Features

• Burst of steam button is conveniently located on both sides of the handle.
• Comparable quality pressing to that of dry cleaner
• Large pressing area saves over 75% of the time that conventional ironing would take
• Saves money
• Quick heat up

Reviews (3)

This item is awful!
Do not purchase this. It is a complete piece of junk. It takes even longer ironing with this than it does with a normal iron! You're busy positioning the shirt or pants and then you still need your regular iron for the touch ups anyway. In theory this item is great but in practicality, it is useless.

CRAP! CRAP! CRAP!
The steamer is a piece of crap.The main problem is there was no steam. Give me a break.You may be one of the lucky ones where the steam actually works.But be leery, it looks like Amazon sent me someones elses previous defective order.I can tell by the way the items were packaged in the box.So I'm sending it back.Maybe Amazon will send it straight to you? If you like gambling, go ahead and order.But I'm sending this one back and requesting a full refund.

Excellent Time Saver - Easy To Operate
Despite some of the negative reviews I had read about steam pressing, I forged forward and purchased this item.One common concern among other reviewers was the inability to press dress shirts, without creating crease in the wrong places.I did not encounter this problem. I would suggest you practice placing articles of clothing on the iron prior to starting up. I did this and it worked like a charm.It also cut down my ironing time by 50% or more.The optional steam capability works great.Note, when you use this option it will reduce the temperature of the iron. On the whole it operated wonderfully and created very nice creases(in the right places), on slacks as well as shirts.I will be ordering the optional table, this way I will be able to sit while I press. ... Read more

Amazon.com Review

Cleanup remains the bane of many a woodworker's existence. But times are changing. Gone are the days of loud, clunky vacuums, thanks to the 9-77-25 Turbo III portable vac from Fein. The Turbo III is the strong, silent type, emitting only a low, steady hum as it clears debris from the work site. But don't let its quiet demeanor fool you. The Turbo III is a real workhorse around the shop. As a wet-dry vac, it provides airflow of 125 cfm and static water lift of 105 inches, with a 12-gallon wet and 14.5-gallon dry capacity. But it really earns its keep when you flip the switch to auto, attach your favorite power tool, and let it go. In auto mode, the Turbo III will start as soon as you activate the tool you have plugged into it; no need to turn the vacuum on first or turn it off when you're done. The Turbo III is built tough and is easy to assemble and clean. Solid clamps lock the motor housing securely into place, while an extra-long power cord and protected switches provide added safety in wet conditions. --Carl Thress ... Read more

Features

• 12-gallon wet, 14.5-gallon dry capacity
• Auto start for dust extraction when connected to your power tool
• Delivers 125 cfm and 105 static water lift
• Powerful enough to run two 6-inch random orbit sanders
• Runs quiet at only 57.8 decibels

Reviews (20)

Good, but not entirely as advertised
This seems to be a good vacuum. It's easy to assemble (put the wheels on and attach the HEPA filter) and operate. Good thing, because the manual is poor. The chord and 1¼" hose are nice and long (but can get in the way). Other vacuuming accessories cost extra. The HEPA filter is very expensive, but if you're doing woodwork or sanding, you need a HEPA filter (not available for all shop vacuums). The dust that standard filters let pass is invisible, and dangerous over time. The paper collection bags are also not cheap, but I decided to at least try them to lengthen the life of the expensive HEPA filter and to make emptying the vacuum less of a project. The automatic switch is a particularly nice feature that's not easy to find. It lets a tool you're using turn the vacuum on and off. Among other things, the Fein Turbo II Vac is advertised as being quiet. If it actually put out only 57.8 dB(A), it would indeed be incredibly quiet. The first unit I got was defective. It put out close to 90 dB with the hose on, so I exchanged it. If you get one and it sounds loud, something is probably wrong. In a large, fully carpeted room (i.e., no echo), I measured 3½ to 4 feet from the unit with a Radio Shack decibel meter. Without the hose it put out about 68 dB; with the hose about 72 dB (A and C). This is about as loud as a noisy office, so it's still pretty quiet; but although it's only 1/1000th the volume of my old (90 dB) shop vacuum, it's technically 16 times as loud as advertised. (Due to the nature of human hearing, that means it sounds a bit more than twice as loud as 57.8 dB.)

Great dust collector for my small shop!
I have a small basement shop (10x10) with concrete walls so everything seems loud to me - except this shop vac! It is very quiet. It comes with a long hose that has a 2.25" end that fits perfectly into my Delta 4" belt / 6" disc sander. No more sanding dust! It also comes with an adapter to convert down to a 1 3/8" connection so, with a three inch piece of PVC pipe (99 cents at the local hardware store) I can connect it to my Delta band saw. I also use it with my scroll saw by wrapping plastic tie connectors in a loop around the hose, then hooking the loops onto small eye hooks I attached to the base of the machine. This set-up holds the hose in exactly the right position for dust collection. Finally, I connected all of my tools to a multi-plug surge protector (because I only use one tool at a time) then plugged that into the shop-vac which is then plugged into the wall. This way, the Fein automatically turns on every time I use any tool without me having to change plugs all the time (as I only have one electrical outlet in my shop). Overall, I love this machine!

Very quiet and it can use bags!
I just started using this vacuum and it really is quiet. My previous shop vac was very loud, even with an exhaust muffler added. The Fein is quieter than most of my other shop tools that I would connect it to, and when I am using it by itself its quiet enough that I can still hear the radio.

The bags are expensive, but I really hate cleaning out conventional shop vacs! I tend to cut fiberglass, and also clean up metal working tools with sharp chips, and having to brush that stuff out of conventional filters was a very annoying job.

The suction seems more than adequate for my needs. It is certainly better than my old shop vac.

Quiet and well made!
Boy is it quiet. Did I say it was quiet? And the parts are sturdy: nice hose, latches, casters, etc.

I have been using a cheap, loud vacuum for years and I'm so glad to have this now. With my old vacuum, even though I was wearing hearing protection, the volume was a problem upstairs for other people.

Thanks, Fein!

Almost perfect
I purchased the turbo III mostly because of the claims on how quiet it is. They were right, this machine is very quiet. I don't need to test it with fancy decibel meters or anything, just turn it on and listen, it's quiet. After using it in my shop, my favorite feature is the auto on. I use this little vacuum as a dust collector for every tool in my shop.

