Features

• Extends 18 inches
• Stores flush to table

Reviews (1)

outfeed support
The outfeed support is a handy thing to have on a table saw. The only problem that I have encountered in useing it is that flexible materials like thin plywood tend to flex between the saw and the outfeed support and hit the support instead of going on top of it. This problem can be fixed by using a peice of scrap as a 'brige' to help the material make it onto the suport. ... Read more

Reviews (2)

Fits perfectly
I too had dificulty obtaining this case. I waited and waited but eventually found it. It was worth the wait it fits perfectly and has shown to be quite durable so far.

You mine as well get it...
The miter finder is such a fine crafted instrument that you just have to get the case for it. I mean you wouldn't want to scratch or otherwise damage this precision tool; would you? This case fits the unit like a glove (quite literaly) and has two pockets for the leg extension (mine as well get that too) and instructions. The case is padded and made of black nylon. The Bosch insignia is located in red on the enclosure. Amazon really should include a picture though it can be found on the Bosch WEB page. What a nice piece of kit...Just get it! ... Read more

Features

• 4-inch overall length
• 10 teeth per inch
• Used in wood and plastic applications
• Very fine cut

Reviews (1)

The Best Jigsaw Blades
For anyone who isn't sure which jigsaw blade to buy, the 101B is the absolute best blade for almost all woodcutting in wood under 1 1/4" thick. It leaves the cleanest cut and is the easiest to use for design cutting of any blade on the market. I've been using them for 13 years and I've tried everything else. ... Read more

Features

• Adds circular cuts
• Makes parallel cuts easy
• Works with jig saws

Reviews (5)

Just plain JUNK
While my Bosch 1587 is quality made and the Bosch saw blades are the best I have used, the optional JA1003 Cutting Guide is a [X] piece of junk. As soon as I got it I pulled the set point out of its holder and one of the cheap plastic lock pins broke. I could make one better than this one. Also its made in China not the US or Germany! Also the instructions are printed in pictures on the cardboard package. There are no written instructions to give the novice usefull hints. If I only paid [X] for it I would say I got what I paid for. My advice is to look for a quality after market cutting guide and stay away from the Bosch.

save your money
I agree with druziligaamazala The (...)thing is plastic!, and is worth about $2.00 and made in china !!!
If this were way all BOSCH tools were made I would not have any .... save your money for a good aftermarket version

The (...)thing is plastic!
Not only is it plastic, it is engraved with metric units of measure. I realize Bosch is a european sounding name, but if they are selling product in the USA they could at least warn you that this is a metric tool. If I wanted to learn the metric system, I would have asked to be born in Germany. If you commonly use inches, you will not enjoy using this accessory. Don't get me wrong, I really like plastic for toys and tupperwear. I think for the money this guide should be of a substantial metal construction.

Certainly worth Owning
This is my second one of these. The first was borrowed ( forever ) by a friend of mine. He used it once, and said . . . it fits great, works well and now I can use the jig saw for more precise cutting and quick jobs without all the measurements ".That really sums it up. You can actually set this guide up on your BOSCH jig saw in easily less than a minute, start to finish. The circle cutout feature is slick but simple. You simply flip the pin over to one side or the other depending on which way you are cutting and it pretty much stays put ( assuming that you press it in place or drill a location hole for the ABS pin )which allows you to cut a consistent circle. It may be nice to have this machined out of a substantial casting or stamped aluminum with darkened numerals, but for the money, it is pretty tough to complain about ( so I won't ). Good, useful accessory, thats been well worth the money time and time again.

Makes quick work of cutting strips and circles
A very useful accessory if you need to cut strips off a sheet of plywood with your jigsaw. Also good for cutting circles. Like other Bosch accessories, it fits their jigsaw perfectly. Also, it snaps into a holder in the blue plastic case that came with my barrel grip saw. My only complaint would be too much plastic. I'd be happier with an all metal unit that would stand up a little better under rough usage. ... Read more

Features

• 5 Pack
• Wood blades feature a super sharp plunger tip for fast, precise plunge cuts
• Developed specifically for composite materials
• Teeth milled and set
• 4-inch length

Reviews (3)

Excellent all rounder - even for hardwood
For the last 9 months I have been searching for a suitable blade for cutting 20mm Hardwood floors, usually Oak or Merbau. I require both a clean, splinter free cut for going across the grain but also a fast cutting blade for cutting along the grain, up to lengths of 2 metres. At last I have found one! The T234X is superb. It gives almost mitre saw quality cuts across the grain and cuts at great speed along the grain. I broke five "regular" Bosch blades this morning, I only used the one progressor this afternoon and it is still going strong. This is the only blade I will buy from now on, I recommend you try it too!

