Product Description

Only available 2-Way Remotes with 66-bit Code-Hopping! * Includes a Belt Clip * Vehicle Recovery System * Turbo timer and defroster activation output built-in. * Parking light flash * Dedicated 1 button start * +/- Doorlock Polarity Outputs * One 4-button LCD Remote * 5 channels * 5 zones * Flashing L.E.D. light * Valet switch * Starter Disable built-in * 6 Tone Revenger Siren * Remote Panic/Car Finder * $2,500 Guaranteed Protection Plan * Viper quality, with Limited Lifetime Warranty! * Super High Frequency (SHF): The best range in the industry! * XCRS-4 relay/extreme capacity relay satellite. * Automatic configuration of transmitter buttons. * All models are Clone-Safe. * Diesel mode now with dedicated glow plug input. * Complete engine monitoring: Off, voltage, or tach * Longer run time: 12, 24 or 60 minutes programmable. (0-60 minutes with the Bitwriter) * Dedicated factory security control wires. * Viper GPS Tracking System: through ESP 2 serial port ... Read more

Features

• User-friendly 2-Way Remote with the Ultimate 2-Way Security and Remote Start system!
• Responder Technology: Unique LCD Interface for 2-Way communication of command confirmations and trigger events!
• Confirms all commands with easy-to-understand icons, plus text!
• Alerts users to security system triggers by Beeping or Vibrating!
• Responder alerts you when too far away to hear it.

Features

• Assembled dimensions: 79" high x 26" wide x 19" deep (from wall)
• Bikes not included
• No bolts, screws or fasteners required
• Independent adjustment arms for level bike storage
• Vinyl-coated bike cradles and base protect bikes and floor

Reviews (11)

Arrive unfunctional
This rack seems like it'd be a good idea. I bought it to free up some space inside my apartment. However, when I received the rack, I was unable to fit the pieces together.

I called the customer support people at Racor and they were very friendly. They are going to ship out a new piece for the middle which should fit.

If this works, it'll be a nice rack. Mine's not scraped up like the other reviews. However, I have yet to see if this will work.

Only holds one bike, doesn't stand up straight.
1. The packaging was poor and the base was badly scratched when I received it.

2. I'm 6'2" and I have two tall bikes. The rack is too short for both of them. With the top bracket at the highest setting, the bottom bike won't fit below it. I paid a welder $30 to change the angle of the top bracket so that it goes up 45 degrees. Now there is room for the second bike. Now the rack costs $80.

3. The joints in the rack are wobbly, so my rack tilts to the right about 5 degrees. I think it's ugly. I'm going to screw the top of the rack into the wall to fix this. That kinda defeats the purpose of a "gravity" rack.

Now that I've got it fixed up, it does what it's supposed to. Kind of a pain but it works, and it's still pretty cheap at $80.

It works and it's a deal
like other reviewers my box arrived a bit beat up, i was half expecting to find parts missing. unlike others i had no problem assembling it and it seems very sturdy. for the price you aren't going to find a better deal.

i've got way too many bikes in too small of an apartment. the lower half seems a bit useless (all my bikes are pretty big though). it's not tall enough to get the bottom bike off the floor so you can't store anything there. i'm thinking about removing the lower arms and just leaning a couple of bikes there. it's already getting my apartment into shape.

Just what I wanted!
I've been wanting a bike rack like this for years. I've tried products that seemed similar, and they just didn't work for me. This one's exactly what I was looking for.

APPEARANCE
The rack arrived with no scratches. This was a surprise, given that two of the sections that make up the vertical post were loose in the manufacturer's box, and the box was a bit battered.

The rack itself looks great in my garage.

STABILITY
When positioned against (or near) a wall, the rack sways mildly when a bike is removed or replaced. The base is big enough and the overall design is such that removing the bottom bike (gently) doesn't seem to cause the whole thing to fall over--as long as the wall is there for backup. The manufacturer recommends anchoring the rack to the wall and includes hardware for this purpose.

ASSEMBLY
The central post is delivered in three sections: The base is the curved "T" that you can see in the picture on the Amazon site. The other two sections form the vertical tube.