The only negative comments I can make is with the packaging. They just stuff the vac inside a box with no filler or bracing at all. Not surprising that it arrived with a broken hose lock, but Fein immediately sent the replacement part. This vacuum does cost alot (about three times as much as my 5hp craftsman), it you need auto on feature and a quiet machine this is the best. If you just need a shop vac, save your money and stick with a Craftsman. ... Read more

Features

• Five year limited warranty on machines, parts and accessories
• 3HP single phase motor
• 3-knife cutterhead, serrated infeed roller, polyurethane outfeed roller
• Anti-kickback fingers, cast iron table with adjustable bed rollers
• Knife setting gage, dust chute and deluxe stand

Reviews (2)

Great Machine
After using a portable planer for about 8 years, I decided to invest a bigger machine. This planer is identical to the DC-380 exept for a different paint job. And it is heavy!I am one of the lucky ones to have a hoist to help unload it. If you don't, have 2 or 3 helpers to unload and set it up. It took me almost two days to get it up and running. I first determined that it was too low for me, so I solved that problem by putting large wooden blocks between the bottom of the stand and the moble base. By the way, that moble base is an absolute must if you plan to move it at all. Then I discovered that the cord was too short, so I put a longer cord on with a twist lock plug. Most of my machines have twist lock plugs,anyway. When it is assembled you must be sure the infeed, cutter, and outfeed rollers are adjusted properly. There is a gage block that you must make, and the manual shows you how. The dust chute has an outlet of 5", so a trip to the local hardware store to get a 5" to 4" reducer and some duct tape, because is was not a good fit. It is essential to hook it up to a dust collecter, or you will be hip deep in chips very fast. After all was said and done, I am pleased with its peformance. The serrated infeed roller keeps the wood moving through at a steady pace, and it has two speeds, but I stick with the slow speed to get the best finish. The roller extensions eliminate snipe, once they are adjusted. If you get rough cut lumber, this is a worthwhile investment.

Good planer, trouble with dust collection.
I purchased this planer 6 weeks ago. The "dust hood" that is sold by Toolcrib for this turned out to be ( not mentioned in the catalog) to be 5". I have tried working with both Toolcrib and Delta to find a way to connect this to my 4" dust collector but, after receiving 2 more dust hoods and 2 adapters that were purported to work, I still do not have a solution. I've not had a chance to plane much wood on it yet, but it looks well made (although in China). Anyone that has found a solution let me know. ... Read more

Features

• Titanium handles for lightweight and maximum strength
• All-locking blades for high-pressure reliability
• Sheepsfoot Blade with Cutting Hook for more efficient serrated cutting
• Premium belt sheath included for belt-side portability
• 154 CM premium stainless steel Clip-Point Knife

Amazon.com Review

Who wants to install 400 feet of crown molding? We'd be thefirst to volunteer, as long as we get to use this finish nailer.Weighing fewer than 4 pounds, it's light, ergonomically pleasant, andhas a great line of sight. We really like the depth adjustment on thismodel, an easy-as-pie five-position vertical slide right next to thetrigger. Nails load in a second, and you have the nice option of lockand load, or load and lock--something we think every nailer shouldoffer. Jams clear in no time without tools, another feature that showsoff DeWalt's attention to detail. The pad is high quality and didn'tmar anything we tried it on. Speaking of trying on, we looked great inthe cool, mirrored safety glasses included in the kit, and we're sureyou will, too. --Kris Jensen-Van Heste ... Read more

Features

• Swept back contact trip with low-profile no-mar pad
• Lightweight magnesium frame, weighs only 3.85 pounds
• Five position vertical slide for indexed depth setting
• Dual load magazine can be used either as "load and lock" or "lock and load"
• Tool-free jam clearing and 360-degree exhaust

Reviews (13)

DeWALT really hit the nail on the head with this one!!
I own both this gun and DeWALT's 18 ga. nailer. I have owned and used this gun for 2 years and have nothing but praise. It's funny, Home Depot used to carry these but gave up because so many people refused to change from other brands. Too bad for them!!! This gun is light but strong. A previous review had indicated that nails are difficult to find. What? This gun accepts all 15 gauge finish nails. Believe me I have used them all. I have run countless nails through this gun and have never had any issues with it.

Some features that I like:

1.The magazine is very easy to load.

2. Indexed depth setting is easy to use and requires no tools.

3. I can adjust the exhaust airflow to any direction. This is nice so it doesn't blow a piece of sawdust into my eyes.

4. If you jam a nail you can open up the firing head without the use of tools to free the squished nail.

I have used this gun on 6 inch crown molding, baseboard, installing doors and cabinetry. I have no complaints. I have no suggestions to make it better. It's perfect as far as I am concerned.

Plain tired of driving nails?
DeWalt hit the nail on the head (no pun intended) with this great nail gun. Works flawlessly, feels great, well balanced and looks good. This one wins hands down over the rest of the players. Enough said!

Best Gun I've Owned
I have been a General Contractor, Trim Carpenter & Cabinet Builder throughout my 16 years in the industry and have used a lot of different nail guns. Out of all of the 15ga nailers I've owned (senco, bostich, porter), this is truly the best of the best. Just the feel of the gun is very impressive to say the least, whatever the weight. This nailer is VERY easy to use, even at 120 psi the depth stop does it's job, more than I can say for my porter, which I GAVE away after using this for a while. I've been through about 6 boxes(18000) of Senco nails and yet to have a double-tap with the bump-action trigger and it hasn't jammed even once, not quite the record with the senco or bostich. This gun sinks the nail-heads consistently and has NO kick when driving through knots. And the fact that the no-mar foot doesn't leave it's "initials" in Redwood was outstanding! I would recommend this DeWalt 15ga Nail Gun to anyone who has the need or desire for one.

Great gun
I use my dewalt finish nailer every day, it performs great. No jams, no double taps, it's light weight and easy to use. I used to use a Senco. Never again.

