Amazon.com

You can tell from the price that this is not the choice for industrial-grade users, but it's a decent enough hose for the home woodworker who's using a wet-dry vac or small dust-collection system. We like that it's so flexible, turning corners in a small shop without struggle. And we like that it retracts to a fraction of its extended length, saving lot of space. We wouldn't recommend connection to a larger dust-collection system, though, because the material is not rigid enough to withstand a huge amount of suction. Though we didn't experience any collapse during suction, we think it's possible with a larger machine. Still, it's a nice, sturdy hose for the home woodworker, and the price is right.--Kris Jensen-Van Heste ... Read more

Features

• Self-grounding
• Black wire-reinforced vinyl
• .05 inches thick
• Strong, flexible, and durable
• Will not collapse, even under heavy suction

Reviews (23)

Good for exhausting - not a useful intake for collection.
Even after reading the reviews, I thought it would be worth a shot to buy 50' of hose for an incredible price. It arrived in a rather small box for a 50' hose, so I had my doubts as to the likeliness of it serving my shop. After taking it out of the box it reminded me of a Slinky with a thin plastic membrane. Remarkably the hose did extend to 50'!

My application was primarily to connect my floor sweep and move it about the shop during cleanup. Unfortunately when the hose is connected to a dust collector (mine is a 2hp model) the hose will constrict (like an accordion) and collapses back to about four feet. Next, I tried to use it with some of my connections, but the same problem prevented the hose from being practical.

Lastly - I decided to use the hose as an exhaust for moving air through the finishing area. Works fine for this application. I would highly recommend using the Jet hose or solid tubing for a DC connection. This was not a wise investment however it was also not too costly.

Perfect for my application
This is a fairly light duty hose. I would not recommend it for any sort of a permanent installation (use something more substantial). For temporary hook-ups it's PERFECT!. I bought some "FazLok" connectors from Woodworker's Supply to temporarly connect my dust collector to my mobile table saw, band saw, and drill press. I'm using a 15' length of hose which fits into a 3 foot length of 6" plastic drain pipe for storage (including the FazLok connectors). I've attached a short piece of copper wire to the the wire in the hose and connected the wire to a magnet (to attach to the metal part of my table saw). It takes only a second or two to attache the FazLok connector and ground my system. Highly recommended!

Great for moving from tool to tool
I have a 600 CFM vacuum (JET), a garbage can separator, and then 50' of this. I move it from router to planer to jointer. It works very well. My only caution is : Open it in a well ventelated area - the plastic odor from mine was VERY strong for about 48 hours. (Now there is no odor.)

Perfect for the Job
When I read the other reviews I had my reservations about purchasing but thought, "What the heck" for the price you can't go wrong. I used it to run my main lines on the ceiling to my Y and T connections. 50' WOW does that go a long way in a good size shop. I used a different type of hose for my drops so I have no problem with collapsing.

Inexpensive, works well.
Okay, I don't think it takes a rocket scientist to figure out that fifty feet of tubing has to pack flat in order to make free shiping affordable, so I think the whining about it being flimsy is unwarented. The fact is that it is very light weight, and it does tend to compress when you turn on your collector. Clearly, if you anchor the tubing with hangers, this problem won't occur. I view this product as a good deal at less than half the price of the more ridgid tubing.

The one thing that causes the loss of a star: It smells really funny when you take it out of the box. After out-gassing for a few days, it was fine. But, people with chemical sensitivities should be weary. ... Read more

Features

• Works with all portable miter saw stands
• Portable-Move it where you need it, when you need it.
• Durable-HIPS plastic hood and airflow chamber with powder coated steel pedestal engineered for long life
• Adaptable-Attaches to any vacuum system.
• Sized to accommodate all miter saws

