Features

• Easy adjustable operating pressure on the machine
• Delivers 1750 psi max. pressure at a rate of 1.6 gallons per minute
• Shuts on/off at the trigger gun
• Built in GFCI for safety and thermo-coupler for motor protection
• Pressure regulation from 400psi -1750psi max and equipped with universal storage reel

Reviews (1)

Great Machine
This machine did a great job on my car, house siding and back deck. In the past, I have spent hours cleaning with just a garden hose. The Prowash cut cleaning to one fourth the time it usally had taken me. It was easy to assemble and the manual was very simple and straight forward in explaining the operation of the machine. I had purchased a Home Depot machine two years' ago and the inlet connection which was plastic keep breaking on me so I had given up on electric pressure washers completely until a friend recommend this unit. The inlet connection on the Prowash is metal so I felt my problems were over. It proved to be true. All in all-great machine. I recommend it. ... Read more

Features

• One Year Warranty/30 Day Performance Certification
• Powerful 9 amp motor
• Dual filtration system provides 99.85% filtration efficiency for fine dust pick-up
• Built-in outlet for use with power tools--vacuum starts automatically when tool is turned on
• Large wheels for easy maneuvering

Reviews (7)

Really works
Purchased vacuum for use with the PC drywall sander. The sander works great, and in combination with the vacuum, I finished drywall with the door to the room open. It's not particularly loud, and the auto-on feature (accessory plugs into vacuum, vacuum plugs into wall) when you turn on the accessory tool is great. I used it on a chop saw as well as the drywall sander for renovation of two rooms in an occupied house. The bags hold plenty and the secondary filter (like a large lawn mower air filter) keeps everything out of the air. Didn't like the cheap-ish hose, and it could use an adapter that fits std vacuum accessories. Watch power usage: add amps of vacuum and your accessory tool.

Great vac and dust collector
I have been using this vacuum for over a month now building custom cabinets in basements. I agree with most of the other comments regarding the nice features-especially the tool trigger outlet.

With the vac hooked up to my table saw, circular saw or router table, dust is held to a manageable level. No more choking on plywood dust! While the vac won't catch all the dust (don't expect to work in a finished area and not get dust anywhere in the room)it keeps the air a lot clearer. Also makes clean-up at the end of the day a breeze.

My only complaints are the lame single hook for the cord and the thin diameter of the vacuum hose--don't plan to pick up small scraps or longer nails/screws.

Best Vacuum for the money
This vacuum has picked up everything that I needed it to. Porter Cable even allows the use of bags to collect all the dust, so you don't have a mess in emptying the full vacuum. You don't need to use the bags if you have a lot of clean up. The built in pleated air filter catches all the dust, and the outside cleaning tool allows easy cleaning of the filter without opening the vacuum. The on board storage brackets for the accessories and the auto shut-off feature for water pick-up are also great. The tool power feature, is great. When used with the power outlet for tools, the vacuum only turns on when the tool is running and turns it off after 15 sec when you turn off the tool The purchase of the accessory kit will save you trouble finding attachments. The literature and manual also could be a little better. Unit has been running great for about six months in my shop almost every day. No problemsb

good and bad
1. the tool-trigger feature can really save your back from back ache and head from head ache

2. I don't mind it getting dirty because it's already black and grey!

What I didn't like:

I'd rather get a Fein vacuum because the wheels seem to give better mobilty; the same can be said of those Ridgid vacuums at HD. This PC seems to be able to move forward and backward very wheel, but not sideways. That's a really important feature, especially if you're having a bad day and you don't want to wrestle with the vacuum. The Fein also has similar features to this Porter-Cable. Lastly, this thing is a little bulky.

good quiet vacuum
I was looking for a new shop vac to replace my 15 y/o
Sears Shopvac and save my hearing. Having purchased and used several different house vacuums over the years, severe dust allergies required me to purchase a Nilfisk HEPA vacuum for house. After using this I realized how much fine dust < 1 micron leaves the exhaust in my Shopvac. My choices for vacuum were narrowed down to Fein and P-Cable. It is easy to find Fein Vacuums in local woodstores. Finding information on Porter Cable is very hard. I ended up purchasing PC based on reviews here. I liked features of Porter cable more as it was designed for drywall vacuuming. Fein required extra filters and brackets for fine dust. I still cannot find data on how fine filtration is on Porter's unit. It appears excellent as it comes.
I agree with other reviewer that accessory tools are essential
It can clean any car, boat, shop or garage mess. Unit is very quiet. I wish it had a place to wrap electrical cord when stored.
Hose appears narrow caliber and flimsy for quality of vacuum.
It wheels easily and doesn't seem to tip over easily at all.
The plastic casing is well made and very durable.
Overall I am very impressed. ... Read more

