Product Description

Used in the production of dovetail joints for drawers and fine furniture. Suitable for routing wood, laminates, plywood and composition paneling. ... Read more

Features

• Angle: 14 degrees
• Cutter Dia.: 3/4"
• Cutting Length: 3/4"
• Overall Length: 2-1/2"

Product Description

Roundover Bits are used to make quarter rounds of various radii. Also used to soften edges, especially if making anything a child would use. Everyone needs a drawer full of these. So many uses we can't list them all. Order G3855 replacement bearing. ... Read more

Features

• Cutter Dia.: 7/8"
• Cutting Length: 3/8"
• Overall Length: 2"
• Radius: 1/8"

Features

• Rated for 15 amps
• The perfect auxillary switch for your router table
• Mounts anywhere on your table

Reviews (3)

Sweet Switch
I've been working on what I wanted in a router table for awhile and decided to built my own router table into the right extension of my tablesaw which I built to my specifications.
I wanted to use a switch and a miter slot and when I stumbled upon a BenchDog aluminum extrusion for the outer edge this was the perfect switch for it.
Although I struggled with the price and thought about other options I went with this.
You can bolt it to that piece of aluminum and you can move it slide and turn, depending on what side of the table you're going to work on. That was an added bonus for me.
So far so good. I have a router table that look like it was purchased. But then it was wasn't it, I just put it together and routed a hole where I wanted the plate to go. Could just buy the thing all done and saved some time? Well I did use better supporting material making it match my equipment and there's something about making your own stuff that's more satisfying. So much for saving money building yourself. But if I really was interested in saving money I could have just bolted the router to a piece of plywood and clamped it in a vise.

Good switch, but...
It's a good switch, but didn't install as I had anticipated.
I had intended to mount it on the bottom miter track slot, as per instructions. According to the specs for the switch, 'all new Bench Dog router tables come equipped with this slot'. However, the new Bench Dog RT150 ProTop I just purchased did not come equipped with this slot! I did not want to mount it on the fence. It was pretty easy to come up with a good alternate mounting solution. But, if I had known this, I would have purchased a less expensive saftey switch locally.
I guess the 'new' RT150 they sent me wasn't their newest.

Nice switch for a high price.
Like all Bench Dog products the quality and ergonomics of this switch are top notch. And like all Bench Dog router table accessories the price of this switch is a little steep. (Hence the 4 stars)
Installation was a snap and I love the option of either mounting it high on the router fence or low under the miter slot.
Use of the switch is straight forward and I like the safety button you have to depress in order to turn it on.
Sure beats squatting down to turn on the router! ... Read more

Features

• Adds Extended Tool Life In 18-25 Gauge Hollow Metal Doors
• Extenders Tool Life In Wood Lock Blocks
• 5 /12" Oal, Round Shank
• 2 1/2" Cutting Edge
• 1/2" Shank

Product Description

Industrial Grade Carbide Tipped 2-Fulte 1/2" Shank, Horizontal Raised Panel Router Bit, 18 Degree Face Cut, 1-1/2" Shank Length ... Read more

Features

• 2-Flute, Industrial Grade Carbide Tipped
• Overall Diameter : 3-1/2"
• Reveal : 1-1/2"
• Shank Diameter : 1/2"
• Radius : 1/8"

Product Description

The Door Templates are used to cut mating panel and rail shapes. The templates fasten to the work with double face tape, nails or our Frame & Panel Master. Our templates are thicker (3/8") and stronger than other brands of templates. Twenty templates per set. Designed for 9-1/2" to 22-1/2" (finished width) doors or frame & panels. Door Templates have our exclusive indexing fences to center and align the work on the template. Can be used without the Frame & Panel Master. The patented Frame & Panel Master serves as a work holding device - it clamps the work and Door Template together for machining. Provides a safe, secure, easy to control work platform. Insures consistent positioning of panels and rails. Faster than using double face tape or nails to hold the template on the work. Quickly converts between rails and panels. Use it for flush trimming parts to shape, but can also be used to machine the panel and rail profiles with appropriate bits. Jig base made of sturdy 3/8" phenolic. Patent # 5,960,843. This kit includes the 5430 Frame & Panel Master and the 5455 Cathedral Door Template Set as well as a FREE Video & Booklet. ... Read more

