Product Description

BFT RESIDENTIAL SLIDING GATE OPERATORS: The Italian manufactured BFT brand of residential sliding gate automations are available ex stock with more than 10 models to suit all sizes and weights of residential gates. Easy to install. Includes 2 TRC2 double-channel rolling code transmitters, one pair of photocells FL130, and 1 AEL 433 Antenna with 13 ft (4mt.) cable. Electronic antisquash device. 24V dc motor. Manual emergency release - knob also available with customized key. Easy access to internal components during installation and maintenance. Optional battery back-up. QSC - Control panel includes the receiver and has the following functions: 2 or 4 step functioning logic, pedestrian access, gate open warning light, 2nd radio channel, photocell cut-out on opening, impulse block opening, automatic closing time, separate adjustment of drive torque limiter during opening and closing phases, operation time adjusted by timer. ... Read more

Features

• Electromechanical 24Vdc operator for rack sliding gates weighing up to 1100 lb (500 Kg).
• For residential use. Easy to install. 24V dc motor.
• Includes 2 TRC2 double-channel rolling code transmitters.
• Electronic antisquash device. Manual emergency release - knob also available with customized key.
• Pedestrian access. Gate open warning light.Great versatility and extreme safety.

Product Description

The ELI 250 can be used for any type of swing gate with leaves not heavier than 660 lb (300 kg) and not longer than 8.2 ft (2,5 mt) or with a length of 11.50 ft (3,50 mt) provided that the weight of the leaves does not exceed 550 lb (250 kg). For leaves longer than 8.2 ft (2,5 mt) it is recomended to install an electric lock. The ELI 250 consists of a perfectly sealed single-block reduction gear. Once the bearing case is installed, the gate can be operated even without fitting the actuator which can be inserted later. When maintenance is required, this type of case allows the actuator to be taken out without removing the gate leaf. ... Read more

Features

• Residential Swing Gate Operator: 120° opening within 32 secconds.
• For swing gates with leaves not heavier than 660 lb (300 kg) and not longer than 8.2 ft (2,5 mt).
• Or for gates with a length of 11.50 ft (3,50 mt) and leaves not heavier than 550 lb (250 kg).
• For leaves longer than 8.2 ft (2,5 mt) it is recomended to install an electric lock.
• The ELI 250 consists of a perfectly sealed single-block reduction gear.

Product Description

Pair of flat receiver-transmitter self aligning photocells to be filled externally; 24 V DC power supply, up to 82 ft (25 mt.) range. Provided with antidazzle system (10 pcs/package). ... Read more

Features

• Pair of flat receiver-transmitter self aligning photocells to be fitted externally.
• 24 V DC power supply, up to 82 ft (25 mt.) range.
• Provided with antidazzle system (10 pcs/package).

Product Description

Parameter autoset option for braking, torque and anti-squash functions. Maximum safety with anti-squash protection, thanks to a microprocessor which guarantees innovative torque control and obstacle detection. Diagnostic and statistical functions through the display. Control board preset for management by means of the UNIPRO universal programmer. Rolling code receiver with 64 codes inside the control board. ... Read more

Features

• Automation for chain driven sliding gates weighing up to 1700 lb (800 kg).
• Ideal for condominiums and commercial buildings. Maximum safety with antisquash protection.
• Maximum performance and continuous service offered by ICARO C irreversible gearmotor.
• Maximum safety with anti-squash protection.
• innovative torque control and obstacle detection

Product Description

Maximum safety, antisquash protection. Control panel preset for management by means of the UNIPRO universal programmer or built in LCD display. Integrated high security rolling code receiver. Automatically preset of working parameters. Maximum performance and continuous service offered by ICARO irreversible gearmotor. Major aesthetic innovation and greater casing sturdiness. Simple, safe manual release by means of the new ergonomic knob. Maximum safety with anti-squash protection, thanks to a microprocessor which guarantees torque control and obstacle detection. Improved accessibility and management of the control panel, having the control board fitted to the front and a display for programming. Diagnostic and statistical functions through the display. Control board preset for management by means of the UNIPRO universal programmer. Rolling code receiver and 64 codes inside the control board. Parameter autoset option for braking, torque and anti-squash functions. ... Read more

Features

• Automation for rack sliding gates weighint up to 4,400 lb (2000 kg).
• Ideal for condominiums and commercial buildings. Maximum safety with antisquash protection.
• Integrated high security rolling code receiver.
• Maximum performance and continuous service offered by ICARO irreversible gearmotor.
• Safe manual release made simple by means of the new ergonomic knob.

