Features

• 5 bushel bag with tow hitch included
• 10HP B&S Intek OHV engine
• 3" chipper capacity with 2 cromium steel chipper blades and 12 replaceable flail knives
• 10:1 reduction
• 10"x4" fully-pneumatic rear wheels

Reviews (1)

Chipper works well, but shredder isn't too effective...
This unit has a great engine - lots of power, starts very easily, runs strong and smooth. The chipper can handle some good-sized branches without bogging down. Another plus is that it is easy to transport with the big pneumatic tires and vertical shredder hopper.

On the down side, the vertical shredder hopper clogs very easily and isn't effective for anything but light batches of leaves. If you try to put small branches in there, you'll get a clog at the bottom and it is a pain to clean out. Also, as with most homeowner-grade chippers, you can't chip long branches unless they're almost perfectly straight. Don't even try and chip scrub-oak branches or others that have irregular shapes. They get jammed every time. ... Read more

Features

• 5 bushel bag
• 6.5HP B&S Intek OHV engine
• 3" chipper capacity with 2 cromium steel chipper blades and 12 replaceable flail knives
• 10:1 reduction
• 9"x2" semi-pneumatic rear wheels

Features

• 6" lockable caster front wheels with 10" x 4" pneumatic rear wheels
• 6.5HP B&S OHV Engine
• 3" diameter chipper capapcity 10:1 reduction with 2 hardened steel blades and 9 hardened cast steel flail knives
• 24" vacuum capacity with 1/4" to 4.75" adjustment height
• 3-bushel bag capacity

Reviews (3)

Once Started, Good Tool for the Money
I have now been using the 6.5 HP Troy Built C/S/V for three months. To make this simple, I'll get straight to the pro's and cons...

Pro's...
1) The factory did an excellent job of packaging and crating the unit for shipment
2) The unit feels substantial and this was reinforced for me as I went through the very simple set-up process (takes about an hour to unbox and set-up)
3) Directions for set-up were flawless
4) Once started, the unit does an excellent job of picking up dry leaves and twigs through the vaccuum nozzle -- it cleared my 1/3 acre yard in about 2 hours (including the time it took me to get the refuse to the street for pick-up)
5) When the suction power of the nozzle is overhwelmed by leaves, it is very easy to unclog the nozzle -- I just use a twig
6) I found that the unit hungrily accepted branches up to 2.5 inches in diameter (I measured) -- the unit does start to bog down on branches larger than this
7) Does a fantastic job of mulching yard waste -- I can't say it does this to a 10:1 ratio like the company claims (how do they measure this?), but I am very please with how few lawn bags I am using this season

Cons...
1) This unit is EXTREMELY difficult to start. For context, I am 6' 2" and before that third helping of Christmas dinner, I weighed in around 235 lbs. My wife, 5' 3" and around 120 (if she reads this I'm a dead man!), was never able to start the unit. I would guess that the pull weight on the starter cord exceeds 60 lbs. Exascerbating the issue is the rather awkward position in which the pull starter is located.
2) Branches can get jammed in the feeder shoot, and the plunger is never quit long enough to drive a lot of branches to the grinding teeth. Freeing these items from the feeder tube can be a frustrating process.
3) Awkward position of zipper on the catch bag makes it difficult to transfer mulched waste into garbage bags

Net/net: If you have a lot of trees and want to save time and think you're man enough to start it ; ) -- BUY IT!

It worked great until...
I bought this product and I used it to do a heavily wooded property. It handled the wet leaves but the twiggs and leaves clogged the inlet. I was able to unclog it with a stick. Plenty of power, for the propulsion and the chipping / vacuum. It worked great until the transmission fell off. I bought it assembled. The bolts just loosened and fell out. Somebody didn't use lock nuts. 2 yr warranty is nice. It's a week now waiting for the parts.

