Features

• Tough Case holds 14 bits up to 3/8-inch
• Pilot Point Tip starts on contact for clean accurate holes
• No-spin shank eliminates the frustration of bit spinning in the chuck
• Tapered web provides greater durability to reduce breaking
• Pilot Point Tip reduces lock-up on breakthrough

Features

• One year warranty, One year service contract, 30 day no-risk trial
• Industrial Grade ABS material for maximum durability with interlocking hinge
• Bit retention system in case keeps bits in place
• Sliding rubber lock keeps case closed
• Drill Bit Sizes: (2) 1/16", 5/64", (2) 3/32", 7/64", (2) 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"

Reviews (2)

Excellent quality and durability
I was amazed at the rate these drill bits chew through metal... I drilled through a 1/4" of a piece of tempered steel in half a minute and through 16ga copper sheet in barely a second. The cobalt bits in the copper were incredible, I did not even have to apply much pressure to get the bit to bite.

Very impressed.

Great bits in a sturdy case
What a great purchase! The bits are sharp and sturdy, and they cut through wood like it's butter. They come to a point at a wide angle, so they're less likely to slide away from your drilling point as you start drilling.

I've only owned them for a few weeks, so I can't attest to how long they'll stay this sharp. Also, I've yet to try drilling through metal.

The set comes with two bits for some of the popular sizes, which is great since I tend to lose or break my 1/8" bit all the time.

The case itself is quite sturdy, but a little oversized. The bits are held firmly in place, so you never open your case after a bumpy car ride to have all 13 bits fall to your feet. If you own a DeWalt drill, it fits snugly in the drill case.

My one complaint is that the sliding lock is really tough to open and close. ... Read more

Product Description

Pilot Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough. No-Spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent them from wearing away. ... Read more

Features

• Size markings on bit located above the shank for easy reference
• Pilot Point Tip starts on contact for clean, accurate holes
• Pilot Point Tip reduces lock-up on break-through
• Tapered web provides greater durability to reduce breaking
• No Spin Shank eliminates the frustration of bits spinning in chuck

Reviews (1)

These are very good bits!
I bought this set at Lowe's and so far I am very pleased with their quality.I paid about the same price but I also got a free DeWalt baseball cap in the deal!The bits have stayed sharp through many projects and this new design for the case is a vast improvement - the hinge is much stronger and I feel it will hold up well.Because this assortment includes all of the sizes you would use most often, I keep mine right in the case with my DeWalt cordless drill so I am never without them!

Buy these and you won't regret it - especially if you often work away from your workshop!
... Read more

Product Description

Titanium nitride coated bits last up to six times as long as uncoated bits. 29-piece set includes bits ranging from 1/16" to 1/2" in increments of 1/64". 115-piece set features 29 fractional bits from 1/16" to 1/2" in increments of 1/64", letter bits from A to Z and 60 number bits. Housed in rugged steel cases. ... Read more

Product Description

Titanium nitride coated bits last up to six times as long as uncoated bits. 29-piece set includes bits ranging from 1/16" to 1/2" in increments of 1/64". 115-piece set features 29 fractional bits from 1/16" to 1/2" in increments of 1/64", letter bits from A to Z and 60 number bits. Housed in rugged steel cases. ... Read more

Product Description

This 50-pc. Metric Drill Set is Titanium Nitride coated high speed steel for toughness and long service life. Includes 1mm through 6mm in .1mm increments plus steel index. ... Read more

Product Description

Complete set of tin Coated Brad Point Bits from 1/8" to 1/2" by 64ths. tin coating provides long-lasting sharpness and increased customer satisfaction over other types of bits. Packaged in a steel index. ... Read more

Product Description

Because of its resistance to heat and stress, Cobalt Alloy bits turn faster without overheating. The 135 DEG split point enables the drill to use less thrust and eliminates the tendency of the drill point to walk which makes these great for use in portable drills or drill presses. Cobalt Alloy bits will retain their edge sharpness longer than normal HSS bits, resulting in a significant saving of time and money in the workshop. We've assembled some fantastic money-saving sets here. All sets include a heavy-gauge steel index case for storing. ... Read more

Features

• Full lifetime warranty
• 12 hole sizes
• Easy-to-sharpen, non-skid tip
• Single-fluted cutting edge
• 3 flatted shank

Reviews (1)

Great for it's designed purpose..
The unibit is fantastic for putting holes in thinner material. A plus is the hole will be deburred on the side you are drilling from. When drilling stainless steel (my experience was with 1/8" 316 ss) be careful to reduce RPM as each step goes through. It can work harden the material easily, and ruin the bit. A definate "MUST HAVE" for working with electrical enclosures and panels as well as sheet metal. Just don't throw away your normal twist drills. ... Read more

Product Description

Drill flat-bottomed holes in any wood. 7 piece set comes in plastic pouch and includes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" & 1/2" bits. 25 piece set comes in metal case and includes bits from 1/8" to 1/2" by 1/64", 1/4" shank. ... Read more

Product Description

Drill perfectly centered pilot holes for mounting hinges, brackets and hardware. High speed steel bits are replaceable and can be adjusted for depth. Five-piece set includes sizes: .250, .281, .312, .374 & .438. ... Read more

Product Description

Rapid Load provides quick and easy accessory changes without rechucking, have a hex shank locking system to prevent slipping and fit all brands of 3/8" and 1/2" cordless and corded drills. ... Read more

Features

• One year warranty, One year service contract, 30 day no-risk trial
• 135 degree split point drills on contact and prevents from walking
• Parabolic flute design improves chip ejection in metal and wood drilling applications
• Black oxide coated for greater resistance to wear
• Helix is 31 degrees which minimizes the over aggressiveness of a true parbolic flute

Features

• Size markings on bit located above the shank for easy reference
• Pilot Point Tip starts on contact for clean, accurate holes
• Pilot Point Tip reduces lock-up on break-through
• Tapered web provides greater durability to reduce breaking
• No Spin Shank eliminates the frustration of bit spinning in chuck

Product Description

These longer length high speed steel drill bits can reach into areas that are difficult to access with standard length drill bits. Model G9750 includes 1/16" - 1/4" by 64ths X 6" long. Model G9751 includes 1/16" - 1/2" by 64ths X 12" long. Model G9752 includes 1 - 60 wire gauge sizes X 6" long. ... Read more

Product Description

Brad Point Drill HSS Regular Length Fraction ... Read more

Features

• Made in the USA by American Craftsmen
• Brad Point for Clean Accurately Sized Holes in Wood
• Made from industrial quality US High Speed Steel
• Standard Regular or Jobbers Length
• To Cut Woods and Plastics

Product Description

This Deluxe 25-Piece Brad Point Set includes bits in sizes fro 1/8" to 1/2" by 1/64" increments all enclosed in a steel index for easy selection and great organization. ... Read more

Features

• Brad Point set includes bits in sizes from;
• 1/8" to 1/2" by 1/64" increments
• Comes in a steel index

Product Description

Brad point starts drill, eliminating the need to pre-punch centers. High speed steel, for hard or soft wood. Sizes: 1/8in. to 1/2in. by 16ths. ... Read more

Features

• Most common steps highlighted for quick recognition
• Multiple steps eliminate need for many special sized drill bits
• Double fluted design for optimum speed and accuracy
• Flats on shank prevent bit slipping in chuck
• Size marking(s) for easier hole identification

Product Description

Just like the bits above, but tin coated bits stay sharper longer. ... Read more