Features

• 3-prong plug to prevent static electricity accumulation
• Variable speed (0-3,000 RPM) with pre-set maximum speed dial; ideal for ultra slow polishing
• Pre-set speed setting dial (from 600-3,000 RPM) for maximum control
• Electronic speed control maintains constant speed under load
• Easily converts from polisher to sander with hook & loop accessories

Features

• Patented dirty filter indicator
• 1,300 CFM, 850 CFm, 650 CFM
• 1 micron inner filter electrostatic outer filter
• Remote control 3-speed motor and delay shut-off

Reviews (10)

Poor Amazon return policy
While I believe the Delta 50-875 air cleaner to be a good product, it is a shame that I can't say the same for Amazon.com. I purchased the air cleaner and it arrived with a broken control panel due to shipping damage. I e-mailed amazon and requested that I be able to return the unit for an exchange. I received the return shipping label and UPS came and got the damaged unit. I thought everything was going very smoothly - so far I would have rated Amazon a 5 star type of company. It is a shame that after this they turned into a 1 star company.

first I received no notice of the unit being received or a refund or notice of a new unit shipping. Complete silence. In case you haven't noticed, there is no telephone number to contact a person to ask any questions. I e-mailed the questions and after 2 days returned a simple answer that my credit card had received a refund - no unit would be shipped. If I wanted another one, then I could order one. I checked my credit card and found out that they had refunded me but had deducted 9.99 for return shipping. Another e-mail to ask questions and 3 more days to have them explain that we will deduct the cost
of return shipping from your refund, unless the return is a result of our error. Therefore, $9.99 was deducted from your refund." I complained and they stated "Due to the circumstances surrounding your order, I have made a one-time exception to our standard policy".

It has been 2 months and I now have my refund - but I don't have my air cleaner. I get to start the process over again..

I am very disappointed with Amazon's actions after damage due to shipping damage.

Very pleased with the Delta
I bought two Delta 50-875 air purifiers and have been very pleased with both units. They arrived without damage (in contrast to comments made in other reviews posted here) and they both work great. I did a lot of research on Delta v. Jet or JDS before buying the Delta units. I find the Delta to be quiet and also clears the air in both my basement application and in a separate workshop installation. I do a lot of work with MDF. The electro-static filter allows me to clean the pre-filter (instead of replacing it as on some other brands). All in, I'm very happy with this Delta product.

3 Pocket filter is way too much money to replace
I love the air filter unit, but the 3 pocket filter that captures the 1 micron stuff fills fast (better than in my lungs I know) but it is expensive to replace. The electrostatic filter, if you need one, can be found elsewhere for 15 bucks and not $50 so shop around! My other complaint about the unit is that you have to do some rigging to make it hang from the joists but it can be done. Be careful not to bend up the box when doing so though!

Received just fine
Unlike others, I received mine today in fine shape. The shipping box was in good condition and the unit was in excellent working order.

I share the other reviewer's opinion that the eye hooks should have been on center for standard construction ie; 24"

My only whine is it a bit noisy on high volume and that is a weak complaint at that!

Overall I'm quite satisfied.

Pretty darn good
Delta came close with this one. The fit and finish are great there are only two problems that I can see with this unit. The mounting holes are 18" or 22" depending on which direction you are facing the machine. As most of you know that does not line up with any typical ceiling framing. A little more thought there would have sure saved a lot of work on the part of the end user. The other thing is the remote is probably the cheapest one I have ever seen. I am not sure if it will survive a fall on to the concrete garage floor from the table. Otherwise it operates without vibration and seems to do an excellent job of cleaning the air. Those are the main reasons to buy this one. Lack of convenience is the only reason this unit gets a 4 from me. ... Read more

Amazon.com Review

Remember that annoying workplace slogan, "Your parents don't work here--clean up after yourself"? Well, with the Delta 1,200 cfm dust collector, you've got a powerful, well-built machine to keep the shop clean. Built with a 1-1/2-horsepower induction motor for long life and curved steel impellers for durability, this dust collector whisks away debris from tools' dust ports with surprising force, so the only thing collecting particles around the shop might be your old broom resting in the closet. Set on a sturdy caster base for easy mobility, the dust collector stands 88 inches tall and has two intake ports for collecting simultaneously from multiple machines. The large 6-cubic-foot bags will reduce your trips to the trash and filter the air of particles down to 30 microns. For cleaner air, you can always upgrade to 5- or 1-micron bags. This is a great tool for any midsize woodworking shop. --Justin Paul ... Read more

Features

• Two-year limited warranty on machines, parts, and accessories
• 1-1/2-hp motor with fins for cool, extended running
• 1,200 cubic feet per minute of airflow--ideal for use with two machines
• Curved steel impeller for durability and maximum airflow
• Sturdy steel base with casters for mobility

Reviews (36)

Whatta SUCKER!!!
I'm working out of a makeshift shop (4 mil plastic shroud) in a walkout basement until I can move into my house that's being built and realized after a few hours worth of using my Bosch contractor table saw and router that things were going to get too dusty too quick unless I took some anti-dust measures.

I researched all the brands and talked to a good number of knowledgeable guys at the local woodworking store and decided (or rationalized) on the Delta 50-850. I took a hard look at the AP400, but knew that although it may meet my current needs, I would eventually want another intake port and more HP/CFMs. Also, I was honestly impressed by the Jet and Grizzly machines, but what can I say, I'm a Delta guy! Plus, I liked that it came standard with a 5 micron bag versus the standard 30 micron bags.

I got the box home, unpacked it and wasn't surprised to have it easily put together in about 45 minutes. Delta has always impressed me with their no-nonsense, K-I-S-S approach to power tools. Their elegance is in the basic simplicity of design. That being said, I did experience some angst when the directions said put flat washers on the screws before the lock washers .... seemed a little odd having the flat (big) washers on the outside, but oh well, I guess ACTUALLY following the directions would seem a little strange to anyone.

So then came time to put the bags on. Read so many reviews about how difficult it was or what a pain it can be. A total non-issue -- easy as could be without one hiccup. Maybe Delta added the "lower dust bag retaining clips" since the other reviews, but I had no problems whatsoever.

With my assembly having gone so well, I was excited to fire this thing up. I finished reading the instructions, went to attach it to the port on the back of my saw and realized the 2-1/2" side of my 4" to 2-1/2" adapter was exactly the same size as the Bosch's exhaust port. Quick trip to the Blue team and I found a suitable rubber plumbing adapter that worked. With that minor issue out of the way ... I'm ready. The moment of glory when I get to hit that big green 'ON' switch. So I do. It runs for about 3 seconds and then cuts off. I'm checking the reset button when my girlfriend comes downstairs with a lit candle. Ok, I may be a little slow but I quickly figure THIS ONE out. Used my biggest gauge extension cord and found a 20-amp plug (in the laundry room), fired 'er up and WOW!! Not too loud at all and used one of the hoses (remember, one is included. I bought an extra one.) to clean the place up a little before trying out the saw. Ran it all night long as I used the saw and didn't see one ounce more of new sawdust. Very impressive! I did notice that the smaller particles (the most dangerous ones) were still suspended in the air (kind of hazy), but I plan on buying the one micron bags and eventually an ambient air cleaner for added protection.

5 Reasons to buy the Delta 50-850:
1. With 4" hoses you need more CFMs to move the right amount air without breaking the bank (remember, manufacturers quote MAX CFMs).
2. 2 intake ports are better than one.
3. Easy to set up and easy to operate.
4. Don't settle. Go for a better model vice an 'ok' one.
5. It's a Delta.

Bottom line: This thing may cost a little more than what you to pay for a dust collector, but buy it and you'll find it's truly money well spent. I did ... and I'm very happy with both the quality and performance.

It was wonderful while it worked
This is a powerful vacuum. I bought mine 2 years ago. Unfortunately, about a month ago, the vacuum sucked in some small oak blocks from the table saw. The oak blocks, about 3/4" square by 3 inches long, slammed against the fins inside, dented the cover and slightly bent the fin wheel. I heard a loud clang and that was all, the unit kept working.

Soon after, I discovered that crash caused the fin blade to go out of balance. Now it is burning through start capacitors within hours. It is so bad that I am giving up on it and buying another vacuum.

I would get another 50-850, because it is a good product for the money. But of course, I'm not happy with the motor and the vulnerable, delicate design. Long-term durability is clearly this product's weakness. And, I'm dissatified with the flimsy structure, which makes the unit hard to move around.

I like my Delta tools but I don't love them.

Disappointed.
Disappointed, but Delta rectified the problem. They do stand by their products. I own a lot of Delta woodworking equipment. I have a 10 inch Unisaw, 14 inch Bandsaw, 8 inch jointer and 13 inch planner, a Drill press, a Belt/disk sander, jigsaw, mortiser etc. and I love them all. The Delta 50-850 has been a nuisance. The 1 1/2 hp 3450 rpm Tiawan motor keeps burning out starting capacitors. No, I do not overload it and I have not had any jams. I have replace three capacitors since I bought it in late 1997. The capacitors sell for less than $10.00. On my last visit to my motor service/repair shop (fall of 2003) I observed an identical Delta 50-850 in for a total motor rebuild. I was advised that chronic capacitor failure is often due to a faulty switch inside the motor. My dust collect has just burned out another capacitor (June 2004). If you visit the Delta repair parts WEB site you will find they want $310.00 plus shipping for a new motor. Would a new Delta motor be any better? That is more than a whole new dust collector from the AMAZON.com. The good news is that even though the machine was made in 1997, Delta stood by thier product and will replace the motor!

Now Thats POWER!
I'm new at building my own shop. I did quite a bit of homework on dust collectors. Just starting it up for the first time wowed me. You could here the power. After a quick connection with a hose and floor sweep it got its first test. After placing the floor sweep in a pile of sawdust and turning it on, it showed what it was all about. Without moving anything the unit picked up the pile and about another 3 feet around the pile. It was incredible just seeing it happen. I was originally looking at the next model down (since its a small home workshop) But have to say that I'm very happy with going with the next level up. I read it in other rewiews and I'll give the same advise. Spend a little more now. Its worth it. The setup took about an hour and was very easy to do. The bags connect very easy without any effort. One final piece of advise: Make sure your ceilings are high enough so you don't have to take the top off to move. Thats my only mistake. An I'm fine with it. Enjoy!!