Features

• System features allow positioning of dust hood behind saw at all angles
• Installs on work benches as well as Rousseau mobile miter saw stands, Models 2875, 2875XL, and 2850
• Attaches to any vacuum system--5" hose maximum
• Durable HIPS plastic hood and airflow chamber with powder coated steel support structure engineered for long life
• System is sized to accommodate all miter saws

Features

• Compatible with all Discovery Series Roombas
• 3 pack of replacement filters
• Prevents dust and dirt from escaping vacuum system
• Changing filter every 1 to 2 months recommended
• Remove dustbin and slide filter out to clean or change

Features

• Allows Turbo II to be used as a clean up vacuum
• Basic clean up kit for 9-55-13 Turbo II vacuum
• Fits directly onto the standard 1 ¼" hose
• Basic kit of most commonly used accessories
• Includes 2 metal extension tubes, air reduction handle, upholstery nozzle, crevice tool, wet brush, floor brush with wheels, and an anti-foam filter for water pickup

Reviews (6)

These attachments are expensive but useful!
I have owned my Turbo II vacuum for a number of years now, and I will admit that I was never willing to spend the money for these attachments. It is true that there are many lesser vacuums out there that include the tools, but I always told myself that I would rather have an awesome shop vac and no tools versus a so-so vac with tools. Recently, I finally coughed up the money for these attachments and I am thrilled to have so much more versatility when using a favored tool. I have had absolutely zero problems with any of the attachments. It is true that there are no "positive lock" mechanisms on the mating pieces, yet I have never had the attachments come apart even after hours of continuous use. I have cleaned our cars, sucked up sawdust, and vanquished cobwebs all to my great satisfaction. The adjustable "bristles" on the floor attachment make pulling stuff off of carpet (such as dust/dirt/woodchips in a car trunk) a painless task.

If there is a downside, it is the lack of a convenient way to store these tools "onboard" the Turbo II machine (as some other shop vacs offer). For now I am keeping the attachments in a drawer and the metal extension wands lean in a corner. But I guess this is more my problem than a criticism of this tool set. Overall I am thrilled with the performance of this product and I recommend its purchase without reservation!

Adequate tools; poor value
I am disappointed in the Fein tool kit for the following reasons: the devices are lacking a basic positive-lock connection feature (often incorporated in the form of that classic little round-topped chrome button that springs up into a hole on the mating piece), and they generally are (aside from the floor attachment and chrome tubes) very light gauge material. I have a ... little Eureka "Mighty Mite" compact vacuum, and its tools are actually more substantial than the supposedly "industrial grade" Fein products. Ultimately I imagine these accessories will work fine, but I am actually amazed at the high price relative to what is provided. ... Final complaint - I really can't imagine that anyone who orders the Fein vacuum cleaner wouldn't want the tools - they should come with the machine. Separating them out seems to be a way of keeping the machine's cost down - ultimately an artificial savings.

Great Product
The Wet/Dry kit works great and was produced with a higher quality material than I imagined. I was also leary about buying from Amazon and using the free shipping but, the kit shipped within two days and arrived within five days. All in all, shopping at Amazon couldn't be easier and the Fein Wet/Dry kit is worth every penny.

Good variety of quality tools
This kit includes a good variety of quality tools.

The parts go together easily with only slight pressure. They stay together when you want them to, but you can still take them apart. Thus far, I have not had them stick together so tightly that I have had to struggle to disassemble them. This was a common and recurring problem with my old VAC.

I especially like the floor brush. It has two rollers at the back of the unit that are larger enough that you can easily push it around in the typical shop floor dust and wood clips. It also has a built-in lever that permits you to lower bristle strips along the front and rear edges. The benefit is that for shop applications, you can leave the bristle strips retracted and the small wood chips won't have anything to cling to. You'll vacuum them right up. But for interior use or for fine particle dust, the bristles help attract and pick them up.

This package is a nice addition to your Fein VAC.