Features

• Record and playback real time data lets you diagnose during a road test for easier diagnostics
• Compatible with 96 and newer vehicles and 95 and earlier domestic vehicles (with optional cables
• Povides trouble code data telling you why the "Check Engine" light is on
• Erases trouble code turning off the check engein light
• View "Freeze Frame Data" lets yousee what conditions the code was set under for easier diagnostics

Product Description

Delivers a fine finish with low overspray. Ideal for painting or staining cabinets, trim, furniture, machinery and equipment. 58 CFM - 5 PSI. 2-Stage turbine motor. Transfer efficiency - 85%. Includes: HVLP spray gun, 25' hose. 2 Needle/nozzle sets, wrench, viscosity stick, strainers, and cleaning brush. Sprays: Light, medium, heavy-stains, varnishes, oil-based paint, latex. Weight 26 lbs.. MADE IN USA. ... Read more

Features

• Sprays most finish coatings: lacquers, clear coats, varnishes, enamels, water-borne coatings, stains and oil-based paints
• Adjustable spray gun controls to create fine finishes.
• Air flow adjusts for a finer finish
• Material flow adjusts to spray a variety of coatings
• Ideal for fine finish interior/exterior projects: cabinets, furniture, trim, fences and equipment

Reviews (1)

Solid Product, Huge Time Saver
I used this product to stain a buddy's fence and deck, finished in 4 hours what would have taken days to do with a brush or roller. Little bit of overspray but not bad, good options for adjusting spray amount and air pressure. Easy to clean up, fairly light weight, I'm already looking for more projects to use it on. 1000 times more fun than using a brush. ... Read more

Amazon.com Review

Strong suction and surprisingly quiet operation make this heavy-duty steel vacuum the ideal tool for keeping garages and workshops spick and span. Powered by a 12-amp motor, robust airflow inside the tank keeps dirt from adhering to the Airwash self-cleaning filter. Combined with Hoover’s unique E-Z Empty design, this means no messy cleanup, and no bags and filters to buy or replace. The rugged, crush-proof hose is 30 feet long, easily reaching across a garage and into cars, while the wall-mount tank stays in place.No special exhaust vents or electrical lines are needed for this vacuum, so installation is a snap: simply mount on the included storage bracket and start cleaning. The six-foot power cord is designed to stay safely plugged in, and the five-gallon tank features enough capacity to clean up the toughest mess.A set of seven attachments serves every possible cleaning need, including two extension wands, two crevice tools, a floor nozzle, upholstery nozzle for car seats, and dusting brush for dashboards and dusty workbenches. A canvas organizer hangs from the hose storage rack to keep attachments neatly stored away.--Mary Park ... Read more

Features

• 5-gallon tank and 30-foot hose; weighs 30 pounds; 3-year manufacturer warranty
• Rugged, high-capacity, bagless vacuum for workshop or garage
• Heavy-duty, all-steel construction; lifetime self-cleaning filter means no bags or filters to replace
• Powerful but quiet 12-amp motor
• Includes 7 cleaning attachments: 2 extension wands, 2 crevice tools, 1 floor nozzle, 1 upholstery nozzle, and 1 dusting brush

Amazon.com

Light, portable, versatile, and powerful, DeWalt's new little vac is a great invention. We love that it's powered by a 12- to 18-volt battery, allowing for use when the power's off or you're too far from an outlet, and that you can also plug it in for continuous use. If you're a DeWalt fan, it's likely you already have the 12- to 18-volt batteries and the charger, so the fact that this is sold without those won't affect you. But that's a change we'd like to see DeWalt make. Other than that, it couldn't be better. The five-foot hose is flexible, and the cleaning tools fit on board. The suction's impressive, whether on AC or DC power. Unlike other wet-dry vacs, you don't have to change out the filter innards when switching from wet to dry, and we just love that. Just rinse it off to clean it. Its high-efficiency filter is listed at trapping 99.7 percent of dust, and in our book, less dust in the air is a good thing. When you're wet-vacuuming, just empty the tank through the drain port. It's light as a feather, super-portable, and plenty powerful.--Kris Jensen-Van Heste ... Read more

Features

• Includes crevice tool and wide nozzle
• Runs off of 12-18V DEWALT battery packs or 120V AC
• Heavy-Duty rubber hose provides durability and flexibility
• Wet/dry filter eliminates change overs
• High efficiency filter traps 99.7% of dust

Reviews (22)

Great Vac
I found this vac very effective. You can plug it in or run it off batteries. The BATTERY AND CHARGER ARE NOT INCLUDED. If you have other DeWalt power tools no problem, if not you can buy their drill for $199 with 2 batteries and a charger, then they give you a cordless screwdriver worth $100 so you get the drill an screwdriver for free and then some. I believe this free screwdriver offer expires around Christmas 2003. I found the unit light in weight and easy to move around. The only thing might have been a longer hose.