These main sections fit very tightly together. As far as I'm concerned, this makes the whole thing more internally stable. To assemble the central post, I relied on a many squirts from my trusty can of WD-40, some wiggling, gravity, and patience. Without all that, I would've been stuck (and the sections would've been too).

The four arms that hold the two bikes attach into slots on either side of the vertical tube. I used a small block of wood to knock the arms in and out of the slots (I don't have a mallet, and it seemed like a hammer would dent/scratch the finish). Each bike is held by resting the top tube in cradles (at the end of each arm). The cradles easily rotate as needed to adapt to the angle of the top tube. Nice touch.

It definitely took some effort to put this rack together. However, I'm pleased with the results so far. It really frees up space! Taking it apart will be an interesting challenge some day.

Is it worth the price? Well... Even with the Amazon price, it seems a bit more expensive than other garage-quality bike racks. However, over the years I've spent more in total on other racks that didn't work out for me at all. This one is just what I wanted!

worst purchase ever
The pieces would not fit together, after hours of trying lube, force and then the hammer, nothing worked. One of the tubes finally split and now there is no hope of making it work. It seemed like a good idea, but I was just taken for $60.00.

Don't buy this product ... Read more

Features

• Bikes can be stored in the same or alternate directions
• Easy for children to use
• Tubular steel construction, durable epoxy finish

Reviews (10)

Not for medium-size wheels
What I like about this stand is that it's sturdy. Also, the size is pretty good for standard bikes.

I had two problems with this stand, but they are likely the exception rather than the rule:

1. My box contained two "left" racks. Picture this:
Symmetrical: U--U
Two left racks: -U-U
Oops.
The problem with simply reversing the U-shaped rack on the left is that the front/top of each U contains recessed holes that allow the heads of certain screws to sit flush with the tube. If you reverse a U, you lose that cosmetic benefit (and you need longer screws). This is a minor problem and it's probably an exceptional case. If you're the one who got the box with two "right" Us, feel free to propose a trade :)

2. A standard-size road bike fits adequately. On my non-standard bike, the 24" wheels are too small to fit into the U-shaped racks. The problem is due to the angle of the U-shaped racks with respect to the floor, the size of the tube at the base of the rack, and how those factors impact the rear derailleur. (It's a long story. I won't try to explain it.)
The wheels don't fit in the "alternate direction" either, due to insufficient clearance between the arch of the U and the rear base tube of the rack.

Quality Control...
I received my Racor PBS-2R bike rack today and was quite disappointed the minute that I opened the box. The rack was shipped in its original packaging and the box was mildly beat up. Most of the hardware was floating around in the box not in the bags like they should have been. Most of the pieces were scratched as well.
Once I started putting it together I realized that I had two left U's. Flipping over one of the U's works, but the screws will no longer be recessed like they should be. It works, but I am not the only person to have this problem. There are other people who have complained about the same problem here on Amazon. After reading the other reviews I decided against ordering two, and ordered only one to be safe. I am glad I did. I won't be ordering the second one unless they improve their Quality Control.

Great for the money
I had the same issue as another reviewer - the same "U" brackets (i.e. two "left" brackets) - I called the company - this is intentional (probably to save money). You will need to use two longer screws for one of the "U"s and two of the shorter ones for the "U" with the recessed holes (none of this makes sense now - but it will when you put it together). But it will fit together. Once done - it works great - holds my Specialized Rockhopper very firmly - and looks good (second bike - no problem). For the money (29.99 at amazon plus free shipping) - was best price around.

missing pieces
Can't rate the product 'cause I can't put it together. Box was not taped for shipping and arrived without the bag of hardware. If you're going to buy one, find one in a store if you can and inspect it carefully before taking it home. Shame on Amazon.

great for kid and adult sized bikes
We have four bikes - 2 adults and two kids. So, I bought two stands, and they work great. I turned it around for the kids' bikes and put the front tire in first. We have had no problem with them falling over. Even my four-year old is putting his bike away now! I was very tired of tripping over bikes - its nice to (1) have a way to keep the bikes upright, and (2) have a desginated place to park them.