How did I ever do without it?
After looking at units from Jet, Delta, Grizzly, JDS, and HF to name a few, I decided on the Delta 50-850 because of a good match of price and performance. I can say without a doubt that I was not disappointed.

The Delta units comes standard with 5 micron bags, and option that can cost $40 and up on other units. It also comes with clear botom bags for easy disposal and retaining clips to hold the bag in place while you fasten the band clamp.

My first impression when I hit the start button was one of pure happiness. I immediately felt a massive amount of suction and proceeded to clean up all the piles of shavings and sawdust I had accumulated in the shop. It sucked everything up in no time, yet I didn't see any hint of dust flying in the air because of particles making it through the bag. Only time will tell as to how long the unit will last, but for now, I'm very happy I decided to buy the Delta. ... Read more

Features

• Includes 1 year limited warranty on parts and accessories
• Uses 15 degree 3/4- to 1-3/4¿ wire collated roofing nails
• Rounded body style for updated look
• Powerful high performance motor with adjustable tool-free exhaust diffuser
• Steel safety contact with dual carbide inserts

Reviews (2)

Works good!
I have one of these little nailers - mostly used for roofing sheds. It works good. No complaints. Maybe one nail in 80-100 I'll finish with a light tap with a hammer. That's probably more a ding on the little compressor I use than on the nailer. For what I use it for it works fine. As the man said - It sure beats a hammer.

I have a love/hate relationship with this nailer
I should preface this review by saying that this is the first nailer that I have owned other than a brad or staple nailer. My exposure to nailers of this size is limited.

I just finished a siding job on a rent house that I own. The siding I used was Hariplank and it called for roofing nails for installation. I paid $249 for this nailer at Lowes.

The good:

- Much better than a hammer!
- No jams whatsoever
- Durable and tough (with the exception of the magazine cover)

The bad:

- Heavy!!! During the middle of my siding project I worked two days on a habitat for humanity project. On that project I used a DeWalt angled framing nailer. The DeWalt was much lighter than the PC. When climbing up and down ladders and on roofs a few pounds is really noticed.
- Inconsistant driving depth. Probably half of the nails stopped 1/4" - 1/2" short of being flush with the siding. When I attempted to adjust the depth some of the nails were impacting too hard so I had to back off the depth again. Maybe this had something to do with the fact that the material was fiber cement rather than wood?
- The magazine cover is made from a very flimsy plastic. It didn't break on me but I imagine that one day it will.
- For the price a carrying/storage case would have been nice. ... Read more

Features

• Large cutting capacity handles up to 3-7/8"x6" stock
• 4-1/2" tall pivoting fence for cutting up to 5-1/2" Crown Molding
• Powerful 15 amp Makita motor delivers 4,000 rpm
• Horizontal D-handle design for easy and comfortable operation
• Carbide tipped blade for precise cutting

Reviews (1)

Accurate saw with some minor nuisances
I found the Makita LS1221 to be very accurate and powerful. The miter table to the base were near perfect alignment and the fences were very square to the table. The saw is in no way flimsy. Adjusting the bevel and the miter angles are fairly easy. The miter gage is very easy to read. The bevel gage however does not offer enough contrast, especially after the smallest amount of saw dust gathers on it. The lever for locking the bevel gage should be in the front of the saw. The motor makes an annoying sound when it is first started and is positioned directly on the right side of the saw making it difficult to see what you are cutting as the cut proceeds through the wood. Changing the blade is very difficult because there is no way to support the blade fence out of the way to clear the arbor nut.
This however, should not be a problem for anyone who has three hands. ... Read more

Amazon.com

This battery-powered trimmer converts to a rolling lawn edger with just a turn of the handle. The 24-volt Power Core will give you up to 45 minutes of cutting time on just one charge. A 10-inch cutting swath makes quick work of yard trimming, and when you need more line, just bump the head and it feeds out more .08 commercial-grade line automatically. We like the symmetry and nice balance of this trimmer in hand, too. The unit stores in its wall-mounted charger, which indicates battery status with red and green lights. A great two-in-one yard tool for the homeowner.--Kris Jensen-Van Heste ... Read more

Features

• Two comfortable grip and hassle-free start switch
• No gas, no cord, and ready when you are
• 24-Volt Power-Core double ball-bearing motor and battery
• 10-inch cutting path, and 0.08-inch commercial grade line
• Wall charge rack included

Reviews (25)

End Your Research... The YardStick is #1
Ease-of-Use and Versatility! That's why you should buy the 24-Volt YardStick Cordless Edger. I did. Think about it, why do you avoid trimming your lawn each and every week? The trimming and edging really doesn't take that long. In my case, the reason I only trimmed about once every three-weeks was, (1) I needed to uncoil one 100 ft. extension cord for the front yard, (2) secure and tie the cord at the source and around the trimmer's handle (to avoid the "Houston, we've got a problem" power outage), (3) avoid the cord itself, (4) work a strategy for getting the cord around trees and flower beds, (5) trim the yard, (6) then rewind and store the cord... only to repeat the process for the backyard! All the real work was in the prep and storage time. What needless pain.

So, I did the research, and my wife got me the YardStick for Father's Day. I looked at other cordless trimmer/edgers, but the recommendations on Amazon for the YardStick, countered by user cautions/comments about other battery (awkward position of start/power switch) and gas edgers (noise/hassle), helped me take the plunge and try American Gardener. A look at American Gardener's web page will help anyone understand that "trimming is their thing."

I knew I'd received a quality product right out of the box. The YardStick, although not a lightweight, was balanced, comfortable to hold, easy to maneuver while being rugged with an elegant/practical design. I'm a tall person, so the "turn style-like" handle adjustments and easy conversion to edger-mode were important. The test drive was a blast. I was amazed at the "quiet" torque created by the 24-volt powerhouse. Cordless has come a long way. This is also the only dual ball-bearing motor I could find, and it hums. The precision of the edging feature was a welcomed surprise.

The chore that used to waste a good 35 minutes, now only took about 12- front AND back! Then, I just placed the YardStick in the charger for next week. Cool.

Five star potential, but...
I purchased my unit two weeks ago after reading the rave reviews. I too was ready to abandon my stinky gas trimmer.

I was initially optimistic when I opened up the unit. The unit was a bit heavy, but well balanced, and I liked how easy it was to spin the handle on the unit to switch the head from horizonal to vertical. The symmetric switch arrangement was intuitive and easy to use.

After charging overnight, I headed out to start trimming. Almost immediately the spool feed became a real pain. The line would not feed smoothly, making it necessary to remove the spool to advance the line manually almost every time. (I now know why they include a second spool for free...).

This weekend I brought it out for its' second use. This time, the spool kicked out a double length of line. This extra amount of line should have hit the line cutter and been trimmed off. Instead, the line wrapped around the cutter and SHEARED IT OFF, sending the nice sharp chunk of metal flying. Since the line cutter is riveted to the line guard, it is not a user replaceable item.

I'm sending it back in the morning and looking at other models. I haven't ruled out other American Gardner products, but I think I will pass on this one.

A little disappointing.
Given the prominently featured rave reviews, I wonder what changed at American Gardener in the last year. I've just taken it out for a spin, and was deeply disappointed in the runtime off a fully charged battery. After 15 minutes of trimming weeds along the perimeter of our jungle-surrounded lot, it was still willing but wimpy. Perhaps runtime varies with the nature of the trimmee: whispy grass along the flower bed edging might not use much battery power. Vigorous, rampant growth might eat the battery alive.

String advance is, if anything, a little too easy. Bumping the ground accidentally advanced the string more than I intended. But that's a good thing, compared to the wrestling matches I've had with string and pliers on other trimmers.

I'm still glad we purchased this unit because frankly, my attention span doesn't last much longer than fifteen minutes anyway, and the mere touch of my hand is death to a 2-cycle engine. We have a gas-powered string trimmer, but I can't start it to save my soul, it's loud, it's stinky, and it's too heavy for me. So this trimmer will actually get a lot of use around our weedy lot, in spite of the lackluster runtime.

Nice idea, questionable quality
Strengths
-----------
* Cordless
* Well balanced
* No gas, no oil, no exhaust fumes!

Weaknesses
------------
* Charge doesn't hold up for larger yards
* Blade that cuts off excess trimmer line broke after 2nd use

Bottom line: Nice idea, run time would be OK for smaller lots, but quality, especially on the the trimmer line blade, is lacking.

If the blade wouldn't have broken, I might have rated it 3.5 stars, instead I will be giving it to UPS to return to Amazon.