Product Description

JOINT: provides an indispersable automation system for swing gates installed on particulary large pillars. The drive arm with its special anti-shearing shape allows the leaves to be moved when the controller is positioned well away from their fulcrum. The emergency release mechanism is carried out by operating the release lever of each controller, located inside the hatch which is provided with a personalized key. Joint must be combined with a control unit with a torque limiter such as the Aries model control unit. The adjustable limit microswitches and capacitor are connected to the motor. ... Read more

Features

• Automation system for swing gates installed on particulary large pillars.
• Irreversible electromechanical reduction gear, keeps the gate locked in tclosed and open positions.
• Number of cycles: 100/24th (12-15 consecutive cycles).
• Maximum leaf weight: 441 lb (200 kg).
• Maximum. leaf length 8.2 ft (2.5mt).

Product Description

BFT Mitto 2 Keychain Size Two Channel Rolling Code Transmitter ... Read more

Features

• BFT Mitto 2 keychain size transmitter.
• Two channels.
• Rolling Code technology.

Product Description

PHOBOS BT: Irreversible low voltage Residential swing gate operator for up to 550lb (250kg), for gate lengths up to 6ft. Complete with eletronic torque limiter and magnetic limit switches. Designed for residential use and suitable for very restricted spaces. If the space between the gate and the fence is not enough, PHOBOS BT can be installed into a very small niche. The control board Libra includes an integrated rolling code receiver, self-diagnosis tracking and learning of statistical parameters. SPECIFICATIONS: Operator Master/Slave PHOBOS BT; Voltage 24V; Motor revolution 3800 min-1; Power absorption 40W; Current 1.5A; Pushing and pulling force 2000N (400lb); Working stroke 11in (28cm); Rod speed 0.5 in/s; Impact reaction integrate torque limiter on Libra contorl board; Limit switches magnetic (adjustable); Manual release CLS release key; Degree of protection IP 44; Controller weight 50N (11lb) - (5kg); Lubrication permanent grease. ... Read more

Features

• Irreversible low voltage swing gate operator for up to 550lb (250kg), for gate lengths up to 6ft.
• Kit Includes: Master and Slave Phobos BT swing gate openers.
• 1 Libra Control Board with an internal rolling-code receiver.
• 2 TRC 2-channel rolling-code transmitters.
• 1 pair FL130 photocells and 1 SL433 antenna.

Product Description

Irreversible low voltage Residential swing gate operator for up to 550lb (250kg), for gate lengths up to 6ft. Complete with eletronic torque limiter and magnetic limit switches. Designed for residential use and suitable for very restricted spaces. If the space between the gate and the fence is not enough, PHOBOS BT can be installed into a very small niche. The control board Libra includes an integrated rolling code receiver, self-diagnosis tracking and learning of statistical parameters. TECHNICAL SPECIFICATIONS: Voltage 24V; Motor revolution 3800 min-1; Power absorption 40W; Current 1.5A; Pushing and pulling force 2000N (400lb); Working stroke 11in (28cm); Rod speed 0.5 in/s; Impact reaction integrate torque limiter on Libra contorl board; Limit switches magnetic (adjustable); Manual release CLS release key; Degree of protection IP 44; Controller weight 50N (11lb) - (5kg); Lubrication permanent grease. ... Read more

Features

• Irreversible low voltage swing gate operator for up to 550lb (250kg), for gate lengths up to 6ft.
• Complete with eletronic torque limiter and magnetic limit switches.
• Designed for residential use and suitable for very restricted spaces.
• PHOBOS BT can be installed into a very small niche.
• The control board Libra includes an integrated rolling code receiver.