Great Tool, hard to find nails though.
Very nice tool, light, doesn't Clog, and stick like some of my others nailing tools, I do have a hard time finding the nails at a Fail price. ... Read more

Features

• Weighs 6.4 pounds total; 2-year manufacturer warranty
• Powerful 18-volt rechargeable battery delivers more power and longer run-time
• Extended 22-inch blade provides a smooth and level cut
• 50-minute run-time trims up to 1200 square feet per charge
• Low vibration, dual-action blades improve comfort and reduce fatigue

Reviews (3)

Great Trimmer
When I purchased this, I was concerned that being battery operated it would be underpowered. That's not the case at all, it has plenty of power. The battery charge lasts longer than I do, too.

A real pleasure to get away from the cord. The vibration is much less than any other trimmer I've tried.

No More Cut Cords!
I agree with what was said in the earlier review. My own comparison is with the 10 year old B&D 22" electric that it replaced. I was impressed in that it gives up nothing in terms of power. I used it today for the first time on my 150' of hedges and lots of other bushes, especially hugh forsythias. It did all the trimming with no sign at all of battery fatigue. It's much smoother in operation than the old one. There are two things I didn't like about it. The forward handle is made so that it's only comfortable to hold at the top and not at the sides as in the old models. Also, as was said, there's not a lock-on switch. You have to hold the switch on. They did that, no doubt, for safety reasons, but that's probably where the fatigue enters. Many folks will rig up a clip to achieve the same thing.

Good trimmer
Black and Decker has a few cordless hedge trimmers so I was a bit confused which to try. This was their latest model and boasted a 40 minute run time so I decided to go for it.
The product worked great. I charged the battery the full 6 hours required when you first get it. What's nice about it is after the initial charge the full charge time is 3-6 hours, but the unit can left charging indefinitely without damaging the unit.
The unit performed admirably. It cut beautifully and the charge lasted the 40 minutes. The Hedge Hog breezed thru my bushes with ease. If I have two criticisms, they are 1) you have to keep your hand squeezed on the handle while using it - not a big deal cuz your hand is there anyway, and 2) (and more importantly) the unit isn't light. After about fifteen minutes or so, my arms got a bit fatiuged.
Still, the criticisms are minor, and I'd highly recommend this unit to anyone who doesn't want to deal with the gas or electric powered models. ... Read more

Amazon.com Review

If you've always wanted to own Powermatic's model 66 table saw, but you've held off because of the space it demands, then take a close look at Powermatic's Special Edition 66, built with the home workshop in mind. This is a piece of shop equipment that makes a toolhound's heart beat faster. The eye-catching high-grade cast-iron top is machine-polished to a mirror finish. The saw's table--impressively thick and durable--has both a cast-iron wing extension and a laminated extension (total surface: 28 by 53-3/4 inches). With one of the heaviest cast-iron trunnions on any 10-inch saw on the market, the model 66 virtually snuffs out vibration. The double drive-belt system--hooked up to the burly 3-horsepower motor--delivers pretty astonishing power. A C-flange mount takes the weight of the motor, so the blade cranks up or down easily without the extra weight. The saw's hand wheels are also made of cast iron and have excellent clearance.

The heart of any table saw, arguably, is the fence--and Powermatic's Special Edition 66 sports the award-winning Accu-Fence, a system that uses only two moving parts to create easy-gliding, precision, no-budge fence action. The left-tilting blade tilts away from the fence, which helps prevent kickback and binding of the stock, making for smoother cuts. The two-sided blade guards work independently of each other, so the blade is always covered. The guards also swing totally out of the way to make blade changes easy. Behind the blade, there are antikickback pawls for added safety. The saw's base has a clean-out door, allowing you easy access to the saw body and making cleanup a snap--no reaching around the saw components or having to remove the motor cover. You'll also receive a load of extras, including a dado insert, a motor cover, and an extension table and legs. Admittedly, this isn't a cheap saw; without a doubt, however, it is an excellent one that would make a great addition to any shop. As with almost everything, you get what you pay for--in the case of Powermatic's Special Edition 66, you get a fantastic piece of equipment your friends will envy. --Jon Groebner ... Read more

Features

• Built-in dust collection and convenient cabinet access for fast clean up
• Powermatic quality with a smaller footprint
• Heavy single piece cast-iron trunion for minimal vibration
• Laminated extension table
• Accu-Fence and rail system

Reviews (18)

Worth every penny - and then some!
This is one awesome table saw! I used to have a Grizzly contractor saw that drove me nuts - the fence and blade required constant re-adjustment. I've had my PM 66 for 3 years, and have cut thousands of board feet of lumber - haven't even re-adjusted the fence once! Dead-on accurate everytime.

Recommendations: - Get the 52" table extension. I dropped a Rout-R-Lift router base into the extension table to save space in my shop, and LOVE the ability to use the PM 66 fence for dadoes and rabbets on plywood projects (bookcases, TV stands, etc).

- Get the HTC mobile base. Easy to move the saw, and locks in solid. With the weight of the PM 66, this provides a completely stabile, yet mobile, cabinet saw.

- Wire the motor for 220V. Runs whisper quiet. Also, if you get the HTC mobile base, spend a few extra $$ and get a long, heavy-gauge electrical cord that you wire into the motor. I can move my saw anywhere in my shop, plug it into the 220V receptacle, and never worry about tripping over the cord.

- Don't think twice about the cost, if you are a professional or serious hobbyist. Fit and finish are superb. Dead-on accurate. Rock solid. Own one, and you'll understand.

Impressive little tool
Took delivery on the tool several weeks back, and in spite of the impressive crating of the tool, the unit arrived damaged (broken switch/starter assembly) and the separately boxed extension table was mushroomed at one corner.

After two weeks of having to harrass various customer service groups to get the parts through the order process and actually on a vehicle heading to my part of the country, the parts arrived. Total setup time was about 4 hours' worth of work, and about two weeks total duration.

Installing the extension table is a breeze, and most mating parts lined up perfectly (I did have to grind two of the table top attachment point slots wider as getting the top dead parallel with the blade was not doable with the factory borings.)

The tool itself is well crafted to say the least. The unit is absolutely massive, and vibration is all but eliminated. I was able to stand a penny on end on the table, start the motor and turn off the motor, and the coin did not quiver once. The cast iron top is polished to a mirror finish and as far as my testing indicates, is dead flat. The fence operates very smoothly and locks into position prefectly parallel with the blade (once initially aligned.)