Big Price BUT Good Value
Thi of the kit is tailored to the needs associated with a woodworking shop. I find nothing wrong with any component of this kit. Quick clean up is the outcome of using this kit. There is a tool for every need and each is of high quality. ... Read more

Features

• For use on DW735 only
• Utilizes fan-assisted chip ejection to exhaust chips into trash recepticle
• Tube and bag material resist wear and tear
• Drawstring on bag for secure fit over any portable trash recepticle
• Easily transportable

Reviews (2)

DW7353 Makes Chip Collecting Easy
Not having space for a dust collection system, the blower on the DW735 helped me decide on the DW735 planer. The planer works really well at evacuating the chips and chip collection is a necessity. I tried using a trash can that I had but some dust came out around the handles; the handles were molded up near the can opening keeping the hood from a tight fit.
I bought a 33 gallon Roughneck wheeled container at Lowe's that had a lip all around the edge and that solved the problem. I put plastic bags in the can and the hood over everything and get no escaped dust and easy emptying.
The instructions say to not let the hose lay over the side of the can. I put a "J" hook in the ceiling and use a rope loop to hold up the hose so it's adjustable and out of the way, simple and effective. This thing works just as it should - I'm very pleased.

DeWalt DW7353 Chip Collection Accessory for DW735
Wow! Am I glad I got this with my plainer. It collects almost all the chips and dust from the plainer. The drawstring top for the trashcan makes it very versitile. I have a very, very small shop so the ability to use a smaller trashcan adds to it's value. Using the plainer without it creates a huge mess. If you haven't used a plainer before and are forewarned on the amoung of sawdust you'll still be amazed. If you don't have a central system to hook your plainer up to, I highly recommend getting this. It will be worth every penny. I got is even though another rater talked about the hose inconviently located right above the outfeed table and it can get in the way, but I simply pull the hose up over the top of the machine and it's no problem. Again, if you don't have a central collection system...get this. ... Read more

Features

• Do not use with cloth filter bag
• .3 Micron HEPA filter for Fein vacuums
• Mounts onto float valve cage on bottom of vacuum head
• Requires turn screw (TII3001) and Flange (TII3002) for mounting
• Must be used with paper dust bag

Reviews (3)

Better deal elsewhere
The HEPA filter works great but is limited to only dry pick-up and using an expensive special paper bag which does make for easy clean up but does limit versatility.

I bought a Cleanair Gortex HEPA filter from Lowes for $29.99 that fits the Red-Coded Craftsman vacuums. This forms a perfect seal and works for wet and dry pick-up. You only need to either plug the hole in the bottom of the filter with a plastic plug you can get at Lowes or any car parts store or use a 3/8" x 2.5" carriage bolt, nylon washer, and wing nut to more securely fasten the filter. Better filter, better price, easier wet/dry vacuuming.

Expensive, but they're your sinuses and lungs...
When you buy a woodworking tool, the manual doesn't warn you, but if you do a bit of research you'll discover that prolonged exposure to finer dust (smaller than 1 micron, or the size of smoke particles) can lead to sinus and lung problems; some serious. Most shop vacuums come with filters that retain dust as small as 5 microns (a piece of copier paper is about 100 microns thick). If you want to protect yourself, you need a HEPA filter, which will retain particles smaller than 1 micron.

This filter is pretty expensive, but without it, why buy the vacuum? For woodworking and sanding, a shop vacuum without a HEPA filter is probably a waste of money.

Commercial dust collectors large enough for larger power tools, that remove particles smaller than 2 microns, are not yet available at home shop prices. So even with a HEPA filter, if you're using a power saw, planer, etc., you should also wear a respirator with HEPA filters and have something to clean your shop's air before it goes into the rest of your house (and before you remove your respirator). The alternative is to shell out more than the cost of the power tool for a suitable industrial grade dust collector, or to build your own (there are instructions and parts on the Internet).

works well
I was concerned that the HEPA filter would reduce the vacuum. Although it must somewhat, I could not detect it. Also the filter is protected by the cloth filter that comes with the machine. Very nice! ... Read more

Features

• Durable 15-foot hose
• Includes three 18-inch poles, which allow extended reach for vacuuming high ceilings
• Perfect for unexpected water spills
• Kit will fit all wet dry vacs

Reviews (1)

Perfect!!!
Great addition to any dust collection system. Excellent for use with hand held tools or just for clean-up. The hose is the perfect balance between rigid/flexible, and is heavy duty enough to drag around the shop floor. While flexible, Mr. Nozzle does not contract under vacuum pressure.