American Gardener YS24 24-Volt YardStick Cordless Trimmer
As a previous reviewer also experienced, the trim line cutter broke off the first time I used this product. I was hoping this product would do the job as it seems well built, but with the ease at which the line cutter broke off, I wonder. I have to now return mine and reconsider a gas powered unit. ... Read more

Amazon.com

Once in a while, we come across a tool that just makes us want to shut down the computer and hit the shop with renewed passion---and this is one of those tools. DeWalt has made such a fine router to begin with, but to package it with the bases you'd find yourself wanting later is a great move. The router itself has a super-smooth variable speed 2-1/4 -orsepower motor with a load range of 8,000 to 24,000 rpm and soft-start for virtually no twist. Kudos to DeWalt for giving this model a flat top and not the scalloped edge we've seen on their models before; this makes bit-changing a much better experience. For table use, the fixed base can't be beat. For freehand use, the D-handle offers unparalleled control and comfort. And of course, the plunge base is essential in any workshop, but we like this one for its integrated in-column dust removal (and it really works). An adjustable turret is great for repetitive work, and this turret's got five positions. We also like the placement of the plunge lock, right where you want it. For novice router-users, this is the perfect purchase; if you've been around the collet a few times, you still can't do better than this.--Kris Jensen-Van Heste ... Read more

Features

• Includes router motor, D-handle base, fixed base, plunge base, 1/4" and 1/2" one-piece self releasing collets, wrench, sub-base concentricity gauge, vacuum adaptor, large hole sub-base, and kit box
• 2-1/4 HP (max. motor HP), for smooth routing in toughest hardwoods
• Quick release motor latches, to change from fixed to plunge base
• Electronic variable speed from 8,000 to 24,000 rpm
• Micro-fine depth adjustment ring in 1/64" increments

Reviews (7)

Great tool DeWalt!!!
Well, this is my first "yellow" tool. I am a "blue" tool guy but I did not like some of the features on the new Makita routers, they are excellent tools with rave reviews but I did not like the entire motor turning when you adjust the depth. The problem was also compounded that nobody made a D-handle, plunge combo kit. I handled them all, every top name in the business. I took a look at the Dewalt 3piece combo and fell in love with it. It's a very well thought out system. Plus it's the only router brand that I know of that includes all three bases in one kit.

Pros:
Smooth Power, Soft start, very quiet for a router.
Three bases with great ergo design.
Awesome depth adjustment, motor does not twist.
Power cords are detachable.
Easy snap in and out bases.
Spindle lock.
Great value, D-handle base only costs you about 40 bucks with the three piece kit, retail is about $90!!
Fixed base in the router table, D-handle and plunge for freehand work, what else could you want?
Operate the power switch with your thumb without taking your hands off the router on the fixed base and plunge, not an issue with the d-handle.

Cons:
None, well ok, for you really picky people the case is larger than other routers, but remember there are three bases in there.

I did originally purchase the Milwaukee Body grip and loved it before I picked up the DeWalt. The ONLY reason I did not keep it was because I wanted a plunge base and the "red" company does not make a PB for the 5616. I did not want to spend another $200 on a plunge router, and still not have the D-handle option. This is my first router and I could not think of a better kit for the DIY homeowner to have.

Great Router
I really like this router. The soft start is great as well as the ease of use. I guarantee you won't find a better router kit for the price. The router bits that come with the kit are decent...but you'll need a set of carbide bits. It is a breeze to change bases and this has the great feel of a solid piece of machinery! Can't wait to use it again! Nice case too! You will be pleased...I sure am.

Excellent router kit!
I picked up this router kit about two months ago and I have not looked back since. The motor has plenty of power for just about any handheld operation. I don't know that I would mount this unit in a router table though. The Hitachi M12 is more equiped for that duty. Switching bases is quick and simple and the micro adjustment ring allows for accurate height adjustment on the fixed bases.
This router kit would be a great shop addition for any beginner or even a seasoned pro!

nice features, ease of use, ready for inlay, and dovetails..
I purchased this router set to do inlay work and use on the dovetail machine. I wanted to keep my bosch under the table so I did not have to pull it out all the time (by the way the bosch is a nice machine too!).
The Pros

1.) The bases on all three are narrow enough to hold brass bushings to follow templates and it was a snap to start the dovetailing like I wanted. It does have soft start like the bosch.

2.) The D handle is nice too I use that the most. I have had some trouble with the bit coming lose on the 1/4" shank but only because I did not tighten it good from the excitement of having a new tool (no harm done).

3.)It does have variable speed which I love to control on various hardwoods.

4.)The other feature I like are the cord connectors which have their own plugs and are easy to connect. The ends of the cord twist and latch so you know they're in place.

5.)The plunge base has a vaccum port on one of the shafts that I have yet to use.

6.)The dial on the router bases are smooth and raises and lowers the motor with precision and locks tight.

The cons:

1. When routing some stock you can really see the coils and bushings wind up the eletricity through the top vents which is normal but can be distracting, I'll get use to it

2.I like the one wrench bit removal with the push pin to hold the collet in place, but it takes some practice. (No more loose bits!)

Overall the machine is excellent and I am happy with the purchase and performance. The cons are very minor. I would have to choose this machine over the bosch if it were my only router because of how veritile it is (dovetail & inlay bushing bases, three bases, vaccum attachment, and variable speed) but what serious woodworker can only get away with one router? Oh yeah, and I did get the free bits......nice too.

Did come with bits shown
After doing a lot of research this was the perfect router set. Nice balance of features. Also as stated the router bit set was included. ... Read more

Amazon.com

There's not much you can't do with a set of tools like this. Frame and drywall and trim a room. Build a deck. Make some gingerbread shelves. All the tools in it are powered by 18-volt nickel-metal hydride batteries, and you won't feel any less power than their corded counterparts. Here's what we like about each of the tools in this kit: The recip saw has a tool-free blade-change system, perfect when you're on the roof and the allen wrench is in the truck. Variable speed offers exact cuts in a wide range of materials, and the electric brake means safety. We like the circular saw's large aluminum wraparound base and the 50-degree bevel capacity, externally accessible brushes and the electric brake that stops the blade almost immediately. It's light, yet powerful. The hammer driver-drill is super tough with a gear housing of industrial metal, and with 16 torque settings, you won't be at a loss. The rubber grip feels good and helps absorb impact. You can change the bits one-handed, too. Like the recip saw, the jigsaw offers tool-free blade changing as well as tool-free base bevel adjustments to 45 degrees left and right. Cutting curves? No problem, thanks to three orbital settings in addition to the straight cut. The trigger switch is nice and big, too, something we always like to see. We like the blower's versatility: Blow your work mess into a corner, then switch to vacuum and clean it all up. It's super light and so portable, it's perfect too for tidying up a vehicle. If you're vacuuming in the dark, just aim the four-position flashlight at your mess. A fantastic combination of tools, both for the professional and the homeowner.--Kris Jensen-Van Heste ... Read more

Features

• Kit includes charger, 2 batteries, and a tool case
• Lightweight
• Tools include reciprocating saw, circular saw, hammer driver-drill, jigsaw, blower, flashlight
• Comes with two powerful 18-volt batteries, charger, and tool case
• 2.6Ah

Reviews (2)

Good value
First the good news: this is a good value considering all you get for the money. Each of the tools is a decent tool in its own right. I'm glad I bought this and would recommend it to the occassional home improvement enthusiast.

Now the bad news: the blower is nigh useless. As with all multi-pack tools, there is a little skimping here and there on the tools. If you need any of these tools for anything more than occassional use, you might want to buy them separately. When you get a combo deal like this, you get what you pay for.

Nice Box!!
I bought this set in USA and lugged it back to the U.K. so i can say it's a big box. As for the tools... The blower is absolutely useless...well...actually i found a use for it...blowing cobwebs out of the corners of my rooms. The torch i haven't used much..doesn't seem like anything special. However..the main tools of the set i have found excellent. The jigsaw especially seems very powerful for a cordless. The drill is lovely to use..not to heavy and the batteries go on and on. Only one gripe..the chuck has some play in it straight out of the box. I built a large deck in 3 weekends just using these cordless tools and the only sticking point was trying mitres with the circ saw. No Chance...had to drag out the Ls1013 another excellent makita tool. ... Read more

Amazon.com

Here's plenty of power, whatever your pneumatic needs are, and it goes where you need it on big, rugged tires and a telescoping handle. It has enough juice to keep two nailers going at once, and its huge capacity means a lot less down time on the job. Even when it does cycle, it's ready to go back to work in about 15 seconds. The oil-lube design is a plus in our book because it'll run quieter and last longer than oil-free models. Bravo to Porter-Cable for their removable two-port console design, too. Take it to your roughest job site and have no fear—it rolls like a dream, even up and down steps. Just for safety's sake, there's a great roll bar protecting the pump and motor. If you're a contractor looking for the right compressor, you've found it.--Kris Jensen-Van Heste ... Read more

Features

• 120 V/ 60 hertz/1 phase motor
• 2.5 hp single tank air compressor
• Oil-lube air compressor for maximum durability
• 150-PSI tank pressure for longer tool run time,
• Quiet motor is easy on eardrums

Reviews (5)

way to go porter cable BEST MACHINE ON THE MARKET
this my 2nd air compressor matter fact I was building a arbor for the back yard after pressure was reached for nailgun I work over 1 hour before the compressor recycled the only problem I have had is to set the pressure on the nail gun after about 2 tries it worked perfect. I really like the idea on the removeable gauge face the compressor stay in 1 spot and 50 to 100 feet you can attact the face to a fixed object so you can save on trips back to the compressor when you need another nailgun as in replaceing the framer to finishing gun .great idea porter cable WAY TO GO PORTER CABLE

Outstanding compressor
After using and wearing out several other compressors over the years, I have learned a thing or two about quality. While I use a couple of the DeWalt compressors in my business and am pleased, this PC is my new baby. Very quiet. Works well, as promised, on a 15amp circuit, and just generally well made. The wheels are GREAT. Removeable outlet/guage panel is a very good idea. Will easily run 2 framers unless the guys are very fast. Don't even think about buying the oil free version. The oiled units are quieter and have 3-4 times the lifespan of their oil free brothers.

Performs to expectations
I purchased the porter cable model C3551 after considering the Dewalt suitcase carry model. Although the Dewalt weighed 20 pounds less, I liked the Porter Cable model that rolls. I also had reservations about the number of Dewalt suitcase models being sold as referbished.

My C3551 arrived with a defective tank pressure guage. I called Porter Cable, and they are sending me a replacement guage. According to the output regulator, the cut-off pressure was right at 150 pounds and cut-in was near 120 pounds. The manual was easy to read and follow. The break-in procedure was simple and necessary. I believe it will operate a round head nailer and roofing nailer with moderate use as stated by the manufacturer. Both meet my needs. The noise level was not excessive, and a conversation can be carried without shouting.
I am very pleased with the performance. I specifically wanted an oil lube compressor for durability, and this model fits that requirement.

