Amazon.com

Like the other Trimmer Plus attachments Ryobi offers, this one turns your trimmer into yet another tool. Snap on the tree pruner, with or without the extension boom, and make short work of tree trimming and shaping without setting foot on a ladder. Aggressive blades work at 2,000 strokes per minute, chomping through branches up to 4 inches in diameter. Because of its length, it does affect the balance of the tool in hand, but with a little getting used to, it works like a charm.--Kris Jensen-Van Heste ... Read more

Features

• Can be used with any Ryobi TrimmerPlus unit
• Add-on tree pruner will cut branches up to 4 inches
• 2000 strokes per minute for fast and easy pruning
• Extension boom included for hard-to-reach branches
• Install and take off in seconds with Clink-Link shaft

Reviews (13)

Useful but slow cutting
I have several live oaks in my yard that need a lot of pruning. I can cut branches about 12 feet high from a step ladder using a chain saw or lopping shears. With this tool I can get at limbs up to 20 feet high.

But I was a little disappointed in the cutting performance. I did not expect it to work as well as a chain saw, but I expected it to work better than it does with the aggressive teeth on the blade. It is difficult to get good leverage on the blade while holding the trimmer with both hands so close to the back end of the trimmer. It does good on limbs up to 1" in diameter, but it takes several minutes to cut through a limb that is 3" in diameter, and that is an eternity while holding the trimmer at an awkward angle over your head.

Great Add on
This tree/bush pruner is really great. I have a half acre with a wide variety of trees. Apple and Pear trees are a snap with this baby. Over grown rose of sharon is no problem. Oak does take a little longer to get through but hey, I'm not standing on a ladder sawing the old fasioned way and breaking a blade. I fully recommend this item. I have the blower/vac, hedge trimmer and snow thrower attachments for my Ryobi and this pruner really takes the place of a small chain saw. It comes with 2 blades and the strap. Get it if you have bushes and trees and ryobi/john deere/craftsman.

not quite "there"
Mine wouldn't work, the pruner shaft tube was a bit too long to work when attached to the extension; I disassembled it and cut it down 1/2" shorter and it worked good after that.

Great tool when it works
I used this for a couple of days trimming shrubs and pine trees. It worked great! It's like a sawzall on a stick. I was cutting up to about three inches in diameter limbs. Then one day I was taking out some massive bushes and on the 5th one it stopped working. You could move the blade back and forth with your hand. I went to www.trimmerplus.com to look up the nearest repair center (as instructed in the manual). Everyone on their list said they wouldn't fix it and they don't know why they are in the DB. Then I tried the 800 number service locator. Again... everyone close was either outta business or wouldn't fix it. Finally a customer service rep tracked down a place about 25 miles from me (an autobody shop???). I'm going there today to drop it off. I'll update the post with any relevant info. HTH.

nice tool isnt it?
I invented this thing. your looking at my 1976 school science and drafting project. they use my name EZ Trim. I invented the removeable interlocking shaft system, the tool head, the telscoping shaft system, and the entire concept. got drunk in a chicago bar and talked about it. Here is MY invention. MY name ofr my invention. And i never made a darn cent. Cool isnt it? gotta love corporations. FORTUNATELY I STILL HAVE MORE INVENTIONS TO SELL!! INTERESTED?? EMAIL ME please vote for me to keep me on this page!! i deserve it thanks ... Read more

Features

• Measures 98 inches long, 44 inches high, and 26 inches wide; fits 8-foot log racks
• Log-rack cover; keeps firewood dry
• Made of heavy-duty, coated, weather-resistant fabric; black color absorbs heat to aid in drying
• 2 front access panels for easy loading and removal; 1-year warranty
• Opens and closes quickly with hook and loop tabs and "click-it" closure buckle

Features

• Fast cutting
• The electric advantage
• High performance and rugged construction
• 16" inch bar, 3.0 peak horsepower
• Fully assembled

Features

• Measures 50 inches long, 44 inches high, and 26 inches wide; fits 4-foot log racks
• Log-rack cover; keeps firewood dry
• Made of heavy-duty, coated, weather-resistant fabric; black color absorbs heat to aid in drying
• Front access panel for easy loading and removal; 1-year warranty
• Opens and closes quickly with hook and loop tabs and "click-it" closure buckle

Product Description

High torque grinder quickly sharpens 1/4in. and 3/8in. pitch saw chains. Cam lever chain clamp holds chain steady. 60 Hz electric motor operates on 120 Volts and draws 85 Watts. 5000 RPM max. speed. Comes with one 3/16in. grinding wheel. ... Read more

Features

• 5/8in. Bore
• Model: Midi Jolly
• Uses 7/8in. Bore Grinding Wheels
• Cam Lever Chain Clamp