The black adapter end fits 4" to 2+1/2" reducers and 2+1/2" outlets. The grey adaptor end fits 2+1/2" to 1+1/4" reducers for hand tools or vacuum attachments. ... Read more

Features

• Increases the efficiency and capacity of dust collection systems
• Cyclonic action drops out large particles
• Fits on a 30-gallon metal trash can
• Molded ABS fitting

Reviews (19)

I Can't Believe I Waited So Long to Get This!
If you are doing any dust collection, particularly from stationary machines, you've got to get one of these. It lets the large chips from planers, jointers, lathes, table saws and floor sweeps drop into a 30 gallon galvanized trash can (that you supply). This is so much easier than endlessly dumping the bag on a dust collector.

Another great reason to have one of these; how many times have you accidentally sucked up an important piece of hardware and spent hours sifting through a dust bag trying to find it? Metal parts will drop to the bottom of the barrel where they are easily found. This also saves the impeller blades of your dust collector from damaging impacts. I always empty it before sweeping the floor, just in case I encounter a stray chunk I want to recover.

You should keep the barrel dumped fairly often, as this will increase efficency. The only thing better would be a cyclone system, but they are more costly and take up more space. This unit is also quite portable, which is handy in a one-hose shop.

I don't think you'll be disappointed if you put one of these to work in your shop. You'll wonder how you ever worked without it.

A Must Have for any DC system.
I thought the dust collection system was the best thing a ever got, but after adding this to the system, the Woodstock Dust Collection Separator is the best thing I got. The bag in the DC machine is not the easiest thing to change, not impossible to change, just not easy. The Woodstock DC Separator lets you collect and empty in a 30 gallon garbage can, very easy to remove the lid and empty the can.

The Separator will collect the large particles and some dust, allowing the smaller dust to be collected in the DC bag. But don't wait for the garbage can to fill up before emptying it. The fuller the can gets, the less area for the particles to drop, so empty the can about at half full. When running my lathe or planer, that could be quite often. BUT, it is easier than emptying the bag, OR sweeping them off the floor without a DC system.

No Dust Collection System is complete without this product.

Not as pictured........
First off let me say that it works and that it does so pretty well. However.....the item is certainly not as pictured. The way it fits my 30 gal metal trash can reminds me of a little kid trying to walk in his/her parents shoes! Waaaay too big, overhanging each side by probably 6" or so. I finally had to bungee it on the can so that it would stay in place. As an earlier review noted, connection of the hoses is not that easy either. If you have the clear, wire-reinforced hoses you can thread them in like a screw. Otherwise you may need to add some sort of connector.

I don't know how I got along without it!
This has to be the best value in my shop. I used two spiral 4" connectors on the inside of the lid to connect to hoses outside. These spiral connectors let the hoses pivot. I don't disconnect the hoses but use 4" adaptors to hook to hoses from each machine.
I've filled up a 33 gallon trash can three times and haven't had to empty the dust bags on my Jet vacuum yet.
But, even better, I can vacuum up all those little scrap pieces of wood and stuff and not wince everytime they hit my blades.