Features

• Kit includes: Free Frame & Panel Secrets Video & Booklet
• 5430 - Frame & Panel Master
• 5455 - Cathedral Door Template Set
• Lifetime guarantee

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Features

• Precision machined from solid 1/4" thick phenolic
• Featuring JessEm's exclusive TAB-LOC design
• Install and remove insert rings with the flick of the unique two-prong insert ring wrench
• Pre-drilled centerholes of 1/4", 1/2", 1-3/8", and 2-1/2"

Reviews (1)

A must have for the Jessem Router lift
If you are investing the money to get the precision of the Jessem router lift, then shell out the extra bucks to adequately support your work closer to the router bit. Reduces tearout and improves control. Considering the boardfoot cost of hardwoods, if you save a half a dozen board feet from being ruined by dipping of the work near the bit, you will more than recoup the cost of this item. ... Read more

Product Description

The most popular Roundover sizes in one set. Includes 1/8"r, 1/4"r, 3/8"r and 1/2"r. Complete with wooden box. ... Read more

Product Description

Woodline USA's 6pc Corner and Edge Beading collection is perfect for adding a unique decorative look to any project. This set includes 4 edge beading bits with 3/16", 5/16", 1/4", and 3/8" bead diameter and 2 corner beading bits with 5/16" and 1/2" bead diameters. All 6 bits also feature premium guide bearings for great performance year after year. Run any of these bits on both faces of any adjoining edge to create magnificent pencil moulding. ... Read more

Features

• Full Range of Corner and Edge Beading Bits
• Industrial Carbide Tipped - Precision Crafted Router Bits
• Lifetime Guarantee
• Rugged 1/2" Shank
• Euro Anti-Kickback Design

Product Description

It is designed for professional sign making and lettering. ... Read more

Features

• 3 Flute Carbide Tipped ; 60 Degree; 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length
• 1-1/4" Shank Length

Product Description

Beautiful mouldings and patterns are limited only by your imagination. This carbide-tipped bit produces wonderful custom work! Order G3855 replacement bearing. ... Read more

Features

• Bead Dia.: 3/8"
• Cutter Dia.: 1-3/4"
• Cutting Length: 1-1/2"
• Radius: 9/32"
• Shank Length: 1-1/2"

Features

• Double-laminated plywood tabletop (16" by 30" by 3/4")
• Recessed plate hole fits Oak Park 11" base plates (NOT included)
• Spacer fence (3/8") holes predrilled in tabletop for easy setup
• Wood reduces vibration

Product Description

Good for easy wood joining. Shearing cut brazed at an angle to assure smooth, clean cutting results. Can also be used for lap joints and biscuit joining.  By replacing the original bearing, Br-03, the rabbet depth varies as following:   Rabbet Depth Matrix ToolNo  Br-02  Br-10  Br-11  Br-12  Br-13  Br-14 3501 7/16" 5/16" 1/4" 3/16" 1/8" 1/16" 3503  9/16" 7/16" 3/8" 5/16" 1/4" 3/16" 3502 7/16" 5/16" 1/4" 3/16" 1/8" 1/16" 3504 9/16" 7/16" 3/8" 5/16" 1/4" 3/16" 3505 13/16" 11/16" 5/8" 9/16" 1/2" 7/16" ... Read more

Features

• 2 Flute Carbide Tipped; 3/4" Rabbet Depth; 7/8" Cutting Height; 1/2" Shank Diameter
• 2" Overall Diameter

Product Description

There are lots of fancy router plates on the market today & most cost much more. Ours will fit many of the popular tops on the market or one that you custom built. They come with built in levelers for accurate placement. Custom drill the size hole you need for your router & for the price, you can have one for each router you have ... Read more

Features

• Clear Lexan router plate fits most popular tops
• Size; 9" x 12" - 3/8" thick
• Built in levelers
• You custom drill the hole that you need for your router
• Great price, buy one for each router you have

