Features

• Quickchange gearbox
• MT-2 tailstock taper
• 1-1/2-inch x 8-thread-per-inch spindle
• One year warranty

Features

• Includes #2 Morse Taper Spur Center
• 1/2 HP, 5 speed 500-3200 RPM
• Cast Iron Construction - weighs 78 lbs
• Includes 3" Faceplate, Live Tailstock Center
• Includes 6" toolrest & spare drive belt

Product Description

There's never been a better time to get into metalworking--or a better price on a professional-quality Grizzly metalworking lathe. The Model G4000 is precision crafted by one of our most trusted factories for superior accuracy and long-lasting dependability. You won't find a better combination of price and performance on a full-featured 9" x 19" lathe anywhere! ... Read more

Features

• Distance between centers: 19"
• Motor: 3/4 HP, 110V
• Range of speeds: 130, 300, 400, 600, 1000, 2000 RPM
• Spindle bore: 3/4"
• Swing over bed: 9"

Features

• Variable speed from 750 to 3200 rpm
• Powerful 2/5 HP Motor quickly removes material
• Variable speed control with current feedback maintains constant speed under load
• Cast iron bed and headstock for stability and extreme durability
• Lock-off switch with removable key

Features

• Live Center
• Three piece chisel set
• Safety goggles
• Knock-out tool
• Tool rest

Reviews (2)

Great little lathe but limited manual
I am very pleased with the quality of the Mini Pen Lathe by Jet and other than the obvious limitations of a machine that is a small version of the larger ones, it performs well. I am disappointed that the paperwork with the lathe does not include information to order replacement or accessory parts. Also, it is listed as a two-speed lathe but the manual does not describe how to achieve those two speeds. It appears to operate on the higher of the two RPMs. If you have any interest in future lathe work that might require a slightly larger lathe, you should consider it at this time. Upgrading can get expensive, as I have found out.

Excellent Value
This pen lathe is the perfect tool if all you want to do is make pens and maybe a small box. you cannot turn anything larger than about 2" diameter but that's not the point of this little marvel.
Setup is trivial but the integrated wrenches for adjusting the toolrest and stop are clumsy to use. A wing nut would be better! (OK, kidding a little). Changing speed is a belt change that is easy to do but there is no hand wheel for manually turning the mandrel. This is a problem during finishing and sanding but is minor since you can turn it at the housing due to it's small size and inertia.

Don't but this lathe for the crummy tools in the box, however. Get a "real" set of chisels with this. What do you expect, though, when you can get these as low as $99 at times (on sale)?

You will need to clamp this down (and it has mounting holes if you prefer) but I use two 3" spring clamps and that's all the holding power it needs. ... Read more

Product Description

With its solid state speed control and exceptionally smooth and powerful motor, we know this will soon be a "favorite" in your shop. Small enough to fit on a bench top, yet packed with features for your big "little" jobs. And with the variable speed capability, you will always be at just the right RPM for the task. ... Read more

Features

• 1/3 H.P. motor
• 20" between centers
• 6-1/4" swing over bed
• Shipping weight approx. 40 lbs.
• Variable spindle speed 0 - 3025 R.P.M.

Product Description

Need a larger combo machine? One with an awesome 31" between centers and 16 1/2" swing? Then the G9729 is the answer. With great features like magnetic controller and forward/reverse switch, hardened and ground bedways, two motors for extra power and a 4-way turret tool post makes this a real do-it-all machine. Cuts inch and metric threads with ease and includes a built-in milling table with T-slots, a steady rest and a follow rest. Convenient window allows easy verification of drill spindle speeds. An incredible machine at an unbeatable price! ... Read more

Features

• Distance between centers: 31"
• Lathe speed range: 175-1425 RPM
• Mill/drill speed range: 135-1500 RPM
• Swing over bed: 16-1/2"

Product Description

Precision, versatility and high quality in a small package are what you get with our new G0516 Lathe Mill Combo. The 6 speed lathe includes big machine features like a 4-way turret tool post, cuts both metric and inch threads, see-through eye shield, 3/4 HP motor and a 9 3/4" swing. The milling head features its own 1/2 HP variable speed motor, tilting column, MT#3 spindle taper and 8" of vertical travel. It bolts onto the back of the bed and is sturdy and versatile. This is an exceptional value and will make a great addition to any shop. ... Read more

Features

• Distance between centers: 21"
• Lathe motor size (Single-phase, 110V): 3/4 HP
• Lathe spindle bore: 3/4"
• Mill/drill motor size (Single-phase, 110V): 1/2 HP
• Swing: 9-3/4" (lathe), 12 3/4" (mill/drill)

Product Description

New and improved! We took our basic combination Metal Lathe/Milling Machine and increased its capacity and usability. Start with a lathe spindle bore of 3/4" and a longer bed. Then add more change gears, 4" 3-jaw chuck, reversing switch and so much more. This is an excellent machine for anyone, from the beginning machinist to the seasoned machinist. You get a lot of machine in a very small package with the features you need for just about any job! ... Read more

Features

• 4" 3-jaw chuck
• Cuts inch and metric threads
• Distance between centers: 19.2"
• Motor size (single phase 110V): 3/4 H.P.
• Swing over bed: 16-1/2"