Note that the extension table shipping with the saw as I write this is not the green color pictured, but rather is a black laminate over particle board. Also, to potential buyers, make sure you inspect the bottom of the beefy miter gauge to make sure it is burr-free (I had a couple of small ones I ground down after a few minor scratches in the top.)

Having never used this model before yet having heard it regarded as the 'gold standard', my high expectations of power and accuracy were met. Wish I had purchased this years ago.

The best I have ever used.
The Powermatic 66 (3hp) has been in my shop since 1984. It has ripped, crosscut, mitered, dadoed, molded, mortise-tenoned, styled-railed, worked wide materials and very small items all to perfection. In my book, this is with out a doubt the saw of choice! It has never failed to respond to a request that I have made of my Mr. 66.

The saw is equipped with a Beismeyer fence, as I tell my freinds, if you want to remove 128th of an inch of material bring it to Mr. 66, set it and cut it. The tables show the quality story, smooth and polished.

As you can see, I respect this tools because of the capacity and performance it produces. Mr. 66 is truily a joy to work with. It runs several hours a day which causes, because of the hard we work, to go through the edge of quality blades about every two weeks, then off to the sharpening shop. Buy it, use it and enjoy it, as I have. Charles D. Wallin

Total Woodworking Pleasure
Once you get past the several hours needed for set-up and the difficulty getting into your shop you will NOT be disappointed. This tool is AWESOME! Even a novice woodworker can get straight, true and accurate cuts with very little effort and experience. The cuts rarely need additional finishing. There is no vibration, hesitation or error with this machine. I wish I had bought one long ago.

Built Like a Tank
I bought my Powermatic 66 last year after deciding to upgrade the 1 1/2 hp Unisaw I had been using for years. I was sure I wanted a new 3hp Unisaw until I saw it and a Model 66 side by side at a woodworking show in Virginia. There really is no comparison...the 66 is heads and tails above the Unisaw in fit, finish, smoothness of elevation and tilt, and overall mass.

Another factor in deciding to go with the Powermatic was my previous history in dealing with Delta service. You feel like you won the lottery when you actually get someone to answer the phone!

I've equipped my 66 with an Excaliber overarm blade guard, a Biesmeier splitter and a Forrest 10 X 40 Woodworker II blade. If there's a better rig for sawing wood, I sure as heck don't know what it is! ... Read more

Features

• Includes 1/2" impact wrench, (2) 18V XR+TM PACK extended run-time battery packs, 1-hour charger, and a heavy-duty kit box
• 1,650 in./lbs. of maximum torque for tightening and loosening large nuts and bolts and driving fasteners
• Only 6-1/2" long to get you into tighter spots
• Heavy-duty impact mechanism provides the power while delivering less kickback
• Heavy-duty magnesium gear case and all-metal transmission for job site durability

Features

• 1/2" ratcheting chuck with carbide jaws prevents bits from slipping
• Superior ergonomics provides optimal balance, comfort, and control
• DeWalt built high torque motor provides 500 in./lbs. of maximum torque
• Exclusive 3-speed transmission features a maximum 3rd speed at 2,000 rpm
• Hammerdrill mode: 34,000 bpm drills faster holes in masonry applications

Features

• One year warranty/30 day performance certification
• Aggressive sanding action with a swirl-free finish
• Pad control feature to prevent pad spin-up
• Variable speed can be set between 5,000 and 12,000 orbits per minute
• 100% ball-bearing construction

Features

• 150 PSI tank for longer tool run time
• 2-port removable console for remote air regulation
• 3.4HP, 15A, 120V, 60Hz
• Full roll cage to protect pump and motor
• Mobility kit for increase portability

Reviews (1)

This is a FABULOUS compressor.
Where else could you get 6CFM at 90psi and 150psi operating pressure in such a compact and portable package? Price is a little high, but all of my tools (as do most all of them) have a maximum operating pressure of 125psi. And unlike the other compressors I have owned over the years, this one can actually provide enough air at 125psi to get the most out of my air tools. The only thing that I don't like about it is that it only has a 50% duty cycle. ... Read more

Amazon.com Review

While there are a number of rotary tools on the market made by a host of different manufacturers, the Dremel Moto Tool is the one they all strive to copy. Dremel's MultiPro variable-speed model is great for a huge range of projects, from home improvement tasks to hobbies and crafting. It has a continuously adjustable speed range from 5,000 to 35,000 rpm, which allows the user to effectively work with materials as soft as balsa wood and as hard as ceramics. The flexible shaft that comes with this model is great for working in tight spots many rotary tools can't touch. The kit also comes with an assortment of accessories and a handy carrying case. Others may copy it, but Dremel has been making rotary tools so long they've come close to perfecting the idea. --Brian Trinen ... Read more

Features

• Variable speed, from 5,000 to 35,000 rpm
• Quick-change collet
• Flexible shaft attachment, 77 bits, and two clamps
• 5-year warranty

Reviews (16)

My Flexible friend !
Before I bought the corded Dremel Multi I used to use hand tools. The results were good but took time to produce. I then saw an advert on the television for the Dremel. I then went to a tool shop to see it and it's rivals. The only other competitor was the Black and Decker corded Wizard. The wizard lost out to the Dremel due to it's narrower range of operating speeds and it's greater size. The Dremel also had a far greater range of accessories to supplement it's use.

>I really appreciate the way that the Dremel can do what it does so quickly so well. It can carve letters, polish to a very high standard and grind metal as well as the capability to engrave metals as well. The fact that it does not take up a lot of room, especially when you consider the wide range of capabilities it has.

>To turn the Dremel on you slide the switch to one of the numbers on the scale, the further along you go the faster the shaft rotates. You set the speed according to the one recommended in the instruction manual which has pictures to guide you as well. You then apply the tool to the surface you are working on and gently do the polishing etc., but not too hard as it can damage the tool.