The Porter Cable logo was not put on with the greatest of care, but it hardly merits any bad criticism. For handyman work or specialty trim nailing, this compressor is ideal. It is well worth the 5 star rating.

Great design/performance, small QC problem
I bought this compressor to run Porter-Cable air nailers. The component layout is well done and compact. The regulator, cut-on/off control, and compressor are well protected. I like the single tank design better than the popular twin stack design (fewer welds to crack/leak). The handle extends out similar to that of a high-end travel luggage with wheels. The beefy tires allow it to pull over curbs, bumps, and up stairs with good ground clearance and roll-over stability. The metal plate on top is handy for storing the air hose. This will serve well for transporting the compressor to various remodeling jobs.

The compressor is quiet enough for indoor use; it doesn't drown out conversation in the same room. The first day of use, I noticed that the compressor would cycle on once every 1 1/2 hours, even with no use of the attached air nailer. Yet, there was no hissing sound from a leak. With the soapy water method, I found that the safety valve threads were leaking air, and the large threaded coupling into the main tank (under the check valve) was leaking a lot of air. After depressurizing the tank, I removed the factory compound from the threads and put on fresh joint compound (teflon tape is a no-no for air applications). After that, the compressor could hold steady for 1-2 days---no pressure drop at all. The factory joint compound looked as though it was put on too sparingly, but even then, it seems like a QC check would have found the two air leaks just by doing a pressure leak-down test.

The compressor is powerful, and rebuilds pressure for each cycle in only 10-15 seconds. At around 150 psi, the capacity is a lot --- it only cycled on 2 to 3 times a day when using a 18-gauge brad nailer. Since this compressor is oil-lubricated, it has a higher duty cycle than the oil-free version (will help when using framing nailers). The literature for this 4.4 CFM@90psi compressor rates it for only 1 framing nailer, even though similarly sized previous models with slightly less CFM@90 are rated for 2 framing nailers. I called Porter-Cable support to get an explanation. The guy provided the crucial data: A framing nailer such as FR350A only consumes 0.06 CF of air per nail. It's not the stated number of nailers that matters, it's the nail rate... 4.4/0.06 = 73 nails / minute or more for all attached nailer(s), plenty of capacity for my needs.

The tank pressure regulation is supposed to be 150psi (cut-off) and 120psi (cut-on). The indicated tank pressure was more like 145 / 115, but the manual indicates that the 150/120 spec is approximate. The deviation could be in the gauge rather than the controls. Anyway, what matters more is the accuracy and stability of the output pressure, which worked well.

The manal is well written, and its procedures (such as break-in) are very important to follow. Even though this is my first compressor, the manual is thorough enough in describing the dangers (inherent to all compressors) to make me feel comfortable using it.

The front console is easily removed (insert air hose between console and compressor), for remote regulation at tool use site.
Despite the minor air leaks that got past QC, I still give this product 5 stars for its design, performance, and oil-lube cast-iron cylinder durability .

It rolls!
The only unit of its type I've found that rolls over rough terrain in a balanced fashion. Easy to move around indoors and out. Powerful motor and compressor. Have used it to run two nail guns at the same time without excessive run time. Came fully assembled and ready to run...just had to fill with oil that was included. Runs on a 15 amp electrical circuit with no problems. Heavy duty, high quality piece of equipment that runs circles around similar units I've used. ... Read more

Amazon.com Review

This is a workhorse of a saw, and it definitely lives up to theSkil name (the company that invented these saws in the first place).This latest version of the famous Skil 77 takes all the power andtorque the original is known for and packs it into a lightweightmagnesium housing, bringing it down near the weight range of sidewindersaws. Grasping it by both handles, the saw balances well, and thenotches in the shoe give a good guide for 90- and 45-degree cuts. Ithas a 2-3/8-inch depth of cut at 90 degrees, and 1-15/16 inches at 45degrees. We liked the quick blade height adjustment mechanism and theangled wrench, which helps prevent skinned knuckles during bladechanges. We couldn't feel any difference in performance between thisSkil's 13 amp motor and others drawing 15 amps. Be prepared for aslight twist when you first flip the switch, but after that, it's asmooth machine made right here in the U.S. --Kris Jensen-VanHeste ... Read more

Features

• Diamond arbor
• 13-amp motor provides 4,400 rpm
• Worm drive gearing for more power and torque
• Lightweight magnesium housing
• Push-button blade lock

Reviews (30)

Biggest , baddest , beefy,bulletproof,best bang for the buck
No body but no body builds a better saw than the people who invented the thing so long ago. Yeah , other companies make fine tools. But none better than the skill mag 77. Dewalt tried to copy the design , it was a flop. So they came up with their new hypoid framing saw that doesn't even compare for durability. Milwaukee makes an even bigger wormdrive with a 15 amp motor . It's an also ran. Makita made a super duper hypoid gear saw that stripped gears like they were going out of style. I'll admit that their new one is a lot better than the first but it's still not a skil.Unless you live on the east coast , when you drive by a construction site, 9 times out of 10 you're going to see a worm drive skil saw. There are reasons why .They are the most durable. They run the smoothest. They are the most powerful. I conducted a test of several framing saws. I ran all available wormdrive and hypoid gear saws as well as the Porter Cable blade left 15 amp saw with marathon blades down 16' 2x douglas fir as fast as I could without tripping a breaker. My partner timed me. The skil was the fastest by over a second. Then we switced places. Same result. At the time we had no preference for brand. In fact , we were hoping the new Dewalt would be the best ripping saw.With its bright yellow color and its 15 amp motor, we thought it might be. Not! The 13 amp skil blew everything away. I must say we were impressed. I continue to be to this day. The mag 77 might be heavy but not overly so. In some instances the weight is an advantage. if you are cutting close to the ground , tilt the lumber so the saw is going down. It will glide through with no effort. The length of the saw is also a plus . When crosscutting sheet goods it is much easier to go all the way across from one side without changing your position. The in line design also makes it easier to follow a straight mark on your material. The depth markings are a nice feature for a rough reference point. I have a few minor caveats though . The aluminum shoe isn't as tough as the steel on the older saw. The cords crack pretty bad just past the strain relief. I don't know of many power tool cords that don't though. I think my Bosch and Hilti cords are in tact. If you want a 15 amp motor, a blade brake, a rafter hook or a lightweight package , this is not your saw. If you want the most powerful smoothest running most durable workhorse of a saw then look no further than the skil 77 original or lighter mag 77.

Not a weekend warrior saw!
I didn't do any research when I bought this saw. I didn't have to because everyone I knew then was already using it. It is two pounds lighter than its predecessor but still a heavy saw.
I recommend the Tool hangers Unlimited 21087T Original Worm Drive Saw Hanger for this saw because it comes in handy to hang the saw on a joist or whatever. I use the same hanger on my Hitachi framing nailer.
The blade that comes with the saw last about an hour (a slight exaggeration) but that is the way it is with most blades shipped with new saws, just chuck it and you're in business.
If this is a first time saw purchase you might note that this saw has a lot of torque and actually twist in your hand and toward your body on start up if you are right handed. Not such a big deal unless you pen the guard up like most everyone does with this saw.
Dewault has what they think to be a superior saw and I am seeing it used in the trades a little now. I have tried it and I liked it but who knows if it has the durability of this saw?
The weak point of this saw is its guide or shoe if you prefer to call it that. You have to be careful not to bend it when you sit it down or load it into the van or truck. I did examine the shoe on the Dewault but it appeared to be the same weak design.
However the Mag is by far the best saw I have owned.

why would you buy something other than this
I will keep it short simple my company runs 45 - 50 of these saws every day i wouldnt buy anything other than this saw its light powerful and never dies if you keep a sharp blade and lots of oil in it

Skil HD77M
I really like this saw. The blade is on the left, it is lighter than the other wormdrive Skil makes, and I can't get it to bog down or burn up. I have a Dewalt framing saw that I have used for years and love, but I like this one better. I do recommend the saw hanger, though. It is a nice accessory. You really can't go wrong with this one.

Just Thinking
Skil cornered this market long ago, undisputed.

I would not buy any other manufacturer's 7 1/4" saw!

Remember to change the oil

... ... Read more

Features

• Low noise level at only 87dB for quiet operation
• Large capacity blade cuts 6-1/4¿ at 90° and 4-3/16¿ at 45°
• Weighs only 28.7 pounds for ease of operation
• Electric brake for maximum productivity
• Powerful motor delivers 1,800 max watts out

Reviews (2)

Big, Big saw
This is THE tool for cutting 4xs and 6" Glu-lams. I was surprised at the smooth opperation of this saw on doug fir glu-lams and SYP 4x8s. The 32 tooth blade is the correct unit for very good cuts while framing. The only thing I do not like about this tool is the thumb safety button. Re-locating it to the forward handle would be a big help and ensure that the operator keeps both hands on the saw when starting it. I found myself using my left index finger to press the "safety" button to start each cut, therby removing my L hand from the saw. My right thumb is too large to work the [safety] button.

Tough Jobs demand tough tools
The 5402na is defintly a powerhouse. It slices through 6x stock
with ease. The electric brake stops the blade on a dime and the blade stablizer is wonderful. I strongly reccomend this saw for anyone who works with 6x or 8x stock on a regular basis. It really saves time and effort. ... Read more

Product Description

Discontinued Sell Until Gone: X. Item Info: The revolutionary Hoover FloorMate cleans, washes and dries hard surface floors with patented SpinScrub Brushes. 13-inch cleaning path,? Dual function dry/wet operation with beltless design ,? Deluxe grip with solution trigger ,? Includes: Specially Formulated 8 oz. Lysol and 8 oz. Old English floor and wood cleaning concentrates ,. ... Read more

Features

• Convenient wrap around cord storage
• Great for cleaning hard floors (wood, linoleum, etc.)
• Both wet and dry pickup functionality
• Vacuums, washes, and dries the floor
• Sturdy at 43-3/4 inches tall, 11-1/2 inches deep

Reviews (486)

Fantastic new gadget!
My entire house is hard floors (hardwood, tile and linoleum) and for a long time I couldn't even stand to walk around the house in bare feet because I never felt like the floor was clean. The hardwood floors had been covered with carpet for 30 years before I moved in and all that caked on and set in dirt never seemed to go away. As much as I like for things to be clean, I HATE to clean. The Floor Mate has been a godsend for me! I can use the Floor Mate without sticking my hands in dirty water, but still get that "mopping on your hands and knees" clean - and in half the time! I love the fact that you can dry vacuum, wet scrub and wet vacuum at the touch of a button with one machine. AND by the time you get halfway across the room, the first part you cleaned is almost dry.