Product Description

FOR SMALL BOAT PLANKING ... Read more

Features

• Cutter Dia.: 1-1/2"
• Cutting Length: 1/4"
• Overall Length: 1-3/4"

Features

• The ultimate panel cutting and routing accessory
• Protects your hands with a solid aluminum barrier
• Accommodates all raised panel bits
• Reduces fatigue by holding down the panel
• Includes 20" section of T-Loc t-track so you can mount it to fences of your own design or to other fences

Reviews (2)

Great product
I got this as a gift from my daughter last year but didn't have a slot in my router fence to use it. Finally got around to making some MDF fences with the right slots and found out this is a great product. I've always had trouble keeping the part I was routing down against the table and tight against the fence. This solves the first problem and helps with the second. It gives you a uniform depth by keeping downward pressure on the wood.It is easy to setup, takes about 5 seconds to set the proper pressure on the wood.

Two disadvantages keep me from rating it as 5 star. I tried routing some rail and stiles and found they were too thin and slipped under the guard. The second problem is when you want to adjust the router bit depth of cut, you can't see the bit so you have to slip the guard out of the way, adjust the depth, and then slip the guard back. This is fairly easy but annoying.
Even with these two disadvantages, this is the best product I've found for router applications. I especially like the fact that the bit is fully encased and dust collecion is greatly enhanced.

This thing deserves the design of the year award
I had bought the Bench Dog PL400 a while ago, and unfortunately it sat in the tube it ships in. Well I broke it out, and after using it, I am sorry that I didn't do it sooner. It is great. It will fit any type of fence with the standard T slot. The attaching nuts are included and the easy to turn and fasten tightening knobs do the job well.
The great thing about this piece of equipment is that it does such a great job of holding down your workpiece. If you have a 3, to 6 inch panel or greater, it will perfectly keep it mated to the table. That is in part due to the hard rubber strip that extends below the bottom. The cast aluminum plate is substantial. I was tongue and groove routing, 88 inch long boards, and when I got to the end of the board, the PL400 had no problem keeping it true to the table, even when I let go. So I had 3 inches of an 88 inch piece of cedar being held straight, and under all of that pressure, it was still flush for the bit.
The safety advantage is second to none. Since it completely covers the router bit area, it protects you from an exposed bit. It actually covers an area a few inches away from the fence.
It is usable on your table saw, router table, or anything that has a T-slot. No T-slot, no problem, it is shipped with an included T-Slot aluminum channel, so you can convert your fence to a T-Slotted fence. If you added a wooden riser-extension to your fence, this would attach right to it. It is not predrilled, so you can custom apply it to your needs.
I highly recommend it. Easily adjustable for just the right amount of pressure. It does the job more completely and uniformly than single featherboards. It removes and installs in about 30 seconds. It doesn't shift on you when larger stock is trying to move it.
If I was cutting different size pieces all day long, I would use a featherboard, because it allows you instant access to the bit, for setup changes. If I was making runs of lots of boards, I would use the PL400, because the 20 second additional set up time, is more than worth the benefits and advantages.
I plan on keeping mine handy, and using it a lot more from now on. Hope this helps. ... Read more

Product Description

Excellent for CORIAN® and other solid surface materials. Order G3857 replacement bearing. ... Read more

Features

• Cutter Dia.: 1-5/8"
• Cutting Length: 3/4"
• Overall Length: 2-5/8"
• Radius: 13/32"

Product Description

Roundover Bits are used to make quarter rounds of various radii. Also used to soften edges, especially if making anything a child would use. Everyone needs a drawer full of these. So many uses we can't list them all. Order G3855 replacement bearing. ... Read more

Features

• Cutter Dia.: 2-1/2"
• Cutting Length: 1-1/4"
• Overall Length: 3-1/4"
• Radius: 1"

Product Description

Roundover Bits are used to make quarter rounds of various radii. Also used to soften edges, especially if making anything a child would use. Everyone needs a drawer full of these. So many uses we can't list them all. Order G3855 replacement bearing. ... Read more

Features

• Cutter Dia.: 1"
• Cutting Length: 1/2"
• Overall Length: 2"
• Radius: 1/4"