Features

• Lock-out Mechanism - Tool will not fire unless more than three nails are in the magazine
• Anti-double fire mechanism (US patent 5597106, UK Patent 2286790)
• Dial adjustable depth control
• Easy jam clearance door (Patent pending)
• Tangle free swivel plug (Added from 2002 production)

Features

• 20-degree 16-gauge nail for finish nailing
• Manufactured out of cold worked carbon steel
• Galvanized in a "hot-dip" process which ensures that the fastener will resist rust and moisture

Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 1/2" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Features

• Multi-blow technology that virtually eliminates overdrives
• DC motor delivers 650 watts of power
• Drives 1 to 1-1/2-inch roofing nails
• Comes with two 20.4 Ni-cad batteries,one-hour charger, two canisters of 1-1/4" nails, manual, video, and case

Reviews (4)

6 Roofs per year
While I am not in the trade year round I have found this tool to be the answer to many of the challenges we face with safety and quality while on the roof.
This gun eliminates tripping hazards as there are no hoses or electric cords. This keeps the comprtessor off the roof so no hazard encountered while tring to get your equipment up to the work surface.
No overhead issue for the team on the ground because the grip pads on the top end of the gun really do stop it from sliding off the roof unlike other air guns that momentum of the hose carries the gun off the roof onto the teamn below.
Noise is much less of an issue than with compressed air. Communications from the ground up and down is easier. No noise to yell over.
I have read that you can reload the plastic containers the nails come in however I have not been able to find a manufactures note that would indicate that this is a safe practice.
Compared to the conventional Bostitch RN45B we are able to lay em down and nail em with equal speed and without fighting the hose all day.
The quality of our finished product is greater because there is no marring of the roof edge shingles from the air line rubbing against it. That is the customers line of sight and that matters.

...

If you are buying an air nail roofing gun. Reconsider and buy this battery operated gun.

Log Home Contractor
This is a fabulous tool. I use as many cordless tools as I can because I hate listening to my generator and compressor running all the time. Bostitch has made a top of the line tool with this one. The battery will lay about 2 1/2 square of shingles without a recharge and with two batteries one can be charging at all times so you never run out of power. The tool is loud but not as loud as a generator, it is a bit on the heavy side but much better than having that air hose in tow and the way it holds in your hand you barely notice the weight. You have to buy the nails in the in the plastic canisters which only cost on average two dollars more per box but if you are a real miser you can buy regular coil roof nails and reload the canisters. If you are like me and want to use cordless as much as possible and you do many roofs this is a great alternative to pneumatic. I have literally waited for years for this tool. . . thank you Stanley Bostitch.

No Hoses, No Jams, No Cords, No Overdrives, No Compressor
My construction class recently bought two of these nailers because our compressed air supply is too high pressure for nailers, so we use cordless or a seperate compressor. I have used a pneumatic nailer on five roofs ranging from small ticket booths to full sized play barns with flashing, felt paper, drip edge, and more. I was skeptical about a cordless nailer that did not use gas cells like a Paslode Impulse system, but I realized that it takes a lot less force to drive a nail through some shingles or a thin strip of aluminum than a 2x12 header. The jackhammer-style system takes some getting used to but it does not require padded gloves like a demo hammer. As for the nail cartridges, they are great. Our pneumatics constantly jammed from misshapened and bent wire-collated nails. The cartridges keep the nails in the correct shape.... This is the only roofing nailer you will ever need, just get some cartridges of nails, a couple of batteries, go up on your roof and start laying whatever is needed. This is a great innovation. If you dont believe me, try Tools of The Trade, they gave it a special award for innovation

Heavy, slow, loud and you have to buy their special nails!
I thought the basic concept of a cordless nailer was great, but this thing makes no sense.

It does not use gas cells like the Paslode. It is multi-blow, kind of like a jackhammer or a rotary hammer. It actually hits the nail a bunch of times before it drives it in unlike the paslode nailer that drives it in one motion. Seems to be really slower than an air tool. This makes it vibrate like crazy in your hand and it is wicked loud. Wear ear plugs with this thing.

It runs off of a 20.4Volt battery pack. The problem is that the battery is heavy and they dont have a drill or anything to run on the same battery. There is no way to spread your investment in expensive cordless tools. You also have to carry around another charger and battery and plug another thing in. THere is no cigarette lighter charger for the truck available either.

This thing is heaaavvvvyyy. My hitachi air roofing nailer weighs only 5-6 lbs i would guess but i think this thing is over 10 pounds. Way too heavy to be swinging around on a ladder or a steep pitch for repair jobs. The balance is a little weird to. Air tools are built to drive down into the shingle but this thing is shaped like a drill so you have a tendency to not drive the nail in straight.

The thing that really irks me is the fact that you cant use the same nail coils that you use in an air gun. You actually have to buy nails that are specifically for this tool and dont work with anything else! So that puts you at risk for them to jack up the prices on the nails once you are hooked on them. The nails also come in these little plastic individaul pouches. Im no freaky enviromentalist but i dont like wasting all that plastic and i dont like cleaning more junk off a jobsite at the end of a day.