One of the best parts of this is that not only does it work well but this sucker is easy to clean! The tanks snap on and off and all you have to do is rinse them out and snap them back on. The thing is clean and ready to be put away in 5 minutes.

Another thing I worried about was whether or not it would leak. With hardwood floors you don't want to set a vacuum in the closet if it's going to drip because it will damage the floor. Somehow this machine does not drip once it's been emptied. I do use the wet vacuum as the last step before I turn it off so I suppose that helps.

Long story short, I think the Floor Mate is wonderful and I would highly recommend it to anyone who wants a clean floor but doesn't want to do it the hard way!

Four and a half stars really...
I use my floor mate on vinyl kitchen flooring and I have to agree with the positive comments already given by the other reviewers.I won't bore you all to tears by saying the same thing in some new way.What I do want to mention is that I only give this thing 4.5 stars because the dry vacuum mode is not all that great.If you have a few crumbs in the middle of your floor this will pick them up no problem.If you have a few crumbs around your baseboard or in the corners (as many of us do), this thing will drive you mad as you try unsuccessfully to pull those crumbs.Eventually I give up and sweep with a broom first and then use the scrub/wet vac settings to produce a very clean floor.Its a small complaint but one I though worth mentioning.If the vacuum power on this thing were a bit stronger, it would easily be 5+ stars!

A must buy
I bought this anticipating having alot of tile in my new house and Ilove it before I have the house!It works great on all kinds of vinyl and if you have a pet its great because you can vacuum up the fur.It hards to get it all up with sweeping or swiffering alone, but this sure does the job!!

Its OK
I have had my floor mate since Christmas. I love the way it cleans. It DOES leave my floors beautiful. On the otherhand. It is a PAIN to lug around. It is pretty heavy considering a swiffer wet jet does about the same job. I use the floormate about once a month for kitchen tile and hardwoods throughout the house. Otherwise, it is much easier to just get out the wet mop for everyday dirt. <br /> To sum it up...too expensive for what it does...still have to clean up the machine afterwards.

Excellent!
Within its abilities, this is an excellent tool to keep around.I have a dog with muddy paws, and white(ish) linoleum in the kitchen that she comes in through.When it rains (or has rained) she comes in and puts muddy paw prints all over the kitchen floor.No problem!I keep this in the kitchen, it's already plugged in, so I pull it out, run it, and within 5 minutes the floor is clean again.Not just wiped up, but actually scrubbed clean even with cold water.I have problems with my knees, so getting down and scrubbing is not something I would do.This vacuum has enabled me to do things I can't physically do.

Hot water does seem to work better on tough stains, and I have found it is better to use my Dyson "Animal" (available at www.amazon.com, target, sears, and a few other places - search for "Dyson Animal") vacuum to get the dog hair and other debris up first. ... Read more

Features

• Tapping block included
• Powerful
• Easy to use
• Tool-free adjustable base will install 1/4-inch through 1/2-inch laminated flooring from almost every manufacturer
• Drives staple at a perfect angle

Reviews (7)

Throw away the glue, buy this tool
This tool enabled me to take on more than I would have had I continued to use glue like they told me to do at Home Depot. The first room I worked on I used glue and decided I had to find a better way, this was it.

The flooring went down easier, the finished product was much better, and the frustration level went down.

The hardest part was learning how to load the staples. After that it was a snap

An Excellent Choice
You can not go wrong with this stapler! It is easy to setup and performs flawlessly. I have done several-hundred square feet of 3/8" engineered hardwood flooring without a hitch. I highly recommend this tool!

The Perfect Choice
The S3297-LHF flooring stapler did the job! Beats gluing. I have layed over 500 square feet of the 3/8" engineered flooring without any negative issues with this stapler. Looks like I will be laying flooring in more rooms in the future, according to my wife. This was the first flooring that I have put down and it turn out to be a professional job, thanks to the S3297-LHF Bostitch Stapler. This is the tool to buy if you want your floor layed correctly.

Needs a case.
I bought this stapler after using a Porta-nailer to install 1000 sq. ft. of hardwood laminant flooring. The Porta-nailer was bulky, hard to use and couldn't do the last 3 rows since you have to hit it with a hammer to drive the nail. With the S3297-LHF-2 I could do upto the last row which of course had to be face nailed. I would recommend this to anyone who has to lay laminant flooring. The only thing that disappointed me was that it doesn't come with a case for storage and the keeping it in the cardboard box beats up the box.

Easy and Great
I purchased this to install 3/8 engineered flooring and it is very easy to use. Loading is simple and fast and the instructions are brief and clear. I have installed 150 sq ft out of 500 sq ft total and the only problem I have encountered is running out of staples and not realizing it until I am a few boards down. Don't know how to solve that. ... Read more

Amazon.com Review

For a burly saw with a big blade, DeWalt's 12-inch compound miter saw is surprisingly lightweight (40 pounds) and portable. This saw makes smooth cuts through the thickest of stock, crosscuts a two-by-eight with ease, and--with its extra-high adjustable fence--miters crown molding up to 6-5/8 inches nested vertically against the fence (a timesaving feature that's reason enough for some trim carpenters to buy one). The fence also slides away for bevel cuts.

What impressed us the most was the weight and balance of this saw: the blade lowers easily into the cut, bevels are easy to set, and the miter gauge swivels smoothly. The saw's nine positive miter stops (detents) let you lock into the common angles quickly, but you can still dial in a 1/2 degree off the detent without the gauge dropping back into the stop. The detent plate is made of sturdy stainless steel, too, so it's hard to imagine it developing any slop even after years of use. The gauges are easily accessible and easy to read (what's more frustrating than having to lean around the saw to set on angle?). The saw miters up to 48 degrees on both sides and bevels left to 45.

Unlike some of their competitors, DeWalt mounted their saw with a burly blade guard that retracts smoothly and doesn't interfere with your line of sight. DeWalt's D-handle design favors right-handers, although the trigger's wide enough to use fairly easily with your left hand when cutting left-side miters. The saw doesn't have a safety switch--which, frankly, is fine by us, since some safety switches can be downright dangerous--but it's something to consider if you're doing residential or remodeling work where children might stumble across your tools. --Jon Groebner ... Read more

Features

• Features tough ball-bearing construction, and weighs only 40 pounds
• 15 amp motor features an electric brake for quick blade stop. Bevels 0-45 degrees to the left
• Stainless steel miter scale with 9 positive stops for cutting common angles
• Extra tall sliding fence allows 5-1/4" crown to be cut standing vertically

Reviews (59)

DeWalt 12inch miter review
The saw works great, simply put. It's very well made, strong, and very accurate. As with any adjustable new power tool, it is highly adviseable to check it's alignment. All you need is a square and torques bit,(not included with my saw). The head tilts very smoothly,(a must for accurate work), the miter detents are right on target. To my knowledge, Dewalt has the only adjustable miter detent settings available. When wear occurs over time, the stainless scale is adjustable , keeping the accuracy in check. The high back fence works real nice when cutting crown molding, especially when used with with the optional crown stops. They are worth the price. A tip here, cut you some angle blocks from pine,what ever,(37.5degrees) an lay against the fence, this will ensure very precise cuts. The standard 60 tooth blade is also very good for most cutting, it has a negative hook for beter control when cutting. I have had this saw for 18 months without any complaints at all. The compound adjustment works very easy, but before sawing on the compound, check your yellow plastic strips as they may be to close, as you will cut into them. They should be as close as possible when normal cutting, but after you change to a compound cut, they wil get cut. When changing the blade, remember the blade retaing bolt is left hand threads. The dust bag works the best on any saw I have tried. Power, it has plenty, and the brushes in the motor are very easy to change, no special tools required. To some up, It's (in my opinion) the best buy of any miter saw, especially when all the features are compared, and it's AMERICAN MADE. what else can I say, but watch your fingers. I now have the 12 inch slider, but that's another story.

Good Saw
I have had my saw for 2 years and use it ofen. My first recomendation should you buy this saw is to take the blade that comes with it off! I put a 96 tooth blade from Freud on the saw and it made a huge difference. The saw is comfortable to use and has sufficient power. It will bog down cutting larger pieces of hard wood. I really like the D-handle design. The detents are very nice, the saw locks positevly in place. It is easy to adjust the detent plate to achieve perfect miters, nothing is more annoying than 43deg angles that are supposed to be 45deg. The blade does seem to have a slight wobble when trimming the ends of boards. Lately my saw has developed a squeak when it winds down after making a cut. The bearings seem smooth when the blade is rotated by hand, so I do not know what the squeak is. I think the quality of this saw is good for the price. If I were to buy a miter saw again I would buy a sliding compound. The extra cutting capicity would be nice. A better dust collection port would be nice on this saw, the hose hook up is small and some of the dust shoots past the dust box.

Excellent saw
A major remodel at home finally convinced me to pull the trigger and buy a high-quality miter saw. Based on the reviews and research I read here and elsewhere, I chose the Dewalt 705S and I have not been disappointed.

The saw cuts smoothly, strongly and precisely. The ability to positively lock in the most common settings is handy, it makes basic work go very fast. You hear it click in and you know it's right on with no fuss. The high fence means you can handle tall stock easily. It also lets you dial in very precise angles when you need it. I've been doing a bunch of finish work in a remodel of an older house where it seems like there isn't a straight, true wall in the place, and this thing's ability to actually give me a real 43 degrees when I need it without any fuss has been wonderful.

