Features

• Adjustable footplate
• Variable speed
• Clic blade change system
• High efficiency 5 amp motor

Reviews (1)

Best Jig Saw on the Market!
I kid you not, this thing is AWESOME!!! I bought it to cut some curves in 7/8" Black Walnut and it cuts it like warm butter with a hot knife! I mean to tell you, this saw is great! ... Read more

Features

• Powerful 5 amp motor
• 18,000 rpm no load speed
• Convenient chip eject directs shavings left or right
• One-year warranty

Reviews (1)

Great deal on a planer
I have used this planer primarily on doors in my house. In particular, I've found it long enough to get the start and end of the edge planed without "clipping" the edge. I'm not an expert door-hanger -- but it has easily paid for itself in saved labor costs.

A few words of advice on (interior doors). Plane when your house is MOST humid (usually in the summer) as the doors expand and you want them to close easily when they are most expanded. Be sure to plane an extra 1/64" or so to allow yourself a gap for a primer and at least one if not two finished coats of paint on the side edge of your doors. As for the tops and bottoms, leave them unpainted to allow the wood to dry if they are new doors, otherwise, a matching primer is more than enough and you need not bother with a finish coat of paint. Unless your doors is really badly off, you will not need to re-seat the hardware, but be prepared to if necessary. But before you start, make sure all of your hinge plates are on tight. No use taking a plane to a door if the problem is not the size of the door, but loose hingest. If so, replace the hinge screws with longer ones, and be sure to pre-drill the holes first to prevent cracking the door or jamb wood.

This tool beats hand planing allowing you to complete a door in just a few minutes. It will take you more time to get the door off and remove the hardware than to plane the edges. Adjustments are easy. I found this tool to be almost identical to the Makita planer which I borrowed prior to purchasing this one. ... Read more

Features

• Circular Saw has a 50 degree bevel.
• carries a 1 year warranty
• Drill/Driver 1/2" single sleeve chuck
• Drill/Driver 0-450RPM/0-1,500 RPM
• Drill/Driver Over 425 inch pounds of torque

Product Description

Includes (2)--2.4A-h Batteries, (1)--1 Hour Charger - BC004, (1)--Rip Fence, (1)--Mag Bit Holder - 2610917319, (1)--Side Handle - 2602025126, (1)--Bit Case - 2610915997, and (1)--Carrying Case - 2610917460. ... Read more

Features

• Auxiliary handle
• BOSR9
• 18Volt
• (2) 2.4a-h batteries
• 1 Hour Charger

Product Description

DWM40ML Digital Protractor ... Read more

Features

• Versatile measuring tool, 4 tools in one - Anglefinder, compound cut calculator, protractor, level
• Anglefinder - Determines the exact angles of jobsite or workpiece, eliminating guesswork
• Compound Cut Calculator - Automatically determines the exact miter and bevel settings
• Protractor - Precisely positions the workpiece or intended cut line at the desired angle
• Level - Built-in vertical and horizontal spirit levels, accurate to 0 +/- 0.05°

Features

• Powerful 5 amp motor, 500-3100 SPM
• Tool-free blade change system - For fast and easy blade changes
• Exclusive multi-directional blade clamp mechanism - For superior blade hold
• Low-vibration design - Ensures extremely smooth operation
• Factory Reconditioned at the Bosch National Reconditioning Center; Includes a One Year Warranty

Product Description

Includes (2) -- 2.0A-h Batteries - BAT040, (1) -- 1-Hour Charger - BC004, (1) -- Carrying Case - 2610915780, (1) -- Bit Holder, (1) -- Bit Case - 2610915997, and (1) -- Snap Hook. ... Read more

Features

• Brute Tough design - Tool performs after repeated 1-story drops when all other competitors fail
• Steel reinforced collar - Enhances durability and protects tool when dropped on the chuck
• Unibody powertrain - Maintains alignment between clutch, gearbox, and motor
• Dura-shield housing - Constructed to withstand real world conditions
• Factory Reconditioned at the Bosch National Reconditioning Center; Includes a One Year Warranty

Features

• Aluminum roll cage protects the unit from a 10-foot drop
• Jobsite radio/CD Player with anti-skip technology; MP3 and CD-R/RW compatible
• Integrated antenna eliminates antenna bends or breaks
• 4-way GFCI power outlet to easily power-up jobsite tools and equipment and a 12V DC outlet ideal for charging cell phones
• Charges--and runs on--Bosch 12- to 24-volt batteries

Product Description

Includes (2) -- 2.0A-h Batteries - BAT040, (1) -- 1-Hour Charger - BC005, (1) -- Carrying Case - 2610915781, and (1) -- Bit Holder. ... Read more

Features

• Compact Tough design for increased maneuverability in tight spaces and less user fatigue
• Dura-shield housing - Constructed to withstand real world conditions
• High torque mode produces 300 in./lbs. of torque; high speed mode generates 1,200 rpm
• Ratcheting, single sleeve 3/8" chuck - For one-handed operation
• Factory Reconditioned at the Bosch National Reconditioning Center; Includes a One Year Warranty