Good first try
I like this vacuum. It does what it says it does, and does it well. But. Like all my experience with Dewalt products, they are innovative and well built, but only 90% there as cutting a few corners makes it not as good as it could easily have been. The hose is great - flexible, extendable and light. But the two nozzles don't fit on it very well, and with a bit of pressure applied sideways (easy to do when cleaning up dust) they fall off. Annoying. Just poor quality control I guess. The motor is fine on battery (I use 14.4V) but on mains (when its sucks a bit harder) it screams - ear hurtingly loud when the nozzle sucks something across the tube and no air can get in. And why no built-in charger or extension tube? So four stars because it works well, its innovative - a good idea (well done Dewalt) and there's nothing else like it. But when there is, Dewalt better make some improvements or they'll lose the market.

DeWalt DC500 Cordless/Corded Vac
I bought the DC500 vacuum a few months ago to keep in my truck. Before that, I always had a little 120v 2-gallon wet/dry shop-vac in my truck for small cleanup jobs on service calls. I was keen on the idea of having a decent small cordless wet/dry vac that can run off my Dewalt 18v batteries. Mainly because it seems that when working on smaller jobs, I always end up making little messes that are scattered all around a finished building wherever I have been drilling or cutting, sometimes in remote areas where there is no electrical outlet to be had. This little vac makes it much easier to clean up as I go instead of leaving it until the work is finished and then going back with a dustpan and brush or extension cord and my old 2-gallon shop-vac.
The suction is quite good and the DC500 also has a blower function for getting fine dust out of tight spots and crevices. It uses a single pleated filter for both wet and dry use. Dewalt says the 1-1/4-inch hose is five-feet in length, but the hose actually stretches to almost seven-feet.
I used it to clear a clogged laundry sink and it does pick up water quickly, but of course, since it is only a 2-gallon tank, it fills up fast. A fresh, fully charged 18V XR-Plus battery will last for around ten to fifteen minutes of continuous use. Since I usually only use it for a couple of minutes at a time, I get can get by for quite a while with just one battery but, if needed for extended use I can always go the traditional route an plug it into a 120v outlet with an extension cord. The DC500 doesn't come with a brush attachment, which I use often, so I bought a Shop-Vac 1-1/4 inch right angle brush for about four dollars and just leave it on the hose. That way I can carry all three attachments with the vac for any type of cleanup that comes along.
This little vac gets banged around pretty good in the back of my truck and other than the attachments sometimes falling out of their holders, it seems to be very rugged and takes the rough handling in stride. Overall, I have been quite pleased with this little vac and would recommend the DC500 as an accessory to anyone who already owns other Dewalt cordless tools and battery packs.

No Battery or Charger
Yes, it's a handy, quality built little unit. Yes it is fairly inexpensive. But....

Yes, it is misleading that they don't give you a battery or charger with a cordless vacuum. Not only that, they don't tell you that it isn't supplied.

Got what I paid for ? Maybe, but I feel misled and maybe even tricked.

JHL

Great Vacuum for small projects
I've owned this for about 2 months now and actually have used it a lot more than I thought that I would. For its size, it has good vacuum power. In fact the power is the same whether you are on the cord or the battery. Some have complained that you only get :10 minutes of use. Well, that's a lot of use. You are not supposed to vacuum the house. Typically I have it on for about 30 seconds to a minute. I think that I am getting more than 10 minutes of use by the way. It's great for cleaning up small messes and I think that it has amazing suck power.

Things that I would like to see improved:

1. Add a battery charger
2. The cord should be about 3 feet longer
3. The price is a little steep, but no one else is making this thing and they have to pay for all those NASCAR's.

All in all it's a great little tool especially if you are a handy man and want to leave your clients house clean. ... Read more

Features

• Automatic shutdown when there's overheat, low battery voltage or overload conditions
• Combines a 400 watt power inverter and a 20 amp-hour sealed battery
• 600 watt surge capability, 400 watts for 5 minutes, 320 watts continuous power output
• Two standard AC outlets, one 12-volt DC outlet
• Three digit, seven segment display for monitoring AC power draw and battery charge

Amazon.com Product Description

Mounted in a central location, Shop-Vac's clever 5-gallon Hang-Up wet/dry vacuum is the perfect no-clutter cleaning tool for garages, workshops, laundry rooms, and hobby areas. With the vac's 18-foot locking hose, you can cover a large area without the hassle of maneuvering the tank, and the unit's 4-1/2-horsepower motor delivers impressive suction and airflow of 165 cubic feet per minute. The filtering system features a high-quality cartridge filter, along with a foam sleeve for wet pickup. The vacuum also comes with a complete offering of 1-1/4-inch tools, including extension wands, crevice and gulper tools, and a 12-inch floor nozzle with squeegee insert. A handy tool-storage bracket keeps all tools organized and ready to use. ... Read more

Features

• Accessories include extension wands, crevice and gulper tools, and a 12-inch floor nozzle with squeegee insert
• Mounts to wall or post for centralized cleaning
• Powerfull 4.5-horsepower motor delivers 165 cfm of suction
• 5-gallon tank
• 18-foot extra-long hose

Reviews (5)

Good Power, Portable, But Very Loud
Been using it to vacuum up dust on a big painting job. The power is great, the long hose means I sit the canister in the middle of the room and easily reach all the spots I need. It's got good suction for when my basement floods too, although at 5 gallons it won't pump out a lake. My only complaint is that it's very loud. If I use it for more than a few minutes I wear a headset. Still, I consider it a great buy and would buy it again.