Bonus - two scooters fit nicely in the front side of the kids bike rack - we just leaned them two opposite ways, and they stay fine.

The price for two was comparible to many four bike systems, but we like the flexability of locating two racks. ... Read more

Product Description

Responder Systems from Clifford are simply the most advanced 2-Way Security and Remote Start systems in the world! The interactive display on the Responder remote confirms all commands - virtually instantly - with easy to understand icons, plus text! It alerts users to security system triggers by beeping or vibrating when out of audible range of the siren. And of course the RSX 3.5 will start your vehicle with the push of a button, and you'll get confirmation back that it started, from up to one-quarter mile away Cliffrod RSX 3.5 2-Way Security and Remote Start System with Responder Technology 5 channel security/remote start* system with 3 auxiliary outputs for additional remote control conveniences.* Factory B-stock ... Read more

Features

• Car Alarm 2-Way Remote Start and Security System
• The first FCC-legal 2-Way Remote with 66-Bit Clone-Safe Code-Hopping
• Alerts you to security system alarm events by beeping or vibrating when the system is triggered
• Includes a 1 Year Factory Warranty

Product Description

Tire Pressure Monitoring System for 10 wheel RV and towed vehicle or trailer system. Included are velcro pads, power cord and complete installation/operating instructions. No tools are necessary to install Doran PressurePro and the system is simple to op ... Read more

Features

• Monitor displays current tire pressures for all tires
• Doran PressurePro alerts to dangerous low-pressure situations with both a visual and an audible warning.
• Greater stability, handling and braking with tires properly inflated. Tires with low air pressure skid and hydroplane more easily.
• Doran PressurePro requires no costly installation, installs in minutes with no tools.

Product Description

Largest Capacity Carrier for all of your additional Cargo. 18 Cu. Ft. Capacity. Made in High Molecular Weight Polyethylene - UV Stabilized. Passenger-side opening w/quick release snap-lock. Camlock w/2 keys for security. Max load of 110lb. Mounting Kit sold separately (#90490 or 90570). 2-year Warranty. Must purchase Mounting Kit: #90490 mounts box to Roof Rack, #90570 mounts box to Roof w/o Roof Rack. *** Oversized Box will ship Common Carrier *** ... Read more

Features

• Largest CapacityCarrier - 18 Cu.Ft. for Cargo.
• Passenger-side opening w/quick release.
• Compatible w/ or w/o Roof Rack.
• Camlock with 2 Keys for Security.
• 2-Year Warranty. Product Weighs 27 lbs.

Product Description

Responder Systems from Viper are simply the most advanced 2-Way Security & Remote Start systems in the world! The interactive display on the Responder remote confirms all commands - virtually instantly - w/easy to understand icons, plus text! It alerts users to security system triggers by beeping or vibrating when out of audible range of the siren. & of course the 791XV & 591XV will start your vehicle w/the push of a button, & you'll get confirmation back that it started, from up to one-quarter mile away! Viper 791XV 2-Way Security & Remote Start System w/Responder Technology 5 channel security/remote start system w/3 auxiliary outputs for additional remote control conveniences. ... Read more

Features

• 2-Way Security & Remote Start
• Responder Technology
• 5 channel security/remote start system
• Effective from up to one-quarter mile away

Amazon.com Product Description

Turn two-by-fours into any shelving you need using only a saw and screwdriver. Using ShelfLinks, you can connect inexpensive two-by-fours in any shelving configuration you need with just a few square saw cuts and a screwdriver. Build a great-looking entertainment center on the cheap. Quickly put up shelving in your garage and organize your tools and clutter once and for all. Anywhere you need a custom shelving solution, ShelfLinks make it happen quicker and less expensively than using flimsy, one-size-only plastic or metal shelving. Using a building-block mentality, ShelfLinks are easy to put together and can be modified or added to as storage or work areas change. Worried about strength? ShelfLinks support spans up to 8 feet, and each shelf can hold up to 1,000 pounds. ... Read more

Features

• Easy to build shelves require only straight cuts
• Rugged, heavy duty- holds 1000 lbs per shelf
• Make any size to fit anywhere you need them
• Lifetime warranty

Reviews (3)

Brackets don't fit 2x4's snugly
I was disappointed to see a 1/4" gap between the 2x4 and the bracket on the longer dimension. (My 2x4's are 1-1/2"x3-1/2", but the opening is 3-3/4" wide.)