For compound cuts, the saw will lock down very easily, and the knob to lock the compound angle into place is huge and very solid. It's not quite as easy to set the compound angle as the basic miter, but it's not hard, either.

It seems very solidly put together. The fence is very sturdy and nicely made and designed. Working with long stock has not been a problem for me because the fence works very well. The motor has plenty of power, even thick hard-wood cuts easily. However, get a high-quality extension cord if you need to use one. The motor is a real monster and a regular cord I was using slowed down cuts in hard wood noticeably, leaving less clean edges. With proper power, the stock blade it came with cuts very nicely, even for trim work. It's heavy enough that it feels solid when you are working with it, but it doesn't kill you when you want to carry it around. Little touches like the power cord and plug being super-heavy duty lead me to think I'll be using it a long time.

I can't say whether it's better than other saws out there, but I am very satisfied with it. I'm not a professional and this saw may have been a bit of an extravagence for even a serious D-I-Y guy like me, but I think it is a very good, well-designed product and I can recommend it without hesitation.

Perfect
I bought this saw at a the local Home Depot and haad no problems with it so far. I'm just a kid and i've already installed trim in my parent's basement after a flood and it looked perfect. The standard blade, 60 teeth, i've counted all of them, that comes on it is enough for trim work but the more teeth, the better. This saw gets plenty of use, and it still cuts a perfect 90 degree angle since I got it out of the box. I recommomend this to any one looking to buy a compound, not that small nor light, miter saw. I would have bought the sliding, but unfortunately, that is way too expensive.

Rock Solid Performance
This saw does everything I've asked of it, comfortably and consistently. I've chopped everything from 1X2 lumber to 4X4 PT and even aluminum. The big blade is key - you can get by with a smaller blade but it should be a slider, which costs more. The saw is easily portable and locks down for transport. ... Read more

Product Description

Porter Cable 362VSK 4" x 24" Belt Sander Variable Speed ... Read more

Features

• Powerful 12.0 amp motor provides 20% more power than before
• Motor is located directly over platen for maximum performance and perfect balance
• Variable speed dial is conveniently placed on the handle allowing belt speed adjustment from 1,000 to 1,500 SFPM
• Designed for flush sanding up to vertical surfaces

Reviews (3)

almost good
I've owned this sander for a couple years, but not being a big fan of belt sanders it has spent much of that time wishing I would notice it. Sporadic use made me feel that it was a worthwhile addition to the toolset, but it wasn't really tested until recently. Retired now, I volunteered to install an unfinished red oak floor in my son's family room, and having the time I decided to use the PC 362VSK for the sanding phase. I consider this a serious use of a belt sander. Here are my thoughts so far:

The tool is heavy (as we all know), so its weight (combined with the proper belt grit) provides the necessary "pushing down" force. Belt change is easy. Belt tracking is also easy to set and even if tracking wanders (not often) the easily-accessible knob makes it a non-issue. The balance seems to be good. After doing the entire floor (3 grits) it was still going strong.

Now for the negative, no stars (not even a glimmer) ratings: the dust collection is pathetic. That useless bag sticking up there getting in the way, coupled to the tool with an ineffective ball thingy that's difficult to use (and has no seal) is..well...pathetic. The dust bag will eventually fill, but this is purely coincidental...not to be confused with a dust collection system that actually works. And as far as I can see the port isn't designed to be connected to a separate vacuum...I duct-taped the hose of my Fein vac to the port and that worked well, but c'mon...duct tape?? (BTW if you take this route also tape the power cord to the vac hose making it essentially one unit...much easier to manage).

The other major issue is the sanding shoe...it warps, as another reviewer reported. Mine became convex, so the sander "rolled around" on the platen digging in and not sanding flat. Some time ago I had purchased some carbon impregnated fabric from Woodworker's Supply that was designed to be used on sander platens, so I took the metal shoe off, fitted a piece of this stuff to the cork shoe, and it worked fine. I wouldn't recommend this machine until PC includes the carbon shoe as standard. If you do buy it get the carbon shoe at the same time and send the metal one to PC with some appropriate suggestion as to what they might do with it.

This tool can do the job, but out of the box I don't consider it ready for a serious sanding project. You have to figure out how to deal with dust collection because Porter Cable hasn't, and you have to get rid of the metal shoe. It's probably one of the best 4x24s out there apart from these issues, but if mine ever goes to the boneyard I'll be tempted to try the Bosch.

High quality
I have had this sander now for 10 years,and have put many hours of use on it. Absolutely no problems with reliability,no problems with the platen.This is a heavy sander,so I use it on larger surfaces; the vac bag really works.If you have a lot of surface to sand down, this will do the job.

Great sander that gets the job done.
Finally decided to buy this sander, was waiting for others to review it first.Bought it at Home depot, since I needed it immediately for subfloor preparation.It does everything that is promised and it definitely has enough power.Although I found myself using it on high speed.Getting the belt tracking takes a bit of practice but stays centered otherwise.I used it all weekend sanding OSB underlayment for our subfloor in preperation for laminate flooring.It did everything I had hoped for.It did not remove material as fast as I though it would even with 60 grit belts, but this is in comparison with a floor sander, so no fault of the product.Only reason why I rated 4 is because of the sanding shoe that comes with it.I read some other posts on similar sanders and some people had problems with the sanding shoe warping.Well I had that exact same problem with this unit.So I highly recommend getting the graphite impregnated sanding shoe along with this sander.Once the shoe cups in the center, it is essentially useless since there is no more contact with the surface, other than the edges.This thing does get very hot quickly, which would explain the shoe cupping so fast.Light work would probably not see this cupping so soon, but since I was sanding floors, it was immediate.The dust extraction works good, it actually sucks the dust into the bag very well, as compared to other sanders.It is heavy as you hear from others, but this comes in handy where the weight may do some of the work for you by staying in one place.I paid the same price for the sander as amazon had listed, but I also had to pay tax.But got a 10% off lowes coupon from ebay and used it since HD takes competitors coupons, so was less than amazon.Overall I am happy with the unit. Just to give you an idea of how powerful this thing is, it was able to drag me across the room while on my kneepads and I'm 160 lbs.It was kind of fun, when I was done sanding one area, I would use the sander to drag myself to the next room and continue working without having to stand up. ... Read more

Amazon.com

Here’s huge cutting capacity in a surprising size. This 8-1/2 inch single-bevel miter saw really does cut a 3-inch post in a single pass, just like DeWalt says. And it’s also the only saw its size we’ve seen that will trim 3-1/2-inch crown molding vertically, because of DeWalt’s taller fence. With its smooth slide action, you’ll choose this over your table saw when it comes to cross cutting—-even a 12-inch board. It’s got all the features of the bigger, high-end saws, and then some. Five preset bevel stops zero your blade in at 0, 33.9, 45, 48, and -2 degrees, and there are 11 dead-on accurate miter stops at the most common spots: 0, 15, 22-1/2, 31.6, 45, 50 (left), and 60 (right) degrees. What we like best about this saw is the awesome ergonomic details. Anyone who’s used comparable saws repeatedly will tell you that the vertical handle causes some fatigue, especially on saws with a safety button. But this saw’s got a horizontal handle, keeping your hand and arm in a more natural position, cut after cut. Most saws’ miter adjustment involve turning a knob a few revolutions to lock and then to unlock the miter setting, but this DeWalt has a really nice cam lever lock that eliminates all that twisting and is just as reliable. This saw does throw a lot of dust, but we’ve not seen a saw that doesn’t (even those with dustbags still make a mess). We’d recommend building a little jig to hold your extraction system hose close by. This is a fabulous saw for the contractor. It weighs only 43 pounds and is easy to tote because of the handle. But it’s also the perfect choice for the woodworker. An aside: DeWalt makes a great miter saw stand that fits this saw like a dream.--Kris Jensen-Van Heste ... Read more

Features

• Includes saw, 30T carbide blade, and blade wrench
• Capacity to vertically cut 3-1/4" base molding and 3-1/2" crown molding nested vertically
• Bevel-stop system with manual override provides five pre-set bevel stops at 0, 33.9, 45, 48, and -2 degrees
• 11 positive miter stops including 0, 15, 22-1/2, 31.6, 45, 50 (left), and 60 (right) degrees
• Push-button miter cam lock for better ergonomics

Reviews (7)

Good but not great
Let me start off by saying that I have yet to find any miter saw that I would rate at five stars(although I do believe I rated the 12" Dewalt slide at 5 stars) because every manufacturer does put profit above product. However, I do like this saw very much. Slide is smooth, fence height good(when will Makita and Hitachi finally get the fence height right and even on both sides), lever action miter lock is awesome(knobs stink), blade deflection is good(it is only a 8-1/2 blade afterall), overall a really good saw. Dust collection complaints are irrelevant, as anyone expecting a slider miter saw to have good dust control lives in the world of clean radial arm saws too. I have yet to figure out what a "material hold down clamp"(or work clamp) is, but if I ever do, it means that I cut off on of my arms/hands and should not by using this saw anyway(we pros dont have time for clamping down wood prior to cutting it[short pieces should be cut from a long one, afterall]). I would buy another one in an instant.

Nice saw for cabinet/furniture makers
I've had this for about 6 months and it's never let me down. It takes a little getting used to if you've never used a sliding miter saw before, as the technique is somewhere between a radial arm saw and a normal fixed miter saw. As a couple of other reviewers pointed out, you have to make sure you slide the saw all the way home or you'll leave a little bit uncut.

One thing I've found is when I'm cutting narrow planks (4" or 6") I've gotten into the habit of pulling the blade toward me past the front edge of the piece, dropping it down, and then sliding it back through the piece - instead of just plunging the blade straight in, as you'd do with a fixed chop saw. This seems to significantly reduce bottom tearout.

It's undeniably a very pleasant tool to use; if you've only used saws that have a vertical handle you won't believe the difference the horizontal handle makes. The switch is well designed, it's not easy to trigger by accident but not fatiguing to hold. The action of the slides is smooth as silk, and setting the miter angles is quick, easy, and very positive. The motor has plenty of power for any kind of wood I've ever sent its way.