HAS NO SUCTION POWER
I bought this shop vac hoping to use it to sweep up bird seeds, cat & dog hair. It really doesn't have the suction necessary to pick up more than a few feathers! I was very disappointed and I can not get help from Amazon making a return so I must be stuck without a refund!!

Super shop-vac
What A wonderful wonderful, vacuum. WHAT POWER!!!! Every garage in America should have this. This Shop-Vac does not miss any dust. You have got to give this A try!!!!

STRONG...BUT NOISY
I mostly use this little vac on a 21/2 inch dust collection system for my table saw and miter saw. It does a real good job of removing dust and chips from the two tools. I have it hanging on a 10x10 post to one side of my small shop and can vacuum the whole shop floor with the 18 foot vac hose that came with the machine. It has a good selection of tools and filter replacement is fast and easy. However, it is noisy. It actually drowns out the sound of my table saw. The 4" Delta dust collector I use for my planer and jointer is actually quieter than this little vac. I will continue to use it (maybe build a sound box for it), because it does do a great job. Except for the noise level, I would reccommend it to anyone.

shop-vac hangup 4.5 hp
I bought 3 of these units for Christmas presents, including myself. The product was so new that the store personnel had no feedback, so I took a chance. We love it ! The portability is fantastic. My son has his hanging on the wall in his workshop and takes it off the convenient wall holder to use in other areas. I haven't bothered to attach my holder, as I carry it all over the house, garage and Suburban. The long hose and cord make it much easier to use than a normal shop-vac which I also own. The regular shop-vacs are a pain to pull after you, while this unit enables you to cover alot of area before you have to move it The suction is strong. It has a slim shape so fits into tight areas or stores easily. Changing a filter takes about 30 seconds. It is beautifully designed to carry about. I will buy more of these in the future. ... Read more

Features

• No Tools needed for assembly.
• Ergonomic handle with easy length adjustment
• Large translucent collection bin that holds 6 gallons and is easy to empty.
• 21 inch wide heavy duty brushes that can be adjusted.
• Swivel caster wheels for easy manuverability.

Features

• One year warranty, one year service contract, 30 day no-risk trial
• Electronic module provides full power, even under load, from 0-1,000/0-3,000 rpm, 5/8- to 11-inch Spindle thread
• Conveniently located variable-speed dial lets you adjust speed for different materials and applications
• Heat-treated, precision-cut gears for smooth operation
• External brush caps for easy servicing, tool weight: 8.25 lbs

Reviews (5)

Detailer
This is the original Black and Decker Buffmaster. I bought mine in 1992 and it still works great.

foam & wool pads
To the person who has problems with , and refered to tie pads.
Any major paint wholesaler can sell you a kit that will replace
the pad with a velcro based plate to which you can place a foam
or wood pad with a touch and all work great.

DW849 works for me !
I bought this polisher to compound and wax a boat and I was extremely pleased with the results. The variable speed dial with a maximum RPM of 3000 was definitely the ticket on the parts of the boat that were suffering from severe oxidation.

I found myself running at about 1800-2000 RPM's over most of the boat but having the extra power when needed was definitely a time saver.

The only drawback I could mention is that this tool is not friendly about accepting generic polishing and cutting pads produced by "other" manufacturers. The Dewalt mounting bolt for the flex backplate leaves few options other than to use DeWalt pads unless you want to use the drawstring type, and I have been unable to find any drawstring pads worth purchasing.

Bad gearing,and more.
I have had my polisher less than one year.I have had the spindle replaced twice do to abnormal gear sounds, and viberations.And just today the electronic module well R.I.P. I will say this at first i loved it and now i hate it.By Andy.K A long tine detailer.

DeWalt Polisher
This is the best polisher/buffer i have ever used. I own a detailing company and this is the only high speed buffer we use. Very well built. We have one that is over 4 years old, and still works like it is brand new. The variable speeds make this buffer great for beginning polishers and expert detailers. A must buy. ... Read more

Features

• 115/230v
• Built rugged for demanding work loads
• 3/4 inch hp 1800 RPM buffer offers the ultimate in buffer flexibility
• Excellent for polishing and buffing metal, aluminum, brass, and copper
• Single phase

Reviews (2)

Fine machinary.
Humming along under heavy use for a couple years now. Smooth, quiet, powerful, and a heck of a deal.