Great idea, but...
For that price it should come with the hoses show in the picture and have a way to clamp them on at least, boy I would have been pissed if I had ordered this and didn't get the stuff shown in the photo! ... Read more

Features

• Filter bags for the Porter-Cable 7812 wet/dry vacuum
• 2 ply construction for durability
• 10-gallon capacity
• 3 bags per package

Reviews (1)

Innovative
I bought my Porter Cable vacuum because it is a quality product that PC put some thought into as to what it would be used for. This is also true of something as simple as the bags for the vacuum. They are of a heavier paper then I have seen on other products which should allow them to hold up to the nasty stuff. The other feature which is very simple but VERY useful is the fact that you can seal the bag as soon as you remove it from the vacuum. Typical Porter Cable product, excellent. ... Read more

Product Description

3 - Pack of dust bags for 9-55-13Turbo II Vacuum ... Read more

Features

• 3 - Pack of dust bags for 9-55-13Turbo II Vacuum
• Designed for use with a 1 Micron or HEPA filter
• Collects larger particles for two-stage dust collection
• Disposable

Features

• Do not use with cloth filter bag
• 1 Micron filter for Fein vacuums
• Mounts onto float valve cage on bottom of vacuum head
• Requires turn screw (TII3001) and Flange (TII3002) for mounting
• Must be used with paper dust bag

Reviews (1)

Good for Nasty Work
We bought and used this filter on our wet-dry vac for cleaning up our house. We're in the middle of some serious rehab, restoring our 1904 house to its original charm, grace and majestic beauty. (estimated completion date is 2097)

In the meantime, this filter does a good job of cleaning up the big ugly messes.

Before, when using our wet-dry vac without this filter (we used the traditional filters and even a paper filter) a cloud of dust would rise up out of the vacuum when you started it up.

With this filter in place, there are no large gray clouds looming on the horizon upon start up.

It says it filters down to 1 micron. The eye of an average sewing needle is 750 microns across and the period in written text at 10 font is about 400 microns. 1 micron is pretty tiny.

But as I understand, installing this filter on a wet-dry vac doesn't make it a HEPA vacuum, simply because there are other places on the vacuum for air leaks to occur.

However, as a rehabber, it is a TREMENDOUS help to add this filter onto your wet-dry vac. The filter we purchased is not suitable for wet applications. ... Read more

Features

• Reduces 4-inch OD line to 2-1/2 inches OD
• 4" to 2-1/2

Reviews (17)

Reduce Hose Size, Increase Air Suction
If you need to step down in the DC system, which is recommended, this works great. The ends are to size stated, the hose fit easily and the wire clamps put it all together snuggly. The fitting allows you to step down from a larger main line to smaller branch lines near the machine, thus increasing the air suction, where it's needed most, by the machine.

Does not adapt the JET 6" Jointer to a "standard" shop vac
This adapter had the proper O.D. on the 2.5" side so that the end of my shop vac. hose fit in properly. But the dust chute on the 6" JET Jointer I bought from Amazon.com has the same O.D. as the nominally 4" side of this adapter (so they don't fit together well). No big deal for me: what I did was take a thin-blade hack saw, slice four cuts at 90 degree separation in the walls of the ~4" end, slip it over the dust chut on the jointer, wrap duct tape around the outside of the adapter's large end (while attached to the jointer), and now I've got a removable adapter that actually works. If you can't find the right part (I could not, looking high and low), this is a reasonable solution for those who can handle the minor frustration of the imperfect solution.

The two most popular sizes can now talk to one another
This adapter is great for mating the popular 2 1/2" vacuum hose size to your 4" hoses. This 4" is a male end that will fit well into your 4" hose acting as a female, and the 2 1/2" end is a female that will receive your 2 1/2" hose as a male. :-) I don't know why that is so funny, but it strkes me that way. That is the best description I can give it. These Jet adapters fit perfectly.
To securely connect this adapter, I suggest that you buy the Jet wire connectors, instead of the standard band clamps. Since most dust collection hoses have a wire running through them, band clamps can not compress them. The Jet wire clamp goes around the wire in the hose, and it grips the material directly to the fitting. I tried using the band clamps, and after having to reattach them on a regular basis, I went to the Jet 4" wire clamps, that is why I am making such a big deal out of it. I have never had to retighten, or reinstall the hose on the adapter since. The wire clamps work perfectly. Highly recommended.