The 8 1/2 inch size has some advantages - the blade seems to be more stable, even without a stabilizer, than most 10" blades. Also in my experience 8 1/2" blades are a little cheaper than the equivalent 10" blade. But, it won't cut a 4x4 (or a 2x4 on edge) in one pass - a 10 incher will. Whether or not that matters depends on the kind of work you do.

You'll want to replace the blade that the saw comes with, it's fine for chopping up 2x4s (but if that's all you want to do you don't need this saw) but not good enough for finish work. There aren't a million blades available for this size of saw, but there's a decent selection - although not all the catalogs carry them. My favorite is a 60 tooth DeWalt finish blade that you can find most anywhere for about 50 bucks and does great work for me in all types of hardwood. Freud makes one that's pretty good as well. Forrest makes one of their chopmaster blades in this size, I'm sure it's great but it's $100+ and since I'm happy with my current blade I've never tried it.

Overall fit and finish is very nice - as you generally expect from contemporary Italian manufacture. After taking it out of the box, I went over it completely with my machinist square and couldn't find anything out of alignment. The only quality complaint I have is the crummy screws holding the blade guard on - blade changing is not exactly a snap with this saw and they really don't help.

There's no clamp included, unlike some other manufacturers - since I prefer to keep all 10 of my fingers I bought one - but they soak you on this item - $35!! Actually I bought two but you only need one - you hardly ever use both at once and it takes a second or two to swap it from one side of the saw to the other. Also, while it holds well, it's a screw type and I would prefer some type of cam action - I think that would be faster and easier to use.

But overall if you want a really sweet, pleasant to use saw and you don't normally need to cut large timber, I'd recommend this saw - I'm certainly very happy with it.

dewalt 8-1/2' miter saw
Overall I think this saw is an excellent saw,it cuts smooth and acurate and is lightweight.Ther are a couple of things I was dissapoionted with,first of all the if you are going to do any kind of finish work you need to replace the factory blade which is only good for cutting 2x's and a good blade is going to cost you and extra $100 or so.I was also dissapointed that the saw was not manufactured in the USA,the technical details provided in the review stated it was, and that played a large part in my descision to purchase this saw.Last of all the saw could of least came with dust bag which costs an additional $15.Whith the addition of a new blade and dust collection the performance of this saw is very good.

Nice saw
I picked up the Dewalt 712 to replace my 10" makita. Cuts smooth and was cutting square out of the box. The one thing I found was when you finish the cut, you have to make sure the saw head has been pushed all the way back or else it leaves a small amout of material uncut. They need to push the fence forward a 16th of an inch. Also for $400.00 they should include a dust bag! Overall a good quality saw.

A Really Nice Saw
I got my DeWalt saw a month or so ago for use on job sites. The first project I did with it was to build a 100 square foot sauna with three rows of benches.

The saw was dead on accurate right out of the box. I was immediatly impressed with its light weight and compact size. The saw cuts beautifully and slides nicely on the rails. It is also much quieter than other miter saws I have used. The cutting capacity rivals bigger saws, except you can't cut a 4X4 in one pass (something a trim carpenter/woodworker like myself never does). The horizontal handle is very comfortable to use, even after long days. The depth stop is perfect for jobsite dados.

Dust extraction was good. It does not come with a bag, but I noticed most of the dust escaping through the port. When I hooked the saw up to my Fein vacuum, the dust collection was very good.

The supplied blade is suitable for most carpentry, but is not sufficient for nice trim work. The nice thing about an 81/2 inch blade though is that a new one won't break your wallet like the 12 inch blades will.

Overall, a very nice, light, and compact saw, which exceeded my expectations for the $399.00 price. It is the first saw that I have seen designed for the woodworker or trim carpenter. If portability is important to you, this is an outstanding saw. If you are going to set it up relatively permanently in your shop, then I would suggest a 10 inch slider (Makita makes a nice one). I can't imagine a need for a 12 inch slider. ... Read more

Amazon.com

Arguably the best portable model on the market. To best minimize snipe, Makita came up with an innovative four-column design and fortified it with diagonal cross supports to stabilize the cutterhead while the patented Interna-Lok cutterhead depth adjustment secures the head while cutting. We particularly like how easy it is to adjust the depth scale and gauge. The depth stop makes sure you never overplane multiple pieces. The infeed and outfeed tables are supersized - another little perk we liked. Often, changing planer knives is an ordeal, but Makita's quick-change system and externally accessible brushes minimize your maintenance time and get you back to what you really love doing. The unit is relatively lightweight as these machines go, and at 83 decibels, is among the quietest of its kind. Still, please use ear protection when you're using this little beauty. --Kris Jensen-Van Heste ... Read more

Features

• Supersize infeed and outfeed tables maximize work support
• Compact and lightweight for easy transporting to the job-site
• 15 amp motor delivers no load speed of 8,500 rpm
• Table size of 13 by 30-3/8 inches
• Patented Interna-Lok automated head clamp minimizes snipe

Reviews (25)

Worth the Money
Much like other reviewers, I have a small shop and make personal furniture and cabinetry. I too agonized over the purchase of a planer. The obvious dilemma is between a floor model 15" and a portable 12". The Makita is more costly than most of the portables, but less than half of the stationary 15" models.

After reading of the trouble others have had with the Delta (and my own negative experiences with Delta) I decided to spring the extra bucks for the Makita quality.

Great decision. This planer performs flawlessly. As long as you keep each pass shallow, snipe is of no concern, and I also agree that you have to cut the ends off the stock anyway. Snipe won't mean a thing if you have a board end check on you after you have completed a project.

I too reserve the other 5th star for longevity, as I have only had the planer for several months. As for the dust hood-I plan to save myself the money and just make my own. Any true woodworker can handle the fabrication necessary for a rectangular plenum with a round outlet-it's held on by a couple of thumb screws.

I say you can't beat this planer.

Well worth the price !!!
I recently read an article in one of the Popular woodworking comparing many of the 12" bench top planers. I had my heart set on a Delta, since my experience so far had been good. Boy did that article change my mind in a hurry. They has only good things to say about this planer. The only downside was the price. They said that they loved the planer, just couldn't justify the price. Well, I could. I'm sick of getting exacty what you pay for. I'm willing to spend a little more and get top quality. If you are too, this is the planer for you. Got it (from the tool-crib BTW) on Sat and spent the next day planing some 4/4 red oak. Beautiful finish !! A fine sanding is all that's required. Also, the stop remembers what your last, final, thick- ness was, which came in handy as I needed another 3/4 board and had already put the planer away. Snipe was a minimum, maybe 2-3 inches on the feed end and, as long as you're careful, none on the back end. Take some advice, get yourself a nice pair or dial calipers. I got a 6" Starrett from the tool crib here and it, in conjunction with the planer will give you the _exact_ thickness that you need. I'm sick of going to the lumber yard and ordering 1/2", and some are a little strong of 1/2" and some a little shy and none of your dados are fit like the test cut did. Another cool feature is the thickness dial on the crank. Using the calipers, you find that you need another 1/32" off the side. Set the 1/32" mark on the thickness dial, turn the crank until the '0' matches up with the mark and it takes off the required amount, no more, no less.

Makita 2012NB 12" Portable Planer
A joy to use. Simple, straight forward and without all the marketing hype of some of the other machines. Stock feeding is a very easy task. Transport is positive without the bother of a lock each time you make a pass. Crank adjustment is very easy to adjust for the smallest of stock removal. The depth stop is easy to use. The unit worked perfectly right out of the box. Read the instructions, plug it in, turn it on and your good to go. Fit and finish is top drawer and it's hard to imagine how it could be better. Unit produced just the smallest amount of snipe at about 1 1/2 inch from the ends. No big deal, a few passes of 220 grit sandpaper and it's gone or , I perfer to just cut it off. I only mention the snipe because it's there, not because it's a problem. Again, not worth taking a star away. This has fast become my favorite power machine, and I have them all. Go buy it. Simple , straight forward and rugged. It's a winner.

Great planer!!!
I am glad that I had bought this planer. I have planned some 10ft long 8/4 mahogany boards with it and the finish was excellent. Sniping was minimal and in most cases nonexistent if I support the board correctly while feeding it in and as it comes out. I did buy it new from Amazon and used it without any need for adjustment. I think the quality is very good and the planer is very quiet comparing to an old portable Delta planner that I had.

A Fine Planer
I bought this planer based on several factors. In no particular order they were: Makita's reputation, the reviews I read at this site, and its claim as being one of the quieter planers. I have never used another planer so I can't give a first-hand comparison. I can say, however, that I have been very happy with this tool. I used it quite heavily for building a workbench from hard maple. It is quiet, as advertised. I found it very easy on the ears. I had no problems with snipe, though I agree with other comments on this site that problems with snipe are overblown. Just trim your boards to finished length after planing. But as I said, I never had any problems. The blades were easy to change, and in general I found the tool accurate and easy to use.

For the most part, the finish was ready for sanding. However, when planing some of the heavily figured maple there was some tear out. I have since found out that this is to be expected and one should not expect a final finish from a planer on figured wood. In fact there is whole time-honored regimen for surfacing figured wood involving high-angled planes and scrapers. Just thought I'd pass that along.

If you've never had a planer before you will probably be surprised at how much of a mess they make. You will most likely want to add dust collection at some point in the future, so if you don't buy the dusthood now plan on buying it at some point down the road. ... Read more

Features

• ASME coded 4-gallon OSHA recognized tank
• 4.5 cfm
• Dual soft start valves assist in cold weather start up
• Cast iron cylinder enhances pump life
• Oil lubricated pump allows for long life

Reviews (30)

DeWalt takes a classic to a new level
As a full time contractor working alone I am always on the lookout for tools that will make the job go faster and easier. Last yearI spent many months researching a replacement for my ailing Campbell-Hausfeld oilless compressor. Originally I figured the CH had a higher air output, needed no oil changes,would work on slopes and start in cold weather. ...After forking over the big bucks and putting it to work for DeWalt's 30 Day trial period I couldn't believe I'd gone so long without this compressor. The unit has loads of features and advantages.
1) First of all the Emglo name on the unit reassured me that I was getting a tool built by the industry leader with a great reputation for tough, dependable compressors. The first day on the job proved it with quick cycling times and ample air at all times. The unit just purrs and runs smoothly.