Not bad for the money
I just received this item by freight yesterday so take this review for what it's worth. I was pleasantly surprised the truck driver unloaded it and put it in my garage. It would have been impossible for me to have unloaded it by myself.(see shipping restrictions). This is my second troy-bilt chipper/vac so I can compare them. The first was the 8 hp model purchased about 8 years ago. It only lasted 3 years and then the motor seized. It cost over twice as much and I definitely did not get my moneys worth. So I'm taking a chance on this one. I have about 1 acre with about 30 mature trees, many of them black walnuts so my yard is pretty harsh on equipment.
The shredder/vac portion is fantastic. If I were to rate this product just on that portion it would get five stars. The chipper part is a little disappointing. It seems to have a little trouble with 1 inch twigs. I stopped it once thinking it had finished chipping only to find out I couldn't restart until I took off the nozzle and worked the twig out of the blade.
Other things that drop it from five stars are the seemingly flimsy plastic parts, the bag design and the troy-bilt customer service. Some parts didn't fit together causing me not to be able to start it. I called customer service and had to wait about ten minutes for the guy to tell me to call my local dealer. I don't think it was a toll-free call but I could be wrong. Fortunately I was able to fix it myself. It had shipped from the factor with the safety button assembly upside down.
All said, if it last, I will probably be happy with the purchase. The general design is much better than the 8 hp and the nozzle doesn't seem to get clogged as much. Perhaps the added 1.5 hp made the former a better chippper. ... Read more

Features

• 6-inch lockable caster front wheels; 10-by-4-inch pneumatic rear wheels
• 6HP YardMan XL engine
• 2-inch diameter chipper capacity; 10:1 reduction; 2 hardened steel blades; 9 hardened cast steel flail knives
• 24-inch vacuum capacity; 1/4- to 4.75-inch adjustment height
• 3-bushel bag capacity

Features

• 6 HP Tecumseh OHV engine
• Self-propelled single speed transmission
• Chips and shreds 2in. diameter branches
• Hardened steel knives reduce debris volume 10:1
• Rear pneumatic tires are 10in. x 3 1/2in.

Reviews (1)

Brush Management Extraordinaire
I have 400 feet of privet hedge that is 12-14 feet tall. This tool will eliminate the annual massive project, rented chipper, control effort. Now I can work on it 2 hours at a time (or less). AND it rakes leaves, eliminates yard waste, and washes my car. Well not the last one. But it is very versatile. And it works great. It chips 2 inch green stock and mulches leaves and brush into nothing. The engine is really a full 6 HP. And the chipper chute is designed to allow you to run some forked sticks through it. I can only bog the engine on the very largest limbs. And not that easily. If you wife loves to plant stuff everywhere, you need one of these to stay ahead of it. ... Read more

Features

• 36 heavy-duty double cutting lines, and legs included in carton
• Full one-bushel hopper capacity
• Extra large 21" diameter funnel for easy loading. Unique hopper & funnel design prevents material throwback.
• Fine, medium and coarse settings gives from 8 to 1, down to 30 to 1 particle reduction.
• Lightweight and rugged polyethylene funnel & housing for maintenance free care.

Product Description

Includes tow hitch for easy towing. 10in. x 4in. fully pneumatic rear wheels. A powerful 10 HP Briggs & Stratton Intek OHV engine makes quick work of chipping and shredding branches, leaves and clippings. Feed material into the large, drop-in steel hopper or chipper chute and 12 steel flails and cast iron screen turn leaves, sticks and other light debris into fertilizing mulch and compost. 5-bushel collection bag capacity. Includes 9in. x 2in. semi-pneumatic steel wheels, 1-gallon capacity fuel tank and safety goggles. 2-year limited warranty. Truck ship. U.S.A. ... Read more

Features

• 10 HP Briggs & Stratton Intek OHV engine
• 13-gauge steel hopper
• 3 in. chipping capacity
• Standard tow hitch
• Turns branches and shrubs into useful mulch

Reviews (1)

Drop in branches.... let the chips FLY!!
I bought this unit last week and LOVE IT! Last year I borrowed a chipper from a friend and couldn't wait to return it because I had to force feed it. Not this one. I started it up, inserted branches and out came mulch! It slowed down a little when I put a large (2 1/2") branch but kept on chomping away. I would HIGHLY recommend this unit. ... Read more

Features

• 22-inch vacuum capacity; 3/8- to 4-inch height adjustment
• 5.5HP B&S Quantum engine
• 1.5-inch chipper capacity with 1 hardened steel chipper blades; 2 hardened steel flail knives
• 2 bushel bag capacity
• 8:1 reduction ratio