UNBELIEVABLY Smooth!
I received this buffer as a gift. I cannot express to anyone who hasn't seen this machine running the smoothness of this unit. It is so unbelievably quiet and vibration-free. The quality sticks out all over it. The shafts are heavy and smooth. The unit is heavy-duty, well-finished, and powerful.

This is typical Baldor quality, and if you've ever had any experience with Baldor motors or grinders, that says all you need to know. These units are US-built (Fort Smith, Arkansas). That's real important down the road (in case you ever need service or parts). But... the way this machine runs... I don't anticipate needing either service or parts!

The 1800 rpm is nice. The edge of an 8" buffing wheel travelling at 1800 rpm is really zipping by. I'd be uncomfortable with the 3400 rpm model (because I'd be afraid it'd heat the buffing compound too much). Once you see this machine running, you'll know what I mean.

This is a machine you could use day-in, day-out, and still get a lifetime's worth of use from it. Unbelievably fine quality! ... Read more

Features

• Cartridge and collection filter
• 5.0 HP quiet motor
• 16 gallon plastic tank
• Deluxe 2.5" plastic tools
• On-board tool storage

Reviews (5)

Keep the cat away from this vac
This Wet/Dry Vac is the best shop vac I have ever owned. Make sure you are waching what your picking up with it. Everything goes in but does not come out. 5.0 horse power will pull the paint off the neighbors house. Great unit, get one you will love it.

No blower
The Shopvac works great, but does not convert to a blower.

Easy to use and it definitely gets the job done.
First, let me point out that I'm not a contractor. I'm a homeowner with a big, dirty garage and the owner of 2 frequently dirty cars. I needed something that could handle seriously dirty floors, walls, spills, car floors and anything else I could throw at it outside of the house. And, I needed to be able to do it fast and easily.

In short, this machine fit the bill perfectly. I don't have any complaints about it. It came w/ a huge vacuum bag, hose, accessories and it was easy to assemble. It has amazing sucking power and is very easy to move around. It's probably more machine than I need for my purposes, but I'm not complaining at all.

To sum up: It's an extremely nice machine for a very nice price. I seriously doubt you'd be disappointed.

Great Wet/Dry Vacuum, especially Wet!
I have been infinitely pleased with this unit. It is well made, surprisingly quiet, extremely powerful, and a great value for the price. Our basement just flooded (too much rain & snow). This unit can pick up about 10+ gallons of water in about 30+ seconds ... from standing water only about 1/4" to 1/2" deep. Although having your basement flood is not fun, having this wet/dry vac almost made the experience tolerable. Almost.

Regarding the dry stuff ... sucking up saw dust in the shop is a trivial job for this baby. I always feel good about having purchased a well-engineered tool. And this vac definitely makes me smile.

Pro's: Well Made, Powerful, Quiet, Good Value, Good Hoses

Con's: The utility bucket doesn't fit the accessories

Shop Vac reliability and Power... A+++
ShopVac wrote the book on wet/dry vacuums. This little beauty is no exception. I received one as a gift... I liked it so much I purchased another.... I'll keep this one at camp. The power and unusually quiet motor make an effective tool for cleaning up a wet or dry mess. I recommend it! ... Read more

Product Description

The standard 12-volt PowerLuber grease gun is powerful, generating up to 6000 psi of operating pressure. The battery recharges in only one hour and lasts long enough to dispense as much as 3 tubes of grease. It's perfect for hard to reach fittings. It relieves worker fatigue and speeds up routine lubrication tasks. Load the PowerLuber with a filler pump, by suction or use a grease cartridge. The PowerLuber 1242 comes complete with a heavy-duty carrying case, 30" whip hose and battery charger. Options include adding a second battery for continuous operation all day and Guardian grease cartridges that can be stored in the case. Models are available with chargers designed for use in many international electrical outlets. Kit includes an additional battery for increased productivity. Grease cartridges NOT included! Sold separately. Availability: In stock. Usually ships within 24 hours. Ships via UPS. Now available with $25 gift card to to Bass Pro, Blockbuster Video or Best Buy. Offer good until 12-31-04 ... Read more

Features

• 6,500 PSI
• 3 to 6 tubes of grease per charge
• 30" Hose
• Comes with 2 batteries, charger and case
• $25 Gift card to Bass Pro, Blockbuster Video, or Best Buy until 12-31-04

Features

• 4 piece detailing kit
• 4.0 peak horsepower
• All steel construciton
• Vacuum/blower capabilities
• Complete set of accessories

