Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 5/8" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Features

• 6" reach
• Easy release handle
• Large non-marring pad

Product Description

Senco Powerplus Stapler.Applications: Cabinets casebacks drawers upholstery spring attachment insulativesheathing underlayment sheathing soffits molding and trim lattice. The ergonomically designed SLS25XP stapler from SENCO? is powerful and versatile. This new-generation stapler weighs just 2.7 lbs, yet has the power to drive 1-1/2" staples into hard woods. Drives 1/4" crown staples in lengths from 3/8" - 1-1/2". ... Read more

Features

• Two Year Warranty
• Lightweight (2.7 lbs) for ease of handling
• Ergonomically designed with a comfort grip handle to reduce fatique and overmold trigger
• Adjustable depth of drive
• 40% more power than comparable tools

Features

• Soft grip handle
• FinishPro18 drives 18 gauge brads 5/8-inch to 2 inches
• Includes case, fittings, repair tools, and oil
• One-year warranty
• Adjustable depth-of-drive

Reviews (2)

Ok gun, few problems
I am a trimmer by trade so keep in mind I shoot 300 nails a day with this gun, so some problems might be purely wear related.

It is a descent gun, we have 75+ of them at work and they are descent except for a few very common problems.

1. If you have one of the first ones off the line the triggers have a tendency to not work correctly. The safety doesn't keep the gun from firing, so in other words you can pull the trigger and the gun will fire without pushing it against anything. There was a recall for the triggers, so I am assuming the more recently built ones are fixed.

2. We have had problems with the guns not setting the nails completely. It happens in about 10% of them. When the gun is pushed against the wood, the tip of the gun won't go all the way against it, doesn't matter if you have the depth set to the deepest setting. This can be fixed by grinding down the safey and the nose a little bit.

3. Sometimes the gun won't shoot a nail. It will fire, but the firing pin will go between the nails and the casing. I am not sure if it is the nails not sliding ahead far enough or something else. This could be the brand of nails.

But overall nothing that would keep me from buying another one.

Nice price for SENCO
Decided to get a brad nailer for case and baseboard molding, with the intention to use it for cabinetry and other woodworking in the future. (If I only planned on using it for house trim work, I would have gone with a 16 or 15 gauge nailer, yes.)

I didn't notice anything obviously better between the Senco, Porter Cable, Bostitch, etc. But when you read the reviews, no one ever seems to be able to dislike a Senco nailer. Have you noticed this trend? So, this was enough reason for me to spend the few extra dollars on the Senco.

I must say that I am in no way disappointed with this nailer's performance. I put up baseboards around a 21x21 room with some funny angles, as well as casing on a couple doors. It always sunk that little 2" brad just right. No surprises at all. Never a jam. It didn't mar that pre-primed soft molding, either. I really felt this thing was on my side, trying to accomplish the same thing I was. One nice feature is the rear exhaust. The exhaust air comes out the back of the tool, just above the air inlet. Not much chance of staining your work with the oily discharge air.

The only complaint I can come up with is the way the cushion grip is designed. The grip is a cushy material that is wrapped around the body. But the material overlaps itself on the bottom side of the grip, near the trigger. It feels a little funny at first, and I wonder if it will forever remain stuck to itself, or if this will someday seperate and start peeling away. Oh well, I can't take points away for something I only fear will happen.

I definitely recommend this nailer to anyone in the market for one. ... Read more

Features

• solid wood plugs are made from accurate dowel for a great fit
• Cut to match the pocket's angle for minimal sanding
• 50-count bag

Features

• Made from quality doweling for solid joining
• Cut to match the pocket's angle for minimal sanding
• Plugs blend with wood even in high-vis applications
• 50-count bag of pine pocket hole plugs

Product Description

Peel and stick. White PVC. Available in 50Ft and 250Ft Rolls. ... Read more

Features

• 15/16" x 250' Roll
• Great for field installation

Product Description

The 3rd Hand and Little Hand provide support, brace or clamp for whenever you might need extra help. ... Read more

Features

• Little Hand HD 15.7in To 24.4in Ext
• Same as Third Hand except 15.7" - 24.4" extension

Product Description

The 3rd Hand and Little Hand provide support, brace or clamp for whenever you might need extra help. ... Read more

Features

• 3rd Hand HD 5 Ft To 12 Ft Ext
• Heavy gauge main shaft and extension rod
• Stonger more ergonomic action lever
• Smaller footprint for articulating feet
• Ball-detent for positive locking

Features

• Keeps workpieces flush while joining face frames, picture frames, and other flat stock
• High quality steel for positive clamping and durability
• Large rubber pad eliminates marring of the workpiece
• Keeps the workpieces aligned, even when screws go in funny
• Gives you more hands to work with

Reviews (1)

For Pocketholing!
I use this clamp with Kreg's pockethole jig and has been very useful. It has many more uses. You won't be dissappointed with this clamp. The quality of the steel is very good. ... Read more

Features

• Solvent Free & nonflammable
• 30 sec set time
• Fast set for quick assembly
• Reduces the need for clamping
• Ideal for general woodworking and cabinetry

Features

• 36x11-1/4in Stemware Holder MAPLE
• Solid wood fully sanded and ready for finishing
• 18" = 4 rows 30" = 7 rows 36" = 8 rows

Features

• Reduces need for mechanical fasteners
• 75 sec set time
• Versatile performance
• Longer open time for precise assembly
• Bonds most common materials

Reviews (1)

side by side comparison
i had to get a plastic curtain hung right away. i used this to attach several hundred feet of velcro stripping. it was ready for immediate use! i could attach and re-attach the velcro without worry. it never pulled off! when i ran out i used another brand epoxy glue which took until the next day to set. the gun heats up quickly. i have stored and re-used a tube without any problems. good to have available for rush jobs, etc. but not for every day. cost is the limiting factor, not performance. ... Read more

Features

• For pockets
• 50-count bag

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 700 2-1/2" finish nails per clam shell
• 15 gauge non-galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects

Reviews (1)

SIZE MATTERS
THE ACCUSET 2 1/2" NAIL WAS PERFECT FOR NAILING DOWN MY SUB FLOOR
IN MY NEW DINING ROOM,ALSO I NEEDED TO HANG THICK WIDE CROWN MOLDING AND THIS ACCUSET NAIL WAS THE PERFECT SIZE FOR THESE JOBS..LET ME ALSO SAY THE FLOOR OR MOLDING AINT GOING ANYWHERE WITH THESE NAILS SECURING THEM DOWN ... Read more

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 700 1-1/2" finish nails per clam shell
• 15 gauge non-galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects

Features

• Solvent Free & nonflammable
• 60 sec set time
• Fills gaps and irregularities
• Reduces the need for clamping
• Ideal for general woodworking and cabinetry

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 700 2" finish nails per clam shell
• 15 gauge galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects

Product Description

Wire single row stemware holder in brass or chrome ... Read more

Features

• Stemware Hldr 11-1/2in Sgl Row CHR
• For smaller areas
• Single Row Stemware Holder is designed for under cabinet installation
• This item allows the designer to utilize any additional space for glass storage.

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 700 2-1/2" finish nails per clam shell
• 15 gauge galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects