Product Description

Build the entryway of your dreams using our 6-piece stile and rail set. Set includes 5 cutters and one spacer. We also have 1/2" and 5.5mm cutters and spacers available for 3/4" bore only. Please order panel cutters separately. (See pages 384-385.) ... Read more

Features

• Cutter Dia.: 3-1/8"
• Cutting Length: 1-3/4"
• Cutting Width: 5/8"

Product Description

MOULDING KNIVES CROWN ... Read more

Features

• Use with shaper cutters for template work
• Allows you to make arched cathedral doors

Product Description

Create your own custom flooring materials from standard dimensional materials with these carbide cutters. Designed for use with 5/8" and 3/4" lumber, these cutters are great for designing new floors or for creating replacement planks for repair and renovation. For use on 3/4" spindles. Tongue and groove are below center, so you can resand and finish a number of times. ... Read more

Features

• C2305/C2306 Cutter Dia.: 2-5/8"
• C2305/C2306 Cutting Length: 1"
• C2305/C2306 Cutting Width: 5/8"/1/2"

Features

• Cutter Dia.: 4-5/8"
• Cutting Length: 5/8"
• Cutting Width: 1-1/2"

Product Description

This handy little Flexcut draw knife was developed for fan carving but works great for skinning bark and rounding off corners. It is especially useful for peeling bark from small walking sticks and canes. Fits nicely into your tool roll. 3" cutting edge, 12" overall length. ... Read more

Product Description

These new Mini Knives from Flexcut are an excellent addition to any carver's tool set. They have ultra thin blades for the lowest resistance when fine cutting is required. Facets on the smaller handles create multiple control points to allow them to be held in multiple comfortable positions. These are the finest knives available for doing small, intricate detail work. ... Read more

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 15/16"

Features

• Precision machined for best results
• Enables you to use larger bore cutters on your shaper
• Covered by Freud's limited lifetime warranty

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 3/4"

Features

• This Solid-Steel Cutterhead With Your Choice Of Optional Hss Knives Can Make Rosettes Up To 3"
• In Diameter. Also, With The Optional Chuck Arbors You Can Easily Adapt Cutterheads Directly To
• Tailstock Or Spindle Tapers. Cutterhead Comes With Shank And Mounts Directly To Drill Press
• Or Wood Lathe.1/2" Shank

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 1"

Features

• Precision machined for best results
• Enables you to use larger bore cutters on your shaper
• Must be used with flange bushings
• Covered by Freud's limited lifetime warranty

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 3"
• Cutting Length: 15/16"
• Cutting Width: 5/8"

Features

• These Knives Will Produce Intricately Carved Rosettes Or Even Raised Panels On A Drill Press
• You Can Plane Smaller Stock By Using The Flat Profile Knife
• Knives Are Ground On Opposite Sides So Only One Knife Is Needed, 2-5/8"

Product Description

MOULDING KNIVES BASEBOARD ... Read more

Product Description

MOULDING KNIVES CROWN ... Read more

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 4-5/8"
• Cutting Length: 5/8"
• Cutting Width: 1-1/2"

Product Description

Used alone or in conjunction with our Panel Cutters, this carbide-tipped undercutter allows you to mill thicker raised panels to a standard 1/4" to match slots cut with our Stile and Rail sets. Perfect for raised panels thicker than 5/8". ... Read more

Features

• Cutter Dia.: 2-1/2"
• Cutting Depth: 3/8"
• Cutting Length: 1"
• Slot: 1/4"

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 1-3/16"