Features

• 2-inch finish brad nails
• 18 gauge
• 5,000 per pack

Reviews (3)

Smooth as Silk!
Just finished the casing on the closet door frames in my daughters' room. These were flawless in my Accuset 200BN.
Never a jam with the 2" brads or the 1 1/4" brads!

Average Performance Brads
These are functional, but not very tough. They seem to be a little softer than some other brads I have used, which lets them deflect fairly easily at this long length. Therefore, keep your fingers out of range! They do hold well and are difficult to remove if you make a boo-boo.

Nailed again
I am a finish contractor and I really find it nice when i can buy a quality product that will not damage either my tools or the project that I am working on. These nails feed thru my accuset brad nailer w/o any trouble at all and plan to switch over to them fulltime. ... Read more

Features

• 1-inch finish brad nails
• 18 gauge
• 5,000 per pack

Reviews (2)

Shiny, Sharp and Cheap
Wow! Age of wonders this is a fantastic product.

Itty, Bitty Brads for Your Power Nailer
These are fairly soft as brads go, but at this length, deflection is not a major problem. You do still have to be careful, though. These are fine for smaller chores, like fastening thin shelves in dadoes or applying trim moldings. They hold well, but are tough to remove if you misfire. ... Read more

Features

• 1-1/2-inch finish brad nails
• 18 gauge
• 5,000 per pack
• For use with Hitachi, Senco, Porter Cable, Airy, Bostitch and Accuset nail guns

Reviews (3)

Work well for me.....
I have used these nails extensively in my Bostich BT-50 (on my 3rd box of 5000) with no problem at all. Possibly other manufacturers have lower tolerances or are not up to par with the Bostich, but the nails work just great.....

Useful Size, But a Little Too Flexible
This is about the most common brad size I use in my shop. These are fairly soft, so deflection can be a problem if you are not careful about the material you are nailing. Avoid knots and obtuse angles on plywood. They hold well and can be difficult to remove once driven.

Poor Quality Nails for the Porter-Cable Finish Nailer
These nails are not of the quality necessary for the Porter-Cable Finish Nailer that they are typically advertised with (FN250A). They sometimes came out 2 at a time, not at all, or caused the nailer to jam. I called Porter-Cable, and acquired their nails, and the problems went away. I would not recommend these nails, especially for this nailer. ... Read more

Features

• 1-1/4-inch finish brad nails
• 18 gauge
• 5,000 per pack

Features

• 2-1/2-inch finish nails
• 16 gauge
• 2,500 per pack

Reviews (1)

Poor Quality Nails for the Porter-Cable Finish Nailer
These nails are not of the quality necessary for the Porter-Cable Finish Nailer that they are typically advertised with (FN250A). They sometimes came out 2 at a time, not at all, or caused the nailer to jam. I called Porter-Cable, and acquired their nails, and the problems went away. I would not recommend these nails, especially for this nailer. ... Read more

Features

• 3/4-inch finish brad nails
• 18 gauge
• 5,000 per pack

Reviews (2)

18 gauge brads in a 16 gauge nailer?
I haven't tried these yet, hence the neutral score, but I suspect Derek's problems might have been due to trying to use 18 gauge nails in a 16 gauge finish nailer (FN250A). No wonder they would misfire.

Poor Quality Nails for the Porter-Cable Finish Nailer
These nails are not of the quality necessary for the Porter-Cable Finish Nailer that they are typically advertised with (FN250A and others). They sometimes came out 2 at a time, not at all, or caused the nailer to jam. I called Porter-Cable, and acquired their nails, and the problems went away. I would not recommend these nails, especially for this nailer. ... Read more

Features

• 5/8-inch finish brad nails
• 18 gauge
• 5,000 per pack

Reviews (9)

Nail Utopia
Aurangzeb should pack some of these nails on his way to Mitchell Bros. for protection from, shall we say, the elements. Besides being totally wood-compliant (!), these nails would make for a great conversation starter at Mitchell Bros. for both Aurangzeb and Trenton.

Nails are cool - i saw Aurengzeb & Trenton @ Mitchell Bros
B&C Eagle B18-58 are the Brad Pitts in this marketplace. Women definately love to use these nails. Keep them in the cooler for parties and crucifictions. Aurengzeb and Trenton spend lots of money at Mitchell Bros

Breakthrough in nailing technology
These nails are outstanding. I agree with Aurangzeb. They are a major technological advancement. They are pointed, well driven, and respond favorably to the principles of adherence and cohesion. A must have in every home.

Disappointing performance
I have to say that, while I liked the way the B-18 looks, I found its performance desperately lacking. Some of the "enhancements" from the B-17 just don't justify the increased cost. For my money, the classic B-16 (the "Sgt. Pepper" of the Brad Nail) can't be beat.

Who the heck is Brad anyway? These nails SUCK!
I don't know what the rest of the reviewers were using their nails for, because I couldn't even get them to go into my wall, let alone hold something up with them. Every time I tried to pound one in, it just bent in half! After using these sorry excuses for fastening devices, I have only one word: SCREWS! ... Read more

Product Description

Porter Cable BN18200 2" 18 Gauge Brad Nails 5000 per Box ... Read more

Features

• Fits many standard 18 gauge brad nailers
• 18 gauge for fine finish work
• Galvanized for corrosion resistance

Product Description

Porter Cable BN18075 3/4" 18 Gauge Brad Nails 5000 per Box ... Read more

Features

• Fits many standard 18 gauge brad nailers
• 18 gauge for fine finish work
• Galvanized for corrosion resistance

Product Description

Porter Cable BN18100 1" 18 Gauge Brad Nails 5000 per Box ... Read more

Features

• Fits many standard 18 gauge brad nailers
• 18 gauge for fine finish work
• Galvanized for corrosion resistance

Features

• 2.5 x .125
• Includes 2,000 nails
• PASL9

Product Description

Porter Cable BN18175 1-3/4" 18 Gauge Brad Nails 5000 per Box ... Read more

Features

• Fits many standard 18 gauge brad nailers
• 18 gauge for fine finish work
• Galvanized for corrosion resistance

Product Description

Porter Cable BN18150 1-1/2" 18 Gauge Brad Nails 5000 per Box ... Read more

Features

• Fits many standard 18 gauge brad nailers
• 18 gauge for fine finish work
• Galvanized for corrosion resistance

Features

• Fits many standard 18 gauge brad nailers--see Product Description below
• 18 gauge for fine finish work
• 1-1/4" long for medium thickness materials
• Galvanized for corrosion resistance
• Fits Porter-Cable BN125, BN200, BN125A, and BN200A brad nailers

Features

• 2 x .125
• Includes 2,000 nails
• PASL9

Features

• 1.5 x .125
• Includes 2,000 nails
• PASL9

Product Description

5/8" 18GA BRAD NAILS GALV (5M) ... Read more