Product Description

Extra large 21" diameter funnel of this ultimate mulcher allows more material to be fed into the bushel-size hopper, with an inner lip to prevent debris from escaping. Coarse to fine adjustments include special settings for grass clippings, thatch and pine needles. An elastic bungee cord holds your leaf bag firmly around the base for upright collection. Tilt adjustment varies the angle of the hopper up to 45-degrees for easy loading. Motor tilter removes for easy cleaning. (40 pounds). ... Read more

Product Description

Ideal for cleanup, gardening and landscaping. Powerful 10 HP Briggs & Stratton INTEK engine drives 24 free-swinging hammers; they flip and reverse to provide 4-times more useful working life. Extra-large 18in. x 17in. hopper opening has hinged lid with safety blowback shield. Centrifugal clutch for easy, no-load starting; engages when engine reaches shredding speed. Includes ear protectors, safety glasses and work gloves. Truck Ship. ... Read more

Features

• Move by hand or tow behind a lawn and garden tractor or mower

Features

• Self-propelled unit has 3 forward speeds plus reverse!
• Vacuum whisks up leaves and lawn debris!
• Chipping blade handles branches as thick as 2 7/8in.!
• Large 8in. x 1 3/4in. semi-pneumatic front wheels; 10 1/2in. x 3 1/2in. pneumatic rear tires

Product Description

Works on the principle of evaporationthe weight of the mist settling on the stainless steel screen turns off the solenoid. When the water evaporates, the leaf rises and the cycle starts again. ... Read more

Features

• MISTER FOR GREENHOUSE IRRIGATION

Product Description

Vacuum Hose Attachment for #170552 ... Read more

Product Description

Our Electric Mulching Vacuum keeps your patio, deck and driveway neat and tidy.The 7" diameter rubber wheels easily roll over any hard surface. Debris is ground and deposited in a removable 8-gallon dry collection bag for routing to the trash or compost pile. Great for brick, concrete, wood, low pile carpeting, tile, and other outdoor surfaces. Powered by a 1.25 HP electric motor, UL listed. 19 lbs. ... Read more

Product Description

A powerful 6.5 HP Briggs & Stratton Intek OHV engine makes quick work of chipping and shredding branches, leaves and clippings. Feed material into the large, drop-in steel hopper or chipper chute and 12 steel flails and cast iron screen turn leaves, sticks and other light debris into fertilizing mulch and compost. 5-bushel collection bag capacity. Includes 9in. x 2in. semi-pneumatic steel wheels, 1-gallon capacity fuel tank and safety goggles. 2-year limited warranty. Truck ship. U.S.A. ... Read more

Features

• Turns branches and shrubs into useful mulch
• 2-way feed for easy and versatile use

Features

• Rake in drop down chute
• 8HP Tecumseh XL engine
• 3" chipper capacity with 2 hardened steel chipper blades and 12 replaceable flail knives
• 2.5 bushel bag capacity
• 12:1 reduction ratio

Features

• 2-year limited warranty; 90-day no-fault consumer warranty; safety glasses included
• Chipper shredder; eases the task of cleaning up and disposing of lawn debris
• Features 3-way feed, with dedicated chipper chute, drop-down rake-in chute, and drop-in hopper
• 5 hp engine; 2-inch chipper capacity; 2 hardened steel chipper blades; 12 flail knives
• 2-1/2-bushel bag attaches easily to unit; clippings bagged at 10:1 reduction ratio

Product Description

Strong, durable machete has 12in. blade length, 21in. overall. Unique style tapers from 4 1/2in. wide at the tip to 2 1/2in. wide at the handle. ... Read more

Product Description

The perfect size for so many applications! The industry has been demanding a durable, reliable machine! Comes standard with swivel discharge chute and adjustable deflector. Four reversible chipper blades, mounted to a 20, 1 1/4 inch thick 140 lb disc for mass and momentum to devour branches and small trees! Highway towable for your convenience on the job. ... Read more

Features

• CHIPPER BEAR CAT 13HP HONDA

Product Description

The perfect size for so many applications! The industry has been demanding a durable, reliable machine! ... Read more

Features

• CHIPPER BEAR CAT 20HP HONDA ELECTRIC START