Cut quickly, Cut clean
In my experience, this blade makes a fine, straight, usually splinter-free cut in thick and thin solid wood. I have used it on redwood and pine in various dimensions with great results. I have not personally used it on particleboard or plywood, but if Bosch says that it will work equally well on those, I will believe it. Buy a pack and try it for yourself.

The BEST Jigsaw Blades Ever Made for Wood!
The title of this review says it all. These blades have a separate set of teeth that cut each side of the kerf. You can actually end up with cuts that don't need sanding! These cut through everything I have tried them on like butter. They are particularly good on plywood.

I use them in my Bosch Jigsaw (see that review, also). I suppose they will fit other brands that have a bayonet mount.

If you find a smoother cutting blade, let me know! ... Read more

Features

• 5 per package
• 3-inch length
• 20 teeth per inch
• T-shank blades
• For fine finish, veneers, and laminates

Reviews (2)

Is there another choice?
These are the only blades smooth enough for any kind of finish carpentry. The straight teeth make all the difference in the world. From coping crown to the most extreme scrolling cuts, these blades are perfect! I haven't bought any different blade than these for years. If I can't find them in stock I'll do without rather than buying anything less than the best. If thinking about purchasing jigsaw blades, buy these. The only thing I would like to see from Bosch is the same blade a 1/2" longer. But you can't have your cake and eat it too!

Great blades!
I am a contractor and have been using these blades for years. They make extremely smooth cuts in ALL woods from pine to rock maple...even MDF ... Read more

Features

• 5-pack
• 3-inch length
• 24-tooth
• Metal application

Reviews (2)

Great blades for sheet metal
These blades go great in my Bosch Progressor jig saw when its time to cut sheet metal. For this job, I always clamp the metal down to a piece of scrap plywood then cut through both metal and wood with one of these blades using a mid-range orbital action setting on the jigsaw. By going slow and careful, this produces clean and fast cuts in the sheet metal without the vibration and noise you get when not using a backing material. I wouldn't put anything but genuine Bosch blades in my Progressor jig saw.

Just Did It
Just purchased my second Bosh jig saw not only because of it's endurance and smooth running capacity, but also because no other saw will use these Bosh blades. After 20 years of building I have never used a finer cutting blade. ... Read more

Features

• Laminates
• 5-pack
• 4-inch length
• 10 teeth
• Down cutting plastic

Features

• Cut 13/16 to 2-5/16-inch
• 5-pack
• 4-inch length
• Progressor metal blade
• Teeth milled and side set

Reviews (2)

Great for the first few cuts, but then . . . .
The first time I put these blades in my BOSCH jig saw, I thought how wonderful it was that BOSCH had created a blade that cut quickly, cleanly and slightly filed simulateously. Well, they do but they really only " file " the cut the first few cuts depending on the hardness of metal. I was cutting 1/8" mild ferrous steel and was amazed initially, then just pleased. My opinion is that if you have to make a few* good clean cuts the first time, and can't file/grind or just dont have the time or desire to do so, this is great choice. However, I feel for less money the standard BOSCH metal cutting blades cut just as well, and last a little longer.So these would be a five, if the abrasive edge coating held up a bit longer.

Super Blades for a Super Saw!
I used one of these blades in my 1587AVSP while I was modifying the dash of my '83 Toyota Pickup to accept a new stereo. It cut nice and clean - no filing was necessary. It was also very easy to control while making the cuts. I had to "run the edge" of one side to make the hole about a blade width wider - no problem. I even had to saw through a thicker frame member behind the dash, basically freehand, nowhere to rest the baseplate of the saw. I just hit the piece with the blade at full speed and went right through it, just where I marked it.

These are highly recommended, especially if you run them in the Bosch saw! ... Read more

Features

• Set includes two each of T101B, T119BO, T144D, T118A, and T118B jig saw blades
• T-Shank jig saw blades fit the following brand jig saws: Bosch, DeWalt, Hitachi, Makita, Milwaukee, Metabo, PorterCable and Craftsman.