Product Description

Control panel suitable for managing one or two single-phase operators with power up to 375-375 W, provided with torque setting. 2 and 4 step logic with automatic, semi-automatic and hold-to-run operation. Programmable delay on opening and closing for 2nd motor. A series of LEDs allows easy intervention in system checking. Function setting by means of dip switches. Lock holding and ram blow. Separate inputs for opening and closing. Two-colour traffic-ligth management function by means of the SSR4 accesory (optional). Input for pedestrian opening. Separate limit switch inputs for each single motor. Universal connection for radio receiver. Removable type terminal bar to facilitate installation and any maintenance or replacement. ... Read more

Features

• Control panel suitable for managing one or two single-phase operators with power up to 375-375 W.
• Povided with torque setting, with automatic, semi-automatic and hold-to-run operation.
• Programmable delay on opening and closing for 2nd motor.
• Separate inputs for opening and closing. Input for pedestrian opening.
• Two-colour traffic-ligth management function by means of the SSR4 accesory (optional).

Product Description

The SB Batery Kit device ensures, through its batteries and battery charger, low-voltage operation of the sliding gate when there is no power supply. ... Read more

Features

• The SB Batery Kit ensures low-voltage operation of the sliding gate when there is no power supply.

Product Description

In large and in much as individual installations, it is often necessary to add or eliminate transmitters stored in the receiver memory. To simplify this operation without giving up the rolling-code safety, BFT has created the new line of receivers with algorithm coding which can be cloned. With this type of device, any standard transmitter from the rolling-code line can be programmed, so as to be automatically entered in the memory of the receiver it has been programmed for. Thanks to this function, transmitters can thus be added to an installation without needing to go to the installation site. For installations where more than one receiver is present, the receivers and transmitters can be programmed in such a way that automatic programming only takes place on the receivers required. In the case where the installation database in available, it is also possible to replace a transmitter memorized therein with a new transmitter, still without needing to go to the installation site. ... Read more

Features

• Programming of clones by addition, programming of clones by replacement.
• Programming of clones with fixed code.
• Programming of the collective receiver (excluding receivers with standard algorithm).
• Update of the memorized code lists, whenever necessary.
• See other functions under Product Description

Product Description

Use this bird net covering to protect fruits, vegetables, berries, shrubs or flowers. Protects against deer, birds and other animals. Completely reusable and convenient with mesh size of .75 in x .75 in. ... Read more

Product Description

Use this 1,666 ft reel of black 8 gauge deer fence monofilament wire at the top and bottom of your deer fence. The wire is UV stabilized to prevent breakdown from the sun and weather. Monofilament needs to be tightened with a Round Monofilament Tightner to provide the needed support for the fencing. ... Read more

Product Description

Use this 1,666 ft reel of black 8 gauge deer fence monofilament wire at the top and bottom of your deer fence. The wire is UV stabilized to prevent breakdown from the sun and weather. Monofilament needs to be tightened with a Round Monofilament Tightner to provide the needed support for the fencing. ... Read more

Product Description

Use this 666 ft reel of black 8 gauge deer fence monofilament wire at the top and bottom of your deer fence. The wire is UV stabilized to prevent breakdown from the sun and weather. Monofilament needs to be tightened with a Round Monofilament Tightner to provide the needed support for the fencing. ... Read more

Product Description

Use this 666 ft reel of black 8 gauge deer fence monofilament wire at the top and bottom of your deer fence. The wire is UV stabilized to prevent breakdown from the sun and weather. Monofilament needs to be tightened with a Round Monofilament Tightner to provide the needed support for the fencing. ... Read more

Product Description

Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. ... Read more

Features

• Type: Screw
• Pin Size: 3/8in. x 1 7/16in.
• Diameter: 7/16in.
• Working Load: 3000 Lbs.

Features

• Type: Screw
• Pin Size: 1/2in. x 1 5/16in.
• Diameter: 5/8in.
• Working Load: 6500 Lbs.

Product Description

Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. ... Read more

Features

• Type: Screw
• Pin Size: 5/16in. x 1 1/4in.
• Diameter: 3/8in.
• Working Load: 2000 Lbs.