2) Portability. I do a lot of work in luxury high rises and I've often left the compressor at home rather than drag it down endless corridors. This unit carries like a briefcase (a 60 pound one) with an ergonomic handle and good balance. The unit's flat design makes it easy to bungee tie to a light weight luggage carrier ...It can carry the whole unit with hoses and nail guns. I can't overemphasize how much easier this makes my job. I've paid for the compressor already in labor savings by bringing it to every trim job.

3) Eye candy. Let's face it, this is a sexy looking unit. I've had othe craftsmen come over and ogle the compressor and ask questions about it, but mostly admiring it. Customers have commented on it, how quiet it is and how professional it looks.I am percieved as a serious craftsman based on my setup (along with my Senco SFN-40)which is good for referrals.

In short, this is a serious tool for the professional contractor with loads of power(delivered air), durability, great design and looks. DeWalt took a classic, the Emglo 790, and improved the power output layout and design. My only complaint is the air release lever, an otherwise solid unit mounted on the underside of the tank. The opening is too narrow for your hand and the sharp stream of air can actually cut your skin. In addition the compressor shoots out small chunks of ICE from the tank creating dangerous projectiles that will cut your hand or riccochet into your eye. Don't know why it does that but just beware and open the valve SLOWLY.
Finally, I have a compressor that won't roll around in the back of the truck knocking off gauges and connections as I drive through the city. Hats off to DeWalt and Emglo for a match that combines legendary durability with great design.

it's too much!
This is a great compressor. It's quiet with plenty of power and the portability is great.. plus all the dials are in the right place with easy visibility... however there's the exception of one valve and a reset switch.. There's only an inch or so for clearance for the valve and I could only get to it with a screwdriver. Secondly, the reset switch is located too close to the cylinder housing and cooling system which are about as hot as the sun when the machine is running.. plus the switch itself is a little tiny.. certainly too small for the average construction guy with gorilla hands. I've one additional bad thing to say and that is that DeWalt could use some better paint to go with such a great looking compressor! there's already rust on my cylinder housing and I only purchased the unit a week ago! But overall, I would recommend it highly... namely because it's so dependable, powerful, innovative and the recovery time is great.

A pleasure to own!

Hassle free! I've owned one of these for about a year now and couldn't be more pleased with the purchase.

The biggest complaint I have about other compressors is the portability of them. This unit, although like most, heavy, is designed well for moving from site to site. The sleek design means that parts or not going to get stuck on a pant leg when you pick it up or bash into your kneecap. I have found it most helpful to actually pick up the unit by the handle and then kinda hug the unit, holding it close to the chest. This helps to center the weight to my body and I can then lug the compressor up several flights of stairs without passing out.

The main reason I bought this unit over cheaper compressors was the recommendation to the brand names of DeWalt and Emglo. I now see why others recommend the Dewalt and Emglo brand.

It's not uncommon for someone to come on the job site and drool over this unit. Kinda funny how a guy can fall in love so fast with power tools!

If you need a great unit, this is the one to get! Enjoy!

roofer wayne
I used many compressors in 28 years of roofing. This is my 3rd emglow and 2nd dewalt. My first emglo lasted 12 years. My first dewalt is fine, I just needed another one because of expanding business. The only thing that was wrong with the first dewalt was the air regulator started leaking and had to be replaced. Other then that, it worked every day for two years so far,that with two or three roofing guns going which is like four framing guns and I did not notice it starving for air.This compressor is the best and durable for the Professional.

A nice small compressor
I bought this air compressor to do light construction work. I have used it for finish work all the way up to roofing and framing. I have to say that I was a little skeptical at first about using a small compressor for roofing or framing nailers but I was satisfied after the first time I used it. This compressor has impressed me more than most of my other tools. It runs smoothly and doesn't have to run that often. It recovers very quickly and is very user friendly. The controls are easy to find and use. I am able to carry it with one hand. I have ran the compressor off of 100 foot 12 gauge cord and haven't noticed any problems at all. I have a gas powered Emglo compressor and the quality is outstanding. The only downfall that I can find is that I think the power switch should be located on the front panel instead of on the side and thats just a personal preferance. Other than that it has been a really great compressor and I would recommend this compressor over any other in its class. It may cost a little more but you won't have to replace it like the other compressors. ... Read more

Features

• Includes 1 year limited warranty on parts and accessories
• 11.5 amps, 0-2,900 spm, 1-1/4" stroke
• Keyless clamp and shoe with variable speed trigger
• 180 degree joint adjustment and 360 degree blade rotation
• Includes case

Reviews (2)

Well Designed Tool
I bought this saw a year about a year ago. I needed to cut a 2" cast iron pipe that came up vertically through a 12 inch square concrete hole. The cut had to be in the bottom of the hole and be at a perfect 90 degree angle. Theoretically the same cut could have been made with a modified hacksaw, but it would have taken 50 blades and two days. With this saw it took two blades and 10 minutes. This was the only power tool that could perform this cut, which it did with some effort on my part The important part was that this cut eliminated the need to delay the project for three days to remove a hot water tank and a three foot square area of concrete in order to use a standard reciprocating saw or grinder. Since then I have found this saw to work great as both a standard reciprocating saw and as a special purpose saw.

Most of the time this saw is used like any other reciprocating saw - fully extended and straight. However, the one time that you need to cut something that is not in front of you and perfectly square to you, you will see where this tool shines. The head on this saw can be positioned in many angles and the blade literally spins 360 degrees. This adjustability does two things. First, it effectively makes the saw shorter, which was why it worked where no other could in my plumbing example. Second, the saw can be adjusted to literally fit the angle of the material that you are cutting, no matter where you are in relation to that material. Often, when you use a reciprocating saw in a remodel situation, you don't have the luxury of standing dead square in front of a level cutting surface.

This saw gives you more control by allowing the blade to be adjusted so it is square to the cutting surface when the operator cannot get into that same position. Since, the head on this saw that holds the blades can be positioned at almost any angle relative to the trigger handle, this means that you can get the saw's shoe, into a position that allows the shoe to rest on some part of the project; thus improving control AND safety. For example, with this saw, you can cut fit the saw head (not the whole saw) between 2x4 studs on 16" centers. This allows you to make more precise, square cuts in existing walls (say that have sheet rock on one side that you do not want to disturb) for modifications to the framing. Reciprocating saws have always been good for remodel work, but this saw is amazing. This saw has a system for loading blades that is quick and secure. The saw is smooth running and the variable speed control is .... well.... smooth. You can make cuts with this saw that, until now, were done with handsaws, drills, chisels, brute force and circular saws held in dangerous positons.

I have thought about writing this review since I bought this saw over a year ago and used it on my plumbing project. I have used it many times since and each time I think "I am going to write a review on this saw because people need to know that the extra money spent on this saw is well worth it for the added functionality." I used the saw AGAIN this weekend and I was AGAIN reminded how well designed and built this saw is. If you plan to use this saw for remodeling you will not be dissapointed.

BEST SAW EVER MADE , MOVE OVER MILWAKEE
I HAVE BEEN A CONTRACTOR AND HOME BUILDER FOR 30 YRS AND I HAVE ALWAYS BEEN A MILWAKEE SAWZALL FAN,BUT HAVE ALWAYS ADMIRED THE TIGER SAW FOR ITS SHEAR POWER.THEN CAME THE VARIABLE ANGLE TIGER SAW AND I HAD TO HAVE ONE. WELL THE GUY WHO DESIGNED THIS SAW IS ONE OF THE GREATEST MINDS IN TOOL DESIGN. THIS SAW CAN BE ARTICULATED INTO ANY POSITION YOU NEED. IT GOES WHERE NO OTHER SAW WILL GO AND ALLOWS YOU TO HOLD IT IN POSITIONS THAT MAKE IT EASIER AND MUCH LESS DANGEROUS TO THE OPERATOR AND THE POWER IS FANTASTIC, IT CAN'T BE STOPPED. THIS IS NO GIMIC, THIS IS A SAW IN A CLASS ALL BY ITSELF, THERE IS NO BETTER SAW OUT THERE.THIS SAW IS WORTH TWICE THE MONEY,DO YOURSELF A FAVOR AND SPEND THE EXTRA MONEY ,ITS WORTH EVERY PENNY AND YOU WILL NEVER BE SORRY. ... Read more

Amazon.com Review

A six-power Briggs and Stratton Quantum motor powers this trimmer mower as it effectively and evenly trims tall weeds, sharp corners, and wet grass. The trimmer mower also excels on flat plots, hills, and other rough terrain alike.

The trimmer mower provides three cutting length options from 1-1/2 to 5 inches. An extended trimmer head permits the mower to reach grass under low-hanging bushes while simultaneously protecting users from flying debris. The trimmer also comes equipped with a head clutch to enable a safe, quick, and easy engine shutdown. The 14-inch ball-bearing rear wheels resist rust with a sturdy composite nylon construction as they help push the trimmer with a minimum of friction. The trimmer mower comes assembled with a complimentary oil supply. Troy-Bilt offers a limited lifetime warranty and a product registration program. This trimmer mower covers a width of 22 inches. --Jessica Reuling ... Read more

Features

• Mower covers 22 inches; limited warranty and registration program available
• Trimmer mower with 3 cutting lengths; accommodates most lawns
• Rust-resistant ball bearing wheels with composite nylon construction
• 6 HP Briggs and Stratton Quantum motor; no assembly required
• Trimmer head permits mowing under low bushes and deflects flying debris; oil included