Features

• Scroll cut
• 5 per pack
• 3" length
• 12-tooth
• Application-wood

Reviews (1)

Just Did It
I just bought a second Bosh jig saw not ony because of their endurance and smooth running capacity but also they are the only saws that run these Bosh blades. In the building business for 20 years and never found a better cutting jig saw blade. ... Read more

Features

• 4", 6-tooth, T-shank blades
• For hard and soft wood, plastics, particleboard 1/4" to 2-3/8"

Reviews (2)

These are scary sharp
The swiss make great knives and jig saw blades! :-) These Bosch blades are swiss made. It is stamped on the side. The instructions tell you to wear gloves when changing blades. I didn't listen, and my finger glanced against the edge, and it created a shaving of my skin. Do I wear gloves when I change bits? No, but I am very careful to grab just the back of the blade.
Blades this sharp make a very clean cut, and will fly through the material. I cut an eight foot piece of MDF with one of these, using a straight waste edge of a sheet of plywood as a guide. It came out so well it looked like a factory cut edge.
Combining these blades with the Bosch jig saw, gives you the best combination in the industry. Highly recommended.

Just Did It
Just purchased my second Bosh jig saw not only because of it's endurance and smooth running capacity, but also because no other saw will use these Bosh blades. After 20 years of building I have never used a finer cutting blade. ... Read more

Features

• Fixed steel stand for Bosch's 4000 10-inch worksite table saw
• Puts tool at ideal work height
• Perfect for workshop use

Features

• Stable, durable, and sturdy
• Sets up in seconds
• Folds for storage
• Universal for all competitor's table saws
• Holds 500 pounds

Reviews (1)

Ripper's last stand
I am a trim carpenter and need to move my stuff around a lot.Over the years, I have tried several job site table saw arrangments ranging from working on my knees on the floor to various cobbled up home made rigs, to a Delta in a Rouseau stand (which was quite nice) But I will now quit looking for a better way! This stand is well worth the price. It has to be the quickest of any I have ever seen to set up.Quicker and easier than the Rouseau You just squeeze the handles and it opens up and locks. You set the saw on and you are in business.Just as quick to take down. It is great for moving from room to room if you need to. It's like having a contractors' saw that you can pick up and run with. The construction is bomb proof, and the saw is rock steady to work on. There is slight lateral movement if you grab the saw and shake it, but in use, I never notice any movement. It is so nice, that I am selling a contractor's saw thatI have in my shop at home, as the Bosch is a nicer saw and this stand just makes it even more convienant to use. If you are spending the bucks for the Bosch saw go ahead and get the stand, they deserve each other ... Read more

Features

• For fast, rough cuts in hard and soft wood
• Also suitable for plunge and curve cutting
• 5-pack for multiple cutting applications
• 6 teeth per inch for fast, clean cuts in hard and softwood
• Application-wood

Features

• Cut 1- 5/16" to 3- 1/8"
• 5-pack
• 5-inch length
• Progressor universal metal / wood
• Teeth milled and side set

Reviews (1)

bosch progressor blades
I do a lot of wood sculptures and without having a band saw i am able to do 5 1/2 inch cuts with these blades using my jig saw. It really does a great job at taking off a lot of wood in a hurry. I couldn't be happier with them. ... Read more

Features

• 7" straight and 10" flush blades for cutting heavy metal
• 5 different blades for a variety of cutting applications
• 2 of each blade for extended jobs
• Heavy-duty canvas storage bag rolls up to fit in toolbox
• 6" and 9" blades for light materials and wood with nails

Features

• Non-ferrous metal
• 5 per pack for less downtime and more productivity
• 4-inch length for cutting non-ferrous metal
• 14 teeth for fast, smooth cuts
• Cut steel up to 3/8-inch for metalwork

Features

• Reinforced body for low vibrations
• Extra wide blade for straight cuts in wood with nails
• BiMetal design for flexibility, longest life and resists breaking
• 2X2 patented tooth geometry for no splintering
• Exaggerated front tooth and taper-back design for easier plunge cuts

Features

• 5 blades per pack
• T-Shank metal cutting jig saw blades
• 3" working length; 14 teeth per inch
• Milled teeth; wavy setting
• Straight cuts in metal, non-ferrous metal, aluminum 1/8" - 1/4"

Reviews (1)

Just Did It
Just purchased my second Bosh jig saw not only because of it's endurance and smooth running capacity, but also because no other saw will use these Bosh blades. After 20 years of building I have never used a finer cutting blade. ... Read more