Product Description

Introduced in 1976, the G1012XT is the original powered precision grinder, and continues to lead the industry in quality. It combines the speed and efficiency of our power grinders with the precise settings of the original File-N-Joint developed by our company founder, Elof Granberg. There are settings for top and side plate angles and tooth length. It is also possible to accurately lower depth gauges. Its high torque, 22,000-rpm motor combined with a mandrel supported by two high-speed micro bearings, mean the G1012XT will give you years of quality service ... Read more

Features

• Provides precision sharpening with consummate ease
• Settings for tilt, depth, angles and tooth length
• Clamps directly on to chainsaws bar
• 22,000 rpm, powered by 12 volt battery
• Includes three grinding stones, 5/32,3/16 and 7/32 diameters

Product Description

72 drive links. Replaces chain in item# 195946. ... Read more

Product Description

56 drive links. Replaces chains in items#s 1970 and 1980. ... Read more

Product Description

The one that started it all. First designed by Elof Granberg in 1954, The File- N-Joint Is the original precision filer. It has settings for top and side plate angles, as well as tooth length. It is also possible to accurately set depth gauges. It has no motorized parts, so it can go anywhere in the field. Constructed in the USA from high quality metal parts, so you can expect it to last. ... Read more

Features

• The original bar-mounted chain sharpener
• Prolongs chain and engine life
• Mounts quickly onto chain bar
• Just add file
• Quality-made in the USA

Product Description

Granbergs Blue Grit grinding stones provide hollow ground edges on Chainsaw chain, ripping chain and Hedge trimmers. Provided three to a pack, use of these stones will significantly lengthen the life of your saw. When used in conjunction with Granbergs Dual-Sharp, they can produce sharper-than-new edges on hedge trimmers. For best results, use with Granbergs G440 Kool-Grind lubrication stick. ... Read more

Features

• Super sharpening power
• Perfect supplement to Granberg powered grinders
• Fits all 1/8 Mandrel grinders, threaded and unthreaded
• Will also sharpen hedge trimmers
• Available in a range of sizes

Product Description

An inexpensive alternative to buying a hedge trimmer, the Clip-N-Trim provides heavy-duty cutting power with a minimum of fuss. Simply bolt the Clip-N-Trim onto the bar of your small chainsaw to cut heavy brush, prune trees, or just trim up those hedges! There are four sizes to choose from, designed to fit 12, 14, 16 and 20 inch bar lengths, all for less than twenty dollars each-considerably less than the cost of a hedge trimmer. A versatile and economically sound addition to your toolbox. ... Read more

Features

• Quickly converts your chainsaw into a hedge trimmer
• Easily bolts on to chainsaws bar
• Fits all lightweight Chainsaws
• Heavy-duty steel construction
• Designed and built in the USA

Product Description

Runs at 22,000 to 24,000 RPM. Includes one stone each of 5/32in., 3/16in. and 7/32in.. ... Read more

Features

• 12V Battery Clips Included
• Takes 1/8in. Diameter Stone Shank

Product Description

Designed by Elof Granberg over 35 years ago, the File-N-Joint is an industry standard for accuracy and durability. ... Read more

Features

• Superior manual chain saw sharpener sharpens all major saw chain pitches
• Accurately lowers depth gauge
• File not included
• Model G-106B

Features

• File Size 5/32in.
• Loop Size 16in.
• Drive Links 56
• Guage .050

Product Description

Makita 181119-A Chainsaw Bar Oil Quart Size ... Read more

Product Description

Innovative unit allows chain sharpening without removing the chain from the bar! Precision, high-powered motor can operate from a 12V vehicle battery great for 'in the field' sharpening. 5000 RPM max. speed. For 1/4in. and 3/8in. pitch chains. ... Read more

Product Description

14" Low Kick Back Saw Cutting Chain, 91SA-52, 3/8" Pitch, .050 Gauge, For 1420, 1425, 1800, 1950, 2000, 2050, 2100, 2300. ... Read more

Product Description

14" 91VG Low Profile Xtraguard Premium C-Loop Chain, 52 Drive Links, Chain Meets ANSI Standards & Is UL Classified, Fits: Stocked Saws 368376, 652054 & 545886, Also Echo, Husqvarna & Poulan Chain Saws, Made In USA. ... Read more

Product Description

14" 91VG Low Profile Xtraguard Premium C-Loop Chain, 53 Drive Links, Chain Meets ANSI Standards & Is UL Classified, Fits Homelite, Sears & Solo Chain Saws, Made In USA. ... Read more

Product Description

14" 91VG Low Profile Xtraguard Premium C-Loop Chain, 53 Drive Links, Chain Meets ANSI Standards & Is UL Classified, Fits Homelite, Sears & Solo Chain Saws, Made In USA. ... Read more