Need more than a saw and a screwdriver
This is a great product. You can build these shelves with just a saw and a screwdriver, BUT you better have a lot of strength in that screw driving arm, a great eye for right angles, and a lot of time if you plan to cut all of those two-by-fours with a hand saw. I suggest that optimal tools for the job are: tape measure, angle, level, circular saw, and power drill with a phillips head or a power screwdriver.

Instead of buying off the shelf units that may or may not fit the space intended, and which cost substantially more, you can build customized shelves that fit the space perfectly. If you live in an urban area where storage space is tight and getting the most out of every square foot is important, then this product can be useful. I buy the cheapest two-by-fours available and use the shelves for storage in my basement. Note: the shelves are 16" deep.

GREAT PRODUCT
Everything to make "shelf building" simple. It's flexable and easy to configure to just about any dimensions you might need. If you can saw a straight line and know how to use a screwdriver you are in business. ... Read more

Features

• Can be used in garage, work place, basement
• 330-pound capacity
• 29-by-19-inch platform with vinyl wrap-around bumper
• 4-inch steel casters; 2 fixed and 2 swivel
• Fold down handle for easy storage, 31-inch handle height (top to floor)

Reviews (1)

Too small for much
I like the idea of a flat-folding utility cart that is easy to store and handles a lot of weight. However, when I received it, I found it really too small to carry much. I wanted to use it to carry my 3-legged Rottweiler when she gets tired on walks; I was hoping that her butt could stick out the back end. The handle bar takes up some of the cargo space in the back of the platform, which makes it even smaller. I discovered that the manufacturer, Sisco, also makes a DC-200 model which is larger and more feasible (36 x 24), but finding the manufacturer was quite a challenge. I found only their address through the Superpages.com, which was noted as a different city vs. the instruction/assembly page (Rancho Dominguez).

In case you need their contact info:

Sisco Inc.
2945 E. Maria Street
Compton, CA 90221-5801
(310) 638-1182

I suspect they may be out of business as I tried a reverse lookup on the phone number, and Smartpages.com said it didn't exist. I'll try writing to them to try and find the larger size and see if I get a response.... ... Read more

Product Description

The Extang Trifecta ™ has a unique tri-fold design that offers many benefits and features.The Trifecta ™ folding truck bed cover has only three steps to install, extremely fast and simple, installs in seconds with no tools, and is easy and fast to secure and release.This trifold tonneau cover is constructed of a premium sewn quality double-layered vinyl with anti-curl corners.The tri-fold tonno cover also has heavy duty commercial grade anodized rails and bows secured with multiple reinforcements using zinc dichromate, aluminum braces.It has an advanced sealing system with pro-grade labyrinth seals.The Extang Trifecta has a lifetime warranty. ... Read more

Features

• Extang Trifecta ™ folding bed cover is constructed of premium sewn quality doubled layered vinyl with anti-curl corners. Commercial grade anodized rails and bows secured with multiple reinforcements using zinc dichromate, aluminum braces- offers a solid, well-built feel.
• Heavy-duty locking straps secure tonno in the open position. The new clamping system is extremely strong glass-filled nylon constructed speed klamps. The speed klamps stow away within the rails when tarp is open using quick over center adjustable, snap locking cam lever action
• New max hinges, which are double pivot hinges with a center link and padded seals. Engineered to last.
• Advanced sealing system with pro grade labyrinth seals. Permi-seal tarp, pre-attached to rails with automotive grade polyethylene linear arrow everlock system.
• Comes completely assembled with a lifetime Warranty