>I had my Dremel fitted with a optional chuck which makes bit changes faster and more convenient than the standard collet bits. You just loosen the chuck, put a bit in, re-tighten the chuck and select the right speed and you are ready to go. It also has a decent grip for easy and comfortable holding. It is quite simply a joy to use for craft. Special shafts can be fitted to the end as well, so there is little that has been missed out.

> The flexible shaft lets me work in places where the tool can't be inserted especially some places in my jeep! It's also easier to hold the flexible shaft when working on small workpieces like fishing lures etc.

The Speed is the Key
This is a fantastic tool for a home owner or craft enthusiast. The range of small tasks that you can achieve with the Multipro is unbelievable and easy, even for an untrained person.

This kit includes a flexi-shaft, which helps you get into corners by extending the accessory bit using a long flexible shaft. You can buy the shaft separately if you already own the tool, but it's cheaper to get it with the kit if you're buying for the first time. The carrying case is attractive, and fits everything with room to spare.

Some of the things you can do with your Dremel tool include drilling holes to hang pictures, putting lot numbers on your house, engraving your initials on items you don't want stolen, sharpening scissors and lawn mower blades, cleaning jewellery or golf clubs, giving sticking doors and windows a quick repair, cleaning silverware or brass or even mag rims, installing your car stereo and adding auto accessories to dress your car, trimming nails that are sticking up, regrooving damaged screw heads, sanding in hard to reach places, and so on.

It is however a small tool, so you shouldn't expect it to sand a dining table like a belt sander, or cut out a large wood pattern like a scroll saw.

You need a tiny spanner to change accessories, but it's included in the kit, along with different mandrels to hold the bits securely. There is a wide range of accessories available for even more tasks, and a great additional purchase is the tile cutting attachment, which allows you to do bathroom tile repairs with a lot less mess and guess work.

The secret to the Dremel is the speed, with a range of varying speeds up to 35,000 rpm, which you control yourself. The instruction booklet is very detailed, and gives you lots of tips. Dremel also has an amazing website, with step by step how-to guides.

Every home should have a Dremel Multipro

Works well for some things, doesn't do everything they say
My wife bought one of these for me as a gift. I had mentioned a couple of times it might be nice to have one... I don't know what came over me. The tool works great for details and doesn't work for much else. I have used it for a number of projects where I needed to file or grind something small... screws in a part that were 1/64th of an inch too long kind of thing. It works great for that, I don't have to apply much preassure to the item being ground. I tried using it to polish a pot (it's in the list of projects to do with your dremel) ahhhh... don't bother, threw polish compound everywhere because of the speed of the tool. Works far faster with a rag by hand. Or better yet... a big buffing wheel on a bench grinder. Works well for engraving too. Haven't tried it for much else. I think my wife will end up using it more for crafts than I will for the kind of stuff I do.

A must have tool
I disagree with the negative reviews. A dremel is not a benchgrinter or an orbital polisher, etc, etc. It IS 3 pounds of power concentrated into a 2 oz bucket. If you use it for what it's meant for, it's great. In the fashion of any MultiTool, like a leatherman, it has multiple funtions in ONE tool. While a dedicated tool might do a better job in certain circumstances, it can only perform ONE funtion.

This ol' Dremel done cut me a lot of stuff
This ol' Dremel is a mighty clever tool. I used it out in the woodshed to whittle me a slingshot out of a big ol' branch from a tree. Its also good to keep Pappy away when he sneaks up on me back in that ol' woodshed. Pappy sure do love his moonshine, and it makes him a bit frisky, I reckon.

Once I done shot me a possum back behind Ol' Man Stapleton's barn and that ol' Dremel came in mighty handy, let me tell ya. I got Ol' Mr. Possum's fur coat off of him lickety split. That sharp ol' Dremel took the head and legs off as fine as ya please. Threw Mr. Possum in the pot, me an' the kinfolk had some mighty fine vittles that night, let me tell ya.

This Dremel is also mighty useful for some doctorin' at home. Mama's prone to corns n' bunions, and we ain't have no money for the doctor. So I whipped out that ol' Dremel lickety-split and cut them bunions right off of Momma's foot! You shoulda heard her holla! But them nasty ol' bunions never came back, see Momma?

Only thing I don't like about this ol' Dremel is it sounds kinda like a pig squealin'. I reckon I don't mind, cause then people don't never know if I'm out back whittlin', or havin' me some fun with some lost campers or other city slickers! Yeee Haw! ... Read more

Amazon.com

This is possibly the best air hose we've seen. Light polyurethane construction takes the bulk out of it, meaning easier transport, but it's super tough and will not kink or crush, no matter how you abuse it. Rubber hoses become difficult to maneuver when the temperature drops, but this one's light and flexible even in temperatures below zero. You can't see inside rubber hoses, but this one's translucent enough to let you see if you've got contaminants in the line. If you're running a pneumatic tool, you ought to be running your air through this.--Kris Jensen-Van Heste ... Read more

Features

• Re-usable hose ends
• Lightweight
• Flexible to -40 degrees
• 2.5-inch bend radius
• Low drag resistance

Reviews (5)

Light Weight, but hard working
Excellent hose, very light weight, and kink free. Also VERY durable, we ran this hose across razor-sharp wire mesh all weekend and not a single leak. Other than the price, the only complaint I have is the ease with which it tangles when coiling, but if you have a reel, this is the hose to get.

BEST AIR HOSE FOR CARPENTERS
I have used many different brands of air hose for my 20 years carpentry works. Conventional hoses are heavy and also not easy to roll after work. I bought it a year ago from Amazon. Since I have used it, I have never taken old hoses anymore. This is very durable, light and easy to handle with nail guns. Price is much higher than conventional hose, but it is worth. Excellent product!

Wow, a finish carpenters best friend.
Well it looks as if someone made a hose that will not wrap
around your feet. This light weight hose makes it easy to use your nail gun. As a finish carpenter I use my hose 5-6 days a week and this hose lays flat and stays out of your way. This product is by far the best air hose on the market today.