Reviews (1)

LET HARRY DO IT.
Just starting up for retirement, alway did maintainace, and
they woulnot let me in machineshop to see how they did it.
so at 53 yr."ima" learning. This little lathe combo is nice.
ONLY PROBLEM IS A HARD SPOT DURING CHUCK TIGHTING AND LOOSING, AND HOPEFULLY , IT WILL CLEAR UP WITH USE. MY SON OF 11 YEARS OF AGE , JUST FINISHED MAKING OUR OWN LATHE GRINDER ,
LIVE CENTER , AND NOW WORKING ON OUR OWN TAPER ATACHMENT.
OH, YEA, IMA TRYING TO LEARN TO TYPE TOO. ... Read more

Product Description

This Hobby Lathe is the perfect set up for anyone with an electric drill. Includes sanding disc and table. ... Read more

Features

• 24" between centers
• 360° head swivel
• 6" swing over bed
• Aluminum alloy bed construction

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum adjustable zero handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars, 48-page color instruction manual. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. A Package includes 3.1 3-jaw chuck and 3/8 Jacobs tailstock drill chuck. Save money compared to adding chucks separately. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Includes additional accessories and 48-page manual
• One year warranty
• Handwheels calibrated in .001" increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum adjustable zero handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars, 48-page color instruction manual. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. A Package includes 3.1 3-jaw chuck and 3/8 Jacobs tailstock drill chuck. Save money compared to adding chucks separately. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Includes additional accessories and 48-page manual
• One year warranty
• Handwheels calibrated in .01mm increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000.Made in USA. B Package adds 3.1 3-jaw chuck and 3/8 Jacobs tailstock drill chuck. Also includes steady rest, live center, cutoff tool/holder HSS cutting tool set, 5/32" T-driver, Hex T-driver, center drill set, Sherline Accessories Shop Guide book. Also includes steady rest, live center, cut-off tool and holder, 3 pc. HSS cutting tool set, hex t-driver, center drill set and Sherline Accessories Shop Guide book. Save $75.00 compared to buying all accessories separately. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Includes additional accessories and 48-page manual
• One year warranty
• Handwheels calibrated in .001" increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000.Made in USA. B Package adds 3.1 3-jaw chuck and 3/8 Jacobs tailstock drill chuck. Also includes steady rest, live center, cutoff tool/holder HSS cutting tool set, 5/32" T-driver, Hex T-driver, center drill set, Sherline Accessories Shop Guide book. Also includes steady rest, live center, cut-off tool and holder, 3 pc. HSS cutting tool set, hex t-driver, center drill set and Sherline Accessories Shop Guide book. Save $75.00 compared to buying all accessories separately. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Includes additional accessories and 48-page manual
• One year warranty
• Handwheels calibrated in .01mm increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000.Made in USA. B Package adds 3.1 3-jaw chuck and 3/8 Jacobs tailstock drill chuck. Also includes steady rest, live center, cutoff tool and holder, HSS cutting tool set, 5/32" T-driver, Hex T-driver, center drill set, Sherline Accessories Shop Guide book. Also includes steady rest, live center, cut-off tool and holder, 3 pc. HSS cutting tool set, hex t-driver, center drill set, compound slide, thread cutting attachment and Sherline Accessories Shop Guide book. Save $85.00 compared to buying all accessories separately. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Includes additional accessories and 48-page manual
• One year warranty
• Handwheels calibrated in .001" increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000.Made in USA. B Package adds 3.1 3-jaw chuck and 3/8 Jacobs tailstock drill chuck. Also includes steady rest, live center, cutoff tool and holder, HSS cutting tool set, 5/32" T-driver, Hex T-driver, center drill set, Sherline Accessories Shop Guide book. Also includes steady rest, live center, cut-off tool and holder, 3 pc. HSS cutting tool set, hex t-driver, center drill set, compound slide, thread cutting attachment and Sherline Accessories Shop Guide book. Save $85.00 compared to buying all accessories separately. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Includes additional accessories and 48-page manual
• One year warranty
• Handwheels calibrated in .01mm increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum adjustable zero handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars, 48-page color instruction manual. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Rocker tool post adjusts tool tip height without shims
• One year warranty
• Handwheels calibrated in .001" increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum adjustable zero handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars, 48-page color instruction manual. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Rocker tool post adjusts tool tip height without shims
• One year warranty
• Handwheels calibrated in .01mm increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. A Package includes 2.5 3-jaw chuck and ¼ Jacobs tailstock drill chuck. Save money compared to adding chucks separately. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 8 between centers
• Includes 2.5" 3-Jaw and Jacobs drill chucks
• 48-page color instruction manual
• One year warranty
• Handwheels calibrated in .001" increments

Product Description

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. A Package includes 2.5 3-jaw chuck and ¼ Jacobs tailstock drill chuck. Save money compared to adding chucks separately. ... Read more

Features

• Size: Turns 3.5 diameter parts over the bed, 8 between centers
• Includes 2.5" 3-Jaw and Jacobs drill chucks
• 48-page color instruction manual
• One year warranty
• Handwheels calibrated in .01mm increments