Product Description

The Yakima KingPin 4's bike arms fold down easily with the new Quick Cam lever when the bikes are removed. The mast also folds down conveniently when free of bikes for vehicle access. The KingPin 4 carries almost all bikes without needing top-tube adaptors. The SwitchBlade anti-sway bike cradles keep your bikes scratch free until you inflict your own damage on the ride. The KingPin 4 holds up to 4 bikes, and fits a 2 receiver hitch. Optional accessories include the DeadLock System [YAK0135], 1adapter [YAK0141], and PowderHorn ski and snowboard rack [YAK0134]. ... Read more

Product Description

HitchCAM's FrameCAM Rear Back-up Camera improves the visibility of vehicles by exposing the rear blind spots that can extend as far as 20' back. Features an automatic low-light function that allows the camera to work night and day. The monitor can be switched on any time or set to automatically turn on when the vehicle shifts into reverse. Plug-and-play design allows system to be easily installed by most technicians. Designed to install onto any vehicle using the existing license plate moutning holes. 2-year limited warranty. Kit hardware includes: Aluminum license plate frame with built-in, swivel-mounted color camera with wide angle lens; Waterproof Sony 1/3in HAD CCD Camera integrated with license plate frame.; 3.5in Color LCD monitor with windshield mounting bracket.; 25' Power/Video cable.; Fused wire harness.; 30-Amp J-case fuse for 2003-up GM models. ... Read more

Features

• HitchCAM's FrameCAM Rear Back-up Camera improves the visibility of vehicles by exposing the rear blind spots that can extend as far as 20' back.
• Features an automatic low-light function that allows the camera to work night and day.
• The monitor can be switched on any time or set to automatically turn on when the vehicle shifts into reverse.
• Plug-and-play design allows system to be easily installed by most technicians.
• Designed to install onto any vehicle using the existing license plate moutning holes.

Product Description

The Challenger Series Gull Wing Tool Box includes J-bolt mounting hardware, which requires no drilling into the truck bed. Three piece construction and fully welded seams strengthen the integrity of the box. Twin commercial gas struts lift lid automatically for easy one-hand use. Due to the size and weight of this item, freight charges will be included in S/H. For downsized trucks, imports, short wheel base. Also fits Nissan Frontier Crew Cab. Notched box. ... Read more

Features

• The Challenger Series Gull Wing Tool Box includes J-bolt mounting hardware, which requires no drilling into the truck bed.
• Three piece construction and fully welded seams strengthen the integrity of the box.
• Twin commercial gas struts lift lid automatically for easy one-hand use.
• Due to the size and weight of this item, freight charges will be included in S/H.
• For downsized trucks, imports, short wheel base. Also fits Nissan Frontier Crew Cab. Notched box. Dimensions: 60 1/4 x 20 1/2 x 14 x 8 3/4 x 51 1/2 x 18 x 4 1/8 inches.

Product Description

The Putco Skins NeveRust Mirror Finish Stainless Steel and Tread Brite Aluminum Bed caps are the very best for top of the bed protection.The No Drill installation makes installation a snap!They are precision fit, with or without stake pocket holes.The tailgate guard/protectors are sold separately. ... Read more

Features

• Putco Skins - These pickup bed caps offer an easy, no drill, at home installation using 3M adhesive tape
• Wrapped corners and Precision fit. Available with or without stake pocket hole cut outs
• Available in Never Rust stainless steel or Tread Brite Aluminum
• Putco Pickup Bed Caps are the Toughest for top of the bed protection. Plus the work great with Putco locker bed rails and most tonneau covers and toppers.
• Backed by the Putco NeveRust limited lifetime warranty

Features

• Sales restricted to the United States and shipment is prohibited to addresses in Virginia and Washington DC
• FCC Identification Number BBOESD6060

Product Description

The Escape cargo bag offers you the capacity and quality of a Thule roof box, but is foldable for easy storage. It attaches to aftermarket and factory installed racks with nylon straps. Bag is made of double walled PVC coated nylon, with storm flaps and PVC taped seams. ... Read more

Features

• 15 cubic foot capacity.
• Exclusive foam-insert construction helps maintain bag's shape for easier packing and cleaner look.
• Easy bag handling with heavy-duty rubber molded handles.
• Large internal mesh pockets for convenient storage of smaller items. Includes stuff sack for storage. Length 41", width 34", height 18".