50' 1/4 Polyurethane air hose
Light Weight Durable & Storage Friendly

best hose ever
I do lots of roofing and general framing. This hose is the best I ever had, especially in cold conditions. ... Read more

Amazon.com Review

For anyone who uses and works with tools enough to require a grinder, this model from Tormek is a well-designed, high-performance option. First and foremost, the Tormek Super Grind is water-cooled, removing one of the major obstacles to grinding: overheating your tool. With the water-cooling system, the wheel is able to turn at a much higher revolution, allowing for more-accurate, cleaner results. With its excellent bracket and clamp system, the Tormek works well with varying kinds and sizes of blades, but keep in mind that it will need additional accessory brackets for some tools. The grinder comes with an aluminum oxide grindstone and a leather honing wheel, and both connect to the motor at the same time so you won't have to switch wheels on the machine. The unit uses a 115-volt motor and reaches up to 90 rpm, which is plenty of power for most uses. In fact, we were impressed with the overall burliness of the tool--it's definitely intended for heavy-duty use. Only the on/off button was a little unwieldy, but it's well protected and should hold up. This Tormek is certainly a great machine for sharpening and finely honing gardening tools, woodworking tools, and more. An instruction video and book are included. --Jonathon Tudor ... Read more

Features

• Leather honing wheel
• Powerful 115-volt motor; 90 rpm
• Water-cooled
• Angle master sets correct edge angle
• Aluminum oxide grindstone

Reviews (22)

Expensive, but labor-saving with fantastic results
Like many others that are in to woodworking, I have always looked upon sharpening as a necessary but evil chore.Drag out the stones. Drag out the water or oil.Search around for the damn jig to hold the chisel at the proper angle.Stroke, stroke, stroke. Now spend time on the honing. And sometimes, even when you thought you had done the best you could do, the thing still is not as sharp as you would like it to be.

Cue the Tormek.I looked for a long time at many sharpening machines and systems. I also spent time reading reviews on the various systems and methods out there. I love delta tools, and was about ready to get one of their sharpening centers when I suddenly went into overdrive about Tormek. So I said "what the hell" and bought what was being offered as a Cabinetmakers Package deal. I will never regret the decision.

All I have told my woodworking friends is that if you do not own a Tormek, then you are using dull tools!! Period. This baby can put an edge on a chisel that is truly scary. I have never been able to obtain such an edge and a polish by hand. Now I am confident that there are those of you out there who can and do obtain comparable results by hand, but for me, I'll leave it in the hands of the expert, which in this case is the machine. But a few more jigs...hell...buy them all over time. don't feed the dog for a few weeks, or go to cloth diapers for the kid...just save a few bucks and get to sharpening. I have already saved money by sharpening my own planer and joiner knives several times, and you know how expensive those knives can be, and how active woodworking can eat 'em up.Now these babies are kept sharp and ready.

And lathe tools? My God...it's like a whole new world. I feel like I was using a screwdriver to turn with before I got this tool. It puts such an edge on your lathe turning tools that it is even more of a pleasure to turn, and, naturally, requires less effort.

I am nothing but satisfied with the tool. Pricey, yes. But you are paying for precision, accuracy, repeatability, and results. Just do it.

Worth the money
There is no doubt that this machine produces the sharpest edges I've ever had on my tools. I got real sick of sharpening the "old" way with bench stones, oil, honing guide, etc... It seems like I spent a lot of time getting things set up and then was only marginally satisfied with the results. The Tormek system is easy to set up, the Angle Master is very ingenious, and the results are perfectly repeatable and extremely quick. I can sharpen a set of seven chisels in the amount of time I used to spend on just one. I use mine for plane irons, chisels, planer and jointer blades, and knives. I don't use it for turning or carving tools so I can't comment on its value in those areas.

Here are the things I like:
- Uses the same stone for grinding and polishing. Sounds too good to be true, but it works.
- The array of jigs available make it possible to sharpen just about anything imaginable. Rather than having a simple tool rest that sharpens everything ok but not great, they've designed a whole system that makes it possible to put a keen edge on every tool you own.
- Water cooled, low RPM. Doesn't create sparks or destroy the temper of the tool. Other water cooled sharpeners are available but not nearly as capable as this one.
- Rock solid construction. Admittedly, this thing isn't very complex but the machine itself and all the jigs are top-notch.
- Outer end of stone is flat so you can lap the back of your chisels and plane irons.
- Makes my kitchen knives unbelievably sharp. Never knew what I was missing before (I like to cook).

What I don't like:
- Generally I prefer a flat-ground edge to a hollow ground edge. There are sharpeners available that will do a flat grinding but overall I'm more than happy to give that up for the results I get with my Tormek
- You really can't get by without the stone grader. Don't know why they don't include it in the base package. Make sure you get one.
- Jigs are expensive. When you get some of these jigs you'll be amazed that they charge so much for it. And unless you don't plan on sharpening anything more than chisels and plane irons, you'll need more jigs. The flip side is that you need only buy the jigs you want.
- Some of the advertised uses seem silly to me. I can hone the edge of a hand scraper with a bench stone in about half the time that it would take to set up the Tormek. And who really needs a razor sharp edge on their axe?

Overall, I'm extremely glad I got the Tormek. I don't like spending time sharpening my tools-I like to spend time using them. The Tormek allows me to get the onerous task of maintenance over and done with so I can move on.

One of the best investments I ever made
I make my living with tools, ten years as a contractor and the last twenty as a blacksmith. Even though I buy top of the line tools, seldom does a tool surpass my expectations. The Tormek grinder is a notable exception. I bit the bullet and bought the complete setup with all the jigs. I started by grinding about 20 wood chisels that were in various states of dullness, including some with deep nicks. Without exception, I was literally able to shave the hair off my arm with every single chisel after sharpening them on this grinder. I also sharpened some scissors and on my first attempt, was able to cut a piece of cloth as narrow as a single thread wide. A hand plane was able to cut a shaving thin enough to see through. Tormek includes a jig that makes setting the exact blade angle a simple matter and proper angle/blade geomeetry is the key to a good edge.

Though the tools are sharp when you finish grinding, the leather honing wheel puts the finishing touch on a razor edge and cutting a thin curl across the end grain of a piece of wood is a simple matter. The instructions are clear and the machine well engineered. While a bit pricey for just home use, even hobby woodworkers would benefit from this investment. The tool is not difficult to use and I had my wife sharpen a couple chisels. There was no difference in the quality of the edges from those I did. I performed before and after tests with a chisel that appeared sharp. Initially it would cut a reasonably even curl going with the grain of the wood. After sharpening on the Tormek, it would cut the same, or even better, curl going across the grain and through a knot.