HEAVY, LOUD, SLOW AND YOU HAVE TO BUY THIER NAILS. ALL THIS FOR ONLY ... GET ONE TODAY! ... Read more

Product Description

Model AG125 PNEUMATIC NAIL DRIVER. Drives single bulk nails from 2-15/16 - 4-7/8. Quick dial adjustment of 6 settings for precise control of nail depth. Built-in magnet ensures proper loading and alignment of nail. Built-in air filter prevents dust or foreign matter from entering the tool. Contoured handle and conforming rubber grip for operator comfort. 360 degrees exhaust system directs exhaust away from the operator. Tool hook can be installed on either side of tool. Rubber bumper protects tool housing. Specifications: 65 - 120 PSIG Operating air pressure, 2-15/16" - 4-7/8" Nail size, (L x H x W) 10-1/4" x 9-1/2" x 2-3/16" Dimensions, 2.9 lbs.Net weight, 10.1 lbs. Shipping weight ... Read more

Features

• 360-degree exhaust system
• Shoot up to 4-7/8 nail
• Depth adjustment
• Built in magnet to align the nails
• Contoured handle and rubber grip

Features

• 1-1/2 inch galvanized flooring staples
• Pack of 10,000

Features

• 20-degree 16-gauge nail for finish nailing
• Manufactured out of cold-worked carbon steel
• Galvanized in a "hot-dip" process which ensures that the fastener will resist rust and moisture

Features

• Includes a blo-gun
• Inflate and check tires
• Blow debris
• Mend and connect hose
• Quick-change template guide

Reviews (5)

Good Assortment of Accessories
This is a good place to start your air accessory collection, although I would modify it a little to make it more useful. I bought it to complement my Porter Cable 3hp compressor, which is equipped with M-style quick connects.

It has two accessories that require a male M-style coupler plugs, (the blow gun and tire chuck), but only three of this style coupler plug. If you have more than one air tool to setup, you will need additional male M-style coupler plugs (Tool Crib #727BK @$1.00). The plastic tire pressure gauge is functional, but nothing special.

The brass hose repair barbs are nice, but there are no hose clamps provided if you have to use them. I would be hesitant to put them under pressure without a band clamp holding them in place. The two female couplers and female coupler plugs will complete two 3/8" air hoses.

The blow gun is a quality, versatile unit. It comes with a rubber tip, metal tip and pin inflator for balls. The valve is easily operated and it does not leak.

With the exception of the plastic tire gauge, all the parts are high quality and useful. I could have done without the tire gauge in exchange for a few more quality parts (male coupler plugs and screw type band hose clamps). If the assortment had been a little more complete, this would rate five stars. You will also need a roll of teflon plumbers tape to seal all the threads. Now you know what else you need to finish outfitting your compressor.

Okay for Starters
I bought this kit because I live and work in a remote place where it takes an hour and a half or more to get anywhere where I can pick up little parts. For anyone living in a more convenient place, I suggest that you go round to your local hardware store or tool supplier and buy better quality parts as you need them. The pieces are okay, but they are not machined very well. For instance, the threaded components require a lot of effort to get them tight enough to stop leaks. Better machining, and good brass or bronze, would make them fit and work better. If you are just starting out, the kit is okay, but that is as far as it goes.

Should have bought something else.
Wish I bought just the stuff I needed at Home Depot. Would have saved some money. Quality was not a problem though I have no use for the tire pressure guage.

Just an average set of accessories.
This is an ok set of compressor accessories. The quality is only average. I will be replacing almost everything with better quality components. For the money, you would be better off buying individual pieces that have some weight to them. The pressure gauge is a joke and is just an example as to what the other pieces are like. Save your money and go down to your local tool supply and get quality stuff.

A great collection of accessories
This is a great collection of connectors and accessories. If you buying a compressor -- get this product also. It has just about everything you need to make fast connections, fill tires, etc. ... Read more

Features

• INCLUDES FREE BONUS: 5277NB7-1/4" Hypoid Saw
• Unique features include built-in air filter, ergonomic handle and easy load magazine.
• "Dry-fire" prevention system and a rubber bumper prolongs life of tool.
• Fires standard 2" to 3-1/2" round head stick nails
• Easy accessible nail depth adjustment to nine different depths.

Features

• 1/2 inch galvanized staples
• 10,000 per box
• For use with the US58 stapler

Reviews (2)

They work great
These staples are designed to work with your us58 Porter Cable upholstery stapler. The fact that they are galvanized means that they are designed to last a long time without rusting. I have not been able to find these locally, so the best bet is to buy them here. The 1/2" has a deeper bite, so they are ideal. I use the PC stapler for a lot of uses that are not specifically upholstery. Great all around device. Staples work great, buy them here.