Reviews (1)

Leaky, leaky, LEAKY!!!
We were SOO impressed that after filling this thing to the brim with all of the toys, books and other gifts that my son received for his 1st birthday (on an 8-10 hour trip) that there wasn't really much wind noise at all.It did make the mileage a bit worse due to the resistance but we didn't care.

The REAL problem came after we got home.Almost everything was SOAKED!Luckily lots of things were in water resistant bags but a lot of the books he got were basically ruined :-(

We read all directions and installed it carefully and securely.It only rained for about 30 minutes while on the road and it wasn't like huge puddles inside of it but there were considerable amount of water in certain parts of the carrier that must have trickled in while it was raining.

Soooo...If you're absolutely 100% sure it's not gonna rain or if you're not carrying anything that's water soluble then it's fine...otherwise, I'd steer clear!! ... Read more

Features

• Holds up to 3 bikes
• Strong 6' locking 8mm key cable
• Durable straps
• Red reflective end-caps

Reviews (3)

Great for the price!
I've had this bike rack since last summer and have had no problems with it.It states clearly in the directions to make sure the area where you place the padded bars is clean.If there is any debris between the pad and car, it will scratch your paint.This has nothing to do with the rack itself.I have driven my car 300 miles in each direction with 2 bikes on the rack.I have no complaints.I found it easy to use and it gets the job done.

Do not buy this product!
I live in a major summer vacation area and was extermely excited when I noticed these convienient bike carriers everywhere last year.I asked a woman where she found hers and she said that she loved it for transporting her one bicycle around the area.This Christmas I added this to my list thinking it would be great to take our three children riding more often.I followed the instructions implicitly and was not at all put off by the difficulty I had getting the bikes fitted and tightly secured.Come on- I wasn't expecting cheap, convient, and easy to all come together perfectly, but I was extremely infuriated when the day after our first trip, my husband noticed a 4 inch pressure dent in the rear of our vehicle.I will be contacting BELL when they open on Monday.

good bike rack
this is a great bike rack buy it!!!!!!!!!!!! ... Read more

Product Description

1996-2000 Honda Civic Bomber Style Full Bodykit ... Read more

Features

• Includes Front Bumper, Side Skirts and Rear Bumper
• High Quality Handlaid Fiberglass
• Great Fitment
• Fast Shipping

Product Description

The Bedrug's molded foam floor can't scratch your truck's bed like hard liners.It is molded specifically to fit each model of each truck.The floor, tailgate, sides and bulkhead are precisely molded and di cut to factory specifications.The polyester carpet and molded closed-cell polyethylene foam create a flat cushioned floor.It fits your pickup bed like a glove. ... Read more

Features

• made of polyester carpet and molded closed-cell polyethylene
• fits your truck like a glove and is water proof and stain resistant
• totally tough, gasoline, acids, solvents, chemical compound will not damage the carpet or foam
• The floor, tailgate, sides and bulkhead are precisely molded and di cut to factory specifications.
• The polyester carpet and molded closed-cell polyethylene foam create a flat cushioned floor.

Product Description

The Bedrug's molded foam floor can't scratch your truck's bed like hard liners.It is molded specifically to fit each model of each truck.The floor, tailgate, sides and bulkhead are precisely molded and di cut to factory specifications.The polyester carpet and molded closed-cell polyethylene foam create a flat cushioned floor.It fits your pickup bed like a glove. ... Read more

Features

• made of polyester carpet and molded closed-cell polyethylene
• fits your truck like a glove and is water proof and stain resistant
• totally tough, gasoline, acids, solvents, chemical compound will not damage the carpet or foam
• The floor, tailgate, sides and bulkhead are precisely molded and di cut to factory specifications.
• The polyester carpet and molded closed-cell polyethylene foam create a flat cushioned floor.