Fits great!
The description by Robert Feeser (one of the top 500 reviewers in Amazon) explains 'This adapter is great for mating the popular 2 1/2" vacuum hose size to your 4" hoses. This 4" is a male end that will fit well into your 4" hose acting as a female, and the 2 1/2" end is a female that will receive your 2 1/2" hose as a male. :-) I don't know why that is so funny, but it strikes me that way. That is the best description I can give it. These Jet adapters fit perfectly'.

Not as pictured
The adapter I received has a flat interface, not the funnel style shown. That makes a difference if using the piece with the airflow going from 4" to 2 1/2" due to increased turbulence.

If you're planning to use this downstream from large to small diameter then I suggest you find one that is indeed funnel-shaped. ... Read more

Features

• Fits all Dirt Devil bagless upright models made in 2003 and later
• Indoor air filter removes 99.97-percent of airborne matter down to 0.3 microns in size
• Helps remove dust, pollen, mold spores, smoke, dust mites, and other allergens
• Ideal for people who suffer from asthmatic or other respiration-related irritations
• Unique technology captures solid particles, which are not allowed back into the air

Features

• Allows one dust collector to be used with multiple machines
• Includes one 4-inch by 20-foot hose, 3 elbows, 2 T connectors
• 8 quick connectors, 4 blast gates
• 2 4-inch hose to hose connectors, 12 wall clamps, 14 hose clamps
• Hardware packs for wall clamps, screws, anchors

Reviews (1)

Good choice for a small shop.
After years of using a shop vac for dust collection in my small woodworking shop, I decided too spring for a dust collection system. I settled on a Delta AP 400 which has proved to be adequate, though just barely. I intended to plumb the collector system by buying the bits and pieces individually and improvising as much as possible to keep the cost down. However, I stumbled onto the Delta AP050 accessory kit on sale at Lowes. It seemed to have everything I would need in one box, so convenience won out over economy. The kit comes with four blast gates and twenty feet of hose as well as all the couplings, clamps and hardware to install the system. The only thing I will need to purchase are four inch to two inch adapters to match my router table and jointer. Accually, the price is not too unreasonable considering the number of blast gates, tee and elbow fittings, and clamps included. All in all, the kit is complete, of good quality, and not too expensive. Based on what I've seen so far, it's a good option for a small or medium shop. Now for the one beef I have that cost it a fifth star, there are no instructions, suggestions, or tips on how to set up a dust collection system. Admittedly, this is a minor complaint since there are many books and magazine articles on the subject. ... Read more

Features

• Black ABS plastic hose
• 4" (exterior diameter) by 10'

Reviews (2)

Don't Get Hosed !!
This is an excellent Dust Collection Hose. It does measure a consistent 4" and always fit easily over the connection fitting. It is somewhat flexible and very rigid, but will not coil back into itself. This might be a problem if you move your equipment back and forth.

The other hose options are a Clear Hose, which allows you to see any possible clugs and air blocks in the DC system. And there is a 50 foot coil hose, which is not as rigid, but it is sturdy and it will coil back into itself, allowing for the movement of machinery.

I used all three in my DC system. The clear hose where large particles would be generated (lathe, bore machine), the 10 foot rigid hose in areas that would always remain fixed in location. And the 50 foot coil hose (cut up, of course) on machine that I move back and forth from the wall to the garage floor. I don't have endless space in the garage for all the "needed" equipment I have to use.

All three hoses work just fine, no problems, no issues.