Good General Purpose upholstery staple
These staples work well in the US58, feeding with no problems. These staples are good general purpose upholstery-attaching staples. Application examples include attaching fabric to pine or plywood frames. You may want to avoid using this staple in applications where you are attaching fabric to very densely grained woods or very thin plywood. ... Read more

Features

• Uses standard 18-gauge brad nails from 5/8" - 2"
• Durable and lightweight die cast housing
• Multi-directional exhaust port directs exhaust away from the operator
• Anti-dry-fire mechanism extends life of tool
• Rubber grip for comfortable handling

Reviews (1)

Great Nailer
I was looking into buying either this nailer or the porter cable one. After doing my research i found that this one had better features and also great reveiws in WOOD Magazine. All and all ive had no problems with it and would recomend it to everyone. ... Read more

Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 3/4" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Features

• Protected components for maximum durability
• 4 HP Honda GX gas engine provides proven reliability and durability
• Automatic idle control for reduced fuel consumption
• Low oil shut off provides greater engine protection
• Oil lubricated pump allows for long life

Reviews (1)

Incredible cfm for weight!
I bought this compressor for use in heavy commercial construction. It is more portable than the wheelbarrow compressors and can be put in the back of a pickup truck (unit is no feather weight though --- about 70 lbs!) This compressor has the best of all features--- reliable Honda engine, reliable Emglo compressor, overbuilt protective frame and quality gauges and quick connects make this an outstanding compressor. In commercial work, there are usually several trades on site (electrician, plumber, HVAC) and all of these guys are using the same power source. Most compressors capable of running two frame nailers draw enough power that it will constantly trip the the breaker on a temporary service pole unless run on 240 volts. With the gasoline compressor, all you have to do is make sure it has fuel and start it up! No extension cords and no more tripped breakers! We have used this compressor to run two paslode frame nailers shooting down 5/8" plywood nailed every 3" around the perimeter (120 mph rating) and this little guy could amazingly keep up! The compressor isn't louder than the DeWalt electric counterpart when running and the Honda engine means it will run for many years to come. Would not recommend this one for strictly running a finish nailer because of the overkill factor. Go buy a lighter,less expensive compressor for the finish guns. This machine is meant to turn out a much more substantial amount of air!

The only downside to this compressor is the price and its weight. That is a lot of money to shell over for a machine that does nothing more than compress air! But, then again, would you really be reading this if all you needed was an average duty Lowe's variety compressor? And if you have a pickup, leave the unit in the back and let it run. After a full day of installing sheathing, it can be a chore to load this 70lb. compressor up.

This is why I rate it 4 versus 5 stars due to the cost and weight. It seems like they could have trimmed a few more pounds off the compressor and a few more dollars!

If you have any questions, e-mail me (Azul005@aol.com) ... Read more

Reviews (1)

They Work Well
I am the proud owner of a Porter Cable MS200 stapler. I have installed several hundred sheets of roof and side sheathing using these staples exclusively. Not one mis-fire. As I build mainly custom homes, most has been 3/4 stock. The holding power of just a few staples will make a believer out of anyone.... ... Read more

Features

• Easy jam clearance
• Light weight only 4.6 lbs
• Powerful
• Anti-double fire mechanism
• Dial adjustable depth control

Amazon.com

No compressor. No hoses. No kidding. And no sacrifices in speed or power, either. There's absolutely no comparison between this performer and the fuel-cell powered competition, which we thought was a great innovation. But there's no costly fuel cell to replace on this tool—-just pop on a recharged XRP battery and get back on the job. The only difference you'll feel between this and a traditional pneumatic is that you're not tethered to an air hose. It's just as fast and fires just as powerfully into both soft and hard joints. We love that you can choose bump or sequential mode for precision or speed, something most nailers don't offer, and the integrated headlight is another impressive addition, really lighting up your workpiece even in the worst conditions. There's a fantastic six-position numbered dial to reference your depths, so you can move easily between, for example, baseboard and crown molding without struggling to reset the depth. DeWalt's covered what would have been our main safety concern: An air tool can't fire without a hose, but what's to keep this one from being accidentally fired? They've built in a contact trip lock-off. We were pleased with the troubleshooting process, too—the nosepiece is clear and very accessible, letting you clear a jammed fastener without screwdrivers or wrenches, though we couldn't get it to jam for us. Rear loading is simple and fast, and it accepts most brands of 16-gauge nails. It's built tough for the job site, but the home hobbyist would love this tool. Just hook it on your tool belt and go; it's one of the coolest tools we've seen, and the kit has everything you need: a one-hour charger, two 14.4V XRP batteries, reversible belt hook, no-mar tip, safety glasses and the heavy-duty kit box.--Kris Jensen-Van Heste ... Read more

Features

• 6 position dial allows the user to move between applications without having to re-acquire exact depth setting
• Easy access to the nosepiece for the simple removal of a jammed fastener without the use of screwdrivers or tool wrenches
• Tool works as fast as you do with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
• Headlights provide increased visibility in low-light conditions or confined areas without any light

Features

• Enclosed roll cage design and protective bars for maximum durability; dual quick disconnects for multiple nailer operation, high flow regulator for increased performance
• 2.8CFM delivered @ 90 PSI pump enables quick recovery
• Oil free pump allows for maintenance free operation, easy start up and reduced breaker tripping
• 4-Pole induction motor for quiet operation, easy start up and reduced breaker tripping
• Single handle for easy carrying against the body, ball drain allows for quick and thorough tank draining