Features

• 3 Wing, Carbide Tipped; Tongue Profile; 1-1/8" Cutting Height; 3/4" Bore; 2-5/8" Overall Diameter

Features

• 3 Wing, Carbide Tipped; Groove Profile; 1-1/8" Cutting Height; 3/4" Bore; 2-5/8" Overall Diameter

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 1"

Product Description

Used alone or in conjunction with our Panel Cutters, this carbide-tipped undercutter allows you to mill thicker raised panels to a standard 1/4" to match slots cut with our Stile and Rail sets. Perfect for raised panels thicker than 5/8". ... Read more

Features

• Cutter Dia.: 2-1/2"
• Cutting Depth: 3/8"
• Cutting Length: 1"
• Slot: 1/4"

Features

• Includes two popular accessories for Delta heavy-duty shapers
• Router spindle assembly allows the use of 1/4- and 1/2-inch shank router bits
• Mobile base allows easy storage and portability in smaller shops

Reviews (2)

Delta 36-887 shaper accessory package
I bought one of the packages recently and love the
mobil base. I have the same one on my table saw and
life is much simpler with them. The router spindal is
another story. It is of great quality but it has a
3/4 shaft. Now my Delta heavy-duty shaper model 43-379
has a 3/4 and 1/2 spindal with a 1/2 shafts. Since the
shaft size is not given in the promotional reveiws I
thought it should be. Great deal if it fits.

Using What I Have
I am very please with this accessory package. I have a small shop and the mobility offered by the base allows me to easily move the Shaper where needed and then back to the storgae area. I have found the base to very strong and well constructed. I have used the Shaper many times and the base shows no wear and tear. I have used a generic mobile base and find the one in this package far superior.

I am very pleased with the spindle accessory as well. I am able to use all of my router bits and door making kits without having to buy any shaper cutters. I may break down and get a set later though. The fit and finish of the spidle is great. It, along with my shaper, have given me results superior to work I have done in the past. ... Read more

Features

• 1/2" diameter, 2-1/2" capacity under the nut
• Installs easily in place of standard spindle
• Tapered shaft is notched for a slip-free fit
• Fits Delta heavy-duty wood shapers 43-445, 43-455, and 43-460

Product Description

These carbide-tipped shaper cutters are specifically made for use on shapers with 1/2" spindles. Smaller profiles are ideal for shaping small radii and for making picture frames. These 1/2" bore, 2mm thick carbide cutters stay sharp longer than the old HSS cutters and are priced right, too. Can be used in hard and soft woods and wood composite materials. 5,000-10,000 RPM. ... Read more

Features

• Cutter Dia.: 2"
• Cutting Length: 1/4"

Product Description

These carbide-tipped shaper cutters are specifically made for use on shapers with 1/2" spindles. Smaller profiles are ideal for shaping small radii and for making picture frames. These 1/2" bore, 2mm thick carbide cutters stay sharp longer than the old HSS cutters and are priced right, too. Can be used in hard and soft woods and wood composite materials. 5,000-10,000 RPM. ... Read more

Features

• Cutter Dia.: 2"
• Cutting Length: 1/2"

Product Description

Make the custom cabinets you've always wanted with these stile and rail sets. Our 6-piece sets include 5 cutters and one spacer. We also have 1/2" and 5.5mm cutters and spacers available for 3/4" bore only. Please order panel cutters separately. (See pages 384-385). ... Read more

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 7/8"
• Cutting Width: 3/8"

Features

• Set of three matched knives
• Cuts reversible glue joint profile
• High-speed steel for durability and long lasting sharpness
• Installs easily on cutterhead with existing set screws
• Fits Delta moulding cutterheads

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 2-7/8"
• Cutting Length: 11/16"
• Radius: 1/4"

Features

• 3 Wing, Carbide Tipped; Male Profile; 7/8" Cutting Height; 3/4" Bore; 3-1/4" Overall Diameter

Product Description

These new Mini Knives from Flexcut are an excellent addition to any carver's tool set. They have ultra thin blades for the lowest resistance when fine cutting is required. Facets on the smaller handles create multiple control points to allow them to be held in multiple comfortable positions. These are the finest knives available for doing small, intricate detail work. ... Read more

Product Description

Make paneling, wainscotting, decking and flooring with these V-match sets. ... Read more

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 3/4"
• Cutting Width: 7/16"

Features

• Precision machined for best results
• Enables you to use larger bore cutters on your shaper
• Must be used with flange bushings
• Covered by Freud's limited lifetime warranty

Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Product Description

Used alone or in conjunction with our Panel Cutters, this carbide-tipped undercutter allows you to mill thicker raised panels to a standard 1/4" to match slots cut with our Stile and Rail sets. Perfect for raised panels thicker than 5/8". ... Read more

Features

• Covered by Freud's limited lifetime warranty