Works Great!
I use several of these hoses in my shop to connect power tools to my Jet vacuum system. They work great. They work the best with the wire clamps. I recommend using a distribution of rigid plastic or metal pipe to get to the woodworking machine, then use one of these hoses to connect the machine to the rigid system. These hoses also can be used to vacuum the floor or other areas but are a bit clumsey due to the large diameter. ... Read more

Features

• Wire hose clamp
• 4" diameter
• 5-pack

Reviews (7)

The Best For Hooking Up Hoses
I've tried the band type of clamp and they simply do not hold over the long haul. The wire clamps allow you to tighten the clamp down for a firm grip in the fixture. My opinion, the wire clamps are the best thing since sliced bread for hooking up a duct collection system.

The Best Clamp...The Best Price
If your hooking up a dust collection system, the proper clamps can make all of the difference. The standard band type clamps are not properly suited to the job. The unique thing about dust collection hoses, is that they are generally made out of smooth, slippery plastic, with a stiff wire running through them for support and/or grounding. This poses a problem for standard band clamps, because the clamp is too wide to get between the wires. Therefore you have a clamp pushing down on the wire. Since the wire is rigid and in a circle, you would have to compress the circle (ain't gonna happen). Therefore a wire clamp such as these, with twin rigid wires is just what the doctor ordered.
I tried everything from duct tape, which gets soft after a while and loses it, to band clamps. When I finally got a set of these, my hoses stay put, and they don't leak. They are easy to install, and you can put a good torque on them, and not have to worry so much about them messing the thread the way a band clamp does. With the Jet 4" wire hose clamp you are dealing with a nut and a threaded bolt instead of a screw and some sheet metal. Definitely a lot stronger with the Jet wire.
The bottom line, when attaching a 10 foot-4" vac hose to a plastic 4" fitting, you can pick up the hose, move it around, and not worry about the hose coming off, the way it does with the band clamps sometimes.
Great unit, great price, get a few extras. Hope this helps.

Hands Down - The Best Clamp
I read other reviews before purchasing this clamp and am really glad I did. What I like is that the wires make great contact between the ribs of the hose and screw down very tight. Later I purchased the flat band kind from a local store and agree that this wire type is much better. It's much beefier than I thought it would be. Definitely the best clamp I've come across.

Great product to get you to [a minumum qualifiying dollar amount]
If your close and need to get over [a minumum qualifiying dollar amount], this product will do it.

Free Shipping!!!!

Best clamps for 4" work
These are the best clamps for your 4" collection needs. Easy to attach, hold well. I have had zero trouble with these. They also provide excellent grounding points for your dust collection system. Overall and excellent investment. ... Read more

Features

• Basic cleanup kit for Turbo III Vacuum
• Tools fit directly onto 2-1/2" hose for Turbo III
• Includes 2 plastic extension tubes, and air reduction handle, a crevice tool, a round brush, an upholstery nozzle, a floor brush, and an anti-foam filter
• Allows the Turbo III vacuum to be used as a clean up Vacuum

Reviews (3)

Good tools
They should really be included with the vacuum but I am happy with quality. The tools are better than what you normally get for free with a shop vac. The floor tool is especially nice.

Pretty Standard Accessories--Flawed Handle Design
This is a pretty standard set of accessories one would expect for a shop vac setup. One could argue that they should, at the price of the Fein, be included, but they aren't, so just deal with it. :-)

The issue I have is with the design of the handle that is intended to connect the hose to the wands. It comes apart with the slightest downward pressure on the hose. I talked with Fein about it last weekend at the AWFS show in Anaheim, and they committed to get a fix for the problem.

Knowing Fein, they'll not only fix it, but fix it well and offer us a free retrofit, but until then, I can't recommend purchasing this set

Not worth the buy
One would think that with a decent vacuum comes decent accessories. Not in this case! A few cheap plastic parts that fail miserably to the task do a great disfavor to the name. The best piece of the lot, an angular handle that also doubles as a suction adjuster, does not stay connected to the hose due to a manufacturing deffect. The other segments also have a tendency to come apart with annoying regularity. I am sorry to say that this product seems to be an afterthought that skipped the field test altogether. Expect a recall! ... Read more