Product Description

With the Porter-Cable 7336SP polisher, fears of polishing are a thing of the past. Unlike circular buffers and lesser-quality random-orbital polishers, the 7336SP is easy to use and safe on your paint- even for the amateur. This is a dual-action polisher: it oscillates in a random, orbital fashion, preventing excessive heat buildup. This polisher will not burn your paint. The 3.7 amp motor includes a variable speed mechanism which allows you to control the speed between 2,500 OPM and 6,000 OPM. An important component of this tool, which separates Porter-Cable from most of its competition, is the removable counterweight. The counterweight is located in the rotating shaft and maintains balance while you polish. Unlike the Porter-Cable 7424 polisher, the 7336SP comes with a specially-balanced counterweight which is required as you switch to denser/larger non-OEM pads. The flexibility of the 7336SP allows for a variety of pads up to 6 ½ inches. It comes with a white polishing pad that works well at minor oxidation, swirls and light scratches. While excellent at polishing, this pad is also soft enough to be used for finishing and glazing. This tool is so easy and safe you will regret not having added it to your detailing supply box sooner. Finally, a polisher you don¿t have to fear! Please note: This unit does not include a hook and loop backing plate. ... Read more

Features

• Dual-action, Random-orbital movement
• Electronic variable speed (2,500-9,000 OPM)
• 3.7 amp motor
• Includes a 6.5" white polishing pad, a sanding plate & a wrench
• Easy & effective for both the amatuer and the expert!

Amazon.com Review

Park-Zone is an innovative precision-parking device for the home that's easy to use and even easier to install. After a simple one-time setup, the Park-Zone uses its ultrasonic sensing mechanism to measure the distance from your car to the garage wall as you park. When you pull into the garage, you see the green light illuminate, then midway it changes to yellow, and when the light turns red you're right where you want to be. In our book, this beats a tennis ball hanging on a string because it's a lot easier to set up, it's much more precise, and, unlike the tennis ball, it looks good in a garage. Anyone who parks in a small or crowded garage will appreciate the accuracy this gadget offers. The Park-Zone operates on AC power or on batteries that last an entire year. Stop bumping the back wall and get into the Park-Zone. --Brian Trinen ... Read more

Features

• Requires 4 AA batteries (not included)
• Superior Ultrasonic technology
• Wide-range sensing, 0.5- to 16-feet
• Auto on/off
• Operates on AC or battery power

Reviews (27)

Very Useful Device For Safe Garage Parking
I ordered this item, it was delivered very promptly by Amazom.com. It was easy to install, but took longer than 90 seconds, as indicated by the manufacturer. Park-Zone can be installed in any garage, and simply guides you to the exact distance from the wall that you determine. It operates on 4-AA batteries (which are said to power the unit for a year) or the AC adapter included. As you drive into the garage, a green, amber, and red light guides you to the right spot. I'll be ordering 2 more for our other cars !!

It Does Exactly What It's Supposed to Do...

I was skeptical when I first purchased this item because I didn't have any confidence in it's ability to accurately gauge the distance of a bumper to the bumpee (a.k.a. the wall). But, after installing it my confidence was immediately buoyed by the unerring accuracy with which it issues its green-yellow-red sequence.

The setup and installation took about 10 minutes. Anyone can install this thing! The instructions were clear and easy to follow, and the provided templates make sure your installation goes easier.

The ONLY complaint I have about this device is the number of wires it leaves exposed. Depending on the distance from an AC outlet, it can be aesthetically unpleasant. There's a wire from the signal light down to the sensor (the wire that's shown in the photo), and then another from the signal light to the AC outlet.

Overall, though, I love the device. And... it works with multiple cars and doesn't seem very sensitive to bumper height.

5 Stars!

park zone car parker
the park zone is a good product but the one that i ordered said i could park my vehicle up to 0.5ft. from the wall the ones that i recieved will only let me get as close as 1.3ft. that is not close enough for me to get it in the garage. i had the old units but i had to replace the batteries about once a month on one of them so i wanted to replace it with one with the ac power outlet i had the model no pzx-9901 i have one more of those and it works great .the new units i have are pz-1500 .
i just tried anothewr way i moved the sensor up to 4ft now i can park as close as i want the sensor hits the winshild now it works perfect.

Parking on a dime
I purchased two units a year ago. One for each of my garage doors. Love 'em both. Have no problems. Work as advertised. Takes the risk out of guessng when to stop my car. And I could take down the stupid tennis ball I have been using for years. Another plus is my wife likes the blinking colors. Go figure. Extreme change in seasonal tempature does not adversly effect the opeation of the units. Still just keep on working.

Don't Do it!
I am very disapointed in mine.
I was expecting it to be very accurate, but it doesn't work if you try to park closer than a foot from the wall.
I have a large vehicle, and I need to get within 6 inches of my wall. This device WILL NOT work with that close of a range.
Also I have been having to reset it alot (maybe because I am pulling up too close.)

I think I'll just keep pulling up until I hear it crunch! ... Read more

Features

• Accessories include: AC charger, DC charging cables, Jump start cables
• 300 watt portable, rechargeable, electronic generator
• Vehicle jump starter
• 250 psi air compressor built in
• Three prong AC outlet

Reviews (8)

First Rate
Loosing the power cord on the air compressor is worth the purchase price. If you ever had to fill tires on a trailer you know what I am talking about.