Product Description

includes RS5 Reciprocating Saw ... Read more

Features

• 9 Amps
• 360° scroll collar - Allows user to get into hard to reach areas
• Quick change blade system - Easily changes blades with no additional tools
• Saw hook - Convenient saw storage between cuts
• Variable speed trigger - Easily control the rate of cut

Product Description

includes 1617 Router, 1/4" S. R. Collet Chuck -- 2 610 906 283, 1/2" S. R. Collet chuck -- 2 610 906 284, 16mm Shaft Wrench -- 2 610 991 388, Collet Nut Wrench -- 2 610 992 417, Tool-Free Template Guide Adapter -- 2 610 991 370, 10 ft. flexible rubber cord, Chip Shield -- 2 610 991 389 ... Read more

Features

• 2.25HP /12 AMP Motor 8,000-25,000 RPM - Most powerful in its class
• Variable speed dial - For matching speed to workpiece and task
• Coarse and microfine bit depth adjustment system with resettable depth indicator
• Tool-free template guide adapter - For fast and easy template guide changes

Product Description

Includes Medium Backing Pad -- RS031, Pad Wrench; 5mm Hex -- 1 907 950 006, and Microfilter Dust Canister -- RS025. ... Read more

Features

• 2.0 Amps, 12,000 RPM - For fast, smooth finishes
• New microfilter dust canister with integrated paper filter
• Random orbit sanding - For aggressive stock removal and swirl-free finishing
• Multi-purpose tool featuring eccentric orbit plus rotation - Duplicates natural hand sanding action
• Factory Reconditioned at the Bosch National Reconditioning Center; Includes a One Year Warranty

Product Description

includes 1617 Router Pack, Motor -- 16176, Plunge Base -- RA1166, Fixed Base -- RA1160, 1/4" S. R. Collet Chuck -- 2 610 906 283, 16mm Shaft Wrench -- 2 610 991 388, 24mm Collet Nut Wrench-- 2 610 992 417, Tool-free Template Guide Adapter -- 2 610 991 370, 1/2" S. R. Collet Chuck -- 2 610 906 284, Fixed Base Chip Shield -- 2 610 991 389, Plunge Base Chip Shield -- 2 610 912 599, Carrying Case -- 2 610 913 367 ... Read more

Features

• 2.25 HP / 12 amp motor; 8000-25000 RPM - Most powerful on its class
• Variable speed dial - For matching speed to workpiece and task
• Soft-start - Reduces start-up torque
• Quick clamp system on both bases for fast tool-free conversion - Move motor from base to base
• Exclusive precision centering design - Makes it easy to keep bit on intended cutline

Features

• 3 jaw chuck
• Incudes-zipmate attachment, 3 cut-off wheels, 3 zipbits, zipbit case, soft tool bag
• Quick release detachable handle
• Soft grip body
• Plastic adjustable foot

Features

• Lock-on button for continuous operation
• Eccentric orbit plus rotation
• All-bearing design
• Adjustable front handle
• Variable speed

Reviews (1)

Great Sander - superior dust collection - bargain price!
Having been VERY disappointed with the performance and long-term quality of the Black & Decker, Porter Cable & Dewalt versions of this machine, I thought I'd try this reconditioned unit.
It is GREAT! Very quiet and smooth running with really exceptional dust collection, I am VERY impressed. It has no tendency to "spin-up" at all and the dust collection is nothing short of amazing. The only shortfall I can find is the need to remove the front handle to sand close to a vertical surface with the front of the machine.
At the price of a mediocre, inferior product, it is an irresistable bargain if you need one.
I certainly look at Bosch tools with a new found respect. ... Read more

Features

• Auxiliary handle
• SDS-plus
• 4.4 amp
• Dual mode
• Variable speed trigger

Features

• 1 Hour Charger
• Carry Case
• 24 volt
• Dual Stroke 1 1/4" & 3/4"
• (2) 2.4A-h Batteries

Product Description

includes 1294 Sander, Polishing Pad -- CS015, Extension Pad -- 2 608 000 200, Narrow Extension (Oval) -- 2 608 000 198, Regular Plate -- 2 608 000 174, Carrying Case, Narrow Extensions (Flat) -- 2 608 000 199 ... Read more

Features

• 2.6 amps, 13,000-19,000 OPM - Ensures fast, smooth results on all surfaces
• True finishing sander motion with no arcing or pivoting, provides uniform sanding
• Tool-free pad changes makes pad changes quick and hassle-free
• Low vibration design engineered for smooth running and operator comfort
• Ergonomic soft-grip top designed for comfort

Features

• 1 Hour charger
• Carry bag
• 14.4Volt
• Compact Tough
• (2) 2.0A-h batteries

Product Description

Includes (2)--2.4A-h Batteries -- BAT026, (1)--1 Hour Charger -- BC004, and (1)--Carrying Case -- 2 610 999 507. ... Read more

Features

• Tool-free blade change system for quick, easy blade changes
• Soft grip handle is easy on the user
• Variable speed trigger from 0-2300 spm
• Dual stroke 3/4" for fast aggressive cuts or 1-1/4" for plunge and precise cuts
• Tool-free push-button foot adjustment