Features

• Scales make set up easy
• Set your stop where you want it
• Adjust the scale it can be repositioned

Product Description

Used to repair moulding, decorative trim, countertop edging and veneer strips. Right angle screw can apply clamping load at, above, or below center on work of varying thickness and over or around obstructions. Heat treated iron frame, 3/8" diameter screws, two steel sliding pin handles, one steel thumbscrew handle, steel swivel securely fastened to screw revolves freely. 2 1/2"x2 1/2" opening capacity, 800 lbs. normal load limit. ... Read more

Features

• Frame heat treated
• 2-1/2" Opening capacity
• 3/8" Diameter screws
• Swivels are bright plated steel, securely fastened to screw, revolving freely

Product Description

Excellent for cabinetmaking, furniture assembly and framing, these clamps are designed to consistently hold and secure stock at a 90° angle. Clamps uneven thicknesses. ... Read more

Features

• Soft-Grip beveled handle
• Heat treated bar
• Double threaded screw thread

Features

• Comfort cushion pistol grip
• Powerful, fast and easy to use
• Heavy Duty steel bar
• 3-5/8" throat depth
• Quickly converts from clamp to spreader

Features

• Easily converts to a spreader
• 4-1/4" max. jaw opening, 1-3/16" throat depth
• Soft, durable pads protect delicate work, great for hobby work
• Lightweight, strong, high-tech resin material
• Handles designed for comfortable hand-span

Reviews (2)

Model Builder's Essential
If you build scale models and other miniatures, you will find that two or more of these clamps are part of your essential kit. They are about the closest thing you will find to untiring fingers. They can hold softly or as firmly as any screw clamp. The parts and pads seem impervious to model making solvents and chemicals.

I also use them as a simple hand vice. Fixtures and jigs that utilize clamping can be taped to the jaws. The main bar can be replaced with a brass strip if you need a greater reach, but also need the smallness of these jaws. Household repairs? No. The slightly stouter Quick-Grips are much more rigid. These are for very light work and are the right tool for the delicate work of model building

I'd give a sixth star if I could!

Quick clamps
These quick clamps work great. They are very easy to quickly bring to the right size and then squeeze with one hand to tighten the clamp. As someone who works alone most of the time, being able to clamp one handed is a big help. ... Read more

Product Description

Make your own custom Handscrews. Each kit includes two opposing threaded rods, four barrel nuts and two hardwood handles with metal ferrules. Size indicates rod length. Instructions included. ... Read more

Features

• Clamping, Spreading
• Bar 1/4" X 3/4" Plated, Round-Edge, High Carbon Steel
• Patented, Heat-Treated Sliding Head Maintains Superior Applied Force
• Design Features In-Line Advancing Handle For Ease Of Use; Permits Greater Travel Per Squeeze.
• Spreader Clamp Feature Provides Double The Utility Of Comparable Clamps.

Features

• Instant opening and closing
• Pressure adjustment from 1-50 lbs.
• lightweight
• Soft pivoting jaw
• Gluing models, crafts, etc

Features

• Stable clamping surface for edge gluing
• 60 inch opening
• 1-3/4 inch x 3-3/4 inch faces
• Strong
• Lightweight

Product Description

HOLD DOWN CLAMP FOR T-SLOT TRACK ... Read more

Features

• Most Popular C-Clamp
• Ductile Iron Frames
• Designed for Craftsman, Woodworker and light Industrial Use

Features

• Multiple Clutch Disc design
• 8" opening with 2" reach
• Two clamp pads standard with clamp
• Solid steel swivel
• Fixed head is pressed and riveted

Reviews (1)

Hi I'm Bob
I'm a certifiable clamp junkie & I prefer the Jorgensen line. I've strayed off the straight & narrow occasionally & tried other brands but I've always come back to Jorgies. Simple & bullit-proof, nice thick cushy pads & a clutch system that engages without fuss every time. The minis are great for light duty clamping, getting into tight spots & setting up jigs. For these jobs I like the 8" length, not too short & not too long. I think Jorgensens design is as good as anyone's, their quality control consistantly a cut above & their price a little easier on the pocket book. Jorgensens definitely see the most use on my workbench. Now if I could just find a woodworkers anonymous meeting........ ... Read more

Features

• Non marring pads
• Patented profile rail
• Non-slip locking device
• 1 beam design
• Zinc finished drawn rail

Features

• Double-rolled thread for faster clamping and increased durability
• Larger swivel pad reduces marring on work surface and increases stability
• Larger handle for greater clamping pressure with less effort and reduced hand fatigue

Product Description

BABCO Ratcheting Bar Clamp and Spreader. One-Handed Operation - 2-inch Deep Throat - Reversible Front Jaw for Spreading. 12-inch capacity ... Read more

Features

• Ratcheting Bar Clamp and Spreader
• One-Handed Operation
• 2-inch Deep Throat
• Reversible Front Jaw for Spreading
• 12-inch capacity

Features

• Full lifetime warranty
• 4-1/4" max. jaw opening; 2-pack
• Quick-Grip Micro Bar Clamps have positive locking action to hold work tight
• Ideal for clamping small and odd shapes securely for home, crafts or hobby work
• Quick-Grip Micro Bar Clamps can also be used as spreaders

Reviews (1)

Good clamps, but there are better on the market!
These are handy little Quick-Grip micro clamps have a lot of gripping power for their small size and weight. The ability to use them as a spreader clamp (by reversing the front clamp pad) is a nice feature. I use mine for building small models and the odd little project. These would be great if you are also into crafts, as they are much easier to use than small c-clamps and generally weigh less. The best feature of this product is its ability to quickly adjust/clamp/release single-handedly. The yellow colored rubber jaws are great, dissipating the pressure over a large area so as not to damage your work, and best of all, glue will not readily adhere to them. I've exerted tremendous force with these clamps and have never had one slip or flex/deform under pressure. I have four of these in my shop and find them very useful.

Why did the Quick-Grip Micro's only receive 4 stars you might ask? The answer is simple - the Jorgensen micro "E-Z Hold II Mini Bar/Spreader Clamp" is a superior clamp in my opinion, because it has a greater capacity, is less expensive, and best of all, the front clamp pad is adjustable so you can "balance" the clamp on your project if need be. The E-Z Hold II mini will do everything the Quick-Grip micro's will, only quicker, because, unlike the Quick-Grip, the front pad on the E-Z Hold doesn't require any tools to remove or adjust it. This feature makes the Jorgensen E-Z Hold the superior "small" clamp. ... Read more

Product Description

Designed for light-duty, these bar clamps are ideal for gluing and general purpose clamping. 2" throat & 3" throat. ... Read more

Product Description

9 times faster than a C-clamp! Deep throat clamp has greater reach and a quick sliding arm. High carbon tempered steel screw for greater load capacity, long service life and spatter resistance. Mounted pad. ... Read more

Features

• Clamp Pressure 2660 lbs.