The jigs are versatile enough to allow for sharpening a wide range of tools. The edges I obtained were, in nearly all cases, better than the factory edges on a new tool. I highly recommend this grinder, especially to anyone who regularly uses, planes, chisels, gouges, and woodturning tools. It is a heavy duty machine that will do all the manufacturer claimes, and more! You will wonder how you ever lived without it.

It could be better!
I also wonder why someone else has not made a knock off at a better price. I have had this machne for 3 years and am on my second stone. I buy and sell antique tools as well as make custom furniture. I have used it to sharpen every thing but my internal gouges. I do not like the dimond dressing attachment. I machined a new jig that would hold the $20 dimond dressing wheel by Delta. It makes for a very flat stone in less time. I have also made jigs that are stiffer that do not flex. I love the fact that I spend so much less time sharpening my tools etc. I sharpened my 13 planer blades. I had to make a longer guide so I could slide the blade all the way accross. Time is money and even at the price they charge I have made my money back many times over with the time saved. Having a small machine shop on the side has made the machine more usable for my needs. This is a wood carvers dream come true. Happy Sharpening

Better Than Expected
I have had my super grind for a month now and I am 100% satified. I had the Makita wet stone grinder before this and was not very pleased with it, but the Tormek is a pleasant suprise. I have sharpened every thing I can get my hands on, and after the initial learning curve for set up the sharpening goes quickly and easily. My biggest test for the machine was my 12.5" planer blades. My previous sharpener just couldnt do the job, but the Tormek was AWESOME! Highly recommend this machine. ... Read more

Amazon.com Review

Well-executed design combined with solid, reliable performance make this Bosch belt sander a tool with noticeable performance advantages. The Bosch features a magnesium-and-plastic housing that's lightweight yet durable. The tool is nicely balanced, comfortable, and easy to operate--important features in a tool that's often used for long periods of time for removing large amounts of stock. The Bosch comes with a cast-aluminum platen--so there's none of the warping that affects stamped-steel platens--and it sands perfectly flat right out of the box. Like many of the sanders in this class, the motor on the 1274 is aligned with the belt edge to allow flush sanding into corners. The tool's only drawback is that visibility is limited when sanding into tight corners, but that's a small minus when weighed against all the pluses. The belt-changing system works well--we didn't suffer any spring pinches--and the tracking adjustment tracks the new belt quickly and keeps it in place. There's a variable-speed dial built right into the trigger switch, which makes adjusting the belt speed fast and convenient. Wood magazine tested 10 3-by-21-inch sanders and liked the 1274DVS best. We agree that it's a great tool. --Mark McDonald ... Read more

Features

• Compact in-line design - For better balance
• 6.6 Amps, 550-1,100 SFPM power - For professional applications
• Variable speed - For fine finishing of fast stock removal
• Graphite platen pad - For cool running and uniform sanding
• Removable front handle - For close work

Reviews (22)

Just a little off the top
I'll be honest, this is my first belt sander, but I love it. I took the recommendation of some of the other reviewers, and I couldn't agree more. The sander is easy to use out of the box, and is a smooth-running, well-designed tool. The variable speed switch is very nice, and adds considerably to the user's control. I haven't yet done any heavy duty sanding, but for finish work the dust collection seems to work well. Five stars for Bosch on this one.

Solid Inline Belt Sander
I owned a small inline belt sander and found the shape gave me the opportunity to use the machine in many more ways, especially on its side sanding the edges of large pieces of solid wood. When I had to replace the small sander, I knew I wanted a larger version, and the Bosch fit the bill. Amazon sold it at a lower price than I could find locally, and then there was the tax I saved and free delivery!

A week later it was on the door step and it came out of the box and went right to work on some local hardwoods. There is lots of power to turn the 3 inch belt. While I have checked the belt for running off ceter- it almost never runs off. And the graphite patten is flat and stays cool. It has only a few hours on it but I am very happy with it. I have not used the fence, but I will, and I wish I had ordered the clamps to tie it down to a table upside down.

The only problem I have with the sander is the dust control. I have been using the dust bag and it is small, and dust puffs out of a small indentation near the dust nipple when lifting off or moving down on the wood. I have not tried to trouble-check the problem.

A happy Bosch customer and a happy Ammazon.com customer.

Awesome!! Nothings Better
This is an extremely well-designed and well-built sander. No complaints here only praise, praise, praise!

Thank you Bosch--you sure make my life a lot better!!

Effective machine
Works on the deck great with 36 Grit paper. However, the dustless feature seems to have been ommitted in the one I received. Borrowed a Porter Cable with a more effective collection system and in retrospect thought the more expensive Bosch would have been a better investment. Otherwise easy machine, good value.

Maybe I got a lemon?
I have recently purchased numerous Bosch tools from Amazon/Tool Crib and I have been a life-long Bosch fan. However, I have to say that this is the very first time I have been let down by one of their products. I guess I just got a rare "lemon".
Immediately on using it, I had problems with the "Lock-On Button". Either it would not keep the machine running, or when it did engage I could then not stop it! It works sporadically, but usually not until I have tried to disengage or engage it several times. Then, after just 15 minutes use sanding some deck timbers, a loud clatter developed. Sounds like a bearing problem? This did not seem to unduly affect performance, and since I purchased the unit for this specific job, I carried on for a while. Then, the rear belt wheel started to slip or disengage, like a slipping clutch. The work I was doing was not unduly difficult and for a period of time, the work was going like a dream, much as I am used to with Bosch tools.
So finally, I just gave up-extremely disappointed that I could not finish the job at hand.
I have returned it and I will get the 1276DVS instead. ... Read more

Features

• Includes tripod, rod, and case
• Self-leveling horizontal rotary laser
• 3/32" accuracy @ 100'
• 1000-foot range
• LD-100N detector

Features

• Aluminum cylinder
• Weighs only 20 pounds
• Ultra quiet operation
• 1/2 HP 1 gallon capacity
• Comfortable cushioned handle grip

Reviews (3)

Have compressor will travel
This is a great second compressor. I wouldn't buy this as a primary or first compressor but it works fine to support small nail guns. My other portable weighs 68 pounds and will keep up with 1 to 2 framing or roofing nailers. My shoulders ache from the number of times I have lugged it up 78 steps to a job site. This goes anywhere with a bunch of tools in the other hand.