Invertor works well, but keep in mind 300Watts of battery power is a small bucket of power, don't try any inductive loads. I managed to burn out the invertor. Xantrax honored the warantee and replace the unit no questions asked. Refreshing change after dealing with Sony's warantee department!

Highly recommended

instant AC power
If your power goes out you can live, for a while, with no lights. The operation of a sump pump is a different matter. Last year I spent 5 hours bailing a sump pump hole with a plastic pitcher. Not enjoyable. I went everywhere looking for this type of unit and spent an hour on the internet. The Xantrex 852-1840 generator seems to be a great insurance policy.

Good overall; takes a long time to charge
Overall, I am pleased with this product. However, I ran into the same issues addressed by Ron Campbell in his review. Although the manual states it takes about 40 hours to recharge using the AC adapter (plus an additional 15 hours if you don't see the green light after 40 hours), it took more like 72 hours before I got the green light indicating full charge. The owner's manual states that longer charge times are indicative of less than 120 volts at the wall outlet. I find it hard to believe that my three-year-old house does not have 120 volts at the outlets, but I guess that is possible.

I bought this to use as an emergency jump-start unit and to add air to my tires after they are deflated for offroad travel. It seems to suit my needs. I would recommend this product, but be aware that the charge times may take twice as long as those stated by the manufacturer.

Very Useful
I have found it to hold a charge very well. It is great to have a back-up when rv camping. It is also reassuring to know that when camping in remote areas that you have an emergency if your vehicle doesn't start. I consider this a good buy.

Best invention since sliced bread!
I have sleep apnea and need a machine to help me breath when I sleep. During power failures, I have had to stay up until the power came back on until I received this machine as a birthday gift. It will run my CPAP machine for more than 8 hours! ... Read more

Amazon.com

The engine light comes on. Why? Actron’s AutoScanner can tell you by retrieving trouble codes from your vehicle’s computer. The scanner is compatible with all cars and light trucks sold in the United States from 1996 through now. A large, easy-to-read liquid crystal display shows the trouble code and its definition, clearing the code and turning off the trouble light at the same time. The attached diagnostic cable provides both data and power connections. The menu-driven interface combined with "hot keys" for read and erase functions make this tool very easy to use.--Kris Jensen-Van Heste ... Read more

Features

• Code description displayed on large LCD screen
• Compatible with 1996 and newer vehicles
• Provides trouble code data telling you why the "Check Engine" light is on
• Erases trouble code turning off the "Check Engine" light
• Vie I/M Monitor status

Reviews (4)

Almost mandatory for modern vehicles!
The engine in my 2000 Ford F-150 Supercab started dying frequently, the dreaded "check engine" light came on and I did not want to take another $$$ trip to the dealers service department. So I do a little research on OBD and bought an Actron CP9135 OBDII AutoScanner at an excellent price. Plug it in, retrieve the "P1507" code, which translates to "Idle Air Control System Underspeed Error (Ford)". I check the IAC sensor and discover it's not plugged in right. I fix this connection and the problem disappears! If you have a modern (post 1996) vehicle and you do a little of you own auto work (turn a wrench now and then) you need this OBD box. Actron makes an excellent product at a very good price. (If you have an check engine light on - you need a OBD box!)

Has saved me big bucks!!
I bought this because my wife's car is always running its check engine light and I never know what's wrong. Every time I brought it to her dealer it cost me as much as this tool. I wish I had this thing two years ago, I would have saved myself 200 bucks.

Excellent function and quality, price a little high
I bought this becasue my Ford constantly pops it's Check Engine light. Considering the visit to the dealer is around 3/4 of a bill each time, I figured this would equal two trips to the dealer.

It does a nice job of reading the codes and resetting. It also does a nice job of monitoring the sensors. What it will not tell you is exactly how to fix your problem in many cases. I am an ex-service manager (from the pre-techno era) and reasonably accomplished mechanic. Even I have to do research after collecting the code. Determine WHY you have a particular sensor reading. Different things can trip the same sensor.

This is a well built tool to help you in your diagnosis. It is not the automatic answer machine some people may assume it to be.

