like everthing about this item. I was especially pleased with the small pockets, how convenient to have your bits and some screws at your side. I do, however, wish this holster had a leg strap. It tends to roll backward somewhat. But, would I buy another one, you bet I would. Thanks, Dennis Odom

A great tool belt accessory
Lightweight and effective. Works very well with drills up to 14.4 volts. Larger drills do not balanced well. If you use your drill on a regular basis, you will like having this holster.

The best holster you can buy
I agree , this is better than any other available holsters. It does protect your leg. Thats in itself makes it superior. In addition you get extra storage in the side pockets. Kind of like having a mini bucket boss right there in front of your tool bags. It's still not secure enough for me though. I hate when my drills take a dive. They get dropped enough as it is. Who has the patience to strap a drill in every time they use it? I've been on a lot of jobs and have seen hundreds of drills in holsters. I've seen about two that were actually strapped in.The only holder I trust completely is the Prazi Big Lugg. It is far superior for keeping your drill stuck to your side. Just drop it in and you're good to go. Bend over, lay down , jump , It doesn't matter. It's still there. Impossible with a holster. So I have mixed feeling about this product. It is the best in it's class. But I think that class is losing favor with the Big lugg on the market. ... Read more

Features

• Pouch measures 8.75 in. x 3.25 in.
• Beefy stainless steel belt clip
• Abrasion resistant fabric
• Plastic reinforced pocket designed
• Additional 2 in. elastic pencil channel

Reviews (1)

Good sheath!
The belt clip is convenient and it easily holds larger utility knives. I primarily use fixed blade knives and find this sheath to be especially handy. The pencil holder is a nice touch. ... Read more

Features

• Padded pocket
• New larger size to accommodate most cell phones and two-way radios
• Cover flap has Velcro to secure closing
• Measures 6" x 3-1/2"
• Clips on any belt or tool belt

Features

• Carries a 35-foot tape or a load of nails
• Designed for use with Bucket Boss work wear

Features

• Designed to fit snugly in the Bucket Boss Tool Vest pocket
• Holds a load of nails, screws, wire, etc.

Reviews (1)

perfect
It works exactly like it says. Fill it up and grab as you need! ... Read more

Features

• Designed to work with the Bucket Boss Tool Vest

Features

• Padded to protect your leg
• Tall pocket holds several full clips
• Shorter pocket holds shorter clips
• Fits contractors and builders rigs
• Made from Cordura Nylon

Reviews (3)

Handy nail carrier
This accessary makes using my nail gun even better. Holds plenty of nails. When I first recieved it I was surprised at how big it was but I soon learned that it is good to have the capacity it does. I recommend this to anyone who has a framing nailer.

larger
It was larger than I thought it would be. I dont have a gun that needs that large of nails.

make that nail gun smoking hot.
This is great, holds enought nails to make my belt heavy.

There are more nails right there when you need em so you can stay up that ladder and keep that gun working. ... Read more

Features

• Pouch measures 7 in. x 4 in.
• Beefy stainless steel belt clip
• Abrasion resistant fabric
• Two 4.5 in. deep pockets
• Two elastic channels

Reviews (2)

Great Drywall Aid
In addition to the drywall screw bag, you always need your pencil, razor knife, phillips screwdriver and black marker. This handy sheath hooks to the front of the screw bag or onto your belt to keep these items at your fingertips. Really worth
the cost!

Good option
For those who hate velcro, this is a great option to carry the "multi-tool/mag-lite" combo. The addition of the pen loops is an added bonus. The clip is also really nice as you don't feel like it's going to break like similar tool-packs with plastic clips, and it's easy to get onn and off your belt.

Durable and cost effective, overall a solid product. ... Read more