Other than nail guns, NO it won't do much at 0.7 cu ft per min when paint spray guns need 10 times that, and a blow gun will empty the tank in 10 seconds or less. But seriously, this compressor gives me at least 10 shots from my 16 ga finish nailer before the motor kicks in; a couple more off of an 18 ga finish nailer, and as an acid test, I got 3 shots from a 3 1/4 inch framing nailer (not recommended but if all I need is 10 nails I'd rather carry this in - especially considering that my ripe old age keeps me from doing much serious hammering!)

Last word, the first one I received had a leaky reed valve and it had to be replaced by Amazon - I'm very happy with the replacement and have used it on several job sites.

so far so good...
i got this because getting compressed air cans at six bucks a pop started getting expensive. i use it mainly for cleaning and drying stuff. i had a sears 2 gal compressor but that thing was way too loud and vibrates so much it would crawl around on it's own. the senco is relatively quiet. it takes twice as long as the sears unit to get up to pressure but for a light user like me it's no problem. if there's anything that i would change is that i would prefer a 2 gal tank...1 gal is kind of small. a unit this small is only really good for filling tires, cleaning or brad nailing...if you need a compressor for any other activity or tool this is probably not the unit to get.

Disposable compressor
This compressor is considered "disposable", and has only 90 day warranty. Check out the review under combo pack that uses the same compressor. ... Read more

Amazon.com Product Description

Protect your hearing and listen to music at the same time. Whether you are at the job site, in the workshop, or mowing the lawn, you may be putting your hearing at risk, or at the very least putting up with irritating noise. Regular earplugs are uncomfortable and prevent you from listening to music while you work. WorkTunes' hearing protectors offer a high level of hearing defense as well as let you replace the irritating noise with your favorite AM or FM radio station. And while many stereo headsets have volume levels that can damage hearing, this set has a maximum volume level of 85 decibels, lower than the threshold of danger. ... Read more

Features

• Protective sound limiter
• AM/FM stereo
• 22dB earmuff
• Lightweight
• Comfortable

Reviews (31)

Money Well Spent
I love my Worktunes hearing protectors! I use mine while woodworking and commercial mowing. If a radio station is static-filled I would rather listen to a loud motor. My headphones have delivered high quality sound for both music and talk stations. The hours fly by when I have them on. I highly recommend them.

Great product, but not perfect
I originally became interested in these ear muffs for my wood shop after seeing nearly every landscaper in the world wearing them. Pros - Excellent noise protection, good sound, very comfortable, easy to use, great battery life, good construction. Cons - No markings on radio dial, reception could be a tad bit better.

As for the cons, the lack of markings actually isn't that big of a deal after a few minutes of use. You simply start at one end of the dial and finding your favorite stations becomes easy. I quickly developed a feel for how far to turn the dial to my favorite AM or FM stations. Another reviewer mentioned that these muffs don't receive FM stereo. They certainly do, but only if the station is strong enough and tuned in.

My other ear protection setup is a Sangean AM/FM/TV/Weather pocket radio or a scanner, and a $... set of professional grade David Clark earmuffs with speakers. Keeping in mind that this is about a $... setup, I still prefer the DC muffs for race tracks. However, the cord can get in the way while working in the shop or in the yard, and the radio needs to go somewhere. The Peltor does an excellent job, considering it's 1/3 of the price. As for blocking external noise, the Peltor muffs are as good as the David Clark units.

Overall this unit is comfortable enough for all-day use, I now wear them while mowing and snowblowing, as well as in the shop. I am happy enough with mine that I bought a pair for my father-in law. Over the six months I've had mine, they've been dropped, wet, frozen and heated, and they have held up well. We use non-radio equipped Peltor muffs where I work, they have proven to be very durable over the years.

great tunes
I purchased a set of worktunes while my wife thought I was crazy. But after using them one time she has now decided we need another set for her. Only complaint it is tuning dial very touchy. The earmuffs work very good for hearing protection.

Peltor Work Tunes 22 (not 09545)
I just recieved my PELTOR WORK TUNES 22 (not the 90545 model). The two models most likely have the same inside components. I selected the Tunes 22 because they are a little more compact. I do residential mowing with a 52" SCAG and these radio headphones work great. I was VERY skepticle before the purchase. After mowing, weed wacking and using a back-pack blower for several hours, I totally recommend this brand to anyone considering these. Fathers Day is right around the corner...A MUST for anyone who needs ear protection and enjoys music while you work!

These are just great
If you are looking to protect your hearing, theses are for you.
I could hear people talking but could not hear the tractor. I tend to play my music loud but these would prevent that. The volume is fine for my needs. Sometime I cut my lawn for 3 to 4 hours( 2 acres) and I use to be tired when I was done. I found out it was the noise that was making me tired. All I can say is buy them NOW!!!! ... Read more

Features

• High performance drilling speed
• 18-volt 3.5Ah Ni-MH battery for high speed drilling
• High torque drilling capability
• Lightweight ergonomic design

Reviews (1)

the seceret weapon
As a union journey man plumber I am always looking for the best product to increase my productivity. THis is the best Drill I have ever owned. Lightweight, Long Lasting and the Quality of being manufactured in Japan, not China like alot of its competitors. The battery technology and warranty are what really sold me. Having batteries go bad from overcharging or heat, the SoCal summers, is a big problem down here. THey have a warranty on the batteries for like 2000 charges. That is like 3 years, incredible. Also a problem is theft of tools and with the Panasonic I am the only person on the job with the tools so there is no confusion or misplacing of my tools. The only drawback is that Panasonic doesnt offer a full line of battery compatible cordless saws and lights yet. AS for this deal specifically where else can you get a top of the line Drill with 50$ in rebates. I paid the same for an 18v what most are paying for a 14.4v and mine is full of high technology. I completely reccomend this drill the the serious professional. ... Read more