I think this tool should sell for under a bill. That detracts one star.

nice little scanner
good scanner but does not retrieve codes for Brake (ABS) or Air Bag (SIR) systems. ... Read more

Product Description

Only available 2-Way Remotes with 66-bit Code-Hopping! * Includes a Belt Clip * Vehicle Recovery System * Turbo timer and defroster activation output built-in. * Parking light flash * Dedicated 1 button start * +/- Doorlock Polarity Outputs * One 4-button LCD Remote * 5 channels * 5 zones * Flashing L.E.D. light * Valet switch * Starter Disable built-in * 6 Tone Revenger Siren * Remote Panic/Car Finder * $2,500 Guaranteed Protection Plan * Viper quality, with Limited Lifetime Warranty! * Super High Frequency (SHF): The best range in the industry! * XCRS-4 relay/extreme capacity relay satellite. * Automatic configuration of transmitter buttons. * All models are Clone-Safe. * Diesel mode now with dedicated glow plug input. * Complete engine monitoring: Off, voltage, or tach * Longer run time: 12, 24 or 60 minutes programmable. (0-60 minutes with the Bitwriter) * Dedicated factory security control wires. * Viper GPS Tracking System: through ESP 2 serial port ... Read more

Features

• User-friendly 2-Way Remote with the Ultimate 2-Way Security and Remote Start system!
• Responder Technology: Unique LCD Interface for 2-Way communication of command confirmations and trigger events!
• Confirms all commands with easy-to-understand icons, plus text!
• Alerts users to security system triggers by Beeping or Vibrating!
• Responder alerts you when too far away to hear it.

Features

• Assembled dimensions: 79" high x 26" wide x 19" deep (from wall)
• Bikes not included
• No bolts, screws or fasteners required
• Independent adjustment arms for level bike storage
• Vinyl-coated bike cradles and base protect bikes and floor

Reviews (11)

Arrive unfunctional
This rack seems like it'd be a good idea. I bought it to free up some space inside my apartment. However, when I received the rack, I was unable to fit the pieces together.

I called the customer support people at Racor and they were very friendly. They are going to ship out a new piece for the middle which should fit.

If this works, it'll be a nice rack. Mine's not scraped up like the other reviews. However, I have yet to see if this will work.

Only holds one bike, doesn't stand up straight.
1. The packaging was poor and the base was badly scratched when I received it.

2. I'm 6'2" and I have two tall bikes. The rack is too short for both of them. With the top bracket at the highest setting, the bottom bike won't fit below it. I paid a welder $30 to change the angle of the top bracket so that it goes up 45 degrees. Now there is room for the second bike. Now the rack costs $80.

3. The joints in the rack are wobbly, so my rack tilts to the right about 5 degrees. I think it's ugly. I'm going to screw the top of the rack into the wall to fix this. That kinda defeats the purpose of a "gravity" rack.

Now that I've got it fixed up, it does what it's supposed to. Kind of a pain but it works, and it's still pretty cheap at $80.

It works and it's a deal
like other reviewers my box arrived a bit beat up, i was half expecting to find parts missing. unlike others i had no problem assembling it and it seems very sturdy. for the price you aren't going to find a better deal.

i've got way too many bikes in too small of an apartment. the lower half seems a bit useless (all my bikes are pretty big though). it's not tall enough to get the bottom bike off the floor so you can't store anything there. i'm thinking about removing the lower arms and just leaning a couple of bikes there. it's already getting my apartment into shape.

Just what I wanted!
I've been wanting a bike rack like this for years. I've tried products that seemed similar, and they just didn't work for me. This one's exactly what I was looking for.

APPEARANCE
The rack arrived with no scratches. This was a surprise, given that two of the sections that make up the vertical post were loose in the manufacturer's box, and the box was a bit battered.

The rack itself looks great in my garage.

STABILITY
When positioned against (or near) a wall, the rack sways mildly when a bike is removed or replaced. The base is big enough and the overall design is such that removing the bottom bike (gently) doesn't seem to cause the whole thing to fall over--as long as the wall is there for backup. The manufacturer recommends anchoring the rack to the wall and includes hardware for this purpose.

ASSEMBLY
The central post is delivered in three sections: The base is the curved "T" that you can see in the picture on the Amazon site. The other two sections form the vertical tube.

These main sections fit very tightly together. As far as I'm concerned, this makes the whole thing more internally stable. To assemble the central post, I relied on a many squirts from my trusty can of WD-40, some wiggling, gravity, and patience. Without all that, I would've been stuck (and the sections would've been too).

The four arms that hold the two bikes attach into slots on either side of the vertical tube. I used a small block of wood to knock the arms in and out of the slots (I don't have a mallet, and it seemed like a hammer would dent/scratch the finish). Each bike is held by resting the top tube in cradles (at the end of each arm). The cradles easily rotate as needed to adapt to the angle of the top tube. Nice touch.

It definitely took some effort to put this rack together. However, I'm pleased with the results so far. It really frees up space! Taking it apart will be an interesting challenge some day.

Is it worth the price? Well... Even with the Amazon price, it seems a bit more expensive than other garage-quality bike racks. However, over the years I've spent more in total on other racks that didn't work out for me at all. This one is just what I wanted!

worst purchase ever
The pieces would not fit together, after hours of trying lube, force and then the hammer, nothing worked. One of the tubes finally split and now there is no hope of making it work. It seemed like a good idea, but I was just taken for $60.00.